MTB#07-26 Specs for 2008 Ford F550.doc

  • 359 views
Uploaded on

 

  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
    Be the first to like this
No Downloads

Views

Total Views
359
On Slideshare
0
From Embeds
0
Number of Embeds
0

Actions

Shares
Downloads
0
Comments
0
Likes
0

Embeds 0

No embeds

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide

Transcript

  • 1. SPECIFICATIONS FOR 2008 FORD F-550 CHASSIS WITH SERVICE BODY AND EQUIPMENT OR EQUAL _COMPLY_ 4x4 SD Regular Cab 165” WB DRW XL (F57) YES / NO Powertrain ____ /____ Powerstroke 6.4L V-8 OHV direct diesel injection 32 valve twin turbo diesel engine * 200 amp HD alternator * 750 amp (total) 78 amp hours (Ah) (total) battery dual batteries * Engine block heater, transmission oil cooler * 5-speed electronic automatic transmission with overdrive, lock-up, driver selection * Part-time four-wheel drive with manual transfer case shift, manual locking hubs * Limited slip differential * 4.88 axle ratio * Stainless steel exhaust ____ /____ Steering and Suspension Hydraulic power assist re-circulating ball steering * 4-wheel disc brakes with front and rear vented discs * Firm ride suspension * Mono-beam non-independent front suspension * Front anti-roll bar * Front coil springs * HD front shocks * Rigid rear axle * Rear leaf suspension * Rear anti-roll bar * HD rear leaf springs * HD rear shocks * Front and rear 19.5” x 6.00” argent steel wheels * LT225/70SR19.5 BSW AT front and rear tires * Outside rear mounted full-size steel spare wheel Safety ____ /____ 4-wheel anti-lock braking system * Dual airbags, passenger side front-impact cancellable airbag * Front height adjustable seatbelts ____ /____ Comfort and Convenience Air conditioning * AM/FM stereo, clock, seek-scan, 2 speakers, fixed antenna * 2 12V DC power outlets, ashtray, front lighter element(s) location * Analog instrumentation display includes tachometer, oil pressure gauge, engine temperature gauge, turbo/supercharger boost gauge, transmission fluid temp gauge, engine hour meter, trip odometer * Warning indicators include oil pressure, engine temperature, battery, key in ignition, low fuel, door ajar * Day-night rearview mirror * Interior lights include dome light with delay, front reading lights * Glove box, front cup-holder, instrument panel bin, dashboard storage ____ /____ Seating and Interior Seating capacity of 3 * Bench front seat with fixed head restraints, center armrest * 4- way adjustable driver seat * 4-way adjustable passenger seat * Vinyl faced front seats with vinyl back material * Full cloth headliner, full vinyl/rubber floor covering, plastic/ rubber gear shift knob, cab back insulator, chrome interior accents ____ /____ Exterior Features Side impact bars, front license plate bracket, fully galvanized steel body material, side steps * Black fender flares * Black side window moldings, black front windshield molding, black rear window molding * Black door