Before learning this jewelry making tutorial, the main materials need to be prepared. In this case you will need red aluminum wire and copper wire. Roll up your sleeves to create this personalized charm necklace with us!

1. Learning Jewelry Making- Create Personalized
Charm Necklaces with Red Copper Wire
If you have coils of red wire that are left at the bottom of
your supplies box, what crafts could you possibly make
with them? This tutorial is super appropriate for you if
you don’t know! We’ll show you how to create a
personalized charm necklace with wire wrapping
techniques. Start learning jewelry making now!
Materials and tools:
 1.5mm red aluminum wire
 0.5mm red copper wire
 0.5mm chocolate copper wire
 Silvery iron chain
 Round nose pliers
 Flat nose pliers
 Wire cutters
Step 1: make an oval loop
1st
, snip a piece of aluminum wire that measures
about 20cm;
2nd
, cross both ends to shape an oval pattern;
3rd
, bend both ends at the junction point, bring
them into parallel straight lines;
4th
, squeeze them together with plier;
5th
, coil with red copper wire from the junction
point;
6th
, after coiling, loop the rest of the wire with
round nose pliers;
7th
, cut off excess wire and close the loop.
Before learning this jewelry making tutorial, the main materials need to be prepared. In this case you will
need red aluminum wire and copper wire. Roll up your sleeves to create this personalized charm necklace
with us!
Instructions:

2. The finished loop is like this:
Step 2: finish the oval pendant
1st
, pick a piece of aluminum wire, around which you
will coil the red copper wire;
2nd
, when the coiling reaches 12cm, remove it off the
aluminum wire and cut off the extra red copper wire;
3rd
, pick a piece of 20cm brown copper wire and coil it
around the oval loop;
4th
, after 8 times of coiling, thread red copper coil onto
brown wire and continue wrapping around oval loop;
5th
, coil the brown wire on the aluminum wire to secure in place.
Step 3: attach pendant to chain
Tada! The personalized charm necklace tutorial is over. Everyone has unpredictable possibilities in
becoming a great jewelry designer while devoting time and energy into learning jewelry making.
Never look down upon yourself; you can accomplish anything you set your mind to!
Shop for jewelry tools in your handcraft projects, welcome to visit our webpage at:
http://www.pandahall.com/beads/wholesale-Jewelry-Tools/0-109-1.html
Snip a piece of chain that measures about 30cm,
thread it through the loop of the pendant, and
combine end links with a jump ring.
The final look is like this: