Your SlideShare is downloading. ×
2004 TITAN OWNER'S MANUAL
Upcoming SlideShare
Loading in...5
×

Thanks for flagging this SlideShare!

Oops! An error has occurred.

×

Introducing the official SlideShare app

Stunning, full-screen experience for iPhone and Android

Text the download link to your phone

Standard text messaging rates apply

2004 TITAN OWNER'S MANUAL

373
views

Published on

Classic Cars Nissan offers you excellent sales and service on new or used Nissan vehicles. Stop in and test drive a Nissan 2004 TITAN or any car or truck today! We're located Hainesport New Jersey …

Classic Cars Nissan offers you excellent sales and service on new or used Nissan vehicles. Stop in and test drive a Nissan 2004 TITAN or any car or truck today! We're located Hainesport New Jersey between Cherry Hill and Mount Holly. Only 20 minutes from Philadelphia. Classic Cars Nissan 1513 Route 38 Hainesport, NJ 08036 866-CLASSIC or 866-252-7742

Published in: Automotive, Sports, Business

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
373
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

Report content
Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
No notes for slide

Transcript

  • 1. The inside pages of this manual containFOREWORD READ FIRST—THEN DRIVE SAFELY a minimum of 50% recycled fibers, including 10% post-consumer fibers.Welcome to the growing family of new NISSAN Before driving your vehicle please read this Own- As with other vehicles with features forowners. This vehicle is delivered to you with er’s Manual carefully. This will ensure familiarity off-road use, failure to operate four-wheelconfidence. It was produced using the latest with controls and maintenance requirements, as- drive models correctly may result in loss oftechniques and strict quality control. sisting you in the safe operation of your vehicle. control or an accident. Be sure to read “Driving safety precautions” in the “Start-This manual was prepared to help you under- WARNING ing and driving” section of this manual.stand the operation and maintenance of yourvehicle so that you may enjoy many miles (kilome- IMPORTANT SAFETY INFORMATION RE- ON-PAVEMENT AND OFF-ROAD DRIVINGters) of driving pleasure. Please read through this MINDERS FOR SAFETY!manual before operating your vehicle. This vehicle will handle and maneuver Follow these important driving rules to differently from an ordinary passengerA separate Warranty Information Booklet help ensure a safe and comfortable trip car because it has a higher center ofexplains details about the warranties cov- for you and your passengers! gravity for off-road use. As with otherering your vehicle. The “NISSAN Service vehicles with features of this type, fail- ● NEVER drive under the influence of al-and Maintenance Guide” explains details ure to operate this vehicle correctly may cohol or drugs.about maintaining and servicing your ve- result in loss of control or an accident.hicle. Additionally, a separate Customer ● ALWAYS observe posted speed limits and never drive too fast for conditions. Be sure to read “On-pavement and off-Care/Lemon Law Booklet (U.S. only) will road driving precautions”, and “Avoid-explain how to resolve any concerns you ● ALWAYS use your seat belts and appro- ing collision and rollover”, and “Drivingmay have with your vehicle, as well as priate child restraint systems. Pre-teen safety precautions”, in the “Starting andclarify your rights under your state’s lemon children should be seated in the rear driving” section of this manual.law. seat.Your NISSAN dealership knows your vehicle ● ALWAYS provide information about thebest. When you require any service or have any MODIFICATION OF YOUR VEHICLE proper use of vehicle safety features toquestions, they will be glad to assist you with the all occupants of the vehicle. This vehicle should not be modified. Modi-extensive resources available to them. fication could affect its performance, ● ALWAYS review this owner’s manual for safety or durability, and may even violate important safety information. governmental regulations. In addition, For descriptions specified for four-wheel drive damage or performance problems result- models, a mark is placed at the begin- ing from modifications may not be cov- ning of the applicable sections/items. ered under NISSAN warranties. ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 2. The inside pages of this manual containWHEN READING THE MANUAL a minimum of 50% recycled fibers, including 10% post-consumer fibers.This manual includes information for all options CALIFORNIA PROPOSITION 65available on this model. Therefore, you may find WARNINGsome information that does not apply to yourvehicle. WARNINGAll information, specifications and illustrations in Engine exhaust, some of its constituents,this manual are those in effect at the time of and certain vehicle components containprinting. NISSAN reserves the right to change or emit chemicals known to the State ofspecifications or design without notice and with- California to cause cancer and birth de-out obligation. fects or other reproductive harm. In addi-IMPORTANT INFORMATION ABOUT tion, certain fluids contained in vehiclesTHIS MANUAL and certain products of component wear contain or emit chemicals known to theYou will see various symbols in this manual. They State of California to cause cancer andare used in the following ways: APD1005 birth defects or other reproductive harm. If you see this symbol, it means “Do not do this” WARNING or “Do not let this happen.”This is used to indicate the presence of ahazard that could cause death or seriouspersonal injury. To avoid or reduce the If you see a symbol similar to these in an illustra-risk, the procedures must be followed tion, it means the arrow points to the front of theprecisely. vehicle. © 2003 NISSAN NORTH AMERICA, INC. GARDENA, CALIFORNIA CAUTION All rights reserved. No part of this Owner’sThis is used to indicate the presence of a Arrows in an illustration that are similar to these Manual may be reproduced or stored in a retrievalhazard that could cause minor or moder- indicate movement or action. system, or transmitted in any form, or by anyate personal injury or damage to your ve- means, electronic, mechanical, photocopying,hicle. To avoid or reduce the risk, the pro- recording or otherwise, without the prior writtencedures must be followed carefully. Arrows in an illustration that are similar to these permission of Nissan North America, Inc., Gar- call attention to an item in the illustration. dena, California. ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 3. WELCOME TO THE WORLD OF NISSAN NISSAN pioneered the use of electronics and com- puters in automobiles, and has led the industry in improving both performance and fuel efficiency through new engine designs and the use of syn- thetic materials to reduce vehicle weight. The com- pany has also developed ways to build quality into its vehicles at each stage of the production process, both through extensive use of automation and — most importantly — through an awareness that people are the central element in quality control. From the time the parts arrived from our suppliers until you took delivery of your new NISSAN, dozens of checks were made to ensure that only the best job was being done in producing and delivering your vehicle. NISSAN also takes great care to ensure that when you take your NISSAN to your dealer for WFW0014 maintenance, the service technician will perform his work according to the quality standards that haveYour new NISSAN is the result of our dedication to styling design at Nissan Design America, Inc. in San been established by NISSAN.produce the finest in safe, reliable and economical Diego, California, and engineering at Nissan Tech-transportation. Your vehicle is the product of a suc- nical Center North America in Farmington Hills, Safety has also been built into your NISSAN. As youcessful worldwide company that manufactures cars Michigan. Additionally, NISSAN employs more than know, seat belts are an integral part of the safetyand trucks in over 17 countries and distributes them 21,000 people throughout the United States, systems that will help protect you and your passen-in 170 nations. Canada, and Mexico. An additional 60,000 people gers in the event of a sudden stop or an accident. work for the 1,250 NISSAN and INFINITI dealers We urge you to use the seat belts every time youNISSAN vehicles are designed and manufactured drive the vehicle.by Nissan Motor Co., Ltd. which was founded in across North America.Tokyo, Japan in 1933, and NISSAN affiliates world- The NISSAN story of growth and achievement re-wide, collectively growing to become the fifth largest NISSAN is also a substantial contributor to the flects our major goal: to provide you, our customer,automaker in the world. In addition to cars and Canadian economy. Nissan Canada Inc., its suppli- with a vehicle that is built with quality and craftsman-trucks, NISSAN also makes forklift trucks, marine ers and over 150 dealers employ approximately ship — a product that we can be proud to build andengines, boats and other diversified products. 