handles * Black grille * 2 doors * Trailer harness, brake controller * Driver and passenger manual black folding outside mirrors * Front black bumper with front black rub strip/fascia accent, front tow hooks * Sealed beam halogen headlamps * Additional exterior lights include cab clearance lights * Clearcoat monotone paint ____ /____ Warranty Basic....36 month/36,000 miles Powertrain.............60 month/60,000 miles Corrosion Perforation60 month/unlimited mileage Roadside Assistance..60 month/60,000 miles Diesel Engine60 month/100,000 miles 1B 8/16/2010 MTB#07-26
  • 2. COMPLY YES / NO Dimensions and Capacities ____ /____ Output325 hp @ 3,000 rpm Axle to end of frame...............47.6” 1st gear ratio3.110 Rear tread................................93.6” 3rd gear ratio1.550 Fuel tank............................40.0 gal. 5th gear ratio0.710 Curb weight7,299 lbs. Front GAWR .....7,000 lbs. Front curb weight Torque...............600 lb.-ft. @ 2,000 rpm .....4,200 lbs. 2nd gear ratio...................................2,220 Front axle capacity 4th gear ratio...................................1,000 .....7,000 lbs. Reverse gear ratio..........................2,880 Front spring rating GVWR..................................19,000 lbs. ......7000 lbs. Payload..................................11,010 lbs. Maximum GCWR Rear curb weight.....................3,099 lbs. . . .26,000 lbs. Rear axle capacity ................13,660 lbs. Front legroom Towing capacity....................16,000 lbs. ............41.0” 5th-wheel towing capacity......17,600 lbs. Front hiproom Front headroom..............................41.4” ............67.6” Front shoulder room.......................68.0” Passenger area volume Length..........................................250.0” ....66.8 cu. ft. Height.............................................79.5” Body width93.6” Cab to axle.....................................84.0” Wheelbase165.0” Front tread......................................74.8” Turning radius................................24.3’ 4x4 SD Regular Cab 165” WB DRW XL (F57) Engine: 6.4L OHV Power Stroke Diesel V8 Transmission: TorqShift 5-Speed Auto w/OD (Diesel) Rear Axle Ratio: Limited Slip w/4.88 ____ /____ GVWR: 19,000 lbs. Packages Order Code 660A (99Y) Engine: 6.8L 3-valve SOHC EFI Triton V10; (44T) Transmission:5- Speed TorqShift Automatic w/OD: Includes tow/haul mode; (X48) 4.88 Axle Ratio; (STDGV) GVWR: 17,950 lb. Payload Package #1; (TFB) Tires: ____ /____ T225/70Rx19.5G BSW AS; (64Z) Wheels: 19.5” Argent Painted Steel (6);(A) HD Vinyl Full Bench Seat w/Recline: Includes integrated armrest and Cupholders located in armrest; (587) Radio: AM/FM Stereo w/Digital Clock: Includes 2-speakers; Upfitter Switches (4) Powertrain Engine: 6.4L OHV Power Stroke Diesel V8 2B 8/16/2010 MTB#07-26
