Installation Of Lotus Notes 7.0.3 Client
The lotus notes client software ver 7.0.2 is provided to you on the CD. In order to install the
software you need to insert this CD in one of the PC, Laptop or Server where CD-ROM is
available. To install the software on other PCs you can share the CD-ROM by performing
the following task.
1) Double click on My Computer icon on your desktop. Right click on the CD-ROM
drive and click on the Sharing option as shown in the figure
2) After you click on the Sharing option you will get the following screen, which will
allow you to give the share name. Click on the Share this folder option and give the
share name as CDRom and click on Apply box and then click OK.
3) My Computer screen will appear again and you will see a sharing hand in blue
colour on the drive letter of CD-ROM. The hand appears similar as shown in the
figure. In figure the sharing drive is the C: drive. This is given just for
understanding the sharing process.
4) Now come to the PC where you wish to install the Lotus notes client double click
on My Computer icon on the desktop screen, point your cursor to Tools and click
on Map Network Drive… as shown in the figure
5) After you click on Map Network Drive the following screen will appear.
Please remove the tick from the option Reconnect at logon. In the drive box select the
drive letter. As shown in the above figure as Drive E:
In the Folder box type the path of the share created in step no 1 & 2 respectively i.e
CDRom. The IP address after the two slashes is of the PC, Laptop or Server on which
the CD drive is shared. The portion after the IP address slash is the share name i.e
CDRom. Finally click on the finish button, and you will again come back to My
6) In My Computer screen you will see new drive letter with E: and the share name.
Double click on this drive letter and you will get the following screen.
Double click on the Setup icon.
7) Setup will launch Install Shield Wizard “Preparing to Install” as shown in the
Immediately after this screen a new screen of Welcome to Installation Wizard for
Lotus Notes 7.0 will appear as shown in figure.
Click on Next to begin the installation of the Lotus Notes Client
8) A screen with License Agreement will appear, which will be same as shown in the
By default, the license option I do not accept the terms in the license agreement is
selected. Choose the option I accept the terms in the license agreement as shown in
the above figure of license agreement
9) The installation screen will move ahead, and the next screen will be to fill up the
customer information. The screen will be similar as shown in the below given
In the User Name box type the name of the user on whose computer the lotus notes client
is being installed.
In the Organization box type the full name of the organization as Birla Sun Life Insurance
Select the option anyone who uses this computer (Multi-User Install) and click on next.
10) A screen will appear to select the installation path of the lotus notes client software
as shown in the below figure.
Lotus notes has to be installed in D: and path has to be kept as D:LotusNotes.
Incase if any other path is selected by default, it has to be changed by clicking on the
Change box. Once done click Next to complete the installation process.
NOTE: Incase if the installation is done on the Laptop then the only available drive
is C: in that case you have to select the default available drive i.e. C:
11) A Custom Setup screen will appear. Please click next to continue the setup without
modifying this screen as shown in the below given figure
12) Ready to install the program screen will appear in which the option Make notes my
default program has to be selected as shown in the below figure. Click next to
continue the installation
13) Installing Lotus Notes 7.0 screen will appear as shown in the below figure. Please
do not disturb the installation at this point of time. The installation screen will check
the status and then start copying files.
14) Finally, the Install Wizard Completed screen will appear and you will be prompted
to click on the Finish option to complete the installation as shown in figure
15) After you finish the installation, Lotus Notes 7 icon will be created on the desktop
as shown in the figure.
Back to Lotus Notes
Configuration Of Lotus Notes Client 7.0.3
The users who are having the official email id (i.e.
FirstName.LastName@birlasunlife.com) will have their id file for authentication. The
domino administrator will provide the id file of all the users pertaining to your
locations to you. Please ensure that you copy the id file of particular user on to the PC/
Laptop before you begin the configuration process. The id file has to be copied in
lotusnotesdata folder. The IP Address of your Domino Server is 10.155.1.52 and
the name of your Domino Mail server is BSLIAHULN01. This information has to be
added in the hosts file of the machine. Please follow the instruction on how to enter
these details in the hosts file.
1) Point your mouse cursor to StartRun and in the box type drivers as shown in
the figure and press enter.
2) A screen similar to the one given below will appear. Select the etc folder and double
click the folder.
3) A screen containing the hosts file will appear. To open the hosts file, Right Click the
mouse, select the Open With option as shown in the below given figure
4) A screen prompting to select the program to open the file will appear, please select
notepad from the available options of programs as shown in the figure.
5) Once you open the hosts file, put the entry as shown in the figure. The entry will be
IP address (10.155.1.52) and the name of the Domino Server (BSLIAHULN01)
NOTE: As mentioned earlier the IP Address and the server name of the
Domino server, kindly enter that same information in the manner shown in
below figure. Pressing the TAB key on the keyboard represents the space between
the IP address and the server name. Also you need to enter one more entry as given
to you in the hosts file
Save the file and close the file.
