• Share
  • Email
  • Embed
  • Like
  • Save
  • Private Content
MUNDOS VIRTUALES 2012
 

MUNDOS VIRTUALES 2012

on

  • 997 views

 

Statistics

Views

Total Views
997
Views on SlideShare
997
Embed Views
0

Actions

Likes
0
Downloads
7
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

    MUNDOS VIRTUALES 2012 MUNDOS VIRTUALES 2012 Document Transcript

    • TechnicalTraining & Education Equipment
    • TechnicalTraining & Education Equipment Contents * Electronic Pag 1 * Systems Pag 18 * Electric Pag 19 * Telecomunications Pag 23 * Mechatronics Pag 33 * Bioengineering Pag 35 * Mechanical Pag 36 Secondary Undergraduate Graduate
    • *i3net ElectronicKL - 100 NIVEL S - P KL - 200 NIVEL S - P Linear Circuits Lab (2) - Electronic Circuits Lab The KL-200 Linear Circuits Lab(2) - Electronic Circuits Lab is a comprehensive and self-contained system suitable for anyone engaged in electronic circuit experiments. All the necessary equipment for electronic circuit experiments such as power supply, function generator, analog and digital meters are installed on the main unit. The 17 modules cover a wide range of essential topics for electronics circuit. It is a time and cost saver for both students and engineers interested in developing and testing prototype circuits. Features ● ● With universal breadboard for circuit designing and Ideal for electronic circuit experiments and designing exercises prototypes ● ● All modules equipped with an 8-bit DIP switch for fault Integrated experimental circuit and trainer with comprehensive experiment curriculum simulations ● Supply complete training device easy and effective for Individual keeping case for all modules easy carrying and experiments storage facilitiesKL - 210 NIVEL S - PBasic Electricity Circuit Lab Features ● Ideal for students to learn the design of electrical, electronics and digital logic circuits. ● T learn efficiently, power supply, function generator and o measurement unit are all included. ● All supply units are secured with overload protection. ● With one main unit, user can choose the needed modules for different learning topics.
    • *i3net Electronic KL - 300 NIVEL S - P Features Digital Logic Lab● Suitable for combination logic, sequential logic and microprocessor circuits design and experiments● Ideal tool for learning the basics of digital logic circuits● Comprehensive power, signal supply and testing devices for convenient experiments● Experiments are expandible and flexible with universal breadboard● Capable of processing TTL, CMOS, NMOS, PMOS and ECL circuits● All supply units are equipped with overload protection for safety purpose● All modules equipped with 8-bit DIP switch for fault simulations● Individual keeping cases for all modules for easy storing and carrying● All signal generators have independent and simultaneous TTL and CMOS level output terminal.KL - 310 NIVEL PAdvanced Digital Logic Lab The KL-310Advanced Digital Logic Lab is designed for students and engineers interested in developing and testing prototype circuits. The lab includes combinational logic, sequential logic, memory, ADC/DAC..etc. experiment circuits and offers several application circuits (PWM, timer, motor control..etc.). All the necessary equipment for digital logic experiments such as power supply, clock generator, switches, displays are built-in on the main unit. The lab has 10 experiment modules and one CPLD & breadboard experiment module. Features ● The whole trainer is fully designed by FPGA/CPLD logic circuit. Buffer circuits have enhanced protection for each module which ● Includes various types of ADC & DAC circuits to learn different is powered by main unit through power socket, avoiding wrong interfacing circuits between analog and digital signal. input power source during the experiment. ● Built-in 8-channel multiplexer in main unit to measure multiple ● Covers different levels of logic circuit experiments, ranging digital signals in real time. from combinational logic, sequential logic as well as the logic Multiple operation modes from 4-digit 7-segment display (a) circuit interfacing with microcontroller and practical application scanning display mode, (b) individual digit display mode, (c) circuit for daily use. frequency counter mode for measurement of internal and ● Students can implement their own circuit from universal CPLD external clock. & breadboard experiment module, making it possible to ● Individual keep case for all modules for easy storing and carrying prototype most analog and digital circuits in the system.
    • *i3net ElectronicKL - 500 NIVEL P-PTIndustrial Electronic Trainer To train technicians to be able to install and maintain electronic equipment becomes important nowadays. A good technician should follow state-of-the-art technology and rapid products innovation. Our system is intended for the technical education. In fact, KL-500 is adapted to theoratical and pratical courses for studying power electronics and industrial electronics. Features ● Comprehensive study including the theoretical study and practical exercises ● Use of industrial-type components, devices and circuits KL - 600 NIVEL P The KL-600 Microcomputer Sensing Control Microcomputer Sensing Control System System is a comprehensive sensor/transducer control training system that incorporates industrial-grade components with various control circuits and load units. Its modular and closed- loop control circuits allow implementation of open-ended, individual control loops used in industrial applications. The KL-600 uses only industrial-standard sensors / transducers (0~10V, 4~20mA) and is equipped with USB interfaces for computer interface. Features ● Industrial-standard sensors and transducers Open-ended design, ideal for expansion ● With USB interface ports ● Offer a sensing data acquisition softwareKL - 620 NIVEL PMicrocomputer Sensing Control Equipment The KL-620 Microcomputer Sensing Control equipment is a comprehensive sensor / transducer control training system. Its modular and closed-loop control circuits allow implementation of open-ended, individual control loops used in industrial applications. The KL-620 uses only industrial-standard sensors/transducers(0~10V, 4~20mA) and is equipped with USB for computer interface. Features ● Industrial-standard sensors and transducers ● Open-ended design, ideal for expansion ● With USB interface ● Offer a sensing data acquisition software
    • *i3net Electronic ACS - 1000 NIVEL P Analog Control System ACS-1000, covered with many technical disciplines, explicates the central significance of Analog Control System. This applies particularly in mechanical and electrical engineering, in production and process technology. It is indispensable to plant and system technology. In the automation field, important optimization tasks would be quite impossible to be accomplished without closed-loop control technology. In line with its increasing importance, closed-loop control has become an essential subject in professional training and further education for many professions. In the newly formulated training curriculum, this technology plays an important role covering a number of subjects in syllabuses for training in industry and the crafts. Features ● Modularized ACS-1000 is flexible enough to cater to ● Control engineering is an exciting discipline. It offers the the needs of all level learners to make related experiments. quickest and best way to learn system control to improve production processes. Electronic analog control and ● The whole control modules help students to understand simulation have become the cornerstone of technological control theory and application of hands-on motor control advancement. through our comprehensive and step-by-step teaching K&H provides ACS-1000 for students to observe the testing curriculums. result of Proportional-Integral-Derivative (PID) controllers ● We also provide PC based digital storage oscilloscope as well as phase-lag and phase-lead controllers. module as interface to facilitate data storage and analysis from computer. (Option)KL - 900 A NIVEL PBasic Communication System KL-900A offers experiments for fundamental technical concepts in telecommunication. It enables students to acquire a clear experimental view and further, they will be familiar with the operative aspects of the work in the telecommunication laboratory. Features ● The trainer includes modules with experimental circuits. It offers the beginner complete courses of basic analog and digital communication. ● KL-900A is equipped with power supply and signal unit. Students only have to adopt the oscilloscope to complete various experiments independently. ● System modularity maximizes flexibility and variety for experimentation, and allows possibility for expansion and customization.
    • *i3net ElectronicKL - 900 B NIVEL PAnalog Communication System 144MHz VHF FM Transceiver Trainer KL-900B Analog Communication System discloses the secret of the walky-talky based on the 144MHz VHF band. It breaks the circuit of walky-talky into 4 blocks : receiver block, transmitter block, audio amplifier block and microphone amplifier block. Block diagrams are printed clearly on the panel of the module, giving students a comprehensive view of how walky-talky works. Features ● 144MHz VHF FM transceiver trainer ● 2 modules form basis for over 9 fully documented experiments ● Includes experiment and instructors manual KL - 900 C NIVEL P AM/FM Tr ansmitter & Receiver System AM Transmitter & Receiver FM Transmitter & Receiver Features● System consists of AM transmitter and receiver and FM transmitter and receiver● Modules have switched fault DIP switches for fault-finding experiments● Includes full documentation The KL-900C AM/FM Transmitter and Receiver System is a comprehensive and self-contained system suitable for demonstrating AM and FM transmission. The system contains four separate modules - the AM transmitter, AM receiver modules, FM transmitter and FM receiver modules.KL - 900 D NIVEL P -PTFiber-Optic Tr ansmission Tr aining System With four different data transmission ways (self module transmission, module-to-module transmission, PC-to-module transmission and module-to - PC transmissions) and various different modulation / demodulation methods (CVSD, FSK, etc ) Introduced in the training system, users can obtain a very clear view of how fiber-optic transmission works. Features ● With four different data transmission ways (self module transmission, module-to-module transmission, PC-to-module transmission, and module-to-PC transmission). Fiber-Optic communication is one of the most ● The experiment KL-900D will show you how easy it is to popular technologies in the modern days due to its make productive use of fiber optic materials. high transfer speed and large capacity. KL-900D ● The equipment that you assemble will transmit voice from one uses fiber optic as a transmission media for the point to another, using light traveling through an optical fiber. whole experiment.