  • 3. 135 Amp Heavy Duty Alternator; Dual 78 AH Batteries. Torque: 600 ft. lbs. @ 2000 rpm COMPLY Transmission: TorqShift 5-Speed YES / NO Auto w/OD (Diesel) Includes tow/haul mode. ____ /____ Limited Slip w/4.88 Axle Ratio GVWR: 19,000 lbs. Wheels & Tires Tires: LT225/70Rx19.5G BSW Max Traction Includes 4 traction tires on the rear and 2 traction tires on the front. ____ /____ (2) SPARE MAX TRACTION TIRES MOUNTED ON (2) RIMS ____ /____ Wheels: 19.5” Argent Painted Steel (8) (61J) 6-Ton Hydraulic Jack. Excludes carrier. Required in Rhode Island. Seats & Seat Trim A HD Vinyl Full Bench Seat w/Recline Includes integrated armrest and cupholders located in armrest. Other Options PAINT Monotone Paint Application 165” Wheelbase/84” Cab to Axle 6-Ton Hydraulic Jack Extra Heavy Duty 200-Amp Alternator Engine Block Heater Standard in Alaska, Colorado, Idaho, Maine, Minnesota, Montana, North Dakota, South Dakota, Wisconsin and Wyoming. TowCommand Integrated Trailer Brake Controller Trailer brake controller verified to be compatible with electronic- actuated brakes only. 3B 8/16/2010 MTB#07-26
  • 4. Black Molded Cab Steps Manual Air Conditioning Radio: AM/FM Stereo w/Digital Clock Includes 2 speakers Payload Upgrade Package (NONGV) GVWR: 19,000 lbs. Includes upgraded frame. See Order Guide Supplemental reference for further details on GVWR. Snow Plow Prep Package (67D) Extra Heavy Duty 200-Amp Alternator. Includes unique fan clutch and pre-selected springs (See Order Guide Supplemental Reference for springs/FGAWR of specific vehicle configurations). Restrictions apply; see Supplemental Reference or Body Builders Layout Book for details. Also allows for the attachment of a winch. COMPLY YES / NO ____ /____ TowCommand System (52B) TowCommand Integrated Trailer Brake Controller: Trailer brake controller verified to be compatible with electronic-actuated brakes only. Includes trailer tow mirrors and trailer wiring – 7- wire harness with relays, blunt out and labeled. NOTE: Integrated Trailer Brake Controller (52B) has only been verified to be compatible with trailers having electric-actuated drum brakes (1 to 4 axles) and not hydraulic surge or electric-over-hydraulic types. Ambulance Prep Package Not Included ____ /____ Interior Colors For: Primary w/XL Medium Stone ____ /____ Primary Colors For: Primary w/XL Forest Green Clearcoat Metallic TWO WAY RADIO MOTOROLA CDM 1250 WITH TRA 4506 BLACK ANTENNA OR EQUAL SPECIFICATIONS MODEL 132D54V OMAHA STANDARD DUAL WHEEL UTILITY BODY OR EQUAL NOTE: ALL DIMENSIONS ARE MINIMUM 1) DIMENSIONS: 4B 8/16/2010 MTB#07-26
  • 5. A. LENGTH: 132” B. WIDTH: 95-3/4” C. HEIGHT: 40” D. COMPARTMENT DEPTH: 20” E. LOAD SPACE: 132” X 54-1/2” F. CAB TO AXLE: 84” G. CURBSIDE COMPARTMENTS: 1) FRONT 33 X 60 X 20 2) INTERMEDIATE 24 X 40 X 20 3) HORIZONTAL 46 X 19 X 20 4) REAR 29 X 40 X 20 H. STREETSIDE COMPARTMENTS: 1) FRONT 33 X 40 X 20 2) INTERMEDIATE 24 X 40 X 20 3) HORIZONTAL 46 X 19 X 20 4) REAR 29 X 40 X 20 MAKE:_______________MODEL: COMPLY:________EXCEPTIONS: 2) UNDER STRUCTURE: A. FRONT AND REAR CROSS MEMBERS-7 GA. FORMED STEEL