6) Double click on the Lotus Notes 7 icon on your desktop a Welcome screen similar
to the one shown in below figure will appear. Click Next to begin the installation
7) Lotus Notes Client Configuration screen similar to the one as shown in figure
below will appear. In the User Name box type the name similar to that of Lotus
notes id provided to you. In the Domino Server box type in the name of the server
i.e. BSLIAHULN01. Select the option I want to connect to Domino Server
NOTE: This information will be provided to you by Domino Administrator
After filling in the entire information click Next to move ahead with the
8) A Notes ID file screen will appear and will be similar to one shown in the below
Click on Browse option and select the id file, which is copied in the
lotusnotesdata folder at the beginning of the configuration process. Click on
next to carry on with the configuration process.
9) The configuration screen will show a screen with the entire path of the id file as
shown in the figure. Click on next
10) A screen prompting for password will appear, please key in the password as
provided to you by the Domino Administrator. The screen will be similar to the one
shown in the figure below. The XXXX characters represent the password in
Click on OK
11) In the Setup Instant Messaging screen remove the tick as shown in figure. We will
not be using this option. Click on next.
12) In the Additional Services screen click on the Finish button to complete the
configuration part of lotus notes client software
13) A Notes Setup Completed screen will appear as shown in figure. This means you
have successfully done the configuration of the lotus notes client. Click on OK.
14) The Lotus notes home page will open and will appear same as shown in the figure.
15) On the above screen click on the option No thanks, just give me the defaults.
Back to Lotus Notes
Setting up Replication of the users mail file
1) Once you finish the “Configuration of Lotus notes client” section, the next step is
to get your mail file replicated from the Lotus Domino Server. Please follow the
process to enable the replication. The next screen appearing will be similar to the
one shown in below snapshot.
2) In the above screen if you notice the arrow is pointing to calendar icon, just below
calendar there are many icons, move your cursor on the icons one by one and you
will notice a Database icon as shown in below snapshot
3) The screen similar to the above snapshot will appear, drag and drop the Workspace
Tab in the area where the Database icon is located. After this activity the Workspace
tab will also appear in the line as shown in the snapshot.
4) Click on the workspace tab and the following screen will appear.
5) Locate the icon with your name on the screen. If you notice in the above screen it
should appear as ImranHunerkar on birlavmn. ImranHunerkar is the name of the
employee and birlavmn is the name of the server. In your case the server name will
appear as BSLIAHULN01 instead of birlavmn. The first user whose Lotus note is
configured will see his icon in the workspace. For other users you need to follow
the steps given in Opening Database for other users sections.
6) Right click on the icon with your name and select the options as shown to you in
the snapshot below
7) The following screen will open which will prompt you to give the file name and the
locations to save the file. By default the name of the mail file will be same as your
mail id. Keep the settings same as shown to you in the snapshot
8) The next screen appearing will be Replication screen; this screen will show you the
replication status of your mail file. The snapshot of the replication status is given
just below this screen.
9) After the replication is completed you can go back to workspace tab, and then locate
your icon you will see a small arrow just on the right top corner of your mail file icon.
Click the arrow and select the local option, after which the mail file icon will change
to Employee name on Local.
10) You can start accessing the mails by clicking on the icon just created in step no 9.
Back to Lotus Notes
Creating location document for Users
Location document is actually the profile of the individual user. The location document
contains the information of the user logging in to Lotus notes. This is helpful incase if
more than one user intend to access the lotus notes mails from single PC.
Please follow the guidelines to achieve the same.
1) On your lotus notes screen go to File Mobile and click on Locations as shown in
1) The Location screen will open as shown in the figure. In this you need to key
the information in the tabs that are circled and the detail information is for each
tab is given in the separate diagram.
First time when the location document is opened it will appear same as shown in the
below snapshot. Some changes are hard coded and can be only changed by selecting the
drop down arrows
Information to be filled in the BASIC Tab
Information to be filled in Server tab
Information to be selected in Ports tab
Information to be selected in Mail tab, the details given below is the first time screen you
will get once you click on the Mail tab. The screen shot just below this snapshot contains
the details to be filled in the Mail tab
Details to be filled up in Mail tab.
The option that is circled should contain the name of your mail file that was
created at the time of replication.
NOTE: Only the name has to be changed, rest everything remains same
Information to be filled up in Replication tab (For all the tabs please fill the
information as provided to you)
The last tab to fill in the information is Replication after you have filled in the
given information you need to click on Save & Close options as shown with the
help of mouse pointer.
Back to Lotus Notes
Opening Database for other users
You need to login with the Lotus notes id of the user whose mail file you are about to
open. Ensure that you have copied the Lotus notes id file in lotusnotesdata folder as
you had done for the first user. Please follow the steps given below
1) Point you cursor to FileSecurity and select Switch ID option
2) Select the ID file and click OK
3) You will be prompted to key in the password. By default the Domino
Administrators are keeping the password as pass and employee code (e.g.
4) After you login point your cursor to FileDatabaseOpen and the following
screen will appear in front of you. This is the default screen.
5) In the box just below the server option, instead of local you need to select your
domino mail server name (BSLIAHULN01). Click on the drop down arrow and select
the domino server name. If the name is not appearing you can type the name in the
box as BSLIAHULN01/Srv and press enter.
6) In the database section scroll down your screen and select the single click on the
7) Locate and select the name of the user whose mail file you want to open and click
8) After the mail file is open you need to create the Replication and location
document which is shown to you in the section Setting up Replication of the
users mail file and Creating location document for user
Back to Lotus Notes
Address Book Replication
The address book has to be replicated in the same manner as you will be
replicating the mail file. Locate the icon Birlasunlife’s address book on
BSLIAHULN01 and follow the same instructions.
Ensure that the replicated file is saved in location lotusnotesdata.
After the file is replicated please follow the following steps so that the address
book is available on your lotus note clients.
1) Go to File Preferences User preferences and the following screen will appear.
2) In the above snapshot expand the Mail option by clicking your mouse on the +
sign. The screen options will change and will appear as given to you in the below
3) In the Local address books section which is circled in the above diagram, key in the
name of the address book file which you have just replicated. Incase if there is any
other name you need to put comma and then add the other name. Or you can click on
the browse button and locate the file.
Back to Lotus Notes
Guidelines to be followed
1) Secure Application Portal
2) Printer settings for Receipt Writer
3) Links for various applications
4) Contact details for various applications
Back to Main
Secure Application Portal
1. Connect to Internet and type the Site address https://sap.bsli.in/ in Internet
Explorer (Check Minimum System Requirements). Once you are connected to the
site, you will get Security Alert Message as shown below. Click on ‘Yes’ to proceed.
Note: Do clear IE Temp. Files and cookies before logging to site. (How to clear
temp file & cookies)
2. You will get login screen as shown below. On the Login screen will get login and
password with Realm option. (Use the same the username and password of BSLI
Domain, which you use for Login to your Computer in branch or Contact Your
Branch FM Engineer for BSLI Domain Username and password)
In Realm Option you will get two pull down menu as Intranet and WebMail Only,
• When you select “Intranet” Option, you can Access BSLI Applications, (i.e. Ingenium, BSLI
Online, Receipt Writer, BSMS Work Flow & Mails etc.). For this your machine must
compliant with BSLI Security Policy for Minimum System Requirements, Else Access will be
• When you select “WebMail Only” Option, you will get only webmail portal to check your
mails via Internet Explorer from Any PC (i.e. Home PC, Cyber Café or Office laptop)
3. For the First time only, on the PC from which you are accessing the Portal with Intranet access
type Option; it will start Downloading SSL VPN Software. (Note: Sometime IE Pop-Up blocker may
block the popup window for Installation, which will appear below the Address Bar as shown in
below image, click on Install ActiveX Control.)
4. Select Install to start the Installation.
5. It will download Applications required for SSL VPN (The Download speed depends on your
Internet connection speed)
6. After successful logon, it will install Secure Application Manager.
7. After successful login and Security Policy Check, you will get access to Intranet Applications.
8. When you select web mail access you will get Web Mail Link.
9. To Change the SAP Portal Login Password:
Click on the Preferences Link on the Top Right hand side of Portal.
Then click on General tab, which will provide you the change password option.
• System Requirements:
• Click to view Operating System requirement
• Click to View Antivirus requirement
• Click to View Internet Explorer requirement
• One of the following Operating System Require:
1. Windows XP With Service Pack 2
2. Windows Vista
3. Windows 2000 Professional with Service pack 4
To check Version of Operating system:
1. Go to Start > Run > Type winver > Press ok
• McAfee VirusScan Enterprise 8.0 or greater should be installed with Latest Virus
To check McAfee Antivirus version and Virus Definition:
• Internet Explorer Version should be 5. 5 or Greater with Cipher Strength: 128 bit:
To check Internet Explorer Version
Open Internet Explorer > go to Help > About Internet Explorer
• To clear IE Temp Files and cookies:
Go to Internet Explorer > Tools > Internet Options >General Tab
Select Delete Cookies and Delete files option as shown in below figure.
Back to Guidelines
Receipt Writer setting
LQ 1150 EPSON PRINTER SETTINGS FOR WINDOWS-XP
Connect the EPSON Dot Matrix Printer to the PC thro Printer cable. If it’s Win XP then it
will detect the Printer. Do install the drivers for the printer from the CD, which came
along with New Printer. Its must that proper driver of printer should install else Receipt
Writer setting doesn’t work properly.
Goto Start > Settings > Printer and faxes
You will see window similar as shown below:
Goto File > select Server Properties
Print Server Properties Dialogue Box will open as shown below:
Tick On Create a new form box.
Type Form name: Rewriter
Put the Form description (Measurements) settings as shown below.
Then click on Save Form Button. Then Apply and click OK.
Right Click on Epson LQ-1150
printer in Printers and Faxes
Option. (Keep Dot matrix
printer as Default printer.)
Goto Device Settings Tab,
select Tractor Feed : Rewriter
as shown below
Open Internet Explorer go to
receipt writer Site
Go to File > page setup
Page setup window will open as shown below,
Select paper size: Rewriter
Keep Header and Footer Blank
Put Margins as shown below click Ok.
Now you can put Receipt to printer and take Printout
Back to Guidelines