User guide reflexionProjection Screen

154
-1

Published on

Here is a user guide for one of the screens from Elite

Elite screens are available from Dukane.

Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.





For more information contact Dukane AV :

Phone: 800-676-2485

Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV


Dukane AV
2900 Dukane Drive
St. Charles, IL 60174

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
154
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

User guide reflexionProjection Screen

  1. 1. Reflexion Series Portable Floor Pull-up Projection Screen User’s Guide Precautions: The Reflexion portable floor pull-up projection screen series is an easy to use product that has the ability to be used as a free-standing projection screen. For best results, please read the checklist below before using the Reflexion projection screen.      Use only manufacturer approved accessories with this product. Keep this product dry and away from excessively humid operating conditions. Avoid keeping the screen in direct sunlight; it is destructive to vinyl and plastic. Do not touch the screen with sharp or abrasive objects. In order to maintain cleanliness of the screen, use mild soapy water with a soft cotton cloth and avoid unnecessary skin contact with the material.  Do not wash the screen material or its black masking with strong solvents.  Keep this product clear from an open flame or other heat sources.  The images below are an example of what not to do with the Reflexion series. Rev. 091412-JA www.elitescreens.com info@elitescreens.com 1
  2. 2. Components Set up Example of the installation bracket attached to the side of the base feet. Base Foot Bracket Installation Each installation bracket has an adjustable spring-mounted cleat that can be loosened by a “loop” or eye-bolt. Pulling on the loop releases the cleat allowing the bracket to attach to the railing and click into place on the back of the casing. Gently ease together the brackets and railing on the back of the metal casing until you hear a “click” and double-check to make sure that the connections are firm. Pull up on the spring-loaded ring to disengage the cleat on the bracket. Connect the cleat with the sliding rail on the back of the screen’s metal casing. Case Release the ring and “click” the metal casing into position with the bracket. Base Foot Screen Case Spring Cleat Bracket Center Base Foot Rev. 091412-JA www.elitescreens.com info@elitescreens.com 2
  3. 3. Detach the screen case from the base feet Pull up the loop (eye-bolt) to release the spring-cleat and tilt the projection screen’s metal casing forward away from the brackets. Lift the entire projection screen assembly up and away from the bracket/cleat assembly. Pull up the suspension loop to disengage Lift screen assembly up and away from the base foot Erecting the upright support 1. Remove the telescoping upright support from its cradle. 2. Insert the upright support into the socket on the center base foot. 3. Hang the suspension handle of the screen from either of the notches of the upright support. Rev. 091412-JA www.elitescreens.com info@elitescreens.com 3
  4. 4. 4. Twist the locking ring counter-clockwise to loosen the telescoping function of the upright support and raise the screen to its desired level. 5. Rotate the locking ring clockwise to lock the upright support at its desired height setting. 6. Here is a front view of the Reflexion projection screen when the set-up is complete. Rev. 091412-JA www.elitescreens.com info@elitescreens.com 4
  5. 5. Retracting the screen 1. Take hold of the top span of the upright support and with your free-hand, twist the locking ring in the counter-clockwise direction. This will release the lock and allow the upright support to telescope back into its compact form. 2. Lift the support handle up and out of the “notches” and guide the material back down into the casing. Release the handle when the screen material has fully retracted. 3. Rotate the locking ring clockwise to secure the upright support and remove it from the socket on the center base foot. Rev. 091412-JA www.elitescreens.com info@elitescreens.com 5
  6. 6. 4. Return the upright hook to its cradle. 5. The Reflexion is now packed and ready for its next use. For US Customer Service and Technical Support questions, please contact Elite Screens at: Telephone: (877) 511-1211 service@elitescreens.com Fax: +1-(562) 926-8433 techsupport@elitescreens.com Remember to register your product at: www.elitescreens.com/register Rev. 091412-JA www.elitescreens.com info@elitescreens.com 6

×