CHANNEL. ADDITIONAL REINFORCEMENT IS INCORPORATED IN THE FRONT CROSS MEMBER AT THE UNIVERSAL MOUNTING POINTS TO THE CHASSIS FRAME. B. INTERMEDIATE CROSS MEMBERS-7 GA. FORMED STEEL CHANNEL WITH TWO EXTENSIONS WHICH REST ON THE TRUCK FRAME RAILS. C. LONGITUDINAL STIFFENERS- FOUR (4) FULL LENGTH 14 GA. FORMED STEEL CHANNEL LONGITUDINAL MEMBERS, INTERLACED WITH CROSS MEMBERS. D. FLOOR- 1/8” SAFETY TREADPLATE STEEL. COMPLY:________EXCEPTIONS: 3) COMPARTMENT CONSTRUCTION: ALL A-40 TWO SIDED GALVANNEALED STEEL A. FRONT AND REAR END PANWELS – 14 GA. GALVANNEALED STEEL. B. BOTTOM PANELS – 14 GA. GALVANNEALED STEEL. C. TOP PANEL - 14 GA. GALVANNEALED STEEL. D. INTERMEDIATE PANELS –14 GA. GALVANNEALED STEEL. E. FENDER PANEL – 14 GA. GALVANNEALED STEEL WITH DIE FORMED WHEEL ARCH SECTION. F. RUBRAIL - 14 GA. GALVANNEALED STEEL. OUTSIDE EDGE OF RUBRAIL HAS 3/8” HEM FOR ADDITIONAL STRENGTH. COMPLY:________EXCEPTIONS: 4) DOOR CONSTRUCTION: A. DOUBLE PANEL CONSTRUCTION OF 20 GA. GALVANNEALED STEEL WITH AN INTERIOR STEEL “C” CHANNEL STIFFENER BONDED BETWEEN THE INNER AND OUTER PANELS OF THE SERVICE BODY DOORS WITH STRUCTURAL ADHESIVE. 5B 8/16/2010 MTB#07-26
  • 6. NOTE: NO EXCEPTIONS B. LATCHES – ALL STAINLESS STEEL T-HANDLE TWIST TYPE TAMPER PROOF LOCKS; FULLY WEATHER PROOF SEALED STAINLESS STEEL HOUSING, BOLTED TO DOOR FOR EASE OF REPLACEMENT. ALL DOORS TO BE KEYED ALIKE. C. STRIKER PIN – STAINLESS STEEL PIN, ADJUSTABLE AND LOCATED INSIDE THE PRIMARY SEAL. MOUNTED ON 10 GA. ADJUSTABLE SLOTTED BRACKET. D. HINGE – FULL LENGTH ALL STAINLESS STEEL HINGE WITH CONCEALED HINGE LEAVES AND ¼” STAINLESS STEEL ROD. BOLTED TO DOOR FRAME FOR SECURITY AND EASE FO REPLACEMENT. E. DOOR SEAL – FULL PERIMETER AUTOMOTIVE NEOPRENE BULB SEAL WITH 3M ADHESIVE BACKING. SEAL HAS CONTINUOUS CONTACT WITH DOOR. F. DOOR HOLDER – HEAVY DUTY CABLE. STANDARD ON HORIZONTAL COMPARTMENTS, ALL VERTICAL COMPARTMENTS TO HAVE SPRING LOADED TWO WAY ADJUSTABLE DOOR STAY. COMPLY:________EXCEPTIONS: 5) COMPARTMENTS TRAYS & SHELVES: A. STREETSIDE FRONT COMPARTMENT HAS SET OF FIVE NESTED SLIDE OUT TRAYS. EACH TRAY IS 17” DEEP X 38” WIDE X 3” HIGH WITH DIVIDERSA. TRAYS ARE 150 LB CAPACITY AND HAVE AUTOMATIC LOCK-IN LATCH SYSTEM. B. ONE (1) HORIZONTAL COMPARTMENT DIVIDER TRAY. TRAY IS 16 GA. GALVANIZED STEEL, 2” LIP FRONT AND REAR WITH DIVIDER SLOTS ON 2” CENTERS. HORIZONTAL COMPARTMENT TRAY IS ADJUSTABLE VIA CLIPS VARIABLE ON 4” CENTERS. C. TWO (2) REAR COMPARTMENT SHELVES. SHELVES ARE 16 GA. GALVANIZED STEEL, 1” LIP ON ONE SIDE WITH LIP FLANGED OPPOSITE ON OTHER SIDE SO SHELF CAN BE INSTALLED WITH FRONT LIP EITHER UP OR DOWN. REAR VERTICAL COMPARTMENT SHELVES ARE ADJUSTABLE VIA CLIPS VARIABLE ON 4” CENTERS. COMPLY:________EXCEPTIONS: 6) FRONT BULKHEAD: 14 GA. GALVANNEALED STEEL. FORMED TOP RAIL WITH TWO DIE FORMED REINFORCEMENT RIBS. FLOOR DRAINAGE IS DESIGNED INTO LOWER RIB AT FLOOR LEVEL. COMPLY:________EXCEPTIONS: 7) PAINT: 6B 8/16/2010 MTB#07-26