4,500 people. These include company employees you can be proud to own. and the staffs of NISSAN dealers all across Canada.NISSAN has made a substantial and growing in- In addition, many Canadians work for companiesvestment in North America. NISSAN’s commitment that supply NISSAN and NISSAN dealers with ma-is over $6 billion dollars in capital investments in terials and services ranging from the operation offacilities across the continent. Some of the facilities port facilities and transportation services, to theinclude the Nissan Manufacturing facilities in Can- supply of lubricants, parts and accessories.ton, Mississippi and in Smyrna, Tennessee, vehicle ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 4. NISSAN CUSTOMER CARE PROGRAMNISSAN CARES . . .Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN dealer areour primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs.However, if there is something that your NISSAN The Consumer Affairs Department will ask for the You can write to NISSAN with the information at:dealer cannot assist you with or you would like to following information:provide NISSAN directly with comments or ques- For U.S. mainland and Alaska customerstions, please contact the NISSAN Consumer Affairs – Your name, address, and telephone number Nissan North America, Inc.Department using our toll-free number: Consumer Affairs Department – Vehicle identification number (attached to the P.O. Box 191For U.S. mainland and Alaska customers top of the instrument panel on the driver’s Gardena, California 90248-0191 1-800-NISSAN-1 side) (1-800-647-7261) For Hawaii customers – Date of purchase Nissan Motor Corporation in HawaiiFor Hawaii customers 2880 Kilihau St. – Current odometer reading 1-808-836-0888 (Oahu Number) Honolulu, Hawaii 96819 – Your NISSAN dealer’s nameFor Canadian customers For Canadian customers 1-800-387-0122 – Your comments or questions Nissan Canada Inc. OR 5290 Orbitor Drive Mississauga, Ontario L4W 4Z5 We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle. ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 5. Table of Illustrated table of contents 0Contents Safety—Seats, seat belts and supplemental air bags 1 Instruments and controls 2 Pre-driving checks and adjustments 3 Display screen, heater, air conditioner and audio systems 4 Starting and driving 5 In case of emergency 6 Appearance and care 7 Maintenance and do-it-yourself 8 Technical and consumer information 9 Index 10
  • 6. ੬ REVIEW COPY:—2004 Titan (tzw)Owners Manual (owners)—USA English (nna)09/11/03—debbie ੭
  • 7. 0 Illustrated table of contentsAirbags, seat belts and child restraints . . . . . . . . . . . . . . . 0-2 Instrument panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-6Exterior front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-3 Engine compartment locations . . . . . . . . . . . . . . . . . . . . . . 0-8Exterior rear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-4 Warning/indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-9Passenger compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-5 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 8. AIRBAGS, SEAT BELTS AND CHILDRESTRAINTS 1. 2nd row seat belts (P. 1-27) 2. Supplemental curtain side-impact and rollover air bags (P. 1-10) 3. Front seat belts (P. 1-27) 4. Supplemental front impact air bags (P.1-10) 5. Seats (P. 1-2) 6. Occupant classification sensor (weight sensor) (P.1-20) 7. Seat belt pretensioners (P. 1-24) 8. Supplemental side impact air bag (if so equipped) (P. 1-10) 9. LATCH (Lower Anchors and Tethers for CHildren) (P. 1-43) 10. Top tether strap anchor point (P. 1-45) See the page number indicated in paren- theses for operating details. LII00280-2 Illustrated table of contents ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 9. EXTERIOR FRONT 1. Engine hood (P. 3-11) 2. Windshield wiper and washer switch (P. 2-22) 3. Windshield (P. 8-19) 4. Sunroof (if so equipped) (P.2-43) 5. Power windows (P. 2-40) 6. Door locks, keyfob, keys (P. 3-3, 3-7, 3-2) 7. Mirrors (P. 3-15) 8. Tire pressure (P. 9-11) 9. Flat tire (P. 6-2) 10. Tire chains (P. 8-36) 11. Replacing bulbs (P. 8-27) 12. Headlight and turn signal switch (P. 2-23) 13. Fog light switch (P. 2-26) 14. Tow hooks (P. 6-13) See the page number indicated in paren- theses for operating details. LII0030 Illustrated table of contents 0-3 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 10. EXTERIOR REAR 1. Rear sliding window (if so equipped) (P.2-43) 2. Vehicle loading (P. 9-12) 3. Tailgate/Truckbox (P.3-19) 4. Trailer hitch/Towing (if so equipped) (P.9-21) 5. Replacing bulbs (P. 8-27) 6. Bedside storage compartment (P.2-40) 7. Fuel filler cap, fuel recommendation (P. 3-11, P. 9-3) 8. Fuel filler door (P. 3-11) 