• Share
  • Email
  • Embed
  • Like
  • Save
  • Private Content
E zcall all_spec_sheets
 

E zcall all_spec_sheets

on

  • 335 views

 

Statistics

Views

Total Views
335
Views on SlideShare
335
Embed Views
0

Actions

Likes
0
Downloads
1
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

    E zcall all_spec_sheets E zcall all_spec_sheets Document Transcript

    • Data Sheet No. DCS_Display_Control_Server_Spec_SheetEZcall™ EnterpriseDCS – Display Control ServerDescriptionThe Display Control Server is the core component of an EZcall™ system. The Display Control Server receivesand processes all alarms, events and schedule activity on an EZcall™ system. A DCS may be operated as astand-alone application directly connected to a single input system and a single output system, orcomplemented with various input, display and output client applications. The DCS may be expanded toaccept numerous output client applications by adding an MDS (Message Dispatch Server) which allowsseveral different output connections to reside on a single system as well as adds group, naming alias, Emailand message centre networking capabilities.All display, RTLS, and alarm input clients network with the DCS over a standard Ethernet LAN or WANnetwork using the TCP/IP protocol. A single EZcall™ DCS will support up to 10,000 supervised clientconnections of each type, and a single MDS connection over a network allowing over 10,000 alarm systemsmore than 10,000 messaging/output systems and over 10,000 display clients to be networked into a single-node EZcall™ installation. Multiple DCS servers may be networked into a central DCS server for multi-siteapplications. Watchdog signals are used between the DCS and all client applications to ensure reliablecommunications.The Display Control server is a hardware agnostic platform that can interface and integrate various types andbrands of alarm systems into a single system to share alarms, reporting and dispatching. The DCS alsoprovides added functionality to basic alarm systems, by adding user features such as dementia monitoring,door control and other similar features to simple alarm or i/o systems.Features • TCP/IP, UDP/IP, RS232, RS485 communications support • Secure encrypted server communications • Rapid setup and deployment for small or large systems • HL7 (Health Level 7) integration support • Multi-site support, or multi-node server support • Fail-Over/Standby high availability options • May be run as an application or a supervised Windows service • Virtual COM port support • Support for standard and proprietary protocols including XML, SOAP, SNMP, HTML • Integrated simulator for testing & troubleshooting • Direct output or networked output support • Wireless coverage test tool built-in supports coverage testing using any system • 3-click device swap provides user-friendly device replacement for repairing hardware • Direct input, networked input, or combined/mixed input • Remote client control with built-in remote-access engine • Integrated error logging and reporting • Integrated database maintenance utility, with support for SQL, MSDE • Configurable login schemes; per user, per access level, or per function • Large button touch-screen support • Skin’ able desktop allows the operator interface to be customized • Multiple language support, c/w English, Dutch, French, Chinese (simplified) 1939 144 Street th • Integrated history reporting utility Surrey, BC V4A 7M7 • Provides primary output, secondary and backup T. 604.812.SOFT (7638) • Support for static, dynamic, or scheduled assignments E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
    • • Configurable assignment options; by area, by room, by ward, global • Easy-to-use schedules; day, evening and night shifts may be individually configured • Smart SAM (Sensor Activity Monitor) ensures device sensors are always operational • PC Watchdog card support & integrated software watchdog • Configurable icons • Global priority standardization, up to 9999 system priorities • Packaged with; Paging Encoder Emulator, Virtual Null Modem Application, EZtext server, Time Sync Client, EZstart application launcher and Ascom OAP emulator utilities • Extensive log reports simplify system troubleshootingSupported ApplicationsEDC – Event Display Client TDC – Target Display Client TPH – Touch-Panel HostAIC – Alarm Input Client NWC – Network Watchdog Client BBC – Button Bar ClientPDC – Popup Display Client MDS – Message Dispatch Server EGW – EZcall™ GuardRFID WrapperVKC – Virtual Keypad Client TTC – Text Talker Client EEW - EZcall™ Ekahau WrapperWAC – Web Access Client iServer™ – Inovonics Wireless ServerEWC – EZcall™ Wireless Client SAS – Spider Alert ServerFCC – Facility Control Client TMC – Text Messaging ClientVAC – Virtual Alarm Client EZtext™/LoginOut™ ServerSupported Direct Output ProtocolsVisiplex paging output Globestar ConnexAll TMDP (Text Message Dispatch Protocol)COMP2 paging output TAP (Telocator Alphanumeric Protocol) 1.8 paging direct serial outputAscom enhanced TAP output TAP 1.8 dial-up paging outputSupported Direct Input ProtocolsHill-Rom LightCom nurse call system networkMaxivox Maxicomm I nurse call system networkMaxivox Maxicomm II nurse call system networkGE/Dukane StaffCall Pro nurse call system networkRaw Data inputAdded Applications/FunctionsStaff location/presenceDementia monitoring w/Artificial Intelligence auto-configurationStaff rounds monitoringGuard tour monitoringPatient/Resident check-inService requirementsDoor monitoring and alarm w/access control supportCCTV popup and control supportRTLS equipment location monitoring and alarm supportSystem RequirementsCPU: Intel Xeon Quad Core or Equivalent, >200MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 160GbInterface: RS232 db9/Ethernet (alarm and paging system dependent) 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
