Ceramic based heat reflecting coat
Product introduction
Liquid ceramic-based thermal insulation coatingLiquid ceramic-based thermal insulation coating
The Thermo-S nano insulatio...
Thermo-S technical information
Thermo-S, UniPress, Front, FrontPress, Metal, MetalPress,
Eco – liquid ceramic-based insula...
Water absorption after 24 hours,
on the surface: 0,03 g/cm3
Usability temperature: from -60°C to +180°C
Drying time at 20 ...
•Thermal insulation of interior walls
•Elimination of thermal bridges
•Thermal insulation of exterior walls
•Facade insula...
The EMI conducted Bacteria and Fungi inquiry on the Thermo-S product in
accordance with EN ISO 846:1999 standard.
The mold...
The coating of the walls kills
the mold and improves the
moisture control.
Reduction of allergies and
asthma by terminatio...
Thermo-S FrontPressThermo-S FrontPress
Applied with Airless spray
paint gun
Thermo-S FrontThermo-S Front
Applied with iron...
Thermo-S FrontPressThermo-S FrontPress
Applied with Airless spray
paint gun
Microscopic examination(400X)Microscopic exami...
Competing productsCompeting products
Microscopic examination(400X)Microscopic examination(400X)
competitor's product 2 com...
Thermo-S performaceThermo-S performace
Image captured with an thermal imaging camera.Image captured with an thermal imagin...
Thermo-S performaceThermo-S performace
Thermal imaging capture presented on a graph.Thermal imaging capture presented on a...
Thermo-S advantages over the competition:
The product is made in the European Union (CE)
The product meets A2-s1, d0 fire ...
Thermo-S advantages over the competition:
Due to to the high resistance to pressure the Press product line can be applied ...
Thermo-S advantages compared to conventional insulation technology:
Simpler application technology compared to traditional...
Thermo-S product family
Thermo-S Basic – Primer for walls:
A primer specifically developed for Mahlmart products. Its usag...
Thermo-S product family
Thermo-S Uni, UniPress – Indoor surfaces:
Due to its material structure and ingredients it is prim...
Thermo-S product family
Thermo-S Metal, MetalPress – Metal surfaces:
The special binder material makes it ideal for indoor...
Thermo-S with iron filler or roller
Suggested airless sprayer MARK V from GRACO
Thermo-S Front – house insulation, coloring - Debrecen
Thermo-S Front – house insulation, coloring - Debrecen
Thermo-S Uni – house insulation, - Budapest
Thermo-S Uni – house insulation, - Budapest
Thermo-S Front – Historical insulation, -
Budapest Buda Castle
Thermo-S Front – SáriSáp
* At our Kiskunhalas site on the customer's request
choice of pastel color is recommended in order to keep the heat reflec...
We are proud of that after three years of research and
development the result of our work is a product range that
compares...
Upcoming SlideShare
Loading in...5
×

Thermo S

518

Published on

Published in: Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
518
On Slideshare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
11
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Thermo S

