FAQS ON AUTOMATION
Present by
EBEES AUTOMATION SYSTEM
PVT .LTD JANAKPURI WEST
( NEW DELHI ).
AGENDA
• Automation
• Types of automation
• Need of automation
• Development of Control System
• Automation sector
• Autom...
WHAT IS AUTOMATION
Automation is the technique which is used in
control system (Industry) to operate the
equipments in se...
TYPES OF AUTOMATION
• Building Automation ( e.g. Lift ,Smoke detector )
• Office Automation (e.g. printer ,cctv cameras)
•...
BUILDING AUTOMATION
Building Automation
Building Automation
System is often refer
to as an intelligent
building “smart
bui...
OFFICE AUTOMATION
Office Automation refers to
the varied computer machinery
and software used to digitally
create, collect...
OFFICE AUTOMATION
SCIENTIFIC AUTOMATION
Scientific Automation is
the integration of automation
software with findings from
engineering scien...
ROCKET LAUNCH /SCIENTIFIC
AUTOMATION
INDUSTRIAL AUTOMATION
Industrial Automation is the
use of various control
systems for operating
equipment such as machiner...
NEED OF AUTOMATION
PLC is the Device
of Automation
Technique
WHAT IS THE NEED OF AUTOMATION
• To reduce human efforts
• To reduce production time of product
• To increase productivity...
CAN I SEE AUTOMATION IN
DAILY LIFE
There are following example in which automation is used.
 Lift move up/down automatica...
DEVELOPMENT OF CONTROL
SYSTEM
PLC control
means complete
the task
Automatic .
IN WHICH SECTOR AUTOMATION IS
USED
• Power Sector ( Transmission and Distribution)
• Filing Plants ( Coca cola , Thumps up...
CAN I LEARN AUTOMATION
COURSE
The candidate should be
B.Tech/Diploma/BSc/MSc or pursuing
B.Tech/Diploma/BSc/MSc in EEE/EC...
WHAT ARE THE SYLLABUS OF
AUTOMATION COURSE
• Basic Electrical
• Basic electronics
• PLC
• VFD
• HMI
• SCADA
• Instrumentat...
WHAT ARE THE AUTOMATION
DEVICE/SOFTWARE
• PLC (Programmable logic Controller)
• VFD( Variable Frequency Drive)
• HMI( Huma...
PROGRAMMABLE LOGIC
CONTROLLER
DEFINETION OF PLC
• PLC( Programmable Logic Controller) is the solid
state device that perform both analog and digital
sig...
WHAT WE LEARN IN PLC
• Concept of wiring with input and output device
• Creating logic on the bases of N.O/N.C concept
• C...
WHICH LANGUAGE USED TO
CREATE LOGIC
Ladder logic has evolved into
a programming language that
represents a program by a gr...
PLC LOGIC OF OR GATE
In electronics, a
logic gate is an
idealized or
physical device
implementing a
Boolean function;
that...
PLC LOGIC FOR AND/OR GATE
AND GATE behaves
according to
the truth table to the
right. A HIGH
output (1) results
only if bo...
VFD( Variable frequency Drive)
• VFD is solid state starter that perform
• To control speed of motor
• To reduce starting ...
VARIABLE FRQUENCY DRIVE
WHAT IS SCADA
• SCADA( Supervisory control and data acquisition ) is a
software .
• SCADA used to receive, monitor, and co...
TYPE OF SCADA DRAWING
In SCADA
software we
learn to create
drawing of
PLANT or Field
Process
HOW MUCH THE DURATION OF
AUTOMATION COURSE
• There are three types of modules and Summer
training program
• One month cour...
ROLE OF AUTOMATION
ENGINEER IN INDUSTRY
• As Programmer Engineer
• As Maintenance Engineer
• As Application Engineer
• As ...
COME WITH US AND GROW IN
LIFE
Thanks
To know more about Automation contact us .
EBEES AUTOMATION SYSTEM PVT.LTD
Janakpuri ...
Upcoming SlideShare
Loading in...5
×

Know More about Automation

602

Published on

EBEES AUTOMATION PVT LTD is a wholly owned subsidiary of EBEES dedicated towards services and training of Automation, Embedded, Robotics & Matlab. In case of any query, please contact.

EBEES Automation Services Pvt Ltd

Published in: Education, Business, Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
602
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
62
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Know More about Automation

