Fs84 aq topcoat tds - fireproofing steel in uganda, fire stopping, intumescent coatings

192 views
98 views

Published on

FS22 Intumescent Firestop Pillows will provide up to 4 hours Fire Protection to metal services and cables passing through compartment floors and walls. Fire Stop Service from Fire Security Systems experts provide efficient Fire Stopping, Fire Coating, Fireproofing Spray, Firestop Compound, Fireproofing, Steel Fire Protection, Intumescent Coatings, Cable Coating and Fire Protection Products worldwide like Middle East, USA, Canada, Africa, Bahrain, Saudi Arabia, Turkmenistan, Malaysia, Indonesia, UAE

Published in: Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
192
On SlideShare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Fs84 aq topcoat tds - fireproofing steel in uganda, fire stopping, intumescent coatings

  1. 1. Description Single component water based top coat for Fire Security intumescent coatings Properties FS84 AQ is a halogen-free, self-extinguishing, fast drying coating based on water-based polymer. Application Areas • Structural steel members as columns, beams, girders and framework • 1/H-sections and Hollow Sections • Also on galvanized members • Excluded are steel constructions permanently stressed by ponding water due to rainfall or condensation or aggressive gases Instructions for the Application of FS84 AQ • before top coating make sure that the fire retardant coating is dried through (test by fingernail!) • temperature of FS84 AQ, air and steel > 5 °C • humidity < 80 % • notice dew point • Surface temperature max. + 40° C • application by brush, short pile velour or mohair paint roller or airless spraying • tip size: airless 0.013“ • coverage rate: 130 – 180 g / m2 (depends on shade) = wet apprx. 150 μm = dry apprx. 60 μm • if FS84 AQ must be applied out of different batches, mix both materials before using • gloss level depends on colour shade • colours based on metallic pigments may change shade by adding thinner or after application by brush or roller Drying • The drying time depends on temperature and humidity. At a temperature of approx. 20 °C and a humidity of approx. 65% the drying time is as follows: • dust dry after about 1 hour • ready for the next layer after about 24 hours • dried through after 48 hours Transport / Storage • Shelf life: 12 months in unopened containers; storage at ambient temperatures, store free from frost Packaging • supplied in 10 kg pails. Precautions for Safety Use Use FS84 AQ in accordance with all applicable local and national regulations. Environment Health and Safety As regulations are often revised please request for the actual safety data sheet before using this product. • Please contact us for groups of RAL colour shades • Special colour shades according Sikkens, NCS or sample available on request - minimum quantity 10kg Disclaimer: The above data, particularly the recommendations for the application and use of Fire Security products are based on the manufacturer's knowledge and experience. Due to different materials and conditions of application, which are beyond our control, we recommend in any case carrying out sufficient tests in order to ensure that Fire Security products are suitable for the intended processes and applications. Therefore, any liability for such recommendations or any oral advice is expressly excluded unless we have acted willfully or by gross negligence. It is always the responsibility of the installer / purchaser to guarantee correct preparation, DFT (Fire Security Coatings) and thickness (Fire Security Firestop Products) of all Fire Security products. Fire Security Systems is not liable for installation or faulty installation. It is always the responsibility of the installer / purchaser to guarantee and certify the installation of materials. Technical Data Sheet FS84 AQ Topcoat FIRE SECURITY SYSTEMS Canada: PO Box 21096, Coquitlam BC V3E 3P9 Canada Tel:+1 604 941 1001 Fax: +1 604 648 9311 Norway: Skibåsen 20b -4636 Kristiansand Norway Tel:+ 47 95 47 80 00 Fax: +47 38 02 15 31 Dubai, UAE: Skibåsen 20b -4636 Kristiansand Norway Tel:+ 47 95 47 80 00 Fax: +47 38 02 15 31 mail@fire-security.net www.Fire-Security.net

×