  • 7. A. THE ENTIRE UNDERSIDE AND DOOR INTERIORS ARE TO BE COVERED WITH AUTOMOTIVE TYPE UNDERCOATING. B. ALL PRODUCT GOES THROUGH A MULTI-STAGE IMMERSION CLEANING AND RINSING PROCESS TO THOROUGHLY CLEAN ALL SURFACES. THE BODY IS THEN IMMERSED IN A CHEMICAL BATH TO PREP THE STEEL FOR OPTIMUM ZINC PHOSPHATE ADHESION PRIOR TO IMMERSION IN THE ZINC PHOSPHATE TANK. THE ZINC PHOSPHATE STAGE PUTS A BASE ZINC CRYSTALLINE STRUCTURE ON THE STEEL FOR SUPERIOR PAINT ADHESION. A SUBSEQUENT SEALER RINSE TANK SEALS THE PRETREATED SURFACE TO OPTIMIZE CORROSION RESISTANCE. TWO REVERSE OSMOSIS RINSE TANKS INSURE THAT THE PRODUCT IS FREE FROMO MINERAL DEPOSITS PRIOR TO PAINTING. THE BODY IS THEN IMMERSED IN AN EPOXY ELECTRO-DEPOSITION TANK WHERE THE GRAY EPOXY PRIME PAINT IS CHARGED ONTO THE BODY.L AFTER TWO FINAL PERMEATE RINSE TANKS REMOVE ANY EXCESS EPOXY MATERIAL AND INSURE A CONSISTENT SURFACE FINISH, THE BODY IS OVEN CURED AT 350 DEGREES FOR 40 MINUTES TO FULLY CROSSLINK AND CURE THE ELECTROCOAT PRIMER PROVIDING AN EXTREMELY DURABLE AND RUST RESISTANT FINISH. C. EXTERIOR OF BODY – SHERWIN WILLIAMS ACRYLIC ENAMEL GREEN TO MATCH CAB OR EQUAL. COMPLY:________EXCEPTIONS: 8) LIGHTING: A. TO MEET ALL FMVSS 108 STANDARDS B. RECESSED STOP, TAIL, BACKUP LIGHTS (ALL LIGHTS TO BE LED) C. COMPLETE WIRING HARNESS WITH CHASSIS COONNECTOR D. LICENSE PLATE BRACKET WITH LIGHT’ E. ELECTRIC BRAKE CONTROL WITH COLE HERSEE 12063 TRAILER LIGHT PLUG F. RECEIVER TUBE WITH 8 TON COMBO HITCH WITH 2” BALL AND “D” RINGS G. TWO (2) KWIK-RAZE TELESCOPING WORK LIGHTS THAT CAN BE MOVED UP AND DOWN AND SWIVEL 360 DEGREES, TOP-RAISING 48” TELESCOPING ANODIZED ALUMINUM POLE WITH 320 GRIT SPIRAL BRIGHT-DIPPED FINISH, MOUNTING BRACKET, 2” BASE WITH LOCKING KNOB WITH WALLED 1” OD TELSCOPING POLE. LIGHT ON POLE ONE 7” ROUND COLLINS MODEL FX-9 LIGHT 500,000 CANDLE POWERSPOT/FLOOD, 500,000 PEAK CANDLE POWER IN SPOT MODE, 50,000 CANDLE POWER IN FLOOD MODE MOUNTED FRONT OF SERVICE BODY, ONE EACH SIDE WITH SWITCH IN CAB. COMPLY:_______EXCEPTIONS: 9) BUMPER: A. GS96 GRIP STRUT BUMPER – 12 GA A-40 GALVANNEALED STEEL RECESSED IN CENTER. NOTE: MILD STEEL TREADPLATE BUMPER IS NOT ACCEPTABLE COMPLY:________EXCEPTIONS: 7B 8/16/2010 MTB#07-26
  • 8. 9) ADDITIONAL EQUIPMENT: A. MASTER LOCKING OF ALL COMPONENTS WITH INTERNAL LOCK SYSTEM FROM REAR. B. VENT IN RIGHT FRONT COMPARTMENT. C. CURBSIDE REAR COMPARTMENT TO HAVE CRANE REINFORCEMENT PACKAGE INSTALLED FOR 4,000 LB. CAPACITY CRANE. D. ADDITIONAL LEAF SPRING ON RIGHT SIDE REAR. E. BACK UP ALARM – ECCO 510 OR APPROVED EQUAL. F. TWO (2) LED STROBE LIGHTS WITH RUBBER GROMMETS TO BE MOUNTED IN REAR BODY PANEL, (ONE ON EACH SIDE OF TRUCK). ALL LIGHTS TO BE WIRED TO LIGHTED SWITCH IN CAB. G. ALUMINUM DIAMOND PLATE ROCK GUARDS FOR FRONT. H. 12 GUAGE STEEL TREADPLATE ON COMPARTMENT BACKS AND ON THE INSIDE OF THE TAILGATE IN THE COMPARTMENT AREA. I. LIGHTS IN ALL COMPARTMENTS OF SERVICE BODY WITH TELLTALE SWITCH IN CAB. J. WILTON COMBINATION BENCH VISE INSTALLED ON REAR BUMPER IN REINFORCED RECEIVER TUBE. K. WHELEN LIBERTY LED WITH PERMANENT ROOF MOUNTED LIGHTBAR. AMBER FRONT WITH SWITCH, AMBER REAR WITH SWITCH, FRONT TAKE DOWN LIGHTS WITH SWITCH, ALLEY LIGHTS WITH SWITCH EACH SIDE. SIX (6) LED TRAFFIC ADVISOR. SIX (6) CONTROL BOX MOUNTED IN CAB. FOUR (4) ADDITIONAL LINEAR FRONT LEDS. L. INGERSOL RAND MODEL 24750F13GH WITH 100% CAST IRON DESIGN OR EQUAL. 