9. Child safety rear door lock (Crew Cab models only) (P. 3-6) See the page number indicated in paren- theses for operating details. LII00270-4 Illustrated table of contents ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 11. PASSENGER COMPARTMENT 1. DVD entertainment system (if so equipped) (P. 4-38) 2. Sunroof (if so equipped) (P. 2-43) 3. Map lights (P. 2-47) 4. Sun visors (P. 3-14) 5. HomeLinkா (P. 2-47) 6. Glove box (P. 2-34) 7. Cup holders (P. 2-37) 8. Front seats (P. 1-2) 9. Folding rear bench seat (P.1-9) See the page number indicated in paren- theses for operating details. LII0029 Illustrated table of contents 0-5 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 12. INSTRUMENT PANEL 1. Driver, center and passenger vents (P. 4-11) 2. Instrument brightness control (P. 2-25) 3. Headlight and turn signal switch (P. 2-23) 4. Steering wheel switch for audio control (if so equipped) (P. 4-36) 5. Driver supplemental air bag/horn (P. 1-10, P. 2-27) 6. Meters, gauges and warning/indicator lights (P. 2-3, 2-12) 7. Cruise control main/set switches (P. 5-17) 8. Windshield wiper/washer switch (P. 2-22) 9. Ignition switch (P. 5-7) 10. Navigation system* (if so equipped) (P. 4-2) 11. Navigation system* controls (if so equipped) (P. 4-2) 12. Audio system controls (P. 4-19) 13. Front passenger supplemental air bag (P. 1-10) 14. Glove box (P. 2-34) 15. Climate controls (P. 4-12) 16. Aux jack (P. 4-35) WIC06480-6 Illustrated table of contents ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 13. 17. Heated seat switch (if so equipped) (P. 2-28)18. Power outlet (P. 2-30)19. Vehicle dynamic control (VDC) off switch (if so equipped) (P. 2-29)20. Tow mode switch (P. 2-30)21. Shift selector lever (console) (if so equipped) (P. 5-9)22. Passenger air bag status light (P. 2-17)23. Hazard lights (P. 2-26)24. 4WD shift switch (if so equipped) (P.5-20)25. Shift selector lever (column) (if so equipped) (P. 5-9)26. Instrument brightness control (P. 2-25)27. Tilt steering wheel control (P. 3-13)28. Cargo lamp switch (P. 2-27)29. Rear sonar system off switch (if so equipped) (P. 2-29)30. Pedal position adjustment switch (if so equipped) (P. 3-13)*: Refer to the separate Navigation SystemOwner’s Manual (if so equipped).See the page number indicated in paren-theses for operating details. Illustrated table of contents 0-7 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 14. ENGINE COMPARTMENT LOCATIONS 1. Battery (P. 8-13) 2. Fuse/fusible link box (P. 8-21) 3. Transmission dipstick (P. 8-11) 4. Engine oil filler cap (P. 8-8) 5. Brake fluid reservoir (P. 8-12) 6. Windshield washer fluid reservoir (P. 8-13) 7. Air cleaner (P. 8-16) 8. Radiator cap (P. 8-7) 9. Power steering fluid reservoir (P. 8-11) 10. Engine oil dipstick (P. 8-8) 11. Coolant reservoir (P. 8-7) See the page number indicated in paren- theses for operating details. LDI03680-8 Illustrated table of contents ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 15. WARNING/INDICATOR LIGHTS Warning Name Page Warning Name Page Warning Name Page light light light Charge warning 2-14 Low tire pres- 2-15 Anti-lock brake 2-13 light sure warning or warning light light Door open 2-14 warning light Low washer 2-16 Automatic 2-13 fluid warning Engine oil pres- 2-14 transmission light sure low/engine check warning coolant tem- Seat belt warn- 2-16 light perature high ing light and Automatic 2-13 warning light chime transmission 4WD warning 2-14 Supplemental 2-16 park warning light ( air bag warning light ( model) light model) Low fuel warn- 2-15 Brake warning 2-13 ing light or light Illustrated table of contents 0-9 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 16. Indicator Name Page Indicator Name Page Indicator Name Page light light light 4WD shift indi- 2-17 Slip indicator 2-18 Automatic 2-16 cator light light (if so transmission ( equipped) position indica- model) Transfer 4LO 2-18 tor light Front passenger 2-17 position indica- Brake limited- 2-17 or air bag status tor light slip differential light ( indicator light model) (if so equipped) High beam in- 2-17 Turn 2-19 Cruise main 2-17 dicator light signal/hazard switch indicator (Blue) indicator lights light Malfunction 2-17 Vehicle dy- 2-19 Cruise set 2-17 indicator lamp namic control switch indicator (MIL) off indicator light light (if so Security indica- 2-18 equipped) tor light (NVIS)0-10 Illustrated table of contents ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 17. 1 Safety—Seats, seat belts andsupplemental air bagsSeats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Pregnant women . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-30 Front manual captain’s chair seat adjustment Injured persons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-30 (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Three-point type seat belt with retractor . . . . . . . . . . 1-31 Front manual bench seat adjustment Two-point type seat belt without retractor (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 (center of the front bench seat) (if so Front power seat adjustment equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-34 (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Seat belt extenders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-35 Head restraint adjustment . . . . . . . . . . . . . . . . . . . . . . . 1-6 Seat belt maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 1-36 Armrests (if so equipped). . . . . . . . . . . . . . . . . . . . . . . . 1-7 Child restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-36 Flexible seating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Precautions on child restraints . . . . . . . . . . . . . . . . . . 1-36Supplemental restraint system . . . . . . . . . . . . . . . . . . . . . 1-10 Installation on rear bench seat . . . . . . . . . . . . . . . . . . 1-38 Precautions on supplemental restraint LATCH (Lower Anchors and Tethers for system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 CHildren) system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-43 Supplemental air bag warning labels . . . . . . . . . . . . . 1-25 Top tether strap child restraint . . . . . . . . . . . . . . . . . . 1-45 Supplemental air bag warning light . . . . . . . . . . . . . . 1-26 Installation on front passenger seat outboardSeat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-27 position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-46 Precautions on seat belt usage. . . . . . . . . . . . . . . . . . 1-27 Installation on front bench passenger seat Child safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-29 center position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-49 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 18. SEATS FRONT MANUAL CAPTAIN’S CHAIR SEAT ADJUSTMENT (if so equipped) WARNING ● Do not adjust the driver’s seat while driving so full attention may be given to vehicle operation. The seat may move suddenly and could cause loss of con- trol of the vehicle. ● After adjustment, gently rock in the seat to make sure it is securely locked. ARS1152 WARNING ● For the most effective protection when the vehicle is in motion, the seat should● Do not ride in a moving vehicle when be upright. Always sit well back in the the seatback is reclined. This can be seat and adjust the seat properly. See dangerous. The shoulder belt will not “Precautions on Seat Belt Usage” later be against your body. In an accident, in this section. you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries.1-2 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 19. WARNING After adjustment, gently rock in the seat to make sure it is securely locked. FRONT MANUAL BENCH SEAT ADJUSTMENT (if so equipped) WARNING ● Do not adjust the driver’s seat while driving so full attention may be given to vehicle operation. The seat may move suddenly and could cause loss of con- trol of the vehicle. LRS0419 LRS0420 ● After adjustment, gently rock in the seatForward and backward Reclining to make sure it is securely locked.Pull the lever up and hold it while you slide the To recline the seatback, pull the lever up and leanseat forward or backward to the desired position. back. To bring the seatback forward, pull the leverRelease the lever to lock the seat in position. up and lean your body forward. Release the lever to lock the seatback in position. The reclining feature allows adjustment of the seatback for occupants of different sizes to help obtain proper seat belt fit (see “Precautions on seat belt usage” later in this section). Also, the seatback can be reclined to allow occupants to rest when the vehicle is stopped. Safety—Seats, seat belts and supplemental air bags 1-3 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 20. WARNING After adjustment, gently rock in the seat to make sure it is securely locked. LRS0426 LRS0427Forward and backward RecliningPull the lever up and hold it while you slide the To recline the seatback, pull the lever up and leanseat forward or backward to the desired position. back. To bring the seatback forward, pull the leverRelease the lever to lock the seat in position. up and lean your body forward. Release the lever to lock the seatback in position. The reclining feature allows adjustment of the seatback for