    • *i3net Electronic 8051 is the original chip of MTS-51 family devices MTS -- 51 NIVEL P MTS 51 NIVEL P which is originated from Intel. This chip is a stand-alone, 8051 Microcomputer Trainer powerful 8-bit single-chip microcomputer and is commonly used for real-time control applications. MTS-51 microcomputer trainer is designed for learning 8051 core architecture and instructions. Features ● Through series port interface, the ISP and IAP functions of P89V51RD2BN control chip enable the program codes to be downloaded to flash memory and show the results at real time. ● Reserving external connection pins for advanced experiments ● Plenty of experiments to do various basic I/O control applications ● The single chip of the trainer can be replaced by INTELs 8751 / 52 series (without ISP function) and ATMEL’s ● With various common I/O components and experiments, AT89C51 / 52 series (with ISP function) MTS-51 turned learners into experienced users of basic control application with 8051 microcontroller.MTS - 80 A NIVEL PZ-80 Microcomputer Trainer MTS-80A helps students to understand the architecture and programming of Z-80 computer. The system contains five main parts: (1) a Z-80 CPU (2) system and user memory (3) world standard chip sets (4) input and output devices, and (5) External Interface. Students edit and assemble program codes from PC and observe instant results after they download and execute programs from system memory. Debug functions are also available via PC or system keypad interface. ● Programming codes are downloaded / debugged / executed via PC or Trainer keyboard Features ● All chip sets are protected by an acrylic cover on the top ● Power supply and all experimental peripherals are built in a of trainer panel. single trainer to carry out Z-80 experiments, no additional ● All chip names are clearly printed in corresponding position equipment is required. on acrylic panel ● Demo programs are permanently stored in system ROM to ● External Interface allows user to create user-defined circuits. offer quick system test and functional demonstration. MTS - 86 C NIVEL P 8086 Microcomputer Trainer MTS-86C helps students to understand the architecture and programming of 8086 computer. The system contains five main parts : (1) an 8086 CPU (2) system and user memory (3) world standard chip sets (4) input and output devices, and (5) External interface. Students edit and assemble program codes from PC and observe instant results after they download and execute programs from system memory. Debug functions are also available via PC or system keypad interface.
    • *i3net ElectronicKR -101 NIVEL PTRefrigerator Model Training System KR-101 completely places all essential refrigerator components on the front panel of the system. Only when students understand the operation principal of the refrigerator can they connect the components correctly. Under such circumstance, KR-101 becomes a real refrigerator and students can use the meters located on the front panel to record the status of the components during its operation. KR-101 also clearly demonstrates four major elements such as Condenser, Compressor, Evaporator, and Capillary Tube located at the rear side of the system. Students can touch and feel the elements as well as draw the Mollier diagram to record the characteristic of the refrigerant during different phase of the refrigeration cycle. For the sake of quick demonstration, KR-101 provides a Teacher Board for teacher to insert it into the side slot. When teacher board is inserted, the whole system starts running even the wire connections on the front panel are incorrect. Features ● The major elements of the refrigeration system including condenser, ● The system includes high pressure gauge, low pressure gauge, compressor, evaporator, capillary tube, filter and drier are open for AC Voltmeter, AC Ammeter and temperature meter which are the purpose of best observation. located at the front panel allowing students to record the status ● The system contains various electronic components and their of the components during its operation. symbols located at the front panel allowing students to use ● The refrigerant path for high pressure tube is painted in red and 4mm safety plug cables to construct the control circuit of the low pressure tube in blue. refrigeration system. ● Teacher board allows teacher to quick demonstrate the operation ● The control circuit of the refrigeration system are made of following of the refrigeration system needless constructing the control electronic devices: system fuse, fan indicator, evaporator door circuits. switch...etc. KR - 115 NIVEL PT Refrigeration Cycle and Heat Pump System KR-115 is designed to learn the theory of Heat Transfer in refrigeration engineering. With proper setup, KR-115 can be emulated as a Refrigeration or Heat Pump system. All system components are mounted on the front panel so students can directly observe, touch the components, and hear the noise produced by the components while it is running under either Refrigeration or Heat Pump cycle. KR-115 offers three expansion devices available for the refrigerant to pass through; they are pressure expansion valve, capillary tube, and thermal expansion valve. Students can use the control panel to switch the preferred expanding path from three expansion devices and compare the corresponding performance under Refrigeration or Heat Pump cycle. The state of the refrigerant can be clearly observed through 6 sight glasses at different phases of the Refrigeration / Heat Pump cycle. 5 hand valves are used to manually control the flowing direction of the refrigerant circulating through the system. Student must use the valves to lead the refrigerant to the appropriate flowing direction so that the system can operate in corresponding cooling / heating condition. If students mislead the refrigerant to wrong flowing direction, the pressure protection switches will detect the conflict and halt the compressor to prevent the system from being damaged. ● Provide three types of expansion devices, including capillary Features tube, pressure expansion valve, and thermal expansion valve ● All system components, including condenser, compressor, evaporator, for refrigerant to pass through. capillary tube, filter, refrigerant receiver, accumulator, hand valves, ● Provide 6 sight glasses to observe the refrigerant status before pressure gauges, expansion devices, are mounted on the front and after passing evaporator, condenser, expansion devices, panel for direct operation and observation and compressor. ● Use control panel to select heat pump cycle (cooling or heating), ● Provide 5 hand valves to control the flowing direction of the refrigerant. fan speed of evaporator and condenser, and expanding path of ● Provide high and low pressure protection switches to automatically the refrigerant halt the compressor when detecting wrong refrigerant flowing path. ● Use control box to monitor the system voltage and current as ● The refrigerant path for high pressure tube is painted in red and well as heat pump status. low pressure tube in blue.
    • *i3net Electronic KR - 201 NIVEL PT Air Conditioner Training System The main composition of KR-201 is a real window type air conditioner just like in our daily life. What makes it special is that students are able to observe the operation of the internal components and the state of the refrigerant while the air conditioner is running. From the front panel, there are four refrigerant sight glasses, which provide students an excellent opportunity to observe the state of the refrigerant before and after passing through four major elements Compressor, Condenser, Capillary Tube, and Evaporator. Students can also use built-in gauges/meters to draw the Mollier diagram and so as to understand the performance of this air conditioner. Combining the observation of refrigerant state during different phase of the refrigeration cycle, KR-201 helps students to understand the operating principle of the window type Features ● The operation of the system is based on a real window-type air ● Provide voltmeter and ammeter at front panel to monitor conditioner behind the front panel. instant system power. The metal case of the air conditioner is replaced by plastic acrylic ● Provide high and low pressure gauge at front panel to monitor so that students can observe its internal structure even when it instant inlet/outlet pressure of the compressor. is operating. ● Provide a 6-channel temperature meter located at front panel ● Major components including condenser, evaporator and capillary to instantly display different refrigerant temperature before tube of the air conditioner are extended to the front panel and and after passing through compressor, condenser, evaporator, covered by plastic acrylic to fit experimental needs. and capillary tube. ● Provide 4 sight glasses at front panel to observe the refrigerant ● Provide a temperature meter located at the front panel to display status before and after passing through compressor, condenser, the temperature from a moveable sensor. evaporator, and capillary tube. ● AMollier Chart is clearly printed on the front panel for quick reference.KR - 212 NIVEL PTSingle-Split Type Cooling / Heating Due to its lower level of indoor noise and high flexibility of installation, SplitAir Conditioner Training System Type Air Conditioner becomes more and more popular in nowadays. KR-212 itself is a real split type air conditioner especially designed for teaching purpose. Both indoor and outdoor units are installed on the demonstration stand so students can learn the operating principle of both units at the same time. User can easily observe and record the behavior of both units while running under different setup by remote controller such as temperature, fan speed, or operating mode (cooler, heater, dehumidifier...) Four valves are intentionally designed to be located at the front panel of the demonstration stand to allow students handily install the connection pipes (gas pipe and liquid pipe) between indoor and outdoor units. This helps students further to realize how Indoor and Outdoor Units cooperate with each other as well as to understand the refrigerant path during its circulation cycle. Students can use the built-in gauges/meters and additional measurement tools to record the experimental data and further to draw the Psychrometric Chat and Mollier Diagram so as to understand the performance of this air Features ● The operation of the system is based on a real split-type air conditioner including one indoor unit and one outdoor unit installed on a same stand. ● Provide high and low pressure gauge at the front panel to The system can be operated as either cooler or heater modes. monitor instant inlet/outlet pressure of the compressor. ● Provide 4 fixing valves at the front panel to enable students ● Both indoor and outdoor units are powered by an isolated handily install the connection pipes (gas pipe and liquid pipe) power supply with overload protection. between indoor and outdoor units. ● The circuit diagram of the system and a Mollier Chart are ● Provide voltmeter and ammeter at the front panel to monitor clearly printed on the front panel for quick reference. instant system power. ● Both indoor unit and outdoor unit are installed on an aluminum stand with wheels for easy movement.
