Tds fs84-topcoat - steel fire protection, fireproofing steel, fire stopping
Upcoming SlideShare
Loading in...5
×
 

Tds fs84-topcoat - steel fire protection, fireproofing steel, fire stopping

on

  • 120 views

Steel Fire Protection and Solvent-Based Intumescent Coatings for Interior and Exterior Structural Steel. Fire Security Systems providing cost effective Steel Fire Protection, Intumescent Coatings, ...

Steel Fire Protection and Solvent-Based Intumescent Coatings for Interior and Exterior Structural Steel. Fire Security Systems providing cost effective Steel Fire Protection, Intumescent Coatings, Fire Coating, Fireproofing Spray, Fireproofing, Fire Stopping, Cable Coating and Fire Protection Products worldwide like Middle East, USA, Canada, Africa, , Bahrain, Saudi Arabia, Turkmenistan, Malaysia, Indonesia, UAE

Statistics

Views

Total Views
120
Views on SlideShare
119
Embed Views
1

Actions

Likes
0
Downloads
0
Comments
0

1 Embed 1

http://meem.greyshare.com 1

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

Tds fs84-topcoat - steel fire protection, fireproofing steel, fire stopping Tds fs84-topcoat - steel fire protection, fireproofing steel, fire stopping Document Transcript

  • Description Single component solvent based top coat for Fire Security intumescent coatings Properties FS84 is a halogen free, self-extinguishing, fast drying coating based on modified resin. Application Areas • Structural steel members as columns, beams, girders and framework • 1/H-sections and Hollow Sections • Also on galvanized members • Excluded are steel constructions permanently stressed by ponding water due to rainfall or condensation or aggressive gases Instructions for the Application of FS84 before top coating make sure that the fire retardant coating is dried through (test by finger nail!) • temperature of FS84, ambient air and substrate > 5 °C • humidity < 80% • keep below dew point • FS84 can be applied by brush, roller or spray • tip size: airless: 0.009" - 0.013" • coverage rate: 130 - 180 g/m2 (depending on the colour shade) = wet about 130 μm = dry 60 μm • thinner: Xylene, max. 5% • if FS84 out of different batches must be applied, mix both materials before using • gloss level depends on colour shade • colour shades containing metal pigments may modify by application by brush or roller and by thinning Drying • The drying time depends on temperature and humidity. At a temperature of approx. 20 °C and a humidity of approx. 65% the drying time is as follows: • dust dry after about 1 hour • ready for the next layer after about 24 hours • dried through after 48 hours Transport / Storage • Shelf life: 12 months in unopened containers; storage at ambient temperatures. Packaging • supplied in 5 kg, 10 kg and 25 kg tin pails. Precautions for Safety Use Use FS84 in accordance with all applicable local and national regulations. Environment Health and Safety As regulations are often revised please request for the actual safety data sheet before using this product. • Please contact us for groups of RAL colour shades • Special colour shades according Sikkens, NCS or sample available on request - minimum quantity 10kg Disclaimer: The above data, particularly the recommendations for the application and use of Fire Security products are based on the manufacturer's knowledge and experience. Due to different materials and conditions of application, which are beyond our control, we recommend in any case carrying out sufficient tests in order to ensure that Fire Security products are suitable for the intended processes and applications. Therefore, any liability for such recommendations or any oral advice is expressly excluded unless we have acted willfully or by gross negligence. It is always the responsibility of the installer / purchaser to guarantee correct preparation, DFT (Fire Security Coatings) and thickness (Fire Security Firestop Products) of all Fire Security products. Fire Security Systems is not liable for installation or faulty installation. It is always the responsibility of the installer / purchaser to guarantee and certify the installation of materials. Technical Data Sheet FS84 Topcoat FIRE SECURITY SYSTEMS Canada: PO Box 21096, Coquitlam BC V3E 3P9 Canada Tel:+1 604 941 1001 Fax: +1 604 648 9311 Norway: Skibåsen 20b -4636 Kristiansand Norway Tel:+ 47 95 47 80 00 Fax: +47 38 02 15 31 mail@fire-security.net www.Fire-Security.net Dubai, UAE: Skibåsen 20b -4636 Kristiansand Norway Tel:+ 47 95 47 80 00 Fax: +47 38 02 15 31