All Imenco Guidewire Anchors are ROV releasable, and have as emergency / alternative release with a shear pin arrangement. The Anchors are made from high strength stainless steel and have lifetime exceeding 20 years when normal maintenance is followed. Spare parts and auxiliary equipment available from stock. Documentation and certification for more info contact Al Cohen,MBA-VPof Business Development at 713-480-7777 or ac@imenco.com

1. MECHANICAL MIDI LOCK LATCH
FOR ”LIVE-BOAT” HANDLING OF ROV’s
Improve the safety and ”well being” of your expensive equipment
and valueable personnel. The midi-latch will ease deployment and
recovery of Work ROV’s to 5 tons (and other equipment carrying
a messenger line) plus increase overall safety and health.
The midi lock-latch enables easy attachment/detachment to your tether using it’s uni-
que cable entrance door solution.
General description:
Made from Aluminium 6082T6 and S165M steel, the midi-latch weighs only 42 kg in air!.
The unique cable door and release mechanism makes it very easy to use. It will self-release in water by
attaching a medium sized ”Grimsby float” to the release lever, or you may choose to use a release line.
The latch unit will attach to its accompanying termination bullet sliding on the umbilical cable even down
to a 30º angle above the horizonontal. Feedback from our customers is very good, where they all point
out the advances this unit gives compared to other launch/recovery methods unsing a ”live-boating”
ROV. The unit may also be used for other applications, where there is a messenger line attached. The
midi-latch is the medium size in a range of latches from 0 to 12 tons SWL. The Latch and Termination
bullet are designed according to DnV Rules for Certification of Lifting Appliances.. The Midi latch and
the termination bullet are delivered as a certified pair and the termination bullet may be tailored to fit the
equipment in question. See lower section of above photo.
Technical data:
Safe working load: 5 ton SWL
Dynamic factor (DAF): 3
Weight in air: 42 kg
Materials: Aluminium 6082T6, S165M and 316SS
Umbilical/tether size: up to 50 mm diameter
Imenco AS P.O. Box 2143 Tel. +47 52 86 41 00 E-mail address: Homepage
Stoltenberggt. 1 N-5504 Haugesund Fax. +47 52 86 41 01 imenco@imenco.no www.imenco.no