Fs23 a cable coating in the usa, fireproofing spray, fireproofing steel

131
-1

Published on

Steel Fire Protection and Solvent-Based Intumescent Coatings for Interior and Exterior Structural Steel. Fire Security Systems providing cost effective Steel Fire Protection, Intumescent Coatings, Fire Coating, Fireproofing Spray, Fireproofing, Fire Stopping, Cable Coating and Fire Protection Products worldwide like Middle East, USA, Canada, Africa, , Bahrain, Saudi Arabia, Turkmenistan, Malaysia, Indonesia, UAE

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
131
On Slideshare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Fs23 a cable coating in the usa, fireproofing spray, fireproofing steel

  1. 1. Tested to BS 476:Parts 20 & 22:1987 BS EN 1366-4 0 2hr 4hr Fire Rating You can request from our technical sales office the following information: • Material Safety Data Sheets • Installation Instructions • Product Certification Certificate number: FS453/05 F30 670A SEALANT Application FS23A Intumescent Sealant is suitable for sealing joints and service penetrations in fire walls, partitions, fire rated door frames and glazing systems. Tested in accordance with BS 476:Parts 20 & 22:1987 and BS EN 1366-4, FS23A Intumescent Sealant provides up to 4 hours fire protection in joints of up to 30mm wide. In addition to the fire rating the sealant may be used to seal joints in party walls to provide an acoustic seal. Acoustic FS23A Intumescent Sealant provides a Weighted Sound Reduction Index (Rw) of up to 57dB. Please consult our sales office with details of: • Type of construction • Required acoustic rating • Size of joint Airtight & Smoke Seal FS23A Intumescent Sealant will provide an airtight and cold smoke seal. Fire Rating Description FS23A Intumescent Sealant is a high specification, one part water based acrylic sealant, extruded from a cartridge loaded into a standard sealant gun. The depth of the joint will depend on the gap to be filled and the fire rating required (see fire rating). All surfaces must be thoroughly clean and free of bond breaking contaminants prior to application of the sealant. No priming is required for most construction substrates, however, it is recommended that a small area be tested on substrates. The sealant should not be applied if the ambient temperature is below 5ºC as adhesion will be impaired. The sealant is fast curing approximately 15 minute tack free time. When fully cured, the sealant is overpaintable. Under fire conditions the sealant forms a fire resistant ash. FS23A Intumescent Sealant SEALANTS FIRE RATINGS Joint Size Depth of Sealant Integrity Insulation Backing Type of Seal 10mm 10mm 240 mins 30 mins PE Foam Single 15mm 10mm 240 mins 30 mins PE Foam Single 20mm 15mm 240 mins 120 mins PE Foam Dual 20mm 20mm 240 mins 60 mins C144 Firestrip Single 30mm 15mm 240 mins 120 mins PE Foam Dual 30mm 15mm 240 mins 60 mins C144 Firestrip Single TECHNICAL INFORMATION
  2. 2. When ordering this product you will need the following information: • Size of cartridge • Quantity required Please order from our technical sales office. Canada: PO Box 21096, Coquitlam BC V3E 3P9 Canada P: +1 604 941 1001 F: +1 604 648 9311 Norway: Skibåsen 20b -4636 Kristiansand Norway P: +47 95 47 80 00 F: +47 38 02 15 31 UAE: PO Box 40068 Ajman UAE P: +971 6 7478842 F: +971 6 7478843 Email: mail@fire-security.net www.fire-security.net Sizes FS23A Intumescent Sealant is available in 310ml cartridges, 600ml foil packs and 900ml jumbo cartridges. Colours The sealant is available in white and grey. Coverage One 310ml cartridge will provide the following coverage rates: Specification Install FS23A Intumescent Sealant to provide up to 4 hours fire protection in all joints up to 30mm in all firewalls. Installation to be fully in accordance with manufacturer’s instructions. FS23A Intumescent Sealant SEALANTS Joint Size Depth of Sealant Yield per 310ml Cartridge 10mm 10mm 3.1 metres 20mm 15mm 1.03 meters 30mm 20mm 0.51 meters ORDERING FS23A Intumescent Sealant in blockwork joints. FS23A 900ml Jumbo Cartridge FS23A Intumescent Sealant sealing around service penetrations passing through blockwork wall. FS23A 600ml Foil Pack

×