    • *i3net ElectronicGFC -1300 NIVEL PTDMFC Lab Nowadays the fuel cell technology is making a great progress in developments and related applications so that various fuel cell based apparatuses and applications are launched out on the market increasingly. The fuel cell has following advantages : high efficiency, eco friendly, low noise and vibration, and portability. GFC-1300 is an apparatus that directly produces electricity via chemical reaction in methanol solution. The operating parameters of GFC-1300 are adjustable to allow trainees to learn the operating concept of DMFC via hands on practices. Features ● GFC-1300 is the best experimental platform for training and studying. ● Various fundamental applications for fuel cell are provided. ● Real-time displaying and logging for the fuel cell voltage, liquid level and temperatures of fuel cell and power-generating module. ● Windows-based software is adopted. CIC - 800 A NIVEL P - PT Interface Lab An interface is a hardware and software data transmission regulator that controls data exchange between the PC and other peripheral devices, including RS-232C, AT-BUS, IDE, SCSI, ISA, PCI, AGP, IrDA, GPIB, USB, IEEE-1394, Wireless etc... Each interface device inherits different specifications such as transmission rate, data format, protocol and applications. Accordingly, learners can familiarize themselves with each kind of interface devices. CIC-800A contains multi-purpose interfaces modules, inclusive of serial port (RS-232C), parallel port (Centronics) and universal serial bus (USB2.0) that can be used for various peripheral devices. Add-on modules are available for experiment purpose. The RS- 232C and centronics interface firmware adopt Atmels chipset modules, and use Microsoft visual C++ 6.0 as developing tools. The USB 2.0 interface firmware adopts cypresss chipset modules, and uses Microsoft visual C++ 6.0 as developing tools. By learning traditional and popular interfaces, users can reap the benefits. Additionally, we also provide source codes and execution files for further studying.CI - 33001 C NIVEL P - PTCPLD/FPGA Prototyping Board Features ● Adopt Atmel ATF1508-15 CPLD chip is compatible with Altera MAX 7128, containing 128 microcells over 2500 usable gates, which is able to reprogram over 10k times. ® ● Using Altera MAX+PLUS II for chip development, users can use graphic or text editor (HDL syntax) to design, simulate and implement digital circuit easily. ● The program is downloaded from PC to CPLD chip via series port with JTAG technology. ● Providing some simple I/Os for design efficiency ● Reserving large hardware design area best for circuit prototyping and student project implementation ● Best solution for the shortage of budget
    • *i3net Electronic CIC- 33004 NIVEL P - PT CPLD/FPGA Experiment Board Features ● Atmel ATF1504-15 CPLD chip is compatible with Altera MAX 7064, containing 64 microcells over 1000 usable gates, which is able to reprogram about 10k times. ® ● Using Altera MAX+PLUS II for chip development, users can use graphic or text editor (HDL syntax) to design, simulate and implement digital circuit easily. ● The program is downloaded from PC to CPLD chip via series port with JTAG technology. ● Providing some simple I/Os for design efficiency ● Suitable for new FPGA designers ● Best solution for the shortage of budgetCIC - 310 NIVEL P - PTCPLD/FPGA Digital Circuits Development System CIC-310 CPLD/FPGA Development System is self-contained system, which contains stabilized DC power supplies, Development Board , and Experiment Board. CIC-310 also provides digital system designers for hardware verification which enables students to learn digital system design efficiently. Features ● FPGA (FLEX 8000) download board (84pin) ● I/O experiments board ® ● MAX+PLUS II development software (student version) ● Program manager software for program download and In-System-Programming ● Experiment manual CIC - 500 NIVEL P - PT DSP Development And Experiment System CIC-500 is a DSP development system designed for learning DSP hardware implementations. The system combines both DSP chip for signal processing and FPGA chip for I/O control. With various built-in I/Os and several implementation examples, ranging from basic DSP theory to advanced DSP applications, users are able to learn DSP implementations efficiently. Features ● FPGA (FLEX 8000) download board (84pin) ● Program manager software for program download and In-System-Programming ● Additional training content : DC motor, stepper motor, temperature and PLC I/O controls I/O expanded socket included
    • *i3net ElectronicCIC - 560 NIVEL PT CIC-560 training system is designed based onAdvanced FPGA Development System the latest digital technology in conjunction with EDA experimental teaching material. This training system consists of FPGA chip with higher logic elements and large number of pins. Therefore, students are able to develop, implement and verify design of basic or advanced digital circuit, digital signal processor and CPU/MCU. This system is equipped with ADC/DAC analog module, keyboard, LCD display, PS2, VGA, UART, SCI interface, LEDs, 8-digit 7-segment displays, DC motor and stepper motor which allow students to handle complex mixed signal design and digital control design. Features ● CIC-560 is well equipped for complex digital circuit design. ● Ideal for professional IC designers, R&D engineers, undergraduate ● It provides AD/DA converter, keypad, LCD display, PS/2, VGA, and graduate students to learn IC design and software development. UART, SCI interface, LEDS, 8-digit 7-segment LED display, ● Develop and verify basic and advanced digital circuit, digital step motor and DC motor driver circuits. signal processing and CPU/MCU with large-element and ● Suitable for the curriculum training in electronics, electrical multi-pin FPGA chip. engineering, information, communication and automation field. CIC - 900 NIVEL PT ARM9 Start Kit Today SoCs are widely applied in the computer, communications, consumer electronics field- mobile phones, PDAs, laptops, DTVs, and other devices. This is the beginning of the SoC era. CIC-900 ARM9 Start Kit equipped with Samsungs S3C2500 16/32-bit RISC microcontroller on the basis of an ARM9 CPU core which is a cost effective and superb performance microcontroller solution for ethernet-based systems, for example SOHO router, internet gateway, WLAN AP, etc.. The CIC-900 ARM9 Start Kit is intended for the beginner who will study the architecture and operation of the System-on-Chip devices.All applications are related to new and exciting technology. It also serve as a lab course for undergraduate and master students of computer science, computer engineering and electrical engineering. Features ● Source codes provided ● Guided learning software platform ● Protective case ● Complete teaching tools and manuals ● Complete boot loader teaching solution
    • *i3net Electronic CIC - 910 A NIVEL PT PSoC Training Lab Simple, Easy, Fast, and Fun PSoC (Programmable System on a Chip) is one of the most innovative technologies nowadays. Instead of adopting a traditional MCU with fixed peripherals, or designing a circuit with discrete analog and digital components, the designer can select a single off-the-shelf PSoC on a complete project for mixed-signal applications. Additionally, the unique features of generating the exact peripheral components, programmable interconnect and reuse of on-chip resources not only lowers the cost of materials, but also reduces the design cycle and the inventory risk. By popular demand of the PSoC training facility in the educational market, CIC-910A is designed to meet enormous needs. The introduced CIC-910A training course focuses on digital/analog system integration specification in order to bridge the gap between these design worlds and to provide a step in educating system architects for realizing mixed-signal SoCs. The training lab helps users to understand PSoC operating theory and PSoC application design flow. With various I/O peripherals and versatile experiments, users are able to learn PSoC programming and hardware implementation in a very efficient way.ITS 101 NIVEL P - PTInternet TCP/IP Protocol Training System The internet has permeated among our daily life in every aspect, and it provides the fundamental connection with many state-of-the- art technology such as third-generation cell phones, video communication and information appliances. The core technology of the internet is TCP/IP protocol suite. Understanding TCP/IP protocol suite is crucial to users of the internet at all levels, and it facilitates better application of the internet. Internet TCP/IP Protocol Training System is designed to meet this need. There are seven layers of TCP/IP protocol, and from the second to the forth of which plays the key role in operating system kernels such as Linux and Windows which are difficult for users to understand. Internet TCP/IP Protocol Training System not only reveals the inner workings of TCP/IP protocol software, but also provides methods to modify the behavior of TCP/IP protocol software for experiment purpose. System Features 1. Real-time packet monitor 3. Congestion generator - Observe TCP segments, IP datagrams, ICMP - User programmable packet generation speed up datagrams, UDP datagrams and ethernet frames to 1.2 Mbps - User programmable packet delay, error and lost 2. Packet generator 4. Programmable router - Generate actual TCP segments, IP datagrams, ICMP datagrams, UDP datagrams and ethernet frames - Configurable as a router or host - Manual or programmable packet generation - Can emulate as a firewall or NAT (packet size up to 1500 bytes) - Provide a platform to install user-defined network message procedures for experiment
    • *i3net ElectronicCIC - 700 NIVEL PT Echelon networking technology enables end-usersLonWorks Control Network System to remotely connect, monitor, control, sense, and diagnose intelligent devices. LonWorks networks simplify system management, conserve energy, improve operations and reduce costs. LonWorks solutions provide a unique opportunity for manufacturers of everyday devices to offer new, revenue- generating services, gain useful data about their products and customers, improve brand value, and increase customer retention. For example, manufacturers of dishwashers, washing machines, and other appliances can collect usage data from LonWorks devices that can be used to increase sales as well as improve future product features. They can use the network connection to add new functionality to their products over time with fee upgrades, pay-per-use, or as a free incentive to build customer loyalty. With remote diagnostic capabilities providers can anticipate appliance failures and trigger service calls, reducing down time for consumers. ● Explain profound control network theories in an easy-to- Features understand way fitting for one semester ● Implement the real LonWorks control network system on ● Provide more than 7 real everyday devices, such as fire a single table alarm, temperature sensor and fan for control of network ● Provide complete system tools for users to develop and exercises integrate Lonworks control network ● Detailed step-by-step experiment manual EM - 3000 NIVEL P Electrical Machines System to distinguish the mechaniclal similarities and differences among all electrical machinaries. Students study and turn all kind of electrical machinaries into circuit models for the foundation. Moreover, it enhances students ability for further employing and controlling. Besides facilitating teaching,it makes students be familar with every kind of electrical mechanical test. Features ● Modular design provides flexible experimental requirement ● Each Module panel height compatible with DIN A4 standard ● Using 4 mm safety sockets and plugs ● Each DC/AC power supply equipped with overload protection ● Rotary machine and brake with overheating protection ● Stand-alone machine design equipped with two shaft ends ● Adopting digitized and microprocessor-based measuring and aluminum alloy base for coupling to other machines instrument to provide high-accuracy measurement ● Training panel uses 5 mm isolation bakelite, printed ● Brake with constant speed / constant torque function, easy component symbol, value and function, easy to connect to operate ● Fully protected system safe to connect various kind of machines ● Drawing complete T/N curve ● Providing powerful computer measuring software for saving ● Connecting to PC, measuring and drawing characteristic graphic file, drawing and printing characteristic curves curve available ● For the sake of safety, the system normally operates at ● 300W-grade designed equipment suitable for learning the three-phase 220V. Different line voltages can be adjusted theory and characteristics of electrical machines by system transformer.