175 PSI TWO STAGE TYPE-30 13.5 HP FINNED COPPER INTERCOOLED WITH REMOVABLE CYLINDERS FOR SIMPLE MAINTENANCE, SPLASH LUBRICATION DESIGN CORROSIVE RESISTANT POWDER COAT PAINT FINISH, 30 GAL ASME TANK WITH MANUAL DRAIN, WITH 13.5 HP HONDA ENGINE WITH FUEL EFFICIENT IDLE ENGINE CONTROL AND ELECTRONIC IGNITION WITH ELECTRIC START HOOKED UP TO TRUCK BATTERY. TO INCLUDE 50 FT. OF AIR LINE AND HOSE REEL MOUNTED OVER WELDING UNIT IN LOAD SPACE. M. MILLER BOB CAT 225 WELDER ON A 22 HP GASOLINE ENGINE OR EQUAL. 12 GALLON SMART FUEL TANK. ENCLOSED ENGINE AND SWITCHES. IRON AND COPPER ALTERNATOR/GENERATOR. HIGH IMPACT PROTECTIVE ARMOUR WITH RECEPTACLE AND OUTPUT STUD COVERS. METER MAINTENANCE DISPLAYS WITH HOUR METER FUNCTION AND OIL CHANGE INTERVAL. TWO (2) AWG 1 X 50 FT. CABLE. TWO (2) LUGS, ONE (1) TWECO 250 AMP ELECTRODE HOLDER, ONE (1) 300 AMP GROUND CLAMP MOUNTED IN SERVICE BODY LOAD SPACE. WELDER IS TO BE PROTECTED BY A REMOVABLE STEEL TUBE GUARD 24”, AND MOUNTED IN THE LOAD AREA. N. CUSTOM FABRICATED TRANSFER TANK 52”L X 28”H X 12”W WITH FILL-RITE MODEL1210B 12 VOLT 14 GPM PUMP, 50 FT. OF HOSE WITH NOZZLE. O. MOTOROLA CDM TWO WAY RADIO WITH TRA4506 BLACK ANTENNA OR EQUAL MOUNTED IN CAB. LOCATION TO BE DETERMINED BY USING AGENCY P. WARRANTY: 6 YEARS ON RUST THRU PROTECTION, HINGES AND LOCKS. COMPLY:________EXCEPTIONS: 8B 8/16/2010 MTB#07-26
  • 9. VENDOR TO ANSWER ALL COMPLIANCE QUESTIONS, LIST ALL EXCEPTIONS IN DETAIL, AND RETURN WITH THE BID. COMPLY YES / NO ____ /____ ____ /____ ____ /____ ____ /____ SPECIFICATIONS FOR CRANE LIFTMOORE CRANE MODEL 4000X-16 OR EQUAL MOUNTED ON COMPARTMENT TOP AT RIGHT SIDE REAR OF SERVICE BODY. POWER HOIST, POWER BOOM ELEVATION, POWER ROTATION AND POWER BOOM EXTENSION FROM 8 FT. TO 12 FT., WITH A MANUAL PULL OUT TO 16 FT. CAPACITY: 16,000 FT. – LB. WITH CAPACITIES AS FOLLOWS: 4,000 LBS ____ /____ @ 4 FT. 2,666 LBS @ 6 FT. 2,000 LBS @ 8 FT. 1,600 LBS @ 10 FT. 1,333 LBS ____ /____ @ 12 FT. 1,142 LBS @ 14 FT. 1,000 LBS @ 16 FT. HOIST WINCH: 9B 8/16/2010 MTB#07-26 ____ /____
  • 10. THE HOIST WINCH HAS A PLANETARY GEAR DRIVE FOR BEST POSSIBLE EFFICIENCY. A 1.8 HP PERMANENT MAGNETIC MOTOR POWERS THE WINCH. THE SINGLE LINE CAPACITY OF THE WINCH IS 1,600 LBS. THE WINCH LOAD IS CONTROLLED BY A DYNAMIC BRAKING SYSTEM ON THE MOTOR AND BY A LOAD APPORTIONED MECHANICAL BRAKE LOCATED IN THE WINCH DRUM. RATIO BETWEEN WINCH DRUM AND WIRE ROPE MEETS ANSI REQUIREMENTS. WINCH PERFORMANCE IS AS FOLLOWS: LOAD (LBS) HOOK SPEED (FT/MIN) AMP DRAW 1000 14.575 2000 7.2 80 4000 4.5 