SlideShare a Scribd company logo
1 of 4
Download to read offline
International 
OPEN ACCESS Journal 
Of Modern Engineering Research (IJMER) 
| IJMER | ISSN: 2249–6645 | www.ijmer.com | Vol. 4 | Iss.10| Oct. 2014 | 34| 
Fatigue Analysis of Acetylene converter reactor K. J. Bhesaniya1, D. N. Jadhav2, R. K. Jain3 1&2 Department of Mechanical Engineering, Sardar Patel College of Engineering, Mumbai 3HTAT Department, Toyo Technology Center, Mumbai 
I. Introduction 
An acetylene converter is a Catalytic reactor. The behavior of the catalyst in reactor is with high- pressure and temperature petrochemical processes. Acetylene is a byproduct of modern ethylene production processes, and it acts as a poison to the catalysts used for making polyethylene out of the ethylene product. Due to the above reasons, polymer-grade ethylene product should contain no more than 5 ppm of acetylene. [1] There are many transients considered in the design stage. Their effect on the structural integrity should be addressed in the licensing documents in the form of a design report. Therefore in this study, an analysis procedure for fatigue analysis is suggested that includes thermal and structural analysis. For the transient thermal analysis, the thermal transient data are simplified to prepare a straightforward input deck. The most severe instances are found considering the total stress intensity range and the stress levels at those times are obtained along with the applied pressure [2]. These values are then used in a fatigue analysis to determine the final cumulative usage factor. Example analyses are performed for the acetylene converter reactor for arbitrary transients, and two acceptance criteria, the peak stress intensity and cumulative usage factor, are investigated. 
II. Analysis 
2.1 Finite element model The acetylene converter reactor is considered in this study. It is made of ASME SA-516 Grade60 Class1 material. Flanges are not included in the model in this study, which should be investigated separately in detail. Two finite element models are developed for a transient thermal analysis and a structural analysis using software. For the thermal analysis, 2-D thermal solid elements are used in the reactor vessel. This element can be used as an axisymmetric element with 2-D thermal conduction capability. It has eight nodes with a single degree of freedom, the temperature, at each node [3]. Six elements exist in the radial direction of the shell to represent the profile of the result in a manner suitable for generating sufficient information in the ensuing analysis. For the structural analysis, 2-D structural solid elements are used, as shown in Figure 1. These types of elements are used for the 2-D modeling of solid structures. They can be used as axisymmetric elements [3]. An element in this case is defined as having eight nodes with two degrees of freedom for each node; these are the translations in the nodal x and y directions. Symmetric boundary conditions are imposed at the center nodes of the upper and lower heads. In addition, one node is fixed in all directions so as not to generate rigid body motion. 
Abstract: The structural integrity of mechanical components during several transients should be assured in the design stage. This requires a fatigue analysis including thermal and structural analysis. As an example, this study performs a fatigue analysis of the acetylene converter reactor during arbitrary transients. Using heat transfer coefficients determined based on the operating environments, a transient thermal analysis is performed and the results are applied to a finite element model along with the pressure to calculate the stresses. The total stress intensity range and cumulative fatigue usage factor are investigated to determine the adequacy of the design. 
Keywords: Fatigue damage factor, FEM, Reactor Pressure Vessel, Smooth Bar Method.
Fatigue Analysis of Acetylene converter reactor 
| IJMER | ISSN: 2249–6645 | www.ijmer.com | Vol. 4 | Iss.10| Oct. 2014 | 35| 
Fig. 1 Axisymmetric model of a reactor pressure vessel 2.2 Loading Cycle Several transients are considered in this study, as start-up and regeneration. These are arbitrarily chosen for the fatigue analysis. The typical pressure and temperature history for the plant regeneration processes is shown in Figures 2. 
Fig. 2 Pressure and Temperature Histories of the Regeneration Process 2.3 Thermal analysis To obtain the temperature distribution in the shell and head of the vessel and skirt, transient thermal analyses are performed for each transient defined previously. In this analysis, temperature versus time graph of reactor is given as temperature loading. As heat is transferred from solid structure into insulation and that heat is transferred from insulation to atmosphere by convection. Near a vessel skirt juncture, heat is transferred by radiation. Temperature Distribution near Skirt to Head Juncture is shown in figure 2. 
Fig. 2 Temperature Distribution near Skirt to Head Juncture
Fatigue Analysis of Acetylene converter reactor 
| IJMER | ISSN: 2249–6645 | www.ijmer.com | Vol. 4 | Iss.10| Oct. 2014 | 36| 
2.4 Stress analysis In this analysis, for this model Pressure versus time graph is applied as pressure loading and temperatures from thermal analysis browsed for every sub –step. Model is designed in axisymmetric. Stress results are shown in figure 3. for regeneration cycle. 
Fig. 3 Stress versus time plot 
III. Fatigue Assessment 
Cycle counting is used to summarize (an often lengthy process) irregular load-versus-time histories by providing the number of times cycles of various sizes that occur. The smooth bar method is used in this study. The total stress at each peak stress locations was read directly from the finite element output and is taken as the equivalent stress range ΔSp,kfor the component [4]. 3.1 The alternating stress The effective alternating equivalent stress amplitude (Sa) is calculated for the cycle using the equivalent stress range ΔSp,kfor the component. The Poisson correction factor, Kv,kneed not be used if the fatigue penalty factor, Ke,k, is used for the entire stress range (including ΔSLT,k)[5]. Hence the alternating stress is given by following equation 푆푎= 퐾푓∗퐾푒,푘∗Δ푆푝,푘 2 3.2 The permissible cycle To calculate the permissible number of cycles, Nk, from the alternating equivalent stress computed, using the fatigue curves provided in Annex 3.F.[5] The allowable number of cycles for each component is calculated using Equation (3.F.1)[5] 푁=(10)푋 Where, 푋= 퐶1+퐶3푌+퐶5푌2+퐶7푌3+퐶9푌4+퐶11푌51+퐶2푌+퐶4푌2+퐶6푌3+퐶8푌4+퐶10푌5 Y= 푆푎 퐶푢푠 퐸퐹퐶 퐸푇 ET= the material modulus of elasticity at the cycle temperature EFC= the modulus of elasticity used to establish the design fatigue curve CUS = 6.894757 for units of stress in MPa. (Conversion factor) For the vessel materials of construction, the coefficients Ci and the modulusEFCare taken from the Smooth bar fatigue curve for carbon steel σuts≤ 552 MPA are listed in table 3.F.1.[5] Table 1 Allowable number of cycles, Nk 
3.3 Calculation the fatigue damage factor 
Component 
Location 
ET(MPa) 
EFC(MPa) 
Salt,k(MPa) 
X 
Nk(cycle) 
Skirt 
Skirt ring at inside corner 
190E03 
195E03 
106.2 
5.414 
2.59E05
Fatigue Analysis of Acetylene converter reactor 
| IJMER | ISSN: 2249–6645 | www.ijmer.com | Vol. 4 | Iss.10| Oct. 2014 | 37| 
The actual number of repetitions of the cycle is set to the cyclic life requirement provided in the User’s Design Specification, 20000 cycles. The fatigue damage for the is then calculated by 퐷푓,푘= 푛푘 푁푘 ≤1 This result in calculated fatigue damage for limiting region (Skirt ring at inside corner) is 0.077. The fatigue damage is well below the allowable level of 1.0, satisfying the requirement. 
IV. Conclusion 
For a transient thermal analysis, the thermal transient data are simplified to prepare a simple input deck. The most severe instances are found considering the satisfaction of total stress intensity range, and the stress levels at those times are obtained along with the applied pressure. These values are then used in the fatigue analysis to determine the final fatigue damage factor. Example analysis of the acetylene converter reactor is performed for postulated arbitrary transients and generating the following conclusions: 
 The fatigue damage factor is well below the allowable level of 1.0 
 The major contribution to the fatigue usage factor is temperature variations during transients. 
 No effect of pressure loading on the fatigue factor arises inside of the vessel. 
 