  1. 1. Ceramic based heat reflecting coat Product introduction
  2. 2. Liquid ceramic-based thermal insulation coatingLiquid ceramic-based thermal insulation coating The Thermo-S nano insulation coating significantly outperforms the thermal conductivity and heat transfer properties of the known conventional insulation materials and therefore its use provides a professional and innovative solution for a wide range of situations. Through the Hungarian developed and manufactured Thermo-S product line Hungarowatt Ltd. would like to contribute to the conservation of our natural resources and to the sustainable development of humanity. Our aim is to rationalize energy consumption and to provide the opportunity to live in a healthier environment.
  3. 3. Thermo-S technical information Thermo-S, UniPress, Front, FrontPress, Metal, MetalPress, Eco – liquid ceramic-based insulation coating Appearance, Color: White, viscous coating Viscosity: thick, viscous Suspension density: 500-550 kg / m3 Hardened material density: 290- 319 kg / m3 Base: Water Colorability: Water-based colourants, up to a maximum of 0.5% Dilution: with water, up to a maximum of 3% Fire protection class : A2 -s1, d0 pH: 8,5-9,5 Thermal conductivity (20 °C-on), λ: 0,003 W/mC Heat-reflection, white: 92%
  4. 4. Water absorption after 24 hours, on the surface: 0,03 g/cm3 Usability temperature: from -60°C to +180°C Drying time at 20 ° C: can be repainted after 1 hour, complete drying of an 1 mm layer is 48 hours Water vapor permeability: 0,2 Sd (Sd<0,5 m = water vapor permeable) Coverage: 1 liter / 1 m2 / 1 mm (dry film thickness) UVB stability: UV stable Life span: 15 years Adhesion: Plasters: 0,92 Mpa Brick : 0,92 Mpa Metals : 0,90 Mpa Wood: 0,94 Mpa Thermo-S technical information
  5. 5. •Thermal insulation of interior walls •Elimination of thermal bridges •Thermal insulation of exterior walls •Facade insulation •Facade insulation of historic buildings •Thermal insulation of cold storage, refrigeration containers •Prevention of mold growth •Industrial building insulation •Thermal insulation of heating and cooling systems •Tank and pipe insulation •Insulation of the pipes of district heating. •Insulation of metal surfaces and roofs •Heat insulation of metal containers Areas of use:Areas of use:
  6. 6. The EMI conducted Bacteria and Fungi inquiry on the Thermo-S product in accordance with EN ISO 846:1999 standard. The mold resistance test results show that the Thermo-S insulating coating material may not be attacked by fungi and do not contain usable nutrients for fungi. The Thermo-S thermal insulation coating is therefore classified as fungi resistant. In the carried out bacterial resistance tests it was found that the Thermo-S thermal insulation coating does not contain usable nutrients for bacteria. The Thermo-S insulating coating is therefore classified as resistant to bacteria.
  7. 7. The coating of the walls kills the mold and improves the moisture control. Reduction of allergies and asthma by termination of the mold Usage of Thermo-S improves the comfort of the home or office by elimination of humidity caused by cold walls and cold bridges.
  8. 8. Thermo-S FrontPressThermo-S FrontPress Applied with Airless spray paint gun Thermo-S FrontThermo-S Front Applied with iron fillerApplied with iron filler Microscopic examination(400X)Microscopic examination(400X)
  9. 9. Thermo-S FrontPressThermo-S FrontPress Applied with Airless spray paint gun Microscopic examination(400X)Microscopic examination(400X) Comparative studyComparative study „ competitor's product 1” applied with Airless spray paint gun
  10. 10. Competing productsCompeting products Microscopic examination(400X)Microscopic examination(400X) competitor's product 2 competitor's product 3 competitor's product 1 applied with brush competitor's product 1 spray painted
  11. 11. Thermo-S performaceThermo-S performace Image captured with an thermal imaging camera.Image captured with an thermal imaging camera.
  12. 12. Thermo-S performaceThermo-S performace Thermal imaging capture presented on a graph.Thermal imaging capture presented on a graph.
  13. 13. Thermo-S advantages over the competition: The product is made in the European Union (CE) The product meets A2-s1, d0 fire classification (Euroclass) in case of an 1 mm layer. This rating is unique in this thickness. Above 1 mm layer thickness the fire classification is C2-s1,d0. The competing products do not meet this rating. Due to greater percentage by weight ratio of ceramic spheres the insulation properties of the Thermo-S product family is better than the measured values of the competing products. Even in case of relatively small orders we’re able to produce the product specifically for the customer’s needs. The products labeled as Press are manufactured using high resistance ceramic balls and are able to withstand up to 300 bar.