    • *i3net Electronic The PE-5000 Power Electronics Training PE - 5000 NIVEL P - PT System consists of 28 experimental modules, Power Electronics Training System a three-phase squirrel cage motor, load, control and measuring devices. It inculde single-phase rectifiers, three-phase rectifiers, DC choppers, inverters and application experiments. Features The PE-5000 is the combination of power, electronics, and control. It has wide applications of solid-state electronics to the control and conversion of electric power. Popular circuits of power electronics contain rectifiers, choppers and inverters. The experimental for PE-5000 modules includes converter, power supply, load, control and testing modules. These experimental modules and instruments will be introduced and demonstrated in the subsequent experiments.PLC - 100 NIVEL P - PTProgrammable Logic Controller (FATEK PLC) Trainer Since PLC (Programmable Logic Controller) was first introduced in 1970, it has been in common usage in various industries such as machine and process controls. Designed with the latest microprocessor and electronic circuitry, today’s compact PLCs features high reliability, high performance, high speed and networking. The use of PLCs in automated production lines enhances system reliability, product quality, information sharing, efficiency and flexibility and thus reduces costs. PLC-100 is a self-contained trainer which consists of a FATEK PLC main unit and commonly used I/O devices for simulation. It provides students with a thorough understanding of the theories and applications of programmable logic controllers. The trainer enables students to learn step by step from the fundamentals of PLC to more advanced controls used in industry. Features ● Input-simulation switches function as level and pulse input for different input signal ● Installation of output relay helps to increase load current ● Easy-to-use, windows-based development software ● With various peripheral devices and other devices that support external extensions, particularly suited for laboratory experiment and project implementation ● Equipped with various simulations I/O devices for the convenience of studying and observing the results ● Use 4mm safety sockets input/output terminals to ensure the physical safety of users ● Easy to carry, move and store with a suitcase design ● Source mode (standard) or sink mode (option) upon request
    • *i3net ElectronicPLC - 200 NIVEL P - PTProgrammable Logic Controller (SIEMENS PLC) Trainer Since PLC (Programmable Logic Controller) was first introduced in 1970 , it has been widely applied to various industrial uses such as machine and process controls. Designed with the latest microprocessor and electronic circuitry, todays compact-size PLCs provide the features of high reliability, high performance, high speed and networking. The use of PLCs in automated production lines enhances system reliability, product quality, information sharing, efficiency and flexibility and thus reduces costs. PLC-200 is a self-contained trainer which consists of a SIEMENS PLC main unit and commonly used I/O devices for simulation. It offers students excellent theories and wide applications of programmable logic controllers. The trainer enables students to learn step by step from the fundamentals of PLC to more advanced controls used in industry. Features ● Input-simulation switches function as level and pulse Input for ● Equipped with various simulations I/O devices for studying and different input signal ● observing the results Installation of output relay helps to increase load current ● Use 4mm safety sockets Input/Output terminals to ensure users ● Easy-to-use, windows-based development software ● physical safety With various peripheral devices and other devices that support ● Easy to carry, move and store with a suitcase design external extensions, particularly suiting laboratory experiment and project implementation PLC - 300 NIVEL P - PT Programmable Logic Controller (MITSUBISHI PLC) Trainer Since PLC (Programmable Logic Controller) was first introduced in 1970 , it has been widely applied to various industrial uses such as machine and process controls. Designed with the latest microprocessor and electronic circuitry, todays compact-size PLCs provide the features of high reliability, high performance, high speed and networking. The use of PLCs in automated production lines improves system reliability, product quality, information sharing, efficiency and flexibility and thus reduces costs. PLC-300 is a self-contained trainer which consists of a MITSUBISHI PLC main unit, I/O devices for simulation and I/O devices that are commonly used. It provides students with a thorough understanding of the theories and applications of programmable logic controllers. The trainer enables students to learn step by step the fundamentals of PLC and more advanced controls used in industry. Features ● Input-simulation switches with level and pulse Input functions ● With various simulations I/O devices for the convenience for the requirements of different input signal ● Output Relays installation helps to increase load current of studying and observing the results. ● Use 4mm safety sockets Input/Output terminals to ensure ● Easy-to-use, windows-based development software ● Equipped with various peripheral devices and other devices the physical safety of users. ● Easy to carry, move and store with a suitcase design that can support external extensions, particularly suits for laboratory experiment and project implementation.
    • *i3net Electronic EM - 3360 - 3A NIVEL P - PT AC Induction Motor W inding Trainer EM-3360-3A 1Ø-2P EM-3360-3A 1Ø-4P Features ● Use 4mm safety socket terminal ● The clearly- printed winding set codes and colorful wire on top allow user to do winding and operation easily ● The power input with the motor circuit breaker ● Easy linking to brake controller unit for measure and draw the characteristics of each winding motor through PC ● Plug-in panel helps teachers complete the experiments easily and quickl y (Optional) EM-3360-3A AC Induction Motor Winding Trainer is a motor that can be connected for various poles as the self-starting three-phase induction motor and single-phase induction motor which is used with the resistor or capacitor starting. Students can learn the different types of motor winding through the simple winding connection. Using the optional Magnetic Powder Brake Unit (EM-3320-1A) and Brake Controller (EM-3320-1N), i t can offer external load torque to see the characteristics of different types of motor.EM - 3350 NIVEL P - PTCutaway Model of Electrical Machine Cutaway models are made from normal electrical machines. The stator is cut away by 1/4 over the entire length for an optimum view of the internal construction of the machine and it is still operating. The cutaway surfaces are protected against corrosion.