Acknowledgment Authors are thankful to the Mechanical Engineering Department of Sardar Patel College of Engineering and the Management of Toyo Engineering India ltd. for allowing us to present this work. Special thanks to Heat Transfer and Applied Technology Department, Toyo Technology Center, Mumbai, for their valuable support. REFERENCES 
[1]. Blankenship, S.A., et al., Process for Selective Hydrogenation of Acetylene in an Ethylene Purification Process. 21 January 2003. US Patent # 6,509,292 
[2]. Myung Jo Jhung, Fatigue analysis of a reactor pressure vessel for SMART, Nuclear Engineering and Technology, vol.44 no.6, august 2012. 
[3]. Heckman, David, Finite Element Analysis of Pressure Vessels, MBARI, 1998. 
[4]. James C. Sowinski, David A. Osage, Robert G. Brown, ASME Section VIII- Division 2 Example Problem Manual, The Equity Engineering Group, Inc. New York, 2010. 
[5]. ASME Boiler and Pressure Vessel Code, Section VIII, Division 2, ‘Rules for Construction of Pressure Vessels – Alternative Rules’, the American Society of Mechanical Engineers, New York, 2010 Edition.

More Related Content

What's hot

Theoritical investigations of injection pressure in a four stroke di diesel e...
Theoritical investigations of injection pressure in a four stroke di diesel e...Theoritical investigations of injection pressure in a four stroke di diesel e...
Theoritical investigations of injection pressure in a four stroke di diesel e...IAEME Publication
 
Diesel Engine CFD Simulations: Investigation of Time Step on the Combustion P...
Diesel Engine CFD Simulations: Investigation of Time Step on the Combustion P...Diesel Engine CFD Simulations: Investigation of Time Step on the Combustion P...
Diesel Engine CFD Simulations: Investigation of Time Step on the Combustion P...IRJET Journal
 
Application of Exergy and Taguchi Methodology for a Power Plant under Varying...
Application of Exergy and Taguchi Methodology for a Power Plant under Varying...Application of Exergy and Taguchi Methodology for a Power Plant under Varying...
Application of Exergy and Taguchi Methodology for a Power Plant under Varying...IJERA Editor
 
Conductivity measurement in CSTR water-base(according to temperature)
Conductivity measurement in CSTR water-base(according to temperature)Conductivity measurement in CSTR water-base(according to temperature)
Conductivity measurement in CSTR water-base(according to temperature)sarkawtn
 
2007 tinga jegtp (2)
2007 tinga jegtp (2)2007 tinga jegtp (2)
2007 tinga jegtp (2)muhammad azam
 
Transient thermal analysis of a clutch plate in Ansys
Transient thermal analysis of a clutch plate in AnsysTransient thermal analysis of a clutch plate in Ansys
Transient thermal analysis of a clutch plate in AnsysRahul Shedage
 
Heat integration of_crude_organic_distil
Heat integration of_crude_organic_distilHeat integration of_crude_organic_distil
Heat integration of_crude_organic_distilMayurkumarpatil1
 
(E book) thermodynamics fundamentals for applications - j. o'connell, j. ha...
(E book) thermodynamics   fundamentals for applications - j. o'connell, j. ha...(E book) thermodynamics   fundamentals for applications - j. o'connell, j. ha...
(E book) thermodynamics fundamentals for applications - j. o'connell, j. ha...Christianne Cristaldo
 
Modal analysis of Support bracket for air compressor system
Modal analysis of Support bracket for air compressor systemModal analysis of Support bracket for air compressor system
Modal analysis of Support bracket for air compressor systemIRJET Journal
 
forced heat convection | HEAT TRANSFER Laboratory
forced heat convection | HEAT TRANSFER Laboratoryforced heat convection | HEAT TRANSFER Laboratory
forced heat convection | HEAT TRANSFER LaboratorySaif al-din ali
 
Thermogravimetric analysis - Pharmaceutical analysis
Thermogravimetric analysis - Pharmaceutical analysisThermogravimetric analysis - Pharmaceutical analysis
Thermogravimetric analysis - Pharmaceutical analysisDrx Mathivanan Selvam
 
Pinch analysis technique to optimize heat exchanger
Pinch analysis technique to optimize heat exchangerPinch analysis technique to optimize heat exchanger
Pinch analysis technique to optimize heat exchangerK Vivek Varkey
 
Stirling engine performance prediction using schmidt analysis by considering ...
Stirling engine performance prediction using schmidt analysis by considering ...Stirling engine performance prediction using schmidt analysis by considering ...
Stirling engine performance prediction using schmidt analysis by considering ...eSAT Journals
 
Stochastic estimation methods for induction motor transient thermal monitorin...
Stochastic estimation methods for induction motor transient thermal monitorin...Stochastic estimation methods for induction motor transient thermal monitorin...
Stochastic estimation methods for induction motor transient thermal monitorin...Mellah Hacene
 

What's hot (17)

Theoritical investigations of injection pressure in a four stroke di diesel e...
Theoritical investigations of injection pressure in a four stroke di diesel e...Theoritical investigations of injection pressure in a four stroke di diesel e...
Theoritical investigations of injection pressure in a four stroke di diesel e...
 
Diesel Engine CFD Simulations: Investigation of Time Step on the Combustion P...
Diesel Engine CFD Simulations: Investigation of Time Step on the Combustion P...Diesel Engine CFD Simulations: Investigation of Time Step on the Combustion P...
Diesel Engine CFD Simulations: Investigation of Time Step on the Combustion P...
 
Application of Exergy and Taguchi Methodology for a Power Plant under Varying...
Application of Exergy and Taguchi Methodology for a Power Plant under Varying...Application of Exergy and Taguchi Methodology for a Power Plant under Varying...
Application of Exergy and Taguchi Methodology for a Power Plant under Varying...
 
Conductivity measurement in CSTR water-base(according to temperature)
Conductivity measurement in CSTR water-base(according to temperature)Conductivity measurement in CSTR water-base(according to temperature)
Conductivity measurement in CSTR water-base(according to temperature)
 
2007 tinga jegtp (2)
2007 tinga jegtp (2)2007 tinga jegtp (2)
2007 tinga jegtp (2)
 
Transient thermal analysis of a clutch plate in Ansys
Transient thermal analysis of a clutch plate in AnsysTransient thermal analysis of a clutch plate in Ansys
Transient thermal analysis of a clutch plate in Ansys
 
S04504118120
S04504118120S04504118120
S04504118120
 
Heat integration of_crude_organic_distil
Heat integration of_crude_organic_distilHeat integration of_crude_organic_distil
Heat integration of_crude_organic_distil
 
(E book) thermodynamics fundamentals for applications - j. o'connell, j. ha...
(E book) thermodynamics   fundamentals for applications - j. o'connell, j. ha...(E book) thermodynamics   fundamentals for applications - j. o'connell, j. ha...
(E book) thermodynamics fundamentals for applications - j. o'connell, j. ha...
 
