PAYING
EXCESSIVE
ELECTRIC
BILLS
Put the brakes on
Rising Electric Costs

Think!
“The new name in Energy Savings”

KVAR Energy Controller (KEC)
“The Amazing Electrical Energy Saver”
For Commercial and Residential Applications
What is a KVAR
Energy Controller?
KVAR is an Energy Savings Device:
•Capable of fine-tuning the electrical motors and system in
Industries, Homes and Offices.
•This fine-tuning reduces heat generation
•Our Reduction in Amperage will result in a reduced consumption of
electricity (Kilowatt / Hour)
•Optimizes the Power Factor of the individual load to unity.

Industrial/Commercial KVAR KEC
Silent Features
of KVAR KEC:
• Saves @15% of Energy on Induction Motors
• Reduces/Heat and Vibration of Motors
• Reduces Power Surge of Motors
• Protect Motors from Voltage Fluctuation
• Increases Motor Working Performance
• Legally Slows Power Meter

KVAR KEC – Power to Save Money
•Reduces monthly Electric Bill Guaranteed for 6% MINIMUM
Return on Investment is rapid
•KVAR KEC increases the life of you motor by 85%
Saves extra expenditure
•KVAR KEC reduces machinery down time
Less downtime for industrial production due to increased
service life of all motors within the KVAR system
•Due to the reduced electric costs, the production
costs of the commodity also will decrease

KVAR KEC Saves National Resources:
•By using KVAR KEC in motors can lower the demand of
electricity by 15% at national level. As such power production
may reduce to 15% from present level
•If KVAR KEC is used by masses, then fuel cost will be reduced
due to lesser power generation. At present rate, the money
saved from fuel may be US $275 million
•By using KVAR KEC, the over load situation of the whole
system may be reduced
KVAR KEC Improves Environment:
•KVAR KEC improves the environment due to reduced emission of
thousands of tons of harmful gases through less burning of gas and
diesel in the power plant.
•Improves working condition of the employees in the industries due to
reduced noise and vibration of machinery.

KVAR Commercial Energy Controllers
also increases your efficiency of:
• Power plants
• Generators
• Transmission
• Distribution line capacity

How Does KVAR KEC Work?
The working technology applied by the KVAR Energy Controller will
1) Reclaim 2) Store & 3) Supply power to inductive motors and loads.
All induction loads consumes two kinds of power:
1. Reactive Power (Develops Magnetic Fields)
2. Working Power (Active Power)
While Active Power performs the useful work, Reactive Power’s only
function is to develop magnetic fields around a motor’s induction winding.
A KVAR KEC Unit works on Power Factor Optimizing Technology
KVAR reduces the Reactive load without affecting the Electro-Magnetic Field. The
power reclaimed, stored and recycled by the KVAR Energy Controller would normally be
pushed back through the Power Distribution line. With a KVAR Energy Controller in the
system, Reactive Power is provided locally.

The KVAR Advantages
• Motors run at significantly cooler operating temperatures
• KVAR increases the working lifetime of inductive
motors by up to 85%
• Motors end up operating much more efficiently
• Power Bills Drop as energy consumption decreases
HOW?
•KVAR Energy Controllers store the Reactive Power needed for the
creation of Electro-Magnetic Fields within the inductive load.
•As the motor operates, this Reactive Power is pulled and pushed
to and from the KVAR KEC Unit by the motor.