    • *i3net ElectronicDT - 01 NIVEL P SpectionsDigital Trainer ● AC adaptor jack : I/P DC + 8 V, 1.5 A ● Pulse switch : two bounce-free push-buttons ● Logic switch : Eight logic level switches in DIP type ● DC O/P : DC + 5 V, 750 mA for user ● B-023 breadboard : Solderless breadboard with 1580 interconnected tie points ● Clip terminal : Logic probe clip terminal ● LED display : Eight LED buffered logic level indicators. ● BNC jacks. ● Banana jacks. ● Clokc adjustment : Fine adjustment of clock frequency ● Select switch : Clock range selection L : 10-40Hz. H : 1K-20KHz With breadboard, digital circuits, flip-flops and monostable multivibrators, counters, encoders, decoders, multiplexers, demultiplexers and sequencers, resistor, LED and 7 segments LED displays, memory devices, etc.. ETS - 8000A NIVEL P General Digitized Training System The ETS-8000Ais a basic digital logic circuit training system. It includes combinational logic and sequential logic experiment circuit. The course content of experiment has hardware emulation and software simulation. All necessary equipment for digital logic experiment suchas power supply, signal generator,indicator, measurement are installed on the main unit. Features ● Suitable for combinational logic, sequential logic experiments and designs ● Ideal tool for learning the basics of digital logic circuits ● Comprehensive power, signal supply and measurement devices for making experiments easily ● Expandable and flexible experiments with universal breadboard ● All supply units are equipped with overload protection for safety ● Computer interaction includes software simulation & hardware emulation
    • *i3net Systems CIC - 900 NIVEL PT Today SoCs are widely applied in the computer, communications, consumer electronics field- mobile phones, PDAs, laptops, DTVs, ARM9 Start Kit and other devices. This is the beginning of the SoC era. CIC-900 ARM9 Start Kit equipped with Samsungs S3C2500 16/32-bit RISC microcontroller on the basis of an ARM9 CPU core which is a cost effective and superb performance microcontroller solution for ethernet-based systems, for example SOHO router, internet gateway, WLAN AP, etc.. The CIC-900 ARM9 Start Kit is intended for the beginner who will study the architecture and operation of the System-on-Chip devices.All applications are related to new and exciting technology. It also serve as a lab course for undergraduate and master students of computer science, computer engineering and electrical engineering. Features ● Source codes provided ● Guided learning software platform ● Protective case ● Complete teaching tools and manuals ● Complete boot loader teaching solutionITS 101 NIVEL P - PTInternet TCP/IP Protocol Training System The internet has permeated among our daily life in every aspect, and it provides the fundamental connection with many state-of-the- art technology such as third-generation cell phones, video communication and information appliances. The core technology of the internet is TCP/IP protocol suite. Understanding TCP/IP protocol suite is crucial to users of the internet at all levels, and it facilitates better application of the internet. Internet TCP/IP Protocol Training System is designed to meet this need. There are seven layers of TCP/IP protocol, and from the second to the forth of which plays the key role in operating system kernels such as Linux and Windows which are difficult for users to understand. Internet TCP/IP Protocol Training System not only reveals the inner workings of TCP/IP protocol software, but also provides methods to modify the behavior of TCP/IP protocol software for experiment purpose. System Features 1. Real-time packet monitor 3. Congestion generator - Observe TCP segments, IP datagrams, ICMP - User programmable packet generation speed up datagrams, UDP datagrams and ethernet frames to 1.2 Mbps - User programmable packet delay, error and lost 2. Packet generator 4. Programmable router - Generate actual TCP segments, IP datagrams, ICMP datagrams, UDP datagrams and ethernet frames - Configurable as a router or host - Manual or programmable packet generation - Can emulate as a firewall or NAT (packet size up to 1500 bytes) - Provide a platform to install user-defined network message procedures for experiment
    • *i3net SystemsCIC - 700 NIVEL PT Echelon networking technology enables end-usersLonWorks Control Network System to remotely connect, monitor, control, sense, and diagnose intelligent devices. LonWorks networks simplify system management, conserve energy, improve operations and reduce costs. LonWorks solutions provide a unique opportunity for manufacturers of everyday devices to offer new, revenue- generating services, gain useful data about their products and customers, improve brand value, and increase customer retention. For example, manufacturers of dishwashers, washing machines, and other appliances can collect usage data from LonWorks devices that can be used to increase sales as well as improve future product features. They can use the network connection to add new functionality to their products over time with fee upgrades, pay-per-use, or as a free incentive to build customer loyalty. With remote diagnostic capabilities providers can anticipate appliance failures and trigger service calls, reducing down time for consumers. ● Explain profound control network theories in an easy-to- Features understand way fitting for one semester ● Implement the real LonWorks control network system on ● Provide more than 7 real everyday devices, such as fire a single table alarm, temperature sensor and fan for control of network ● Provide complete system tools for users to develop and exercises integrate Lonworks control network ● Detailed step-by-step experiment manual
    • *i3net ElectricKL - 100 NIVEL S - P KL - 200 NIVEL S - P Linear Circuits Lab (2) - Electronic Circuits Lab The KL-200 Linear Circuits Lab(2) - Electronic Circuits Lab is a comprehensive and self-contained system suitable for anyone engaged in electronic circuit experiments. All the necessary equipment for electronic circuit experiments such as power supply, function generator, analog and digital meters are installed on the main unit. The 17 modules cover a wide range of essential topics for electronics circuit. It is a time and cost saver for both students and engineers interested in developing and testing prototype circuits. Features ● ● With universal breadboard for circuit designing and Ideal for electronic circuit experiments and designing exercises prototypes ● ● All modules equipped with an 8-bit DIP switch for fault Integrated experimental circuit and trainer with comprehensive experiment curriculum simulations ● Supply complete training device easy and effective for Individual keeping case for all modules easy carrying and experiments storage facilities
    • *i3net ElectricKL - 210 NIVEL S - PBasic Electricity Circuit Lab Features ● Ideal for students to learn the design of electrical, electronics and digital logic circuits. ● T learn efficiently, power supply, function generator and o measurement unit are all included. ● All supply units are secured with overload protection. ● With one main unit, user can choose the needed modules for different learning topics. KL - 500 NIVEL P-PT Industrial Electronic Trainer To train technicians to be able to install and maintain electronic equipment becomes important nowadays. A good technician should follow state-of-the-art technology and rapid products innovation. Our system is intended for the technical education. In fact, KL-500 is adapted to theoratical and pratical courses for studying power electronics and industrial electronics. Features ● Comprehensive study including the theoretical study and practical exercises ● Use of industrial-type components, devices and circuits
    • *i3net ElectricACS - 1000 NIVEL PAnalog Control System ACS-1000, covered with many technical disciplines, explicates the central significance of Analog Control System. This applies particularly in mechanical and electrical engineering, in production and process technology. It is indispensable to plant and system technology. In the automation field, important optimization tasks would be quite impossible to be accomplished without closed-loop control technology. In line with its increasing importance, closed-loop control has become an essential subject in professional training and further education for many professions. In the newly formulated training curriculum, this technology plays an important role covering a number of subjects in syllabuses for training in industry and the crafts. Features ● Modularized ACS-1000 is flexible enough to cater to ● Control engineering is an exciting discipline. It offers the the needs of all level learners to make related experiments. quickest and best way to learn system control to improve ● The whole control modules help students to understand production processes. Electronic analog control and control theory and application of hands-on motor control simulation have become the cornerstone of technological through our comprehensive and step-by-step teaching advancement. curriculums. K&H provides ACS-1000 for students to observe the testing result of Proportional-Integral-Derivative (PID) controllers ● We also provide PC based digital storage oscilloscope as well as phase-lag and phase-lead controllers. module as interface to facilitate data storage and analysis from computer. (Option) EM - 3000 NIVEL P The electrical machines system leads students Electrical Machines System to distinguish the mechaniclal similarities and differences among all electrical machinaries. Students study and turn all kind of electrical machinaries into circuit models for the foundation. Moreover, it enhances students ability for further employing and controlling. Besides facilitating teaching,it makes students be familar with every kind of electrical mechanical test. Features ● Modular design provides flexible experimental requirement ● Each Module panel height compatible with DIN A4 standard ● Using 4 mm safety sockets and plugs ● Each DC/AC power supply equipped with overload protection ● Stand-alone machine design equipped with two shaft ends ● Rotary machine and brake with overheating protection and aluminum alloy base for coupling to other machines ● Adopting digitized and microprocessor-based measuring ● Training panel uses 5 mm isolation bakelite, printed instrument to provide high-accuracy measurement component symbol, value and function, easy to connect ● Brake with constant speed / constant torque function, easy ● Fully protected system safe to connect various kind of machines to operate ● Providing powerful computer measuring software for saving ● Drawing complete T/N curve graphic file, drawing and printing characteristic curves ● Connecting to PC, measuring and drawing characteristic ● For the sake of safety, the system normally operates at curve available three-phase 220V. Different line voltages can be adjusted ● 300W-grade designed equipment suitable for learning the by system transformer. theory and characteristics of electrical machines
    • *i3net Electric The PE-5000 Power Electronics Training PE - 5000 NIVEL P - PT System consists of 28 experimental modules, Power Electronics Training System a three-phase squirrel cage motor, load, control and measuring devices. It inculde single-phase rectifiers, three-phase rectifiers, DC choppers, inverters and application experiments. Features The PE-5000 is the combination of power, electronics, and control. It has wide applications of solid-state electronics to the control and conversion of electric power. Popular circuits of power electronics contain rectifiers, choppers and inverters. The experimental for PE-5000 modules includes converter, power supply, load, control and testing modules. These experimental modules and instruments will be introduced and demonstrated in the subsequent experiments.EM - 3360 - 3A NIVEL P - PTAC Induction Motor W inding Trainer EM-3360-3A 1Ø-2P EM-3360-3A 1Ø-4P Features ● Use 4mm safety socket terminal EM-3360-3A ● The clearly- printed winding set codes and colorful wire on top allow user to do winding and operation easily ● The power input with the motor circuit breaker ● Easy linking to brake controller unit for measure and draw the characteristics of each winding motor through PC ● Plug-in panel helps teachers complete the experiments easily and quickl y (Optional) EM-3360-3A AC Induction Motor Winding Trainer is a motor that can be connected for various poles as the self-starting three-phase induction motor and single-phase induction motor which is used with the resistor or capacitor starting. Students can learn the different types of motor winding through the simple winding connection. Using the optional Magnetic Powder Brake Unit (EM-3320-1A) and Brake Controller (EM-3320-1N), i t can offer external load torque to see the characteristics of different types of motor.
    • *i3net ElectricEM - 3350 NIVEL P - PTCutaway Model of Electrical Machine Cutaway models are made from normal electrical machines. The stator is cut away by 1/4 over the entire length for an optimum view of the internal construction of the machine and it is still operating. The cutaway surfaces are protected against corrosion.
    • *i3net Telecomunications DGS -- 100 NIVEL PT DGS 100 NIVEL PT GSM /GPS Experimental Set Data Communication and Networking GSM /GPS Experimental Set Data Communication and Networking DGS-100 covers two topics in modern communication GPS technology and GSM / G P R S t e c h n o l o g y . In GPS module, the GPS receiver decodes the NMEAdata strings from the satellites and output to software interface for the discussion of current position, speed, direction, time, etc In GSM/GPRS module, the usage of AT commands is introduced. Students can use software interface to send AT command to control GSM/GPRS module, send SMS message and make a phone call through headset interface, or access to the Internet When integrating both GPS and GSM/ Features GPRS modules, the latitude and longitude data received by GPS module, this reference ● It’s a powerful platform for experimenting wireless data will be sent to internet by GPRS service communication when training and education, integrating and report in Google Map Website. GSM/GPRS with GPS modules, FAX Class1, TCP/IP, NMEA0183 and ETSI GSM 07.07 protocols to be one set.BT - 3000 NIVEL PTWireless Embedded Training System Wireless Embedded Training System, BT-3000 was developed to educate wireless control and embedded technology. Its distinguished technology compared to wired embedded system is wireless control USING Bluetooth protocol. Wireless embedded technology will be used in application of Home networking, Ubiqitous sensor networking, Telemetric and Industrial control innear future. Through experiment using BT-3000 students learn hardware design and wireless communication protocol easily. Hardware design includes Controller and modules and software design includes bluetooth communication protocol.
    • *i3net TelecomunicationsBT - 3000 NIVEL PT ● Protocol Analysis and Simulation / EmulationBluetooth Telecom Trainer * Protocol Training - Protocol Command - Protocol Leveling - Protocol Signaling * Profile Training - Profile Leveling - Profile Signaling - Profile Command ● Demo Function - Audio Conversation - File Transfer - Chatting ● Data Communication Experiment Using ● Various Interface (USB, UART) ● Hardware Experiment is Available ● Multi Purpose Usage.(Education, Research and Development) ● Bluetooth host Programming. ● Options for application ● Full documents. USC -- 7000 NIVEL PT USC 7000 NIVEL PT Ubiquitous Sensor Control System [USC-7000] Several clients of a server (slave) connected with two hands is possible, if you are building a ubiquitous lab is a favorable system. USC-7000 system with one server and N clients consists of a single server has 10 ports can be connected to the computer, and 10 clients and can communicate with the students a small embedded system with Bluetooth 1:07 a wireless network with easy to understand and communicate directly to students to try to create a wireless communications program, a program written to determine the process can acquire. In addition to the efficiency of the equipment at low cost is possible to build a wireless lab.USC - 5000 NIVEL PTUbiquitous Sensor Control Training System ● USC-5000 wireless control training, as well as many kinds of sensors, motors, power training using a variety of applications through a variety of future home networking, ubiquitous, telematics, industrial technology education to be applied to the control equipment. sensor , motors, power can be controlled in real time and 1:07 practice and network control hardware, production and programming exercises are available. ● USC-5000 traditional wired forms embedded in the educational system beyond the future, endless development possibilities with home networking and ubiquitous system for the development of education is a device.● USC-5 thousand for the education system, as well as related hardware, wireless connectivity on a complex algorithm designed to be easy to ● USC-5 thousand a simple wireless control for the education as well learn Ubiquitous by the overall education system was constructed to do. as various applications Through a variety of training students in the field can be applied directly to the skills that are intended to.● USC-5 thousand students in the breadboard circuit was built and so that practice quite figure.
    • *i3net Telecomunications UHN - 3000 NIVEL PT Practice areas of the ubiquitous home network equipment A variety of wired and wireless control, including control system capable of Sweet Home is a network training. Appliances and communication devices in real time and can control the security system based on technology from the application to educate. ● External Communications [external and internal communication between home] - by phone, remote control (ARS reulyiyong) - Ethernet and control over the network - CDMA modem using a message-passing capabilities ● Internal Control [Host and client communication] - Bluetooth / Zigbee wireless control features - Wireless LAN radio control - Infrared wireless control function - RS-485, PLC through a wired control - Lighting control (dimming included) - curtains and viewfinder, remote control blinds [motor control] - in the form of various types of embedded device control - at least in case of sending an SMS text capabilities - surveillance, intrusion, surveillance topics - information gathering capabilities through various industrial sensorsRFID - DUAL NIVEL PT This RFID Training system presents the RFID operation and standardization processes.Training System Passive tag(13.56MHz) . The passive tag does not contain a power supply, thus uses the energy transferred from a reader which results in reduced distance. Active tags has a built-in power supply that allows long-distance communication reaching to 10 meters. ● Stedent can learn RFID system design skill more effectively, since RFID hardware operation can be observed through experiment. ● Not firmware but PC based programming trainer ● Air Protocol can be programmed by using C, C++ ● Air Protocol analysis is possible ● Student can experiment and comprehend transmission protocols such as anticollision and ISO 15693, EPC global
    • *i3net TelecomunicationsRFID - EPC NIVEL PTTraining System[RFID-EPC] ● Trainning by using EPC Global Network ● Practice for EPC Global Network Theory - protocol Exercise between Reader and Tag - Middleware programming ● Practice for Tag Data read/write ● Mapping of Tag Data with real product ● Internet Connection between Reader and Server ● Database Construction coindiding with Tag Data and Real product ● Middleware Application RFID - 3000 NIVEL PT Shopping System [RFID-3000] RFID Shopping System, which could replace the Bar-code system, can be actually applied to commercial products as well as educational use. RFID Shopping System is not the system identifing each product s price one by one like bar-code system but the system identifing the whole at short time throuhg RFID technology. That is, Reader identify the every goods prices at one time through Tags that is attached to every goods. If the prices which is loaded into one shopping cart identified by Reader, total amount is automatically calculated and the information is transmitted to PC. More detailed explaination is as below● Put the goods with tag into shopping cart.● If the shopping cart passed the counter, RFID Antenna identify the ● Every goods information and its prices are displayed on PC monitor, UID information from every goods through the Tag and the information also calculate the total amount. is transimitted to PC server. ● If user present RFID Tag(card) to Card Reader, the purchased amount is counted.RFID - 5000 NIVEL PTLogistic System [RFID-5000] By deploying RFID Reader and Antennas to the path where the goods are input and destributed, user could know the followings; ● Ordering status from PC monitor which RFID operation S/W is downloded ● Input information of goods such as item, price and quantity. ● Stock status which is stored into the rack ● Inferior goods information which is sorted out while moving from input conveyor belt to rack. ● Delivery order information ● Distributing goods information after transporting to ordered place Above process and information is acquired by tag sticked on every goods. That is, if the good is passed over one place to another the goods information is identified by Reader, Antenna and Tag. The information is transmitted to PC and counted its trace by RFID Logistic System. In conclusion, user can learn how to deploy and test RFID systems under real-world conditions to increase efficiency and cut costs & etc.