    • Data Sheet No. MDS_Message_Dispatch_Server_Spec_SheetEZcall™ EnterpriseMDS – Message DispatchServerDescriptionThe Message Dispatch Server is an expansion module to an EZcall™ DCS (Display Control Server) that allows multipleoutput clients to be used and provides additional features. In addition to adding the ability for multiple output clientconnections, the MDS has a built-in Email and LED message board interface. By adding an MDS to an existing DCS,additional EZcall™ features are enabled, including output device group creation and output device aliasing. The MessageDispatch Server networks directly with an EZcall™ DCS over a standard Ethernet LAN or WAN network using the TCP/IPprotocol. The Message Dispatch Server supports up to 10,000 of any type of output client connection, allowing the systemto be very expandable. Every DCS may only be linked to one MDS and typically reside on the same server computer.Watchdog signals are used between the DCS and the MDS applications to ensure reliable communications.Features • SMTP, POP3, TCP/IP, UDP/IP, RS232, RS485 communications support • Secure encrypted server communications • Rapid setup and deployment • Standard or secure Email server support, with MIME, HTML, and UUencoding support • May be run as an application or a supervised Windows service • Virtual COM port support • Supports direct connection to LED message centres • Output device group creation and alias naming adds versatility to a DCS server • Instant Email SMS message output capability supported by mobile devices • Prioritized Email output capability • Integrated simulator for testing & troubleshooting • Extensive log reports simplify system troubleshootingSupported Systems/ProductsApplication Connections LED Message Centers Email OutputTPC – Telephone Paging Client (up to 9999) Edwards Message Centre SMTPSPC – Serial Paging Client (up to 9999) Alpha PrintPak POP3CAC – Command Argument Client (up to 9999) Alpha EZkey II MIMEOCC – Output Control Client (up to 9999) Alpha EZ95 UUencodingDCS – Display Control Server (1 connection) Pro-Lite ver. 5.25 Pro-Lite ver.6System RequirementsCPU: Intel Xeon Quad Core or Equivalent, >200MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 120GbInterface: RS232 db9/Ethernet (output system dependent) 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
    • Data sheet No. WAC_Web_Access_Client_Spec_SheetEZcall™ EnterpriseWAC – Web Access ClientDescriptionThe Web Access Client is a powerful EZcall™ server application that allows EZcall™ DCS functions to be accessed usingany standard web browser. The Web Access Client prevents the need of installing and supporting numerous clientprogram installations on user computers. By allowing browser access to most EZcall™ functions, a large facilitydeployment may be completed in a fraction of the time needed by using dedicated client programs. The browser interfacealso allows an EZcall™ deployment to be operating system independent. No matter what O.S. or web browser is beingused in the facility (Linux, Unix, MAC, Windows), all will function in the same manner using their standard web browsers asthe user interface. The Web Access Client is also supported by all popular standard and mobile browsers including;Firefox, Windows Internet Explorer, Apple Safari, Opera, Google Chrome.Features • Standard HTTP 1.0 and 2.0 support ensures reverse compatibility • Secure password protection login • Secure encrypted server communications • Built-in FGA Web Server does not rely or use IIS • Reliable FGA Web Server not susceptible to HTTP virus attacks, spoofing or malware • Rapid setup and deployment; no HTML language required • May be run as an application or a supervised Windows service • Alarm text and graphical map display • Manual text messaging to any EZcall™ output device • Alarm history display • Call Routing Assignments • On-Screen Virtual Call Buttons • Staff Presence location display • Reconfigurable skins allows graphics to be customized to the site/customer • Mobile browser support (iPhone, BlackBerry, Android, Windows Mobile) • Extensive log reports simplify system troubleshootingSystem RequirementsClients: Web browsers that support HTTP 1.0CPU: Intel Xeon Quad Core or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: >120GB @ 7200RPM (> 10,000RPM recommended) 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. © Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
