NanoLand & Diener come together to offer manufacturing companies enhanced surface coatings

1. NanoLandGlobal & Diener
Solutions for Surface Refinement

2. What is Nanotechnology?
Nanotechnology is the design, characterization, production and
application of structures, devices and systems by controlling
shape and size at the nanoscale (NanoDictionary Basel: Collegium Basilea 2005)
We are working at a scale where structures/materials are one
dimension below 100 nm or about 100,000 times smaller than
the width of one human hair!

3. The Global Impact of Nanotechnology
It is estimated by some analyst reports
that 10% of all jobs can be related to
nanotechnology by 2016
Michael Dell, CEO of Dell Computers,
was asked, “If you were 20 years old
and about to do it all over again, what
would you be pursuing today?” Michael
Dell answered, “Working with
Nanomaterials”

4. What Functionality Can be Offered?
We work exclusively with equipment manufacturers (including mobile phone
manufacturers)
Normally the goal is not to make the phone last forever (nor to provide protection
from complete immersion)
The goal normally is to protect the electronics from corrosion, so that the phone, etc
return rate for specific countries (eg with high humidity) is reduced to nearly zero
during the warrantee period.
We can provide customised coatings, to extend the corrosion resistance of most
products. If required we can make these completely protected from immersion.

5. The Characteristics of the Process
Coatings using a teflon-like monomers
have found widespread applications in
electronics
The coatings, applied with low pressure
plasma systems give the substrate super
hydrophobic and oleophobic properties
The coatings have become very important
in Electronics to protect against water
corrosion
We offer a complete solution including
capital equipment, consumables, together
with a unique testing technology to test
the coating thickness

6. Technical Specifications

7. How can the Coating be Tested?
We developed a process to test the coating thickness.
It uses capital equipment that has been designed
from scratch in-house.
The coating is uniform (conformal) due to the
combination of plasma and process.
The thickness of the coating can be measured on
each batch of circuits boards treated.
The coating thickness can be adjusted per batch if
this is required.

8. A One Stop Solution
We supply the process both for coating and testing
We supply the Plasma Machines
We supply the Test Machines
We supply the Consumables
We have treated over 1 Million mobile phones with
this process

9. Next Steps?
Let's open a dialog so we can demonstrate how we
can add value for your business.
Call us on +44 20 3287 9234
info@nanolandglobal.com
www.nanolandglobal.com