    • *i3net Telecomunications RFID USN - 6000 NIVEL PT RFID/USN-6000 is an experimental equipment to educate EPC Global Network, RFID/USN theory & Programming, Middleware application, Sensor data conversion● RFID/USN by EPC Global Network - Understanding RFID/USN Theory. - Sensor Data Processing Technology using RFID/USN.● Active Tag / Embedded System Programming - Embedded Programming Education of Sensor Data Processing using RFID/USN based on AVR Environment.● Encryption of Data which is transmitted / received between Tag and Reader - Encryption Technique of Sensor Data, and its Algorithm Processing Technology.BCT - 100 NIVEL PTPractice basic communication equipment Embedded Lab, Microprocessor Lab, I / O control, training, communication can be used in practice - practice a low-power high-performance microprocessors using the ATMEGA-128 MPU Text LCD built-in keypad, buzzer, dijiteolpoteuip / output, etc. for microprocessor using self-understanding and practice, improved embedded C programming skills are designed to give help. - RS-four hundred and eighty-five Eternet exercises and BCT-100 equipment with each other server / client in a way digital communication and control exercises You can make a new network communication protocols and can be checked directly by coding practice is - can be set by the server and the client, the communication state transfer for yourself so that you can see the basic character, ereobokgudeung provides a variety of features. - communication practice and Rox LabView I / O controller training Microprocessor Lab, I / O controller training, and is available communication can be used in practice and, RS-485 and Ethernet devices to the BCT-100 between the server / client in a way to practice digital communication and control, and direct a new network communication protocols by coding practice and is now available. MT -- 3000 NIVEL PT MT 3000 NIVEL PT ● Using serial communication, the chat feature Mobile Lab equipment [MT-3000] ● Bi-directional (Full Duplex) experiment can be a voice call. ● Possible two-way data communication test. ● Unidirectional (Half Duplex) voice and data communications can experiment ● Propagation environments with multiple sets of simultaneous actions is silhamyi. ● Unit of board experiments and practical training in one system can be finished. ● Automatic mode (Auto mode) and manual mode (Manual mode), select the experiment possible. ● Equivalent level of commercial products and implementation of software programs. ● When selecting the automatic mode mobile communications products behave like real use. ● LED display. ● Overcharge protection
    • *i3net TelecomunicationsMT - 2000 NIVEL PT ● Full Duplex Voice Conversation & Full Duplex Data Communication. ● Half Duplex Voice Conversation & Half Duplex Data Communication. ● Experiment for RF interference & mobile emvironment is available. ● Board level and full system level experiment is available using one set. ● Auto Mode and Manual is selectable. ● Built-in Software equal to those in Commercial Products. ● Operating like as Commercial Mobile Products in Auto Mode. ● LED Indicator. ● Over Charge Protection. MT - 1500 NIVEL PT ● Allowing students to train themselves about board manufacturing. ● Learning about parts and product through actual manufacturing. ● Capable of operation measurement for each circuit. ● Providing PCB designed with patterns. ● Capable of Full Duplex voice conversation training. ● Capable of Half Duplex voice conversation training. ● Capable of Detailed Module Training at Single Board Level. ● Training in full set experiment with four boards combined.CMT - 5000 NIVEL PTCellular Integrated Training System This device serves as a base station and mobile communication base stations overall practical training course is possible, base stations and base stations and mobile diagnostic changes in the parameters is possible.
    • *i3net Telecomunications MW -- 5000 -2000 NIVEL PT MW 5000 -2000 NIVEL PT Microwave Communication Training System Micro wave band most commonly used in practice by the active devices and passive components provided in the textbook Microstrip Line Microwave Theory and Design Theory applied to the device directly to the device is designed and manufactured so that you can see and measure the content is being. Transmission system with a combination of devices to configure and connect your computer to enable the communication consists . The software that came with your computer using the program text and file transfer through the system possible by the practice, modulation and microwave devices and communications systems were configured to acquire knowledge. This method uses the FSK modulation frequency the 2.4GHz ISM band, the transfer rates can be up to 14,400 bps. -MW-five thousand: 5.8GHz ISM band . device lab parts kit for sale, and provided with reference to the standard set for students to design microwave devices were .MW - 1000 NIVEL PTMicrowave Training System Microstrip RF design theory and the theory applies directly to the microwave device design, fabrication and measurement can try hands-on kit comes with a set of standards and practices of students in the ever-use microwave technology to help educate WATS - 2002 NIVEL PT Wave and Antenna Training System Calibration function. • emulation experiments by Mycom and hardware implementation. • a user interface using the Windows GUI. • Practice the antenna can be manufactured
    • *i3net TelecomunicationsWIMAX - 5000 NIVEL PTWiMAX (IEEE802.16d) Communication Training System WIMAX protocol stacks based on the MAC (Media Access Control) layer design of the software as a platform for education, environment, MontaVista Linux and embedded software design practice, OFDM (Orthogonal Frequency Division Multiplexing) modem (Modulation & DEModulation) helps the understanding of . educational platform AP (Access Point: BS) and UE (User Equipment: terminal), two hardware components, and sample programs and educational materials, specifications and manuals, and documentation is provided. GSM - 5000 NIVEL PT GSM Trainer GSM - 5000 is the training enabling users to study GSM/gprs communication protocol and to experience overall knowledges about mobile communication through GSM module control.To control the GSM module, there is advanced set of AT Commands according to GSM ETSI ( European Telecommunications Standard Institutes) GSM - 5000 has full training contents of Command Level Study on AT Commands GSM - 5000 is based upon GSM cellular phone and allows for connection to PC for operation and programming. This trainer is designed to instruct the students System operation, Theory, Programming, Servicing, Problem diagnosis of GSM cellular mobiles system. GSM - 5000 is mainly used for students to learn fundamentals in moblie communication systems such as mobile station network entry, calling process, network signals, AT Commands, Audio communication, Short message services... etc. The training covers yhe command level study whit AT Commands, GPRS Intenet Connection, Multiplexer Protocol training and Hadware test experiments, Introduce of Embedded OS system and GUI programming on GSM - 5000 throuhg the provided source codes.MGT - 3000 NIVEL PT This trainer enables user to learn about J2MEMobile Game Trainer Programming,hoe to developed J2ME Mobile Games and J2ME Network Server/Client. Also the can learn the porting and testing to J2ME Mobile games by connecting to real Cellular Mobile ( GSM type) Functions ● A student can learn how to developed mobile games based on J2ME ( Java2 Mobile Edition ) Platform. since this toolkit provide j2me tutorial, example code and Mobile Phone Emulator software. ● A student can get advance skill for developing mobile games with example code and Mobile Game Toolkit Server ● A student can get advenced skill for porting and testing mobile games to real cellular phone with example code and Mobile Game Toolkit Server. ● Mobile Game Toolkit Server can be used Network Game Server when student develop mobile network game with using mobile phone Emulator.
    • *i3net Telecomunications GPS -- 5000 NIVEL PT GPS 5000 NIVEL PT GPS technology is widely being used for PDA, Smart GPS Trainer phone, Navigation system .. etc. GPS - 5000 is the GPS training system enabling the user to acquire the skills of GPS technology through the practice os Satellite Position, GMT Time, Latitude, Longtitude, Speed, PDOP, HDOP, VDOP, etc using GPS Platform and NMEA0183 Protocol. User can also have a Software training about GPS protocol, Analysis, GUI of GPS on Window CE Embedded OS. Functions ● Understanding concept of GPS ● Study of DOP (PDOP, HDOP, VDOP) ● Analysis of NMEA - 0183 protocol ● Development Windows CE based user ● Measurement of Latitude & Longitude Application ● Debugging experience with serial portCMTS - G - 7000M NIVEL PTGSM - GPRS type, Cellular Mobile NetworkAnalyzing Solution ( Multi DM + PC bases ) ● Supports Asynchronous & Synchronous: - Asynchronous (transmission) : GSM/GPRS WCDMA (UMTS) ( Synchronous (transmission) : (IS-95A,B) CDMA EVDO) ● Provides real time logging and display ef Layer 1,2,3 messages, Packet messages (PPP , TCP/IP ,UDP) , and RF KPLs ● Up to 2 mobile terminals and 2 scanners can be put on test simultaneously (2Voice, or 2 Data + 2 Voice/MOS) ● Provides quality measurement function for Data Service This Cellular Mobile Network Analyzer supports (FTP , HTTP, Ping/TraceRT , E - Mail , UDP, SMS, WAP )various Specs like below which is covering 2G, 2,5G of ● Voice Servicemobile technologies in real time operation byconnecting with real Base Station. And thus, this (Voice MOS )system has below features. This Cellular Mobile Network Analyzer supports various Specs like below which is covering 2G, 3G of mobile technologies in real time operation by CMTS -GW - 7000M NIVEL PT connecting with real Base Station and real Mobile GSM - WCDMA type, Cellular Mobile Network Phone. And thus, this system has below features. Analyzing Solution ( Multi DM + PC bases ) ● Supports Asynchronous & Synchronous: - Asynchronous (transmission) : GSM/GPRS WCDMA (UMTS) ( Synchronous (transmission) : (IS-95A,B) CDMA EVDO) ● Provides real time logging and display ef Layer 1,2,3 messages, Packet messages (PPP , TCP/IP ,UDP) , and RF KPLs ● Up to 2 mobile terminals and 2 scanners can be put on test simultaneously (2Voice, or 2 Data + 2 Voice/MOS) ● Provides quality measurement function for Data Service (FTP , HTTP, Ping/TraceRT , E - Mail , VOD-Video MOS, UDP, SMS, WAP, ) ● Voice Service (Voice MOS, Video Telephony, )
    • *i3net TelecomunicationsWCDMA - 5000 NIVEL PTW-CDMA Trainer W-CDMA (Widedand Code Division Multiple Acces ) is an air interface standard found in 3g mobile telecommunications networks. W-CDMA has been developed into a complete set of specifications, a detailed protocol that defines how a mobile phone communicates with the tower, how signals are modulated, hoe data grams are structured and system interfaces are specified allowing free competition on technology elements. W-CDMA transmits on a pair of 5MHz - wide radio channels, while CDMA 2000 transmits on one or several pairs of 1.25MHz radio channels. ANDROID - 5000 NIVEL PT Smartphone is a mobile phone that offers more advanced computing Smart Phone Trainer ability and connectivity. Smartphones may be thought of as handheld computers integrated within a mobile telephone. A smartphone allows the user to install end run more advanced applications based on a specific platform. Smartphones run complete operating system software providing a platform for application developers. So nowadays we can consider a smartphones as a Personal Pocket Computer (PPC) with mobile phone functions because these devices are mainly computers, although smaller ones than desktop computer. Growth in demand for advanced mobile devices boasting powerful processors, abundant memory, larger screens and open operating system has outpaced the rest of the mobile phone market for several years.