Modal analysis of Support bracket for air compressor system
Modal analysis of Support bracket for air compressor systemModal analysis of Support bracket for air compressor system
Modal analysis of Support bracket for air compressor system
 
forced heat convection | HEAT TRANSFER Laboratory
forced heat convection | HEAT TRANSFER Laboratoryforced heat convection | HEAT TRANSFER Laboratory
forced heat convection | HEAT TRANSFER Laboratory
 
Reactor Design
Reactor DesignReactor Design
Reactor Design
 
Thermogravimetric analysis - Pharmaceutical analysis
Thermogravimetric analysis - Pharmaceutical analysisThermogravimetric analysis - Pharmaceutical analysis
Thermogravimetric analysis - Pharmaceutical analysis
 
Pinch analysis technique to optimize heat exchanger
Pinch analysis technique to optimize heat exchangerPinch analysis technique to optimize heat exchanger
Pinch analysis technique to optimize heat exchanger
 
Gs3311771183
Gs3311771183Gs3311771183
Gs3311771183
 
Stirling engine performance prediction using schmidt analysis by considering ...
Stirling engine performance prediction using schmidt analysis by considering ...Stirling engine performance prediction using schmidt analysis by considering ...
Stirling engine performance prediction using schmidt analysis by considering ...
 
Stochastic estimation methods for induction motor transient thermal monitorin...
Stochastic estimation methods for induction motor transient thermal monitorin...Stochastic estimation methods for induction motor transient thermal monitorin...
Stochastic estimation methods for induction motor transient thermal monitorin...
 

Viewers also liked

Road User Attitudes towards Safety Initiatives in Kuwait
Road User Attitudes towards Safety Initiatives in KuwaitRoad User Attitudes towards Safety Initiatives in Kuwait
Road User Attitudes towards Safety Initiatives in KuwaitIJMER
 
Microstructure Degradation after Prolonged Exploitation of Heatresistant Ste...
Microstructure Degradation after Prolonged Exploitation of  Heatresistant Ste...Microstructure Degradation after Prolonged Exploitation of  Heatresistant Ste...
Microstructure Degradation after Prolonged Exploitation of Heatresistant Ste...IJMER
 
Data Mining Techniques in Higher Education an Empirical Study for the Univer...
Data Mining Techniques in Higher Education an Empirical Study  for the Univer...Data Mining Techniques in Higher Education an Empirical Study  for the Univer...
Data Mining Techniques in Higher Education an Empirical Study for the Univer...IJMER
 
Heuristics for the Maximal Diversity Selection Problem
Heuristics for the Maximal Diversity Selection ProblemHeuristics for the Maximal Diversity Selection Problem
Heuristics for the Maximal Diversity Selection ProblemIJMER
 
Bf2420172020
Bf2420172020Bf2420172020
Bf2420172020IJMER
 
Accelerating Real Time Applications on Heterogeneous Platforms
Accelerating Real Time Applications on Heterogeneous PlatformsAccelerating Real Time Applications on Heterogeneous Platforms
Accelerating Real Time Applications on Heterogeneous PlatformsIJMER
 
Effect of artificial roughness on Thermal and Thermohydraulic efficiency in R...
Effect of artificial roughness on Thermal and Thermohydraulic efficiency in R...Effect of artificial roughness on Thermal and Thermohydraulic efficiency in R...
Effect of artificial roughness on Thermal and Thermohydraulic efficiency in R...IJMER
 
Implementation of Low Power and High Speed encryption Using Crypto-Hardware
Implementation of Low Power and High Speed encryption Using Crypto-HardwareImplementation of Low Power and High Speed encryption Using Crypto-Hardware
Implementation of Low Power and High Speed encryption Using Crypto-HardwareIJMER
 
Analysis of Non Conventional Cross Section of Pipe Made Of Composite Material
Analysis of Non Conventional Cross Section of Pipe Made Of  Composite MaterialAnalysis of Non Conventional Cross Section of Pipe Made Of  Composite Material
Analysis of Non Conventional Cross Section of Pipe Made Of Composite MaterialIJMER
 
Investigations of Surface Dissolution on Fatigue Crack Nucleation in Ni-22Cr-...
Investigations of Surface Dissolution on Fatigue Crack Nucleation in Ni-22Cr-...Investigations of Surface Dissolution on Fatigue Crack Nucleation in Ni-22Cr-...
Investigations of Surface Dissolution on Fatigue Crack Nucleation in Ni-22Cr-...IJMER
 
A Review on Two-Temperature Thermoelasticity
A Review on Two-Temperature ThermoelasticityA Review on Two-Temperature Thermoelasticity
A Review on Two-Temperature ThermoelasticityIJMER
 
The Contribution of Solar Energy to Reduce Electricity Shortage in the Gaza ...
The Contribution of Solar Energy to Reduce Electricity Shortage  in the Gaza ...The Contribution of Solar Energy to Reduce Electricity Shortage  in the Gaza ...
The Contribution of Solar Energy to Reduce Electricity Shortage in the Gaza ...IJMER
 
Assessing Water Demand And Supply For Srinagar City (J&K) India, Under Chang...
Assessing Water Demand And Supply For Srinagar City (J&K)  India, Under Chang...Assessing Water Demand And Supply For Srinagar City (J&K)  India, Under Chang...
Assessing Water Demand And Supply For Srinagar City (J&K) India, Under Chang...IJMER
 
A Novel High Performance H-Bridge Converter Topology for 8/6 pole SRM Drive
A Novel High Performance H-Bridge Converter Topology for 8/6  pole SRM DriveA Novel High Performance H-Bridge Converter Topology for 8/6  pole SRM Drive
A Novel High Performance H-Bridge Converter Topology for 8/6 pole SRM DriveIJMER
 
Optimizing Bunsen burner Performance Using CFD Analysis
Optimizing Bunsen burner Performance Using CFD AnalysisOptimizing Bunsen burner Performance Using CFD Analysis
Optimizing Bunsen burner Performance Using CFD AnalysisIJMER
 
Effect of Radiation on Mixed Convection Flow of a Non-Newtonian Nan fluid ove...
Effect of Radiation on Mixed Convection Flow of a Non-Newtonian Nan fluid ove...Effect of Radiation on Mixed Convection Flow of a Non-Newtonian Nan fluid ove...
Effect of Radiation on Mixed Convection Flow of a Non-Newtonian Nan fluid ove...IJMER
 
Design and Implementation of wireless heart monitor for expectant mothers in ...
Design and Implementation of wireless heart monitor for expectant mothers in ...Design and Implementation of wireless heart monitor for expectant mothers in ...
Design and Implementation of wireless heart monitor for expectant mothers in ...IJMER
 
Ac32618621
Ac32618621Ac32618621
Ac32618621IJMER
 
Secure Multi-Owner Group Signature Based Secure M-Health Records in Cloud
Secure Multi-Owner Group Signature Based Secure M-Health  Records in Cloud Secure Multi-Owner Group Signature Based Secure M-Health  Records in Cloud
Secure Multi-Owner Group Signature Based Secure M-Health Records in Cloud IJMER
 
Di2644594461
Di2644594461Di2644594461
Di2644594461IJMER
 

Viewers also liked (20)

Road User Attitudes towards Safety Initiatives in Kuwait
Road User Attitudes towards Safety Initiatives in KuwaitRoad User Attitudes towards Safety Initiatives in Kuwait
Road User Attitudes towards Safety Initiatives in Kuwait
 
Microstructure Degradation after Prolonged Exploitation of Heatresistant Ste...
Microstructure Degradation after Prolonged Exploitation of  Heatresistant Ste...Microstructure Degradation after Prolonged Exploitation of  Heatresistant Ste...
Microstructure Degradation after Prolonged Exploitation of Heatresistant Ste...
 
Data Mining Techniques in Higher Education an Empirical Study for the Univer...
Data Mining Techniques in Higher Education an Empirical Study  for the Univer...Data Mining Techniques in Higher Education an Empirical Study  for the Univer...
Data Mining Techniques in Higher Education an Empirical Study for the Univer...
 
