For such type of wire jewelry making tutorials, I tried to combine the beads and chain in a piece using some actually easy but distinctive methods, for instance, the braided chain bracelet here!
Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
Wire jewelry making tutorials distinctive braided chain bracelet
1. Wire Jewelry Making Tutorials - Distinctive Braided
Chain Bracelet
For most crafter, including somewhat novices or even
skillful masters, simplicity is always the key issue that
is well concerned. For today’s wire jewelry making
tutorials, I just create such a straightforward and
basic braided chain bracelet. All supplies needed are
available in craft stores and priced reasonably.
6mm Acrylic Bicone Bead
Chain
Toggle and T-bar clasp
0.3mm Brass Wire
Side Cutting Plier
Flat Nose Plier
: Measure the needed chain part around yourStep1
wrist. The length of bracelet equals the wrist
circumference minus the length of clasp.
For such type of wire jewelry making tutorials, I tried to combine the beads and chain in a piece using some
actually easy but distinctive methods, for instance, the braided chain bracelet here!
Supplies for a braided chain bracelet:
Details for the wire jewelry making tutorials:
: Take a long brass wire strand. StartStep2
with wrapping the T-bar to the first link of chain.
Firstly, weave the wire through the loop of T-bar
and chain for several times; later, wrap the short
end around the blank wire neck.
: Here you may add on the beadsStep3
now. Wrap the wire around the link 3 or 4
times. Slide on one 6mm bicone bead and the
wrap the top of next chain link.
2. Congratulations!
As you seen in the braided chain bracelet, lightweight
acrylic beads and chain are actually popular now and
has been widely adopted in a large amount of wire
jewelry making tutorials for beginners. What’s more
about the advantage is that such bracelets can be
stacked with any other items to create impact! So,
just enjoy it!
For more creative and lovely bracelet making ideas please click:
http://www.pandahall.com/learning-center/Bracelets/grid-8-p1.html
: Repeat the same process for wholeStep4
chain strip.
: Attach on the toggle as starting andStep5
cut off the excess.