Investment Payback Period
Guaranteed Payback with 36 months
depending upon the size, condition and
running hours of the motor.
Patented Proven Department of Energy
Studied Product
Holds 15 patents including :
U.S. Patent #5,440,442

SPECIFICATIONS:
Energy Saving Range: 6% up to 25%, depending upon the size of the
motor, run time and efficiency.
Legal Information:
Underwriters Laboratory Inc.
listed (UL28EP).
Canadian Standards Association
listed (LR78409-1)
U.S. Department of Energy Study
(Sept. 1980 DOE/TIC 11339, Category
UC38)

Applications:
(Applicable to almost all kinds of fixed speed AC Induction Motors)
Single Phase: Model US1 (31 Combinations). From Fractional HP up to 5 HP
Single Phase: Residential up to 200 Amps Service
Three Phase: Model US2 (31 Combinations). Fractional HP up to 65 HP
Three Phase: Model US3- From 65 HP up to 300 HP
• Combination of US2 & US3 for up to 600 HP
• Combination of US2 & US3/US2 fro up to 850 HP
• Survey and Sizing is required for three phase Application
• Grades: Industrial, Commercial & Residential
Operating Life: It is warranted for five (5) full years against workmanship or
any defects and has a life expectancy of twenty-five (25) years.
“A KVAR KEC Installation will make your Company a friend of the
environment and a savior of our natural resources.”

Electrical Characteristics:
a. Phase: Single Phase/3-Phase
b. Voltage Range: 220V up to 600 Volts AC Application
c. Hertz: 50/60 Hz systems
d. Electrical Amperage Rating per Phase:
i. 114A maximum on 3-Phase, for US3 Models
ii. 76A max on 3-phase, for US2 Models
iii. 7A max on single Phase, for US1 Models
e. Surge Protection: Withstand Surges to 480 VAC.
Better Voltage Regulation
f. Technology: Figured out self-healing metalized
Capacitor-type invention
g. Self Consumption: Low Losses, 0.5 Watt/Kvar
h. Interrupter: Maximum 10,000 Amps fault currents
i. UL Recognized Pressure Sensitive Interrupter
j. Discharge System: To reduce voltage to 50 Volts or less
within 5 minute of de-energization
k. Operating Temperature Range: -40 C to +90 C
l. Wire Rating: 600 Volts
m. Withstanding Capability: Without breakdown 40-70 Hz,
1000V plus twice the maximum rated voltage

Physical Characteristics
a. Flash Point: +182 C to 200 C
b. Casing: Hermetically sealed aluminum case
with turn plate steel cover
c. Insulation: Phenolic insulation bushings
d. Size: 6” x 6” x 4” up to 12” x 12”
e. General Exposure: NEMA 3R Indoor/Outdoor
f. Resistant: THHN, MTW, THWW or AWM.
Gasoline & Oil Resistant II
g. Component Liquid: Bio safe

Installation Flexibility:
One KVAR KEC unit should be installed to each inductive load. A single KVAR KEC unit
can be prescribed for multiple loads in one panel, provided that all motors of the panel
run together with KVAR KEC installed.
• Maintenance: Free maintenance – Fit & Forget Technology
• Environment Protection: Environment friendly.
• County of Origin: United States of America
• Product Warranty: 5 Year Factory Warranty form the date of installation
•KVAR KEC Power Factor Optimizer and our trademarks are registered
with the United States Government
Put the Brakes on Rising Electric Costs
“Use KVAR KEC & Contribute to the Economic Development of the Country”

Product Recognition:
Recognized by World Leading Energy Conservation Organizations:
NASA
TESTED
Fields of Uses of the KVAR KEC
•Air Conditioning Plants & AHU •Escalator/Conveyer/Lift
•Cold Storage •Circular Saw Mills
•Ice Factory •Textile Mills
•Cement Factory •Mixer, Blender, Granular
•Water Pumps •Super Markets
•Injection Molding Machine •Airports
•Garment Machinery •Hotels & Restaurants
•Flour & Rice Mills •Hospitals
•Compressor •Defense Departments
•Steel Re-Rolling Mills •Residential & Apartments
“Use KVAR KEC and SAVE MILLIONS of DOLLARS per YEAR

Save Energy
Save Industry
Save Environment
Save Natural Resources
Save Power Demand
Use KVAR Energy Savers

Authorized Commercial Distributor
for KVAR Energy Controllers