Heuristics for the Maximal Diversity Selection Problem
Heuristics for the Maximal Diversity Selection ProblemHeuristics for the Maximal Diversity Selection Problem
Heuristics for the Maximal Diversity Selection Problem
 
Bf2420172020
Bf2420172020Bf2420172020
Bf2420172020
 
Accelerating Real Time Applications on Heterogeneous Platforms
Accelerating Real Time Applications on Heterogeneous PlatformsAccelerating Real Time Applications on Heterogeneous Platforms
Accelerating Real Time Applications on Heterogeneous Platforms
 
Effect of artificial roughness on Thermal and Thermohydraulic efficiency in R...
Effect of artificial roughness on Thermal and Thermohydraulic efficiency in R...Effect of artificial roughness on Thermal and Thermohydraulic efficiency in R...
Effect of artificial roughness on Thermal and Thermohydraulic efficiency in R...
 
Implementation of Low Power and High Speed encryption Using Crypto-Hardware
Implementation of Low Power and High Speed encryption Using Crypto-HardwareImplementation of Low Power and High Speed encryption Using Crypto-Hardware
Implementation of Low Power and High Speed encryption Using Crypto-Hardware
 
Analysis of Non Conventional Cross Section of Pipe Made Of Composite Material
Analysis of Non Conventional Cross Section of Pipe Made Of  Composite MaterialAnalysis of Non Conventional Cross Section of Pipe Made Of  Composite Material
Analysis of Non Conventional Cross Section of Pipe Made Of Composite Material
 
Investigations of Surface Dissolution on Fatigue Crack Nucleation in Ni-22Cr-...
Investigations of Surface Dissolution on Fatigue Crack Nucleation in Ni-22Cr-...Investigations of Surface Dissolution on Fatigue Crack Nucleation in Ni-22Cr-...
Investigations of Surface Dissolution on Fatigue Crack Nucleation in Ni-22Cr-...
 
A Review on Two-Temperature Thermoelasticity
A Review on Two-Temperature ThermoelasticityA Review on Two-Temperature Thermoelasticity
A Review on Two-Temperature Thermoelasticity
 
The Contribution of Solar Energy to Reduce Electricity Shortage in the Gaza ...
The Contribution of Solar Energy to Reduce Electricity Shortage  in the Gaza ...The Contribution of Solar Energy to Reduce Electricity Shortage  in the Gaza ...
The Contribution of Solar Energy to Reduce Electricity Shortage in the Gaza ...
 
Assessing Water Demand And Supply For Srinagar City (J&K) India, Under Chang...
Assessing Water Demand And Supply For Srinagar City (J&K)  India, Under Chang...Assessing Water Demand And Supply For Srinagar City (J&K)  India, Under Chang...
Assessing Water Demand And Supply For Srinagar City (J&K) India, Under Chang...
 
A Novel High Performance H-Bridge Converter Topology for 8/6 pole SRM Drive
A Novel High Performance H-Bridge Converter Topology for 8/6  pole SRM DriveA Novel High Performance H-Bridge Converter Topology for 8/6  pole SRM Drive
A Novel High Performance H-Bridge Converter Topology for 8/6 pole SRM Drive
 
Optimizing Bunsen burner Performance Using CFD Analysis
Optimizing Bunsen burner Performance Using CFD AnalysisOptimizing Bunsen burner Performance Using CFD Analysis
Optimizing Bunsen burner Performance Using CFD Analysis
 
Effect of Radiation on Mixed Convection Flow of a Non-Newtonian Nan fluid ove...
Effect of Radiation on Mixed Convection Flow of a Non-Newtonian Nan fluid ove...Effect of Radiation on Mixed Convection Flow of a Non-Newtonian Nan fluid ove...
Effect of Radiation on Mixed Convection Flow of a Non-Newtonian Nan fluid ove...
 
Design and Implementation of wireless heart monitor for expectant mothers in ...
Design and Implementation of wireless heart monitor for expectant mothers in ...Design and Implementation of wireless heart monitor for expectant mothers in ...
Design and Implementation of wireless heart monitor for expectant mothers in ...
 
Ac32618621
Ac32618621Ac32618621
Ac32618621
 
Secure Multi-Owner Group Signature Based Secure M-Health Records in Cloud
Secure Multi-Owner Group Signature Based Secure M-Health  Records in Cloud Secure Multi-Owner Group Signature Based Secure M-Health  Records in Cloud
Secure Multi-Owner Group Signature Based Secure M-Health Records in Cloud
 
Di2644594461
Di2644594461Di2644594461
Di2644594461
 

Similar to Fatigue Analysis of Acetylene converter reactor

Fatigue Analysis of Acetylene converter reactor
Fatigue Analysis of Acetylene converter reactorFatigue Analysis of Acetylene converter reactor
Fatigue Analysis of Acetylene converter reactorIJMER
 
A Finite Element Thermo-Mechanical Stress Analysis of IC Engine Piston
A Finite Element Thermo-Mechanical Stress Analysis of IC Engine PistonA Finite Element Thermo-Mechanical Stress Analysis of IC Engine Piston
A Finite Element Thermo-Mechanical Stress Analysis of IC Engine PistonIRJET Journal
 
Modeling and Stress Analysis of Gas Turbine Rotor
Modeling and Stress Analysis of Gas Turbine RotorModeling and Stress Analysis of Gas Turbine Rotor
Modeling and Stress Analysis of Gas Turbine RotorIRJET Journal
 
Validation of Design Parameters of Radiator using Computational Tool
Validation of Design Parameters of Radiator using Computational ToolValidation of Design Parameters of Radiator using Computational Tool
Validation of Design Parameters of Radiator using Computational ToolIRJET Journal
 
Dg3211151122
Dg3211151122Dg3211151122
Dg3211151122IJMER
 
Paper id 27201447
Paper id 27201447Paper id 27201447
Paper id 27201447IJRAT
 
IJCER (www.ijceronline.com) International Journal of computational Engineerin...
IJCER (www.ijceronline.com) International Journal of computational Engineerin...IJCER (www.ijceronline.com) International Journal of computational Engineerin...
IJCER (www.ijceronline.com) International Journal of computational Engineerin...ijceronline
 
Final_paper_dwight_gustard_header_12_14
Final_paper_dwight_gustard_header_12_14Final_paper_dwight_gustard_header_12_14
Final_paper_dwight_gustard_header_12_14Dwight Gustard
 
Finite Element Analysys of Axial Flow Turbine Blade
Finite Element Analysys of Axial Flow Turbine BladeFinite Element Analysys of Axial Flow Turbine Blade
Finite Element Analysys of Axial Flow Turbine BladeIJMER
 
Experimental investigate to obtain the effectiveness of regenerator using Air.
Experimental investigate to obtain the effectiveness of regenerator using Air.Experimental investigate to obtain the effectiveness of regenerator using Air.
Experimental investigate to obtain the effectiveness of regenerator using Air.IJESFT
 
IRJET- Thermal Analysis and Management for an Autonomous Underwater Vehicle
IRJET- Thermal Analysis and Management for an Autonomous Underwater VehicleIRJET- Thermal Analysis and Management for an Autonomous Underwater Vehicle
IRJET- Thermal Analysis and Management for an Autonomous Underwater VehicleIRJET Journal
 
QUENCHING CRACK ANALYSIS OF BIG SIZE FORGING BY FE ANALYSIS
QUENCHING CRACK ANALYSIS OF BIG SIZE FORGING BY FE ANALYSISQUENCHING CRACK ANALYSIS OF BIG SIZE FORGING BY FE ANALYSIS
QUENCHING CRACK ANALYSIS OF BIG SIZE FORGING BY FE ANALYSISIAEME Publication
 
ANALYSIS OF THERMAL PERFORMANCE OF SOLAR COLLECTOR WITH LONGITUDINAL FINS
ANALYSIS OF THERMAL PERFORMANCE OF SOLAR COLLECTOR WITH LONGITUDINAL FINSANALYSIS OF THERMAL PERFORMANCE OF SOLAR COLLECTOR WITH LONGITUDINAL FINS
ANALYSIS OF THERMAL PERFORMANCE OF SOLAR COLLECTOR WITH LONGITUDINAL FINSIRJET Journal
 
ESTIMATION OF CREEP PARAMETERS IN AN ISOTROPIC UNIFORM COMPOSITE CYLINDER
ESTIMATION OF CREEP PARAMETERS IN AN ISOTROPIC UNIFORM COMPOSITE CYLINDERESTIMATION OF CREEP PARAMETERS IN AN ISOTROPIC UNIFORM COMPOSITE CYLINDER
ESTIMATION OF CREEP PARAMETERS IN AN ISOTROPIC UNIFORM COMPOSITE CYLINDERijiert bestjournal
 
IRJET- Design and Thermal Analysis of Steam Turbine Blade
IRJET- Design and Thermal Analysis of Steam Turbine BladeIRJET- Design and Thermal Analysis of Steam Turbine Blade
IRJET- Design and Thermal Analysis of Steam Turbine BladeIRJET Journal
 
IRJET- Certain Investigation on Induction Motor Performance with Variable Fre...
IRJET- Certain Investigation on Induction Motor Performance with Variable Fre...IRJET- Certain Investigation on Induction Motor Performance with Variable Fre...
IRJET- Certain Investigation on Induction Motor Performance with Variable Fre...IRJET Journal
 

Similar to Fatigue Analysis of Acetylene converter reactor (20)

Fatigue Analysis of Acetylene converter reactor
Fatigue Analysis of Acetylene converter reactorFatigue Analysis of Acetylene converter reactor
Fatigue Analysis of Acetylene converter reactor
 
G012235155
G012235155G012235155
G012235155
 
Bf4301319323
Bf4301319323Bf4301319323
Bf4301319323
 
A Finite Element Thermo-Mechanical Stress Analysis of IC Engine Piston
A Finite Element Thermo-Mechanical Stress Analysis of IC Engine PistonA Finite Element Thermo-Mechanical Stress Analysis of IC Engine Piston
A Finite Element Thermo-Mechanical Stress Analysis of IC Engine Piston
 
Modeling and Stress Analysis of Gas Turbine Rotor
Modeling and Stress Analysis of Gas Turbine RotorModeling and Stress Analysis of Gas Turbine Rotor
Modeling and Stress Analysis of Gas Turbine Rotor
 
Validation of Design Parameters of Radiator using Computational Tool
Validation of Design Parameters of Radiator using Computational ToolValidation of Design Parameters of Radiator using Computational Tool
Validation of Design Parameters of Radiator using Computational Tool
 
Dg3211151122
Dg3211151122Dg3211151122
Dg3211151122
 
Paper id 27201447
Paper id 27201447Paper id 27201447
Paper id 27201447
 
IJCER (www.ijceronline.com) International Journal of computational Engineerin...
IJCER (www.ijceronline.com) International Journal of computational Engineerin...IJCER (www.ijceronline.com) International Journal of computational Engineerin...
IJCER (www.ijceronline.com) International Journal of computational Engineerin...
 
D012462732
D012462732D012462732
D012462732
 
Final_paper_dwight_gustard_header_12_14
Final_paper_dwight_gustard_header_12_14Final_paper_dwight_gustard_header_12_14
Final_paper_dwight_gustard_header_12_14
 
Finite Element Analysys of Axial Flow Turbine Blade
Finite Element Analysys of Axial Flow Turbine BladeFinite Element Analysys of Axial Flow Turbine Blade
Finite Element Analysys of Axial Flow Turbine Blade
 
Experimental investigate to obtain the effectiveness of regenerator using Air.
Experimental investigate to obtain the effectiveness of regenerator using Air.Experimental investigate to obtain the effectiveness of regenerator using Air.
Experimental investigate to obtain the effectiveness of regenerator using Air.
 
IRJET- Thermal Analysis and Management for an Autonomous Underwater Vehicle
IRJET- Thermal Analysis and Management for an Autonomous Underwater VehicleIRJET- Thermal Analysis and Management for an Autonomous Underwater Vehicle
IRJET- Thermal Analysis and Management for an Autonomous Underwater Vehicle
 
QUENCHING CRACK ANALYSIS OF BIG SIZE FORGING BY FE ANALYSIS
QUENCHING CRACK ANALYSIS OF BIG SIZE FORGING BY FE ANALYSISQUENCHING CRACK ANALYSIS OF BIG SIZE FORGING BY FE ANALYSIS
QUENCHING CRACK ANALYSIS OF BIG SIZE FORGING BY FE ANALYSIS
 
ANALYSIS OF THERMAL PERFORMANCE OF SOLAR COLLECTOR WITH LONGITUDINAL FINS
ANALYSIS OF THERMAL PERFORMANCE OF SOLAR COLLECTOR WITH LONGITUDINAL FINSANALYSIS OF THERMAL PERFORMANCE OF SOLAR COLLECTOR WITH LONGITUDINAL FINS
ANALYSIS OF THERMAL PERFORMANCE OF SOLAR COLLECTOR WITH LONGITUDINAL FINS
 
ESTIMATION OF CREEP PARAMETERS IN AN ISOTROPIC UNIFORM COMPOSITE CYLINDER
ESTIMATION OF CREEP PARAMETERS IN AN ISOTROPIC UNIFORM COMPOSITE CYLINDERESTIMATION OF CREEP PARAMETERS IN AN ISOTROPIC UNIFORM COMPOSITE CYLINDER
ESTIMATION OF CREEP PARAMETERS IN AN ISOTROPIC UNIFORM COMPOSITE CYLINDER
 
IRJET- Design and Thermal Analysis of Steam Turbine Blade
IRJET- Design and Thermal Analysis of Steam Turbine BladeIRJET- Design and Thermal Analysis of Steam Turbine Blade
IRJET- Design and Thermal Analysis of Steam Turbine Blade
 
IRJET- Certain Investigation on Induction Motor Performance with Variable Fre...
IRJET- Certain Investigation on Induction Motor Performance with Variable Fre...IRJET- Certain Investigation on Induction Motor Performance with Variable Fre...
IRJET- Certain Investigation on Induction Motor Performance with Variable Fre...
 