    • Data Sheet No. IWS_iServer_Inovonics_Wireless_Server_Spec_SheetEZcall™ EnterpriseIWS – iServer™ InovonicsWireless ServerDescriptionThe EZcall™ iServer™ is a fully functional integrated RTLS system that can network with an EZcall™ system. The iServer™uses the Inovonics EchoStream hardware to function as a wireless duress, locating and nurse call solution. The iServer™communicates directly to the Inovonics EchoStream hardware to allow all EchoStream alarms to be received andprocessed by EZcall™, as well as allowing the iServer™ to function as a stand-alone alarm system. Every IWS can network(optional) to an EZcall™ DCS (Display Control Server) over a standard Ethernet LAN or WAN network using the TCP/IPprotocol. A single EZcall™ DCS will support up to 10,000 supervised EGW client connections over a network allowing thatmany systems to be networked into an enterprise EZcall™ installation. Watchdog signals are used between the DCS andall EGW applications to ensure reliable communications.Features • TCP/IP, UDP/IP, RS232, RS485 communications support • Secure encrypted server communications • Fully functional stand-alone wired/wireless duress/alarm system • Rapid setup and deployment • Real-time location and alarm information monitoring using proprietary RTLE™ algorithms • Integrated web-server for alarm and history display, as well as transmitter management • May be run as an application or a supervised Windows service • User configurable priorities and messages • Supports direct connection to numerous pocket paging systems • Supports WWC wireless wizard client connections for system maintenance • Integrated transmitter simulator for testing & troubleshooting • Extensive log reports simplify system troubleshootingSupported Systems/ProductsInovonics EchoStream serial receiver, repeaters and transmittersEZcall™ DCS server (optional)WWC wireless wizard clientStandard HTTP 1.0 capable web browsersSystem RequirementsCPU: Intel Core2 Duo or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 160GbInterface: Inovonics proprietary protocol 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions EchoStream and Inovonics are registered trademarks of Inovonics Inc..
    • Data Sheet No. EEW_EZcall_Ekahau_Wrapper_Spec_SheetEZcall™ EnterpriseEEW – EZcall™ EkahauWrapperDescriptionThe EZcall™ Ekahau Wrapper is a bi-directional interface between an EZcall™ system and an Ekahau RTLS system. TheEEW integrates directly with an Ekahau RTLS server using the proprietary Ekahau XML-based protocol to allow all Ekahaualarms to be received and processed by EZcall™, as well as allowing an EZcall™ system to dispatch alarm messages toEkahau WiFi badge tags. Every EEW networks to an EZcall™ DCS (Display Control Server) over a standard Ethernet LANor WAN network using the TCP/IP protocol. A single EZcall™ DCS will support up to 10,000 supervised EEW clientconnections over a network allowing that many systems to be networked into an enterprise EZcall™ installation. Watchdogsignals are used between the DCS and all EEW applications to ensure reliable communications.Features • TCP/IP, UDP/IP, RS232, RS485 communications support • Secure encrypted server communications • Secure encrypted RTLS server communications • Rapid setup and deployment • Real-time location and alarm information monitoring • Message dispatching to badge tags • May be run as an application or a supervised Windows service • User configurable priorities and messages • Integrated badge tag simulator for testing & troubleshooting • Extensive log reports simplify system troubleshootingSupported Systems/ProductsEkahau RTLS serverEZcall™ DCS serverSystem RequirementsCPU: Intel Core2 Duo or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 60GbInterface: TCP/IP XML-based protocol 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions Ekahau is a trademark of Ekahau Corporation Inc.
    • Data Sheet No. EGW_EZcall_GuardRFID_Wrapper_Spec_SheetEZcall™ EnterpriseEGW – EZcall™ GuardRFIDWrapperDescriptionThe EZcall™ GuardRFID Wrapper is a bi-directional interface between an EZcall™ system and a GuardRFID RTLS system.The EGW integrates directly with an GuardRFID Argus server using the proprietary GuardRFID XML-based protocol toallow all GuardRFID SafeGuard, TotGuard and AllGuard alarms to be received and processed by EZcall™, as well asallowing an EZcall™ system to dispatch alarm messages to GuardRFID staff tags. Every EGW networks to an EZcall™DCS (Display Control Server) over a standard Ethernet LAN or WAN network using the TCP/IP protocol. A single EZcall™DCS will support up to 10,000 supervised EGW client connections over a network allowing that many systems to benetworked into an enterprise EZcall™ installation. Watchdog signals are used between the DCS and all EGW applicationsto ensure reliable communications.Features • TCP/IP, UDP/IP, RS232, RS485 communications support • Secure encrypted server communications • Secure encrypted Argus server communications • Rapid setup and deployment • Real-time location and alarm information monitoring • Message dispatching to staff tags • May be run as an application or a supervised Windows service • User configurable priorities and messages • Integrated badge tag simulator for testing & troubleshooting • Extensive log reports simplify system troubleshootingSupported Systems/ProductsGuardRFID Argus serverEZcall™ DCS serverSystem RequirementsCPU: Intel Core2 Duo or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 60GbInterface: TCP/IP XML-based protocol 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions TotGuard, Argus, SafeGuard, AllGuard and GuardRFID are trademarks of GuardRFID Inc.
    • Data Sheet No. TPH_Touch_Panel_Host_Spec_SheetEZcall™ EnterpriseTPH – Touch-Panel HostDescriptionThe Touch-Panel Host is an EZcall™ server application to monitor alarm information from networked orserially-attached EZtouch™ panels. Various protocols are supported by the TPH client application that maybe received by a direct serial, or supervised TCP/IP connection. Every TPH client networks to an EZcall™DCS (Display Control Server) over a standard Ethernet LAN or WAN network using the TCP/IP protocol. Asingle EZcall™ DCS will support up to 10,000 supervised TPH client connections over a network allowing thatmany EZtouch™ panels and systems to be networked into an enterprise EZcall™ installation. Watchdogsignals are used between the DCS and all TPH applications to ensure reliable communications.The TPH client operates as a server that hosts any number of supervised EZtouch™ panels. All EZtouch™events are logged by the TPH and instantly forwarded to the EZcall™ DCS server for immediate alarmdispatching and archiving. A single TPH can host any combination or 2.8 inch and 4.3 inch EZtouch™panels. A single TPH may be sued to host both serially attached or Ethernet networked EZtouch™ panelsproviding flexibility of using home-run or daisy-chained cabling on a single system.Features • TCP/IP, UDP/IP, RS485 communications support • Secure encrypted server communications • Rapid setup and deployment • May be run as an application or a supervised Windows service • Supervised touch panel connections • On-screen virtual touch-panel emulates the attached devices • Integrated simulator for testing & troubleshooting • Simple integration to an EZcall™ DCS server • Supports any combination or PoE Ethernet and RS485-looped EZtouch ™ panels • Customizable priorities and alertsSupported Systems/ProductsEZ-TP28E - 2.8” Color LCD PoE Ethernet EZtouch™ panelsEZ-TP28S - 2.8” Color LCD RS485 serial EZtouch™ panelsEZ-TP43S – 4.3” Color LCD RS485 serial EZtouch™ panelsEZcall™ DCS (Display Control Server)System RequirementsCPU: Intel Xeon Quad Core or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: >120Gb @ 7200RPM (>10,000RPM recommended)Interface: RS232 db9/Ethernet (alarm system dependent) 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
    • Data Sheet No. EZtouch_Panels_Spec_SheetEZcall™ EnterpriseEZtouch™ – Color Touch-Screen PanelsDescriptionThe EZtouch™ panels are a user-friendly wall-mounted touch-screen panel that provide configurable alarm buttons andalarm display capabilities. EZtouch™ panels are available as PoE powered Ethernet devices and RS485 serial devices toallow multiple cabling configurations to be used. Each EZtouch™ panel supports from zero to 40 call buttons and mayalso be configured with an alarm display and/or door control & monitoring. Every EZtouch™ panel networks to an EZcall™TPH (Touch Panel Host) over a standard Ethernet LAN/WAN network using the TCP/IP protocol or through an RS485 seriallink. A single EZcall™ TPH will support up to 100,000 supervised EZtouch™ panel connections on a single system.Watchdog signals are used between the TPH and all EZtouch™ panels to ensure reliable supervised communications.EZtouch™ panels are available in two sizes; 2.8” display and 4.3” display. EZtouch™ panels are water-resistant with anIP65 rating and may be cleaned using standard cleaners. All EZtouch™ panels are designed to mount in industry-standard North American electrical boxes and also have weatherproof surface-mount backboxes available for outdoormounting. These cost effective touch panels provide an attractive and cost effective alarm initiation or display device thatmay be used virtually anywhere. EZtouch™ panels may be used as alarm initiation devices, to display alarms at strategiclocations or as workflow control devices. With EZtouch panels, you are free to select which buttons you need at alllocations and can add/remove buttons as required.Features • Intuitive user-friendly call buttons • Timeout digital clock display helps reduce light emission during evenings. • Supervised connection alerts EZcall™ whenever a panel is disconnected or offline • PoE powered Ethernet and RS485 models available • Ethernet and RS485 models may be intermixed on a single TPH • Fully configurable and customizable buttons with icons • Alarm display (optional) • Door monitoring and control display (optional) • Integrated clean-screen option allows the screen to be cleaned • Quick and easy to setup • ESD Protection to 4kV • Wide operating temperature range from -20°C ~ 70°C • IP65 Waterproof front panel • Built-in alarm sounder (speaker on the EZ-TP43 models) • Very low power consumption (<2.5W) • 5-Year warrantySystem RequirementsEZcall™ TPH Touch Panel Host12VDC power supply (RS485 models)IEEE 802.3af class 1 PoE network switch (Ethernet models)Specifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
    • Physical CharacteristicsEZ-TP28 panels have a 2.8” TFT LCD color touch-screen display. EZ-TP28E is a PoE powered Ethernet model and the EZ-TP28S is an RS485 serially networked (up to 31 per loop) model. EZ-TP28S dimensions are similar to EZ-TP28E.EZ-TP43S panels hand a 4/3” TFT LCD color touch-screen display and are networked with an RS485 loop (up to 31).Specifications 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions
    • Data Sheet No. AIC_Alarm_Input_Client_Spec_SheetEZcall™ EnterpriseAIC - Alarm Input ClientDescriptionThe Alarm Input Client is the input gateway for an EZcall™ system to retrieve alarm information from virtually any alarmsystem or hardware. Various protocols are supported by the AIC client application that may be received by a direct serial,TCP/IP, or UDP/IP connection. Every AIC client networks to an EZcall™ DCS (Display Control Server) over a standardEthernet LAN or WAN network using the TCP/IP protocol. A single EZcall™ DCS will support up to 10,000 supervised AICclient connections over a network allowing that many systems to be networked into a single-node EZcall™ installation.Watchdog signals are used between the DCS and all AIC applications to ensure reliable communications.Features • TCP/IP, UDP/IP, RS232, RS485 communications support • Supports XLM, SOAP, TAP, and Proprietary protocols • Secure encrypted server communications • Rapid setup and deployment • AIC hardware appliance; reduces setup/deployment time • May be run as an application or a supervised Windows service • Virtual COM port support • Integrated simulator for testing & troubleshooting • Built-in web-server provides instant alarm display & activity monitoring • Extensive log reports simplify system troubleshootingSupported Systems/ProductsFire Alarm Systems Nurse Call Systems Intercom SystemsEdwards EST-3 serial interface Dukane Procare 6000 VM input Algo VoiceComm 3400 OAI inputEdwards Quick serial interface Dukane Procare 2000 network input Dukane Starcare OAI inputSimplex 4100U serial input Dukane Procare 6000 ARMS input Edwards AccuSound Network inputSimplex 5000 serial input Dukane Procare 6000 OAI input Maxivox MC1 network interfaceNotifier AM2020 serial Dukane Procare 6000 TAP input Sentex InfinityMircom serial Dukane StaffCall Pro Network inputHoneywell XLS-1000 serial GE Caregard modem input Other Alarm Systems GE Telligence Telergy TAP input Andover Continuum ascii input GE Telligence SQL database interface Genetec Synergis/Omnicast Hill-Rom ComLite network input GE Facility CommanderPaging System Emulation Maxivox Maxicomm I network interface GE Summit Pro PET inputAscom Wireless paging input Maxivox Maxicomm II network interface Kantech Enterprise/GlobalGeneric TAP server emulation Rauland Responder 3000 net-controller KeyscanVisiplex pocket paging input Rauland Responder 4000 PIP OAI RBH AxiomCOMP1 / COMP2 paging input Rauland Responder IV TAP input Senstar Stellar StarNetGlobestar Formatted TAP input Tunstall CMS4000 OAI serial interface X-Mark Halo TAP inputHome Free AMS ElmoPage input Zettler Sentinel 500 TAP input X-Mark Hugs/MyCall/FintItNordicom AL800 server West-Com Endeavour/Novus/Odyssey+ X-Mark RoamAlert TAP inputSalcom paging server Tektone NC300 / NC300 II Visonic Eiris OAI inputScope paging server Ascom TeleCARE / TelePROTECT Visonic Eiris 3.0 UDP capture Simplex EZcare TAP input ADAM-6000 I/O boards Austco APR protocol Ontrak ADR2000 I/O boardsSystem RequirementsCPU: Intel Core2 Duo or Equivalent, >200MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended) 1939 144 Street thHard Disk: 120Gb Surrey, BC V4A 7M7Interface: RS232 db9/Ethernet (alarm system dependent) T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
    • Data Sheet No. VKC_Virtual_Keypad_Client_Spec_SheetEZcall™ EnterpriseVKC – Virtual Keypad ClientDescriptionThe Virtual Keypad Client is the input gateway for an EZcall™ system to retrieve alarm information fromvarious intrusion alarm systems. Various protocols are supported by the VKC client application that may bereceived by a direct serial, TCP/IP, or UDP/IP connection. Every VKC client networks to an EZcall™ DCS(Display Control Server) over a standard Ethernet LAN or WAN network using the TCP/IP protocol. A singleEZcall™ DCS will support up to 10,000 supervised VKC client connections over a network allowing that manyintrusion alarm systems to be networked into a single-node EZcall™ installation. Watchdog signals are usedbetween the DCS and all VKC applications to ensure reliable communications.The VKC client also includes a built-in web-server that allows operators to connect to the VKC and it’sassociated intrusion alarm system through any standard web browser. All intrusion alarm keypad functionsincluding arming, disarming, and bypassing zones are supported through the intuitive on-screen virtualkeypad that emulates the actual keypads functions.Features • TCP/IP, UDP/IP, RS232, RS485 communications support • Secure encrypted server communications • Rapid setup and deployment • May be run as an application or a supervised Windows service • Virtual COM port support • On-screen virtual keypad emulates the attached system • Integrated simulator for testing & troubleshooting • Built-in web-server provides instant alarm display & system control • Extensive log reports simplify system troubleshootingSupported Systems/ProductsDSC MaxsysDSC Power864GE NetworXGE ConcordGE AdventHoneywell/Ademco VistaParadox EspritParadox SpectraSystem RequirementsCPU: Intel Xeon Quad Core or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: >120Gb @ 7200RPM (>10,000RPM recommended)Interface: RS232 db9/Ethernet (alarm system dependent) 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
    • Data Sheet No. BBC_Button_Bar_Client_Spec_SheetEZcall™ EnterpriseBBC – Button Bar ClientDescriptionThe Button Bar Client is a unique input client used to generate alarms on an EZcall™ system from a PC desktop. TheButton Bar Client is fully customizable to provide any quantity and type of on-screen button with different functions. TheBBC provides a non-intrusive bar on a PC desktop that can be hidden away until needed. Ideal uses include nurse stationporter and cleaner requests, and non-conventional workflow requests. Buttons may be added or deleted from the bar andconfigured individually on each desktop. Every BBC client networks to an EZcall™ DCS (Display Control Server) over astandard Ethernet LAN or WAN network using the TCP/IP protocol. A single EZcall™ DCS will support up to 10,000supervised BBC client connections over a network allowing that many systems to be networked into a single-node EZcall™installation. Watchdog signals are used between the DCS and all BBC applications to ensure reliable communications.Features • Attractive display does not take-up the entire screen • Configurable wards or areas – only display the locations that are needed • May be run as an application or a supervised Windows service • Event list display • Lockable to prevent shutting-down or relocating the window • Extensive log reports simplify system troubleshootingSystem RequirementsCPU: Intel Core2 Duo or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista Ultimate, Linux Ubuntu 9.0Memory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 60Gb 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
    • Data Sheet No. CAC_Command_Argument_Client_Spec_SheetEZcall™ EnterpriseCAC – Command ArgumentClientDescriptionThe Command Argument Client is an output gateway for an EZcall™ system to output standard DOS-like commands tocontrol various specialized systems. The Command Argument Client may be fully customized to generate virtually anycommand-line argument output needed. Every CAC client networks to an EZcall™ MDS (Message Dispatch Server) over astandard Ethernet LAN or WAN network using the TCP/IP protocol. A single EZcall™ MDS will support up to 10,000supervised CAC client connections over a network allowing that many systems to be networked into a single-node EZcall™installation. Watchdog signals are used between the DCS and all CAC applications to ensure reliable communications.Features • Fully configurable & customizable command-line arguments • Secure encrypted server communications • Rapid setup and deployment • May be run as an application or a supervised Windows service • Virtual COM port support • Integrated testing & troubleshooting utility • Extensive log reports simplify system troubleshootingSystem RequirementsCPU: Intel Core2 Duo or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 60Gb 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions DOS is a registered trademark of Microsoft Corp.
    •   EZcall Enterprise EDC – Event Display Client Description The Event Display Client is an output client used to display alarm or status messages on a computer output display. The Event Display Client is fully configurable to display events from specific areas and/or specific call types and priorities. Some uses include centralized Code Blue annunciators, local annunciators, maintenance or housekeeper alarm displays. Every EDC client networks to an EZcall DCS (Display Control Server) over a standard Ethernet LAN or WAN network using the TCP/IP protocol. A single EZcall DCS will support up to 10,000 supervised EDC client connections over a network allowing that many systems to be networked into a single-node EZcall installation. Watchdog signals are used between the DCS and all EDC applications to ensure reliable communications. Features  Skin’able border images allow for a customized appearance of the display  Configurable wards or areas – only display the locations that are needed  Selectable priorities – only display the events types that are required  Configurable time – allows events to only generate popups at certain times-of-day  Hidden mouse pointer support  May be run as an application or a supervised Windows service  Configurable fields and text size, color & font  Date/Time display  Configurable screen size and location with locking capability to ensure that the display is always shown at the same location every time it is started  Multiple EDC support – run several EDC windows on the same computer to display various event types or areas on a single display  Windows and Linux versions available  Support for Microsoft Agent popup characters  Extensive log reports simplify system troubleshooting System Requirements CPU: Intel Core2 Duo or Equivalent, >180MHz OS: Windows XP, 7, Server 2003, Vista Ultimate, Linux Ubuntu 9.0 Memory: 2GB minimum (4GB recommended) LAN/WAN: 10/100 (Gigabit recommended) Hard Disk: 60Gb 1939 144th Street Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.ca  Specifications subject to change without notice.  Copyright 2010 – QBsoft Solutions 