95 COMPLY WIRE ROPE AND SHEAVES: THE CRANE IS TO BE SUPPLIED WITH 85 FT. OF ¼ IN. GALVANIZED YES / NO AIR CRAFT CABLE. THE MINIMUM BREAKING STRENGTH OF THE ROPE IS 7000 LBS. THE WIRE ROPE IS TO BE LOCATED OUTSIDE ____ /____ OF THE BOOM AND VISIBLE FOR OPERATORS CONTINUAL INSPECTION. A TRAVELING BLOCK FOR EAST TWO AND THREE PART HOOK UP IS INCLUDED. ALL SHEAVES ARE TO MEET ANSI REQUIREMENTS. ____ /____ HYDRAULIC SYSTEM: THE HYDRAULIC PUMP IS DRIVEN BY A 12 VOLT DC SERIES WOUND ELECTRIC MOTOR. A GEAR TYPE PUMP WITH 1.2 GPM CAPACITY AT 500 PSI. HYDRAULIC FUNCTIONS ARE CONTROLLED THRU FOUR WAY SPRING CENTERED SOLENOID ACTIVATED VALVES. THE VALVES ACTUATE AT A MINIMUM OF 10 VOLTS, HAVE MANUAL OVER-RIDE CAPABILITIES AND ARE MOUNTED ON A MANIFOLD FOR EASY ACCESS. THE RESEVOIR ____ /____ CAPACITY IS 1 GALLON. THE RELIEF VALVE ON THE PUMP IS SET FOR 1800 PSI. ROTATION SYSTEM: THE HYDRAULIC POWERED ROTATION IS DRIVEN BY A LOW SPEED, HIGH TORQUE HYDRAULIC MOTOR AND DRIVES THRU A 54:1 RATIO SELF LOCKING WORM GEAR . THE WORM GEAR IS AN ALUMINUM BRONZE ALLOY. THE WORM IS HARDENED STEEL. THE CRANE ROTATES 360 DEGREES CONTINUOUSLY WITHOUT LIMIT IN TWO 4.00 IN. TAPERED ROLLER BEARINGS. BOOM ELEVATION: ____ /____ THE BOOM IS CAPABLE OF MOVING FROM -5 DEGREES TO +75 DEGREES. IT IS ELVATED BY A 3.5 IN. BORE DOUBLE ACTING CYLINDER. THE CYLINDER HAS AN INTEGRAL COUNTERBALANCE VALVE WITH RELIEF SET AT 2000 PSI. THE COUNTERBALANCE VALVE HAS TWO VITAL PURPOSES. IT WILL HOLD THE CYLINDER IN THE EVENT OF HOSE FAILURE, AND IT ____ /____ CONTROLS THE RATE OF BOOM DECENT. BOOM EXTENSION: THE BOOM EXTENDS UNDER POWER FROM 8 FT. TO 12 FT. TO 16 FT. BY A 2.5 IN. BORE HYDRAULIC CYLINDER. THE CYLINDER IS ____ /____ MOUNTED INSIDE THE BOOM FOR PROTECTION. THE CYLINDER HAS A COUNTERBALANCE VALVE INTEGRALLY MOUNTED WITH RELIEF SET AT 2000 PSI. THE COUNTERBALANCE WILL HOLD THE 10B 8/16/2010 MTB#07-26 ____ /____
  • 11. CYLINDER IN THE EVENT OF HOSE FAILURE, AND CONTROLS THE RATE OF CYLINDER RETRACTION. THE BOOM HAS A MANUAL TELESCOPING SECTION THAT CAN BE EXTENDED FROM 12 FT. TO 16 FT. WITH ONE INTERMEDIATE POSITION AT 14 FT. THE POWER EXTENDABLE SECTION MOVES ON NYLATRON SLIDE PADS. LOAD SENSOR: A LOAD LIMITING SENSOR IS INSTALLED IN THE ELEVATION CYLINDER. THIS SENSOR WILL SHUT DOWN, HOIST UP, BOOM OUT, AND BOOM DOWN WHEN AN OVERLOAD IS DETECTED. THE SENSOR WILL RESET AFTER THE LOAD IS LOWERED. ANTI TWO-BLOCK: AN ANTI TWO-BLOCK SYSTEM IS TO BE INCLUDED WITH THE CRANE. THE ANTI TWO- BLOCK IS TO PREVENT THE BOOM AGAINST THE TRAVELING BLOCK AND BREAKING THE CABLE. PENDANT CONTROL: A 20 FT. REMOTE PENDANT CONTROL IS TO BE SUPPLIED WITH THE CRANE. FOR SAFEST POSSIBLE USE, THE PENDANT CONTROL OS REMOVABLE, AND EACH FUNCTION IS CONTROLLED BY A MOMENTARY CONTACT TOGGLE SWITCH. OUTRIGGERS: THE CRANE IS TO BE EQUIPPED WITH A MANUAL OUTRIGGER ASSEMBLY. EXCEPTIONS:___________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ 11B 8/16/2010 MTB#07-26