  14. 14. Thermo-S advantages over the competition: Due to to the high resistance to pressure the Press product line can be applied by airless technology. The airless spray techology significantly reduces the work time. The shortened spraying workflow leads to significant savings compared to conventional coating technology. With airless technology it is possible to coat 1000-1500 m2 per day, after an appropriate surface preparation. Significant inventory, flexible delivery from stock at short notice. Our products have a specific gravity of about 50% less than major competitors. Using the product will not cause significant increase in structural load.
  15. 15. Thermo-S advantages compared to conventional insulation technology: Simpler application technology compared to traditional insulation. Time saving fast application. Require fewer hours of work per unit area, cost-effective. Insulation of facades with complicated geometry, eg.: Monuments, silos. Suitable for thermal insulation (retrofitting and renewal) of existing buildings. The product itself may be colored so follow up painting not required, this results in labor and material savings. Can be used both indoors and outdoors. Eco-friendly product.
  16. 16. Thermo-S product family Thermo-S Basic – Primer for walls: A primer specifically developed for Mahlmart products. Its usage increases the surface adhesion and forms a durable bond between the layers. Suitable for exterior and interior use. Thermo-S Eco – Interior insulation: The binding material makes it ideal for the thermal insulation of indoor walls and interior metal surfaces. Due to its consistency it can be widely used and it has excellent adhesion. Areas of use: Thermal insulation of interior walls, interior insulation of thermal bridges; on concrete, gypsum, precast concrete panels and lime, cement or gypsum based plasters. Also ideal for the insulation of interior metal surfaces, heating and cooling systems, tanks, pipes and fittings. Application: Paint brush, paint roller, iron filler, standard spray equipment
  17. 17. Thermo-S product family Thermo-S Uni, UniPress – Indoor surfaces: Due to its material structure and ingredients it is primarily for indoor use. We recommend it for thermal insulation of indoor wall surfaces. Areas of use: thermal insulation of interior walls, interior insulation of thermal bridges; on concrete, gypsum, precast concrete panels and lime, cement or gypsum based plasters. It can be applied to wood and wood based materials. Thermo-S Front, FrontPress – Outdoor surfaces: The composition of materials and the binder makes it ideal for outdoor use. We recommend it for thermal insulation of outdoor wall surfaces. Areas of use: thermal insulation of exterior walls, exterior insulation of thermal bridges, flat roof insulation (bitumen sheets), facade insulation of historic buildings; on concrete, gypsum, precast concrete panels and lime, cement or gypsum based plasters. It can be applied to wood and wood based materials. Application: Paint brush, paint roller, iron filler, standard spray equipment, spray plastering machine and airless paint equipment. Pressure: from 10 to 300 bar.
  18. 18. Thermo-S product family Thermo-S Metal, MetalPress – Metal surfaces: The special binder material makes it ideal for indoor and outdoor use. We recommend it for thermal insulation of indoor and outdoor metal surfaces. Areas of use: outdoor and indoor metal surfaces, heating and cooling systems, cold storage, refrigerated containers, tanks, pipes and fittings, industrial buildings. Application: Paint brush, paint roller, iron filler, standard spray equipment, spray plastering machine and airless paint equipment. Pressure: from 10 to 300 bar.
  19. 19. Thermo-S with iron filler or roller
  20. 20. Suggested airless sprayer MARK V from GRACO
  21. 21. Thermo-S Front – house insulation, coloring - Debrecen
  22. 22. Thermo-S Front – house insulation, coloring - Debrecen
  23. 23. Thermo-S Uni – house insulation, - Budapest
  24. 24. Thermo-S Uni – house insulation, - Budapest
  25. 25. Thermo-S Front – Historical insulation, - Budapest Buda Castle
  26. 26. Thermo-S Front – SáriSáp
  27. 27. * At our Kiskunhalas site on the customer's request choice of pastel color is recommended in order to keep the heat reflection effect Range of colors*
  28. 28. We are proud of that after three years of research and development the result of our work is a product range that compares favorably to rival thin layer insulation solutions in terms of cost/performance ratio. Thank you for your interest in our products! HUNGAROWATT KFT. Hungary – 6400 Kiskunhalas, Kard u. 20 E-mail: karoly@thermo-s.hu ; info@thermo-s.hu www.thermo-s.hu
  1. A particular slide catching your eye?

    Clipping is a handy way to collect important slides you want to go back to later.

×