Et34892902
Et34892902Et34892902
Et34892902
 

More from IJMER

A Study on Translucent Concrete Product and Its Properties by Using Optical F...
A Study on Translucent Concrete Product and Its Properties by Using Optical F...A Study on Translucent Concrete Product and Its Properties by Using Optical F...
A Study on Translucent Concrete Product and Its Properties by Using Optical F...IJMER
 
Developing Cost Effective Automation for Cotton Seed Delinting
Developing Cost Effective Automation for Cotton Seed DelintingDeveloping Cost Effective Automation for Cotton Seed Delinting
Developing Cost Effective Automation for Cotton Seed DelintingIJMER
 
Study & Testing Of Bio-Composite Material Based On Munja Fibre
Study & Testing Of Bio-Composite Material Based On Munja FibreStudy & Testing Of Bio-Composite Material Based On Munja Fibre
Study & Testing Of Bio-Composite Material Based On Munja FibreIJMER
 
Hybrid Engine (Stirling Engine + IC Engine + Electric Motor)
Hybrid Engine (Stirling Engine + IC Engine + Electric Motor)Hybrid Engine (Stirling Engine + IC Engine + Electric Motor)
Hybrid Engine (Stirling Engine + IC Engine + Electric Motor)IJMER
 
Fabrication & Characterization of Bio Composite Materials Based On Sunnhemp F...
Fabrication & Characterization of Bio Composite Materials Based On Sunnhemp F...Fabrication & Characterization of Bio Composite Materials Based On Sunnhemp F...
Fabrication & Characterization of Bio Composite Materials Based On Sunnhemp F...IJMER
 
Geochemistry and Genesis of Kammatturu Iron Ores of Devagiri Formation, Sandu...
Geochemistry and Genesis of Kammatturu Iron Ores of Devagiri Formation, Sandu...Geochemistry and Genesis of Kammatturu Iron Ores of Devagiri Formation, Sandu...
Geochemistry and Genesis of Kammatturu Iron Ores of Devagiri Formation, Sandu...IJMER
 
Experimental Investigation on Characteristic Study of the Carbon Steel C45 in...
Experimental Investigation on Characteristic Study of the Carbon Steel C45 in...Experimental Investigation on Characteristic Study of the Carbon Steel C45 in...
Experimental Investigation on Characteristic Study of the Carbon Steel C45 in...IJMER
 
Non linear analysis of Robot Gun Support Structure using Equivalent Dynamic A...
Non linear analysis of Robot Gun Support Structure using Equivalent Dynamic A...Non linear analysis of Robot Gun Support Structure using Equivalent Dynamic A...
Non linear analysis of Robot Gun Support Structure using Equivalent Dynamic A...IJMER
 
Static Analysis of Go-Kart Chassis by Analytical and Solid Works Simulation
Static Analysis of Go-Kart Chassis by Analytical and Solid Works SimulationStatic Analysis of Go-Kart Chassis by Analytical and Solid Works Simulation
Static Analysis of Go-Kart Chassis by Analytical and Solid Works SimulationIJMER
 
High Speed Effortless Bicycle
High Speed Effortless BicycleHigh Speed Effortless Bicycle
High Speed Effortless BicycleIJMER
 
Integration of Struts & Spring & Hibernate for Enterprise Applications
Integration of Struts & Spring & Hibernate for Enterprise ApplicationsIntegration of Struts & Spring & Hibernate for Enterprise Applications
Integration of Struts & Spring & Hibernate for Enterprise ApplicationsIJMER
 
Microcontroller Based Automatic Sprinkler Irrigation System
Microcontroller Based Automatic Sprinkler Irrigation SystemMicrocontroller Based Automatic Sprinkler Irrigation System
Microcontroller Based Automatic Sprinkler Irrigation SystemIJMER
 
On some locally closed sets and spaces in Ideal Topological Spaces
On some locally closed sets and spaces in Ideal Topological SpacesOn some locally closed sets and spaces in Ideal Topological Spaces
On some locally closed sets and spaces in Ideal Topological SpacesIJMER
 
Intrusion Detection and Forensics based on decision tree and Association rule...
Intrusion Detection and Forensics based on decision tree and Association rule...Intrusion Detection and Forensics based on decision tree and Association rule...
Intrusion Detection and Forensics based on decision tree and Association rule...IJMER
 
Natural Language Ambiguity and its Effect on Machine Learning
Natural Language Ambiguity and its Effect on Machine LearningNatural Language Ambiguity and its Effect on Machine Learning
Natural Language Ambiguity and its Effect on Machine LearningIJMER
 
Evolvea Frameworkfor SelectingPrime Software DevelopmentProcess
Evolvea Frameworkfor SelectingPrime Software DevelopmentProcessEvolvea Frameworkfor SelectingPrime Software DevelopmentProcess
Evolvea Frameworkfor SelectingPrime Software DevelopmentProcessIJMER
 
Material Parameter and Effect of Thermal Load on Functionally Graded Cylinders
Material Parameter and Effect of Thermal Load on Functionally Graded CylindersMaterial Parameter and Effect of Thermal Load on Functionally Graded Cylinders
Material Parameter and Effect of Thermal Load on Functionally Graded CylindersIJMER
 
Studies On Energy Conservation And Audit
Studies On Energy Conservation And AuditStudies On Energy Conservation And Audit
Studies On Energy Conservation And AuditIJMER
 
An Implementation of I2C Slave Interface using Verilog HDL
An Implementation of I2C Slave Interface using Verilog HDLAn Implementation of I2C Slave Interface using Verilog HDL
An Implementation of I2C Slave Interface using Verilog HDLIJMER
 
Discrete Model of Two Predators competing for One Prey
Discrete Model of Two Predators competing for One PreyDiscrete Model of Two Predators competing for One Prey
Discrete Model of Two Predators competing for One PreyIJMER
 

More from IJMER (20)

A Study on Translucent Concrete Product and Its Properties by Using Optical F...
A Study on Translucent Concrete Product and Its Properties by Using Optical F...A Study on Translucent Concrete Product and Its Properties by Using Optical F...
A Study on Translucent Concrete Product and Its Properties by Using Optical F...
 
Developing Cost Effective Automation for Cotton Seed Delinting
Developing Cost Effective Automation for Cotton Seed DelintingDeveloping Cost Effective Automation for Cotton Seed Delinting
Developing Cost Effective Automation for Cotton Seed Delinting
 
Study & Testing Of Bio-Composite Material Based On Munja Fibre
Study & Testing Of Bio-Composite Material Based On Munja FibreStudy & Testing Of Bio-Composite Material Based On Munja Fibre
Study & Testing Of Bio-Composite Material Based On Munja Fibre
 
Hybrid Engine (Stirling Engine + IC Engine + Electric Motor)
Hybrid Engine (Stirling Engine + IC Engine + Electric Motor)Hybrid Engine (Stirling Engine + IC Engine + Electric Motor)
Hybrid Engine (Stirling Engine + IC Engine + Electric Motor)
 
Fabrication & Characterization of Bio Composite Materials Based On Sunnhemp F...
Fabrication & Characterization of Bio Composite Materials Based On Sunnhemp F...Fabrication & Characterization of Bio Composite Materials Based On Sunnhemp F...
Fabrication & Characterization of Bio Composite Materials Based On Sunnhemp F...
 
Geochemistry and Genesis of Kammatturu Iron Ores of Devagiri Formation, Sandu...
Geochemistry and Genesis of Kammatturu Iron Ores of Devagiri Formation, Sandu...Geochemistry and Genesis of Kammatturu Iron Ores of Devagiri Formation, Sandu...
Geochemistry and Genesis of Kammatturu Iron Ores of Devagiri Formation, Sandu...
 
Experimental Investigation on Characteristic Study of the Carbon Steel C45 in...
Experimental Investigation on Characteristic Study of the Carbon Steel C45 in...Experimental Investigation on Characteristic Study of the Carbon Steel C45 in...
Experimental Investigation on Characteristic Study of the Carbon Steel C45 in...
 
Non linear analysis of Robot Gun Support Structure using Equivalent Dynamic A...
Non linear analysis of Robot Gun Support Structure using Equivalent Dynamic A...Non linear analysis of Robot Gun Support Structure using Equivalent Dynamic A...
Non linear analysis of Robot Gun Support Structure using Equivalent Dynamic A...
 