    •   EZcall Enterprise PDC – Popup Display Client Description The Popup Display Client is an output client used to display alarm or status messages on a computer output display. The Event Display Client is fully configurable to display events from specific areas and/or specific call types and priorities. Some uses include centralized Code Blue annunciators, local annunciators, maintenance or housekeeper alarm displays. Every EDC client networks to an EZcall DCS (Display Control Server) over a standard Ethernet LAN or WAN network using the TCP/IP protocol. A single EZcall DCS will support up to 10,000 supervised EDC client connections over a network allowing that many systems to be networked into a single-node EZcall installation. Watchdog signals are used between the DCS and all EDC applications to ensure reliable communications. Features  Select from over 10 different window types  Configurable wards or areas – only display the locations that are needed  Selectable priorities – only display the events types that are required  Configurable time – allows events to only generate popups at certain times-of-day  May be run as an application or a supervised Windows service  Configurable fields and text size, color & font  Text-to-speech and sound file support allows sounds to be used in conjunction with a visual popup window  Lockable to prevent operators from shutting-down the alarm display  Extensive log reports simplify system troubleshooting System Requirements CPU: Intel Core2 Duo or Equivalent, >180MHz OS: Windows XP, 7, Server 2003, Vista Ultimate, Linux Ubuntu 9.0 Memory: 2GB minimum (4GB recommended) LAN/WAN: 10/100 (Gigabit recommended) Hard Disk: 60Gb 1939 144th Street Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.ca  Specifications subject to change without notice.  Copyright 2010 – QBsoft Solutions 
    •   EZcall Enterprise TTC – Text Talker Client Description The Text Talker Client is a Text-to-Speech output client that allows alarm messages to be verbally announced using a PC speaker output. The Text Talker Client is compatible with most industry-standard text-to-speech engines and voices and supports multi-language translation. A TTC client may be configured to output specific wards or areas or all areas to provide multiple output alarm messaging using standard spoken messages rather than pre-recorded alerts. Every TTC client networks to an EZcall MDS (Message Dispatch Server) over a standard Ethernet LAN or WAN network using the TCP/IP protocol. A single EZcall MDS will support up to 10,000 supervised TTC client connections over a network allowing that many systems to be networked into a single-node EZcall installation. Watchdog signals are used between the DCS and all TTC applications to ensure reliable communications. Features  Fully configurable & customizable using several brands of text-to-speech voice  Configurable time – allows events to only output at certain times-of-day  Secure encrypted server communications  Rapid setup and deployment  May be run as an application or a supervised Windows service  Supports text-to-speech, pre-recorded .WAV files or a combination of both  Support for Microsoft Agent popup characters  Built-in abbreviation and phonetic translator to ensure that all messages are understood  Integrated testing & troubleshooting utility  Extensive log reports simplify system troubleshooting System Requirements CPU: Intel Core2 Duo or Equivalent, >180MHz OS: Windows XP, 7, Server 2003, Vista Ultimate Memory: 2GB minimum (4GB recommended) LAN/WAN: 10/100 (Gigabit recommended) Hard Disk: 60Gb 1939 144th Street Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.ca  Specifications subject to change without notice.  Copyright 2010 – QBsoft Solutions 
    • Data Sheet No. TDC_Target_Display_Client_Spec_SheetEZcall™ EnterpriseTDC – Target Display ClientDescriptionThe Target Display Client is a unique output client used to display real-time staff response times or call activity. The TargetDisplay Client is fully configurable to display events from specific areas and allows you to set a specific target responsetime. Only events outside the target time will increment the counter and be displayed. Ideal uses include manager heads-up display for at-a-glance status reporting and worker incentive displays. Every TDC client networks to an EZcall™ DCS(Display Control Server) over a standard Ethernet LAN or WAN network using the TCP/IP protocol. A single EZcall™ DCSwill support up to 10,000 supervised TDC client connections over a network allowing that many systems to be networkedinto a single-node EZcall™ installation. Watchdog signals are used between the DCS and all TDC applications to ensurereliable communications.Features • Attractive display does not take-up the entire screen • Configurable wards or areas – only display the locations that are needed • May be run as an application or a supervised Windows service • Event list display • Lockable to prevent shutting-down or relocating the window • Extensive log reports simplify system troubleshootingSystem RequirementsCPU: Intel Core2 Duo or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista Ultimate, Linux Ubuntu 9.0Memory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 60Gb 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