    • *i3net MechatronicsKL - 200 NIVEL S - PLinear Circuits Lab (2) - Electronic Circuits Lab The KL-200 Linear Circuits Lab(2) - Electronic Circuits Lab is a comprehensive and self-contained system suitable for anyone engaged in electronic circuit experiments. All the necessary equipment for electronic circuit experiments such as power supply, function generator, analog and digital meters are installed on the main unit. The 17 modules cover a wide range of essential topics for electronics circuit. It is a time and cost saver for both students and engineers interested in developing and testing prototype circuits. Features ● ● With universal breadboard for circuit designing and Ideal for electronic circuit experiments and designing exercises prototypes ● ● All modules equipped with an 8-bit DIP switch for fault Integrated experimental circuit and trainer with comprehensive experiment curriculum simulations ● Supply complete training device easy and effective for Individual keeping case for all modules easy carrying and experiments storage facilities KL - 210 NIVEL S - P Basic Electricity Circuit Lab Features ● Ideal for students to learn the design of electrical, electronics and digital logic circuits. ● T learn efficiently, power supply, function generator and o measurement unit are all included. ● All supply units are secured with overload protection. ● With one main unit, user can choose the needed modules for different learning topics.
    • *i3net MechatronicsKL - 800 NIVEL P - PTAutotronic Training System The whole system has been modularized to provide electronic and automotive courses with step-by-step experiments on technological e d u c a t i o n a l t r a i n i n g . All theoretical ,experimental and practical learning procedures are supported by a personal computer and dedicated software. The KL-800 can simulate the operation of fuel injection system, ignition system, and the control of exhaust gas, etc. Experiments include the sensors characteristic and operation of various sensors and actuators monitored by microprocessor on the main unit. Features ● Can be assembled as the injection system ● 89C51 computer interface monitor control ● With trouble-shooting simulation function ● Data of fuel injection, ignition and exhaust gas can be acquired and monitored by computer. ● Switch-off input / output function when trouble-shooting is made KL - 800 A NIVEL PT CAN BUS Autotronic Training System The KL-800 A CAN BUS Autotronic Training System is a distributed control system supported by advanced serial bus system CAN (Controller Area Network). CAN is a multi-master bus with an open, linear structure with one bus line and equal nodes. The number of nodes are not limited by the protocol. Each module of KL-800 A system is an ECU or the interoperable device (node) on CAN BUS. Data transfer between modules is achieved by the micro- controllers over CAN BUS. When signals and data are sent to personal computer, the computer monitoring system displays the current status and data of module on PC screen and turns on the warning light if something is wrong. The KL-800 A system can simulate the operation of fuel injection system, ignition system and exhaust gas control. Experiments include the characteristic and operation of various sensors and actuators used in automobiles. Features ● User-friendly GUI design allows the user to display and control ● CAN-compliant modules can be easily connected together using modules on PC screen. the 9-pin D-sub connectors and cables. These modules can ● Each module is equipped with fault simulation switches for interoperate with each other. troubleshooting practice.
    • *i3net MechatronicsPS - 1000 NIVEL P - PT It is well known that “Factory Automation” is an indispensablePneumatic Training System measure to reduce labor cost, improve production efficiency and achieve higher product quality, which is widely adopted by electronic, semiconductor, LCD and mechanical factories. In factory automation, “air pressuring” plays a very essential and critical role. The “PS-1000” is launched to offer enriched education from basic air pressure components, advanced air-pressure loop design to PLC-based electrical control system. The trainee can be upgraded to high-level automation engineer with the help of the “PS-1000” trainer system. Features ● Trainees get familiar with the principles and applications of various air pressure components. ● Trainees learn air-pressure loop design. ● Trainees learn PLC programming, including architecture, instructions and ladder diagram HS - 2000 NIVEL PT It is well known that "Factory Automation" is an Hydraulic Training System indispensable measure ti reduce labor cost, improve production efficiency and achieve higher product quality, which is widely adopted by electronic, semiconductor, LCD and mechanical factories. In factory automation, oil pressuring" plays a very essential and critical role. The "HS - 2000" is launched to offer enriched education from basic oil pressure components, advanced oil-pressure loop design to PLC-based electrical control system. The Trainee can be upgraded to high-level automation engineer with the help of the " HS - 2000" trainer system. Features ● Trainees get familiar with the principles and applications of various oil-pressure loop design ● Trainees learn oil-pressure loop design. ● Trainees learn PLC programming, including architecture, instructions and ladder diagram Features MS - 6000 NIVEL P - PT ● With 6-Stations modular production system, mechatronics Mechatronics Training System training includes distributing, testing, processing, handling, assembly and storing stations that can be operated separately or integrally. ● The modular production system stations allow varying simulation of real production processes that exist in industry field. ● The system is universal, industry-based, modular and flexible for further expansion. ● Students can learn the entire process of production such as feeding, processing, etc... ● Each station simplifies the training of operation and can be expanded sequentially step by step through building complex automated procedure. It is well known that Mechatronic design becomes more and more important in automation field today. MS-6000 is a total solution for Mechatronics training, including mechanical design process, mechanical structure design, mechanism and transmission design, electronic and sensor components and PLC, total 5 major units. The MS-6000 is expected to offer completed and enriched education to trainees.
    • *i3net Bioengineering KL - 710 NIVEL PT Biomedical Measurement Data Acquisition System Features ● The major software allows you to edit data and control the experiment process appearing on the screen. It performs f our general functions: ● Control the data acquisition process including the analog input, analog output, digital input, digital output, pulse generation and trigger start. ● Perform real-time calculation including the math functions, digital filter, wave analysis, rate detection and power spectrum. ● Perform off-line analysis including the statistics, math functions, wave analysis, rate detection and power spectrum. ● There are various types for saving data. KL-710 isa complete data acquisition system that includes both hardware and software for acquisition and analysis of life-science data. The hardware uses the DAQ interface cards from National Instrument As for the software, it is written in LabVIEW. KL-710 system can use PC, Notebook, or PDA to acquire, analyze or store data.KL - 720 NIVEL PTKL - 720 NIVEL PTBiomedical Measurement System Features ● KL-720 contains nine modules, including Electrocardiogram Measurement, Electromyogram Measurement, Electrooculogram Measurement, Electroencephalogram Measurement, Blood Pressure Measurement, Photoplethysmogram Measurement, Respiratory Ventilation Detection, Pulse Meter and Body Impedance Detection. ● The sensors and transducers used in this equipment include pressure transducer, infrared photocoupler, strain gauge, temperature sensor and surface electrode. ● Each module has many test points for changing the frequency bandwidth and amplifiers gain. Thus students can understand the correlation between physiological signal and each circuit stage. This equipment is intended for students to learn how to designspecific measuring circuits and detect the basic physiologicalsignals with practical operation. Moreover, students canunderstand electrical characteristics of sensor and transducer explicitly.
    • *i3net MechanicalKL - 800 NIVEL P - PTAutotronic Training System The whole system has been modularized to provide electronic and automotive courses with step-by-step experiments on technological educational training. All theoretical ,experimental and practical learning procedures are supported by a personal computer and dedicated software. The KL-800 can simulate the operation of fuel injection system, ignition system, and the control of exhaust gas, etc. Experiments include the sensors characteristic and operation of various sensors and actuators monitored by microprocessor on the main unit. Features ● Can be assembled as the injection system ● 89C51 computer interface monitor control ● With trouble-shooting simulation function ● Data of fuel injection, ignition and exhaust gas can be acquired and monitored by computer. ● Switch-off input / output function when trouble-shooting is made KL - 800 A NIVEL PT The KL-800 A CAN BUS Autotronic Training System is a distributed control system supported by CAN BUS Autotronic Training System advanced serial bus system CAN (Controller Area Network). CAN is a multi-master bus with an open, linear structure with one bus line and equal nodes. The number of nodes are not limited by the protocol. Each module of KL-800 A system is an ECU or the interoperable device (node) on CAN BUS. Data transfer between modules is achieved by the micro- controllers over CAN BUS. When signals and data are sent to personal computer, the computer monitoring system displays the current status and data of module on PC screen and turns on the warning light if something is wrong. The KL-800 A system can simulate the operation of fuel injection system, ignition system and exhaust gas control. Experiments include the characteristic and operation of various sensors and actuators used in automobiles. Features ● User-friendly GUI design allows the user to display and control ● CAN-compliant modules can be easily connected together using modules on PC screen. the 9-pin D-sub connectors and cables. These modules can ● Each module is equipped with fault simulation switches for interoperate with each other. troubleshooting practice.
    • Technical Training & Education Dirección: Calle 24 No. 40 - 77 PBX: 57-1- 268 1500 / FAX: 57-1- 244 4748 Bogotá D.C. - Colombia www.i3net.com