Transcript of "App201 en non-contact-cutting-edge-measurement-during-production-process"
A201_eOptical MicrometeroptoCONTROL Non-contact cutting edge measurement during production processCutting discs for the metal working industry are amongst PC for further evaluation. The target object is assessedthe most common wear parts. In modern production, very quickly as the latitude is displayed graphically.turned parts are manufactured to sub-micrometer preci-sion. In order to ensure the accuracy of the machine toolrequested, precise positioning of the tool is necessary,including the cutting discs. Benefits for the customer:Carbide cutting tool specialist Ceratizit relies on a meas- - Simple, mobile and economically designedurement system that uses the optoCONTROL 2500 sen- constructionsor during production control of the cutting discs. The - Fast, non-contact object assessmentmeasurement set up was designed and developed by - Measurement adapter for various cutting widthsBenzing Feinwerktechnik GmbH. The vertically mounted - Semi-automatic functionalityoptoCONTROL 2500 sensor traverses along the meas-urement object supported by a pneumatic processingunit. Operating on the shadow principle, the measurement Requirements for the measuring system:system detects the width of highly sensitive cutting edges - Measurement ranges 8-14mmin order to offer reliable measurement results with respect - Resolution ±1µmto the distance and height of the cutting edge lines. Thedesign of the measurement system is both simple andcost effective. Furthermore, the system can be used asa mobile unit. Since the wear-free system works withouttouching the cutting disc, it has a minimal measurementtime. The measurement data detected is transferred to aMicro-Epsilon A member of micro-epsilon groupKönigbacher Strasse 15 Tel. 0 85 42/1 68-0 email@example.com Certified DIN EN ISO 9001 : 200094496 Ortenburg Fax 0 85 42/1 68 90 www.micro-epsilon.com Modifications reserved / 9781201-A011110FHF