Static Analysis of Go-Kart Chassis by Analytical and Solid Works Simulation
Static Analysis of Go-Kart Chassis by Analytical and Solid Works SimulationStatic Analysis of Go-Kart Chassis by Analytical and Solid Works Simulation
Static Analysis of Go-Kart Chassis by Analytical and Solid Works Simulation
 
High Speed Effortless Bicycle
High Speed Effortless BicycleHigh Speed Effortless Bicycle
High Speed Effortless Bicycle
 
Integration of Struts & Spring & Hibernate for Enterprise Applications
Integration of Struts & Spring & Hibernate for Enterprise ApplicationsIntegration of Struts & Spring & Hibernate for Enterprise Applications
Integration of Struts & Spring & Hibernate for Enterprise Applications
 
Microcontroller Based Automatic Sprinkler Irrigation System
Microcontroller Based Automatic Sprinkler Irrigation SystemMicrocontroller Based Automatic Sprinkler Irrigation System
Microcontroller Based Automatic Sprinkler Irrigation System
 
On some locally closed sets and spaces in Ideal Topological Spaces
On some locally closed sets and spaces in Ideal Topological SpacesOn some locally closed sets and spaces in Ideal Topological Spaces
On some locally closed sets and spaces in Ideal Topological Spaces
 
Intrusion Detection and Forensics based on decision tree and Association rule...
Intrusion Detection and Forensics based on decision tree and Association rule...Intrusion Detection and Forensics based on decision tree and Association rule...
Intrusion Detection and Forensics based on decision tree and Association rule...
 
Natural Language Ambiguity and its Effect on Machine Learning
Natural Language Ambiguity and its Effect on Machine LearningNatural Language Ambiguity and its Effect on Machine Learning
Natural Language Ambiguity and its Effect on Machine Learning
 
Evolvea Frameworkfor SelectingPrime Software DevelopmentProcess
Evolvea Frameworkfor SelectingPrime Software DevelopmentProcessEvolvea Frameworkfor SelectingPrime Software DevelopmentProcess
Evolvea Frameworkfor SelectingPrime Software DevelopmentProcess
 
Material Parameter and Effect of Thermal Load on Functionally Graded Cylinders
Material Parameter and Effect of Thermal Load on Functionally Graded CylindersMaterial Parameter and Effect of Thermal Load on Functionally Graded Cylinders
Material Parameter and Effect of Thermal Load on Functionally Graded Cylinders
 
Studies On Energy Conservation And Audit
Studies On Energy Conservation And AuditStudies On Energy Conservation And Audit
Studies On Energy Conservation And Audit
 
An Implementation of I2C Slave Interface using Verilog HDL
An Implementation of I2C Slave Interface using Verilog HDLAn Implementation of I2C Slave Interface using Verilog HDL
An Implementation of I2C Slave Interface using Verilog HDL
 
Discrete Model of Two Predators competing for One Prey
Discrete Model of Two Predators competing for One PreyDiscrete Model of Two Predators competing for One Prey
Discrete Model of Two Predators competing for One Prey
 

Recently uploaded

EPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxEPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxJoseeMusabyimana
 
solar wireless electric vechicle charging system
solar wireless electric vechicle charging systemsolar wireless electric vechicle charging system
solar wireless electric vechicle charging systemgokuldongala
 
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxSUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxNaveenVerma126
 
me3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Ame3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Akarthi keyan
 
nvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxnvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxjasonsedano2
 
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...Amil baba
 
Landsman converter for power factor improvement
Landsman converter for power factor improvementLandsman converter for power factor improvement
Landsman converter for power factor improvementVijayMuni2
 
Transforming Process Safety Management: Challenges, Benefits, and Transition ...
Transforming Process Safety Management: Challenges, Benefits, and Transition ...Transforming Process Safety Management: Challenges, Benefits, and Transition ...
Transforming Process Safety Management: Challenges, Benefits, and Transition ...soginsider
 
Multicomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfMulticomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfGiovanaGhasary1
 
Guardians and Glitches: Navigating the Duality of Gen AI in AppSec
Guardians and Glitches: Navigating the Duality of Gen AI in AppSecGuardians and Glitches: Navigating the Duality of Gen AI in AppSec
Guardians and Glitches: Navigating the Duality of Gen AI in AppSecTrupti Shiralkar, CISSP
 
A Seminar on Electric Vehicle Software Simulation
A Seminar on Electric Vehicle Software SimulationA Seminar on Electric Vehicle Software Simulation
A Seminar on Electric Vehicle Software SimulationMohsinKhanA
 
Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptxSaiGouthamSunkara
 
Nodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxNodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxwendy cai
 
Modelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsModelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsYusuf Yıldız
 
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratory
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratoryدليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratory
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide LaboratoryBahzad5
 
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxUNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxrealme6igamerr
 
Power System electrical and electronics .pptx
Power System electrical and electronics .pptxPower System electrical and electronics .pptx
Power System electrical and electronics .pptxMUKULKUMAR210
 
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxVertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxLMW Machine Tool Division
 
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchrohitcse52
 
Graphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesGraphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesDIPIKA83
 

Recently uploaded (20)

EPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxEPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptx
 
solar wireless electric vechicle charging system
solar wireless electric vechicle charging systemsolar wireless electric vechicle charging system
solar wireless electric vechicle charging system
 
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxSUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
 
me3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Ame3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part A
 
nvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxnvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptx
 
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...
 
Landsman converter for power factor improvement
Landsman converter for power factor improvementLandsman converter for power factor improvement
Landsman converter for power factor improvement
 
Transforming Process Safety Management: Challenges, Benefits, and Transition ...
Transforming Process Safety Management: Challenges, Benefits, and Transition ...Transforming Process Safety Management: Challenges, Benefits, and Transition ...
Transforming Process Safety Management: Challenges, Benefits, and Transition ...
 
Multicomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfMulticomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdf
 
Guardians and Glitches: Navigating the Duality of Gen AI in AppSec
Guardians and Glitches: Navigating the Duality of Gen AI in AppSecGuardians and Glitches: Navigating the Duality of Gen AI in AppSec
Guardians and Glitches: Navigating the Duality of Gen AI in AppSec
 
A Seminar on Electric Vehicle Software Simulation
A Seminar on Electric Vehicle Software SimulationA Seminar on Electric Vehicle Software Simulation
A Seminar on Electric Vehicle Software Simulation
 
Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptx
 
Nodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxNodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptx
 
Modelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsModelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovations
 
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratory
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratoryدليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratory
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratory
 
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxUNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
 
Power System electrical and electronics .pptx
Power System electrical and electronics .pptxPower System electrical and electronics .pptx
Power System electrical and electronics .pptx
 
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxVertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
 
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
 
Graphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesGraphics Primitives and CG Display Devices
Graphics Primitives and CG Display Devices
 