    •   EZcall Enterprise NWC – Network Watchdog Client Description The Network Watchdog Client is an input client that allows an EZcall system to supervise network software components and hardware. The Network Watchdog Client monitors other network devices by sending requests for their response. The NWC client will alert the DCS server of any network components that is unresponsive to generate a system alarm or perform other actions. Various protocols are supported by the NWC client application including; PING, SNMP, and MAC ID request. Every NWC client networks to an EZcall DCS (Display Control Server) over a standard Ethernet LAN or WAN network using the TCP/IP protocol. A single EZcall DCS will support up to 10,000 supervised NWC client connections over a network allowing that many intrusion alarm systems to be networked into a single-node EZcall installation. Watchdog signals are used between the DCS and all NWC applications to ensure reliable communications. Features  TCP/IP, UDP/IP, SNMP, PING communications support  Rapid setup and deployment  May be run as an application or a supervised Windows service  Receive alerts of unresponsive critical network components  Integrated testing & troubleshooting utilities  Extensive log reports simplify system troubleshooting System Requirements CPU: Intel Core2 Duo or Equivalent, >180MHz OS: Windows XP, 7, Server 2003, Vista Ultimate Memory: 2GB minimum (4GB recommended) LAN/WAN: 10/100 (Gigabit recommended) Hard Disk: 60Gb 1939 144th Street Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.ca  Specifications subject to change without notice.  Copyright 2010 – QBsoft Solutions 
    • Data Sheet No. SPC_Serial_Paging_Client_Spec_SheetEZcall™ EnterpriseSPC – Serial Paging ClientDescriptionThe Serial Paging Client is the output gateway for an EZcall™ system to forward alarm text messages tovarious SMS and paging systems or serial printers. Various protocols are supported by the SPC clientapplication that may connect by a direct serial, TCP/IP, or UDP/IP connection. Every SPC client networks toan EZcall™ MDS (Message Dispatch Server) over a standard Ethernet LAN or WAN network using the TCP/IPprotocol. A single EZcall™ MDS will support up to 10,000 supervised SPC client connections over a networkallowing that many systems to be networked into a single-node EZcall™ installation. Watchdog signals areused between the DCS and all SPC applications to ensure reliable communications.Features • TCP/IP, UDP/IP, RS232, RS485 communications support • Secure encrypted server communications • Rapid setup and deployment • SPC hardware appliance; reduces setup/deployment time • May be run as an application or a supervised Windows service • Virtual COM port support • Built-in abbreviation translator to ensure that all messages fit the mobile device screens • Integrated simulator for testing & troubleshooting • Extensive log reports simplify system troubleshootingSupported ProtocolsCOMP1 / COMP1 Visonic SL-PTX Poltys DCC output (Eiris emulation)TAP/PET 1.8 (serial & dial-up) Edwards EST-3 printer emulation Pelco P & D ascii outputVisiplex basic EZcall serial printer detailed Salcom paging protocolVisiplex VS-40 EZcall serial printer simple Scope paging protocolAscom Enhanced TAP Waveware protocol SecureTech WAVE 2-way radio outputJ-Tech Extended Zetron TAP (capcode support)Austco APR Globestar formatted TAPNordicom AL800 GE Telergy 7.1 TAP (GUID support)System RequirementsCPU: Intel Core2 Duo or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 60GbInterface: RS232 db9/Ethernet (paging system dependent) 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
    • Data Sheet No. TPC_Telephone_Paging_Client_Spec_SheetEZcall™ EnterpriseTPC – Telephone PagingClientDescriptionThe Telephone Paging Client is the output gateway for an EZcall™ system to forward alarm text messages to various wiredand wireless telephony systems. Various protocols are supported by the TPC client application that may connect by adirect serial, TCP/IP, or UDP/IP connection. Every TPC client networks to an EZcall™ MDS (Message Dispatch Server)over a standard Ethernet LAN or WAN network using the TCP/IP protocol. A single EZcall™ MDS will support up to 10,000supervised TPC client connections over a network allowing that many systems to be networked into a single-node EZcall™installation. Watchdog signals are used between the DCS and all TPC applications to ensure reliable communications.Features • TCP/IP, UDP/IP, RS232, RS485 communications support • Secure encrypted server communications • Rapid setup and deployment • TPC hardware appliance; reduces setup/deployment time • May be run as an application or a supervised Windows service • Virtual COM port support • Built-in abbreviation translator to ensure that all messages fit the mobile device screens • Integrated simulator for testing & troubleshooting • Extensive log reports simplify system troubleshootingSupported Systems/ProductsNortel CompanionPolycom Spectralink Lin150/Link3000Polycom Spectralink NetLinkPolycom KirkAscom AnalogAscom VoIPCisco 7900 series telephonesNEC OpenWorXPanasonic KX-TDxGeneric TAPI/SAPIVoceraSystem RequirementsCPU: Intel Core2 Duo or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 60GbInterface: RS232 db9/Ethernet (telephony system dependent) 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. sales@qbsoft.ca W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.