  1. 1. FAQS ON AUTOMATION Present by EBEES AUTOMATION SYSTEM PVT .LTD JANAKPURI WEST ( NEW DELHI ).
  2. 2. AGENDA • Automation • Types of automation • Need of automation • Development of Control System • Automation sector • Automation device/software • Advantages • conclusion
  3. 3. WHAT IS AUTOMATION Automation is the technique which is used in control system (Industry) to operate the equipments in sequence. Or  We can say that Automation is the delegation of human control function to technical equipments
  4. 4. TYPES OF AUTOMATION • Building Automation ( e.g. Lift ,Smoke detector ) • Office Automation (e.g. printer ,cctv cameras) • Scientific automation ( e.g. rocket launch ) • Light Automation (e.g. street solar lighting ,traffic light) • Industrial Automation (e.g. bottle filing plant, steel plant, power plant oil and gas etc.)
  5. 5. BUILDING AUTOMATION Building Automation Building Automation System is often refer to as an intelligent building “smart building” or (if resident ) “smart home”.
  6. 6. OFFICE AUTOMATION Office Automation refers to the varied computer machinery and software used to digitally create, collect, store, manipulate, and relay office information needed for accomplishing basic tasks. Raw data storage, electronic transfer, and the management of electronic business information comprise the basic activities of an office automation system. Office automation helps in optimizing or automating existing office procedures..
  7. 7. OFFICE AUTOMATION
  8. 8. SCIENTIFIC AUTOMATION Scientific Automation is the integration of automation software with findings from engineering science which go beyond the limits of conventional control. The basis for this is the continually increasing performance of PCs. The power of the PC Control philosophy offers sufficient capacity to integrate numerous advanced functions beyond standard control.
  9. 9. ROCKET LAUNCH /SCIENTIFIC AUTOMATION
  10. 10. INDUSTRIAL AUTOMATION Industrial Automation is the use of various control systems for operating equipment such as machinery, processes in factories, boilers and heat treating ovens, switching in telephone networks, steering and stabilization of ships, aircraft and other applications with minimal or reduced human intervention. Some processes have been completely automated.
  11. 11. NEED OF AUTOMATION PLC is the Device of Automation Technique
  12. 12. WHAT IS THE NEED OF AUTOMATION • To reduce human efforts • To reduce production time of product • To increase productivity of product • To improve quality of product • To improve safety in working condition
  13. 13. CAN I SEE AUTOMATION IN DAILY LIFE There are following example in which automation is used.  Lift move up/down automatically after push switch.  Toll plaza gate open/close Automatically  Escalator rotate automatic in metro station /shopping mall etc.  Traffic light control system.
  14. 14. DEVELOPMENT OF CONTROL SYSTEM PLC control means complete the task Automatic .
  15. 15. IN WHICH SECTOR AUTOMATION IS USED • Power Sector ( Transmission and Distribution) • Filing Plants ( Coca cola , Thumps up, Pepsi co) • Oil and Gas ( Gail) • Pharmaceutical • Water Treatment System • FMCG Company • Lift System etc.( Shopping Mall, Metro station etc.) • And many more
  16. 16. CAN I LEARN AUTOMATION COURSE The candidate should be B.Tech/Diploma/BSc/MSc or pursuing B.Tech/Diploma/BSc/MSc in EEE/EC/IC/EI/EN branch . OR The candidate should be working in the field of respective area.
  17. 17. WHAT ARE THE SYLLABUS OF AUTOMATION COURSE • Basic Electrical • Basic electronics • PLC • VFD • HMI • SCADA • Instrumentation • Panel designing • Auto cad
  18. 18. WHAT ARE THE AUTOMATION DEVICE/SOFTWARE • PLC (Programmable logic Controller) • VFD( Variable Frequency Drive) • HMI( Human Machine Interface) • SCADA( Supervisory Control And Data Acquisition )
  19. 19. PROGRAMMABLE LOGIC CONTROLLER
  20. 20. DEFINETION OF PLC • PLC( Programmable Logic Controller) is the solid state device that perform both analog and digital signal. • PLC take input from input device( switches, sensor, Autorecloser, section analyzer) and make decision depends upon logic created by user. • After that it gives command to the output device( Motor, Valve, Power station etc.)
  21. 21. WHAT WE LEARN IN PLC • Concept of wiring with input and output device • Creating logic on the bases of N.O/N.C concept • Creating logic on the bases of Logic Gate. • Creating logic on the bases of Timer • Creating logic on the bases of Counter • Creating logic on the bases of Compare block. • Use of instruction like MCR,CALL,SBR,JMP,RET,CJ,FEND, JSR, LBL etc.
  22. 22. WHICH LANGUAGE USED TO CREATE LOGIC Ladder logic has evolved into a programming language that represents a program by a graphical diagram based on the circuit diagrams of relay logic hardware. Ladder logic is used to develop software for programmable logic controllers (PLCs) used in industrial control applications. The name is based on the observation that programs in this language resemble ladders, with two vertical rails and a series of horizontal rungs between them.
  23. 23. PLC LOGIC OF OR GATE In electronics, a logic gate is an idealized or physical device implementing a Boolean function; that is, it performs a logical operation on one or more logical inputs, and produces a single logical output
  24. 24. PLC LOGIC FOR AND/OR GATE AND GATE behaves according to the truth table to the right. A HIGH output (1) results only if both the inputs to the AND gate are HIGH (1). If neither or only one input to the AND gate is HIGH, a LOW output results.
  25. 25. VFD( Variable frequency Drive) • VFD is solid state starter that perform • To control speed of motor • To reduce starting voltage • To change the direction of motor either in forward or reverse . • To measure the voltage/current/frequency/speed of motor.
  26. 26. VARIABLE FRQUENCY DRIVE
  27. 27. WHAT IS SCADA • SCADA( Supervisory control and data acquisition ) is a software . • SCADA used to receive, monitor, and control the field data at remote location with the help of controller (PLC). • SCADA software is installed in computer and communicate with PLC .
  28. 28. TYPE OF SCADA DRAWING In SCADA software we learn to create drawing of PLANT or Field Process
  29. 29. HOW MUCH THE DURATION OF AUTOMATION COURSE • There are three types of modules and Summer training program • One month course modules • Two month course modules • Three month course modules • Summer training for B.Tech/Diploma pursuing students
  30. 30. ROLE OF AUTOMATION ENGINEER IN INDUSTRY • As Programmer Engineer • As Maintenance Engineer • As Application Engineer • As Service Engineer • As Site Engineer • As Project Engineer • As Sales Engineer
  31. 31. COME WITH US AND GROW IN LIFE Thanks To know more about Automation contact us . EBEES AUTOMATION SYSTEM PVT.LTD Janakpuri West New Delhi Mob:- 08510014073/74
  1. A particular slide catching your eye?

    Clipping is a handy way to collect important slides you want to go back to later.

×