Fatigue Analysis of Acetylene converter reactor

  • 1. International OPEN ACCESS Journal Of Modern Engineering Research (IJMER) | IJMER | ISSN: 2249–6645 | www.ijmer.com | Vol. 4 | Iss.10| Oct. 2014 | 34| Fatigue Analysis of Acetylene converter reactor K. J. Bhesaniya1, D. N. Jadhav2, R. K. Jain3 1&2 Department of Mechanical Engineering, Sardar Patel College of Engineering, Mumbai 3HTAT Department, Toyo Technology Center, Mumbai I. Introduction An acetylene converter is a Catalytic reactor. The behavior of the catalyst in reactor is with high- pressure and temperature petrochemical processes. Acetylene is a byproduct of modern ethylene production processes, and it acts as a poison to the catalysts used for making polyethylene out of the ethylene product. Due to the above reasons, polymer-grade ethylene product should contain no more than 5 ppm of acetylene. [1] There are many transients considered in the design stage. Their effect on the structural integrity should be addressed in the licensing documents in the form of a design report. Therefore in this study, an analysis procedure for fatigue analysis is suggested that includes thermal and structural analysis. For the transient thermal analysis, the thermal transient data are simplified to prepare a straightforward input deck. The most severe instances are found considering the total stress intensity range and the stress levels at those times are obtained along with the applied pressure [2]. These values are then used in a fatigue analysis to determine the final cumulative usage factor. Example analyses are performed for the acetylene converter reactor for arbitrary transients, and two acceptance criteria, the peak stress intensity and cumulative usage factor, are investigated. II. Analysis 2.1 Finite element model The acetylene converter reactor is considered in this study. It is made of ASME SA-516 Grade60 Class1 material. Flanges are not included in the model in this study, which should be investigated separately in detail. Two finite element models are developed for a transient thermal analysis and a structural analysis using software. For the thermal analysis, 2-D thermal solid elements are used in the reactor vessel. This element can be used as an axisymmetric element with 2-D thermal conduction capability. It has eight nodes with a single degree of freedom, the temperature, at each node [3]. Six elements exist in the radial direction of the shell to represent the profile of the result in a manner suitable for generating sufficient information in the ensuing analysis. For the structural analysis, 2-D structural solid elements are used, as shown in Figure 1. These types of elements are used for the 2-D modeling of solid structures. They can be used as axisymmetric elements [3]. An element in this case is defined as having eight nodes with two degrees of freedom for each node; these are the translations in the nodal x and y directions. Symmetric boundary conditions are imposed at the center nodes of the upper and lower heads. In addition, one node is fixed in all directions so as not to generate rigid body motion. Abstract: The structural integrity of mechanical components during several transients should be assured in the design stage. This requires a fatigue analysis including thermal and structural analysis. As an example, this study performs a fatigue analysis of the acetylene converter reactor during arbitrary transients. Using heat transfer coefficients determined based on the operating environments, a transient thermal analysis is performed and the results are applied to a finite element model along with the pressure to calculate the stresses. The total stress intensity range and cumulative fatigue usage factor are investigated to determine the adequacy of the design. Keywords: Fatigue damage factor, FEM, Reactor Pressure Vessel, Smooth Bar Method.
  • 2. Fatigue Analysis of Acetylene converter reactor | IJMER | ISSN: 2249–6645 | www.ijmer.com | Vol. 4 | Iss.10| Oct. 2014 | 35| Fig. 1 Axisymmetric model of a reactor pressure vessel 2.2 Loading Cycle Several transients are considered in this study, as start-up and regeneration. These are arbitrarily chosen for the fatigue analysis. The typical pressure and temperature history for the plant regeneration processes is shown in Figures 2. Fig. 2 Pressure and Temperature Histories of the Regeneration Process 2.3 Thermal analysis To obtain the temperature distribution in the shell and head of the vessel and skirt, transient thermal analyses are performed for each transient defined previously. In this analysis, temperature versus time graph of reactor is given as temperature loading. As heat is transferred from solid structure into insulation and that heat is transferred from insulation to atmosphere by convection. Near a vessel skirt juncture, heat is transferred by radiation. Temperature Distribution near Skirt to Head Juncture is shown in figure 2. Fig. 2 Temperature Distribution near Skirt to Head Juncture
  • 3. Fatigue Analysis of Acetylene converter reactor | IJMER | ISSN: 2249–6645 | www.ijmer.com | Vol. 4 | Iss.10| Oct. 2014 | 36| 2.4 Stress analysis In this analysis, for this model Pressure versus time graph is applied as pressure loading and temperatures from thermal analysis browsed for every sub –step. Model is designed in axisymmetric. Stress results are shown in figure 3. for regeneration cycle. Fig. 3 Stress versus time plot III. Fatigue Assessment Cycle counting is used to summarize (an often lengthy process) irregular load-versus-time histories by providing the number of times cycles of various sizes that occur. The smooth bar method is used in this study. The total stress at each peak stress locations was read directly from the finite element output and is taken as the equivalent stress range ΔSp,kfor the component [4]. 3.1 The alternating stress The effective alternating equivalent stress amplitude (Sa) is calculated for the cycle using the equivalent stress range ΔSp,kfor the component. The Poisson correction factor, Kv,kneed not be used if the fatigue penalty factor, Ke,k, is used for the entire stress range (including ΔSLT,k)[5]. Hence the alternating stress is given by following equation 푆푎= 퐾푓∗퐾푒,푘∗Δ푆푝,푘 2 3.2 The permissible cycle To calculate the permissible number of cycles, Nk, from the alternating equivalent stress computed, using the fatigue curves provided in Annex 3.F.[5] The allowable number of cycles for each component is calculated using Equation (3.F.1)[5] 푁=(10)푋 Where, 푋= 퐶1+퐶3푌+퐶5푌2+퐶7푌3+퐶9푌4+퐶11푌51+퐶2푌+퐶4푌2+퐶6푌3+퐶8푌4+퐶10푌5 Y= 푆푎 퐶푢푠 퐸퐹퐶 퐸푇 ET= the material modulus of elasticity at the cycle temperature EFC= the modulus of elasticity used to establish the design fatigue curve CUS = 6.894757 for units of stress in MPa. (Conversion factor) For the vessel materials of construction, the coefficients Ci and the modulusEFCare taken from the Smooth bar fatigue curve for carbon steel σuts≤ 552 MPA are listed in table 3.F.1.[5] Table 1 Allowable number of cycles, Nk 3.3 Calculation the fatigue damage factor Component Location ET(MPa) EFC(MPa) Salt,k(MPa) X Nk(cycle) Skirt Skirt ring at inside corner 190E03 195E03 106.2 5.414 2.59E05
  • 4. Fatigue Analysis of Acetylene converter reactor | IJMER | ISSN: 2249–6645 | www.ijmer.com | Vol. 4 | Iss.10| Oct. 2014 | 37| The actual number of repetitions of the cycle is set to the cyclic life requirement provided in the User’s Design Specification, 20000 cycles. The fatigue damage for the is then calculated by 퐷푓,푘= 푛푘 푁푘 ≤1 This result in calculated fatigue damage for limiting region (Skirt ring at inside corner) is 0.077. The fatigue damage is well below the allowable level of 1.0, satisfying the requirement. IV. Conclusion For a transient thermal analysis, the thermal transient data are simplified to prepare a simple input deck. The most severe instances are found considering the satisfaction of total stress intensity range, and the stress levels at those times are obtained along with the applied pressure. These values are then used in the fatigue analysis to determine the final fatigue damage factor. Example analysis of the acetylene converter reactor is performed for postulated arbitrary transients and generating the following conclusions:  The fatigue damage factor is well below the allowable level of 1.0  The major contribution to the fatigue usage factor is temperature variations during transients.  No effect of pressure loading on the fatigue factor arises inside of the vessel.  Acknowledgment Authors are thankful to the Mechanical Engineering Department of Sardar Patel College of Engineering and the Management of Toyo Engineering India ltd. for allowing us to present this work. Special thanks to Heat Transfer and Applied Technology Department, Toyo Technology Center, Mumbai, for their valuable support. REFERENCES [1]. Blankenship, S.A., et al., Process for Selective Hydrogenation of Acetylene in an Ethylene Purification Process. 21 January 2003. US Patent # 6,509,292 [2]. Myung Jo Jhung, Fatigue analysis of a reactor pressure vessel for SMART, Nuclear Engineering and Technology, vol.44 no.6, august 2012. [3]. Heckman, David, Finite Element Analysis of Pressure Vessels, MBARI, 1998. [4]. James C. Sowinski, David A. Osage, Robert G. Brown, ASME Section VIII- Division 2 Example Problem Manual, The Equity Engineering Group, Inc. New York, 2010. [5]. ASME Boiler and Pressure Vessel Code, Section VIII, Division 2, ‘Rules for Construction of Pressure Vessels – Alternative Rules’, the American Society of Mechanical Engineers, New York, 2010 Edition.