occupants of different sizes to help obtain proper seat belt fit (see “Precautions on seat belt usage” later in this section). Also, the seatback can be reclined to allow occupants to rest when the vehicle is stopped.1-4 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 21. ● Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery. See “Automatic drive positioner (if so equipped)” in “Pre-driving checks and adjustments” for auto- matic drive positioner operation. Forward and backward Moving the switch forward or backward will slide the seat forward or backward to the desired position. Reclining WRS0276 Move the recline switch backward until the de- sired angle is obtained. To bring the seatbackFRONT POWER SEAT ● Do not leave children unattended inside forward again, move the switch forward andADJUSTMENT (if so equipped) the vehicle. They could unknowingly ac- move your body forward. The seatback will move tivate switches or controls and become forward. WARNING trapped in a window. Unattended chil- dren could become involved in serious The reclining feature allows adjustment of the● Do not adjust the driver’s seat while accidents. seatback for occupants of different sizes to help driving so full attention may be given to obtain proper seat belt fit (see “Precautions on vehicle operation. The seat may move Operating tips seat belt usage” later in this section). Also, the suddenly and could cause loss of con- seatback can be reclined to allow occupants to trol of the vehicle. ● The power seat motor has an auto-reset rest when the vehicle is stopped. overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. Safety—Seats, seat belts and supplemental air bags 1-5 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 22. WRS0277 LRS0278 LRS0286Seat lifter (if so equipped for driver’s Lumbar support (driver’s seat) HEAD RESTRAINT ADJUSTMENTseat) The lumbar support feature provides lower back To raise the head restraint, pull it up. To lower,Push the front or rear end of the switch up or support to the driver. Move the lever up or down push and hold the lock knob and push the headdown to adjust the angle and height of the seat to adjust the seat lumbar area. restraint down.cushion. The head restraints on the rear bench seat are removable. The front seat head restraints are not removable.1-6 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 23. WARNINGHead restraints should be adjusted prop-erly as they may provide significant pro-tection against injury in an accident. Donot remove them. Check the adjustmentafter someone else uses the seat. WRS0134 WRS0368 Adjust the head restraint so the center is level Type A with the center of your ears. ARMRESTS (if so equipped) To use the armrests on the captain’s chairs (type A, if so equipped), pull them down to the resting position. To use the center armrest on the bench seat (type B, if so equipped), pull on the tab in the center of the seat and fold it down to the resting position. Safety—Seats, seat belts and supplemental air bags 1-7 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 24. LRS0425 LRS0341 LRS0342 Type B FLEXIBLE SEATING ᭺ 2 Lift up on the latch located on the upper corner of the seatback to release the back of Folding the front passenger’s seatback the seat. This will enable you to fold the front flat (if so equipped) passenger seatback flat over the seat cush- To fold the front passenger’s seatback flat for ion. extra storage length when transporting long 3. To return the front passenger’s seat to a items: seating position lift up on the seatback and ᭺ 1 Slide the seat to the rear-most position. push it up to an upright position. Then pull up on the recline lever and lean the seatback to Then lift up on the recline lever, located on the outside of the seat, and fold the seatback a proper seating position. Release the lever forward as far as it will go. to lock the seatback in position.1-8 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 25. WARNING● If you fold the front passenger’s seat- back flat forward to carry longer ob- jects, be sure this cargo is properly se- cured and not near an air bag. In a crash, an inflating air bag might force that object toward a person. This could cause severe injury or even death. Se- cure objects away from the area in which an air bag would inflate. See & “Precautions on supplemental restraint system” later in this section.● When returning the seatbacks to the upright position, be certain they are LRS0398 LRS0399 completely secured in the latched posi- Folding the rear bench seat ᭺ 2 Fold the bottom of the seat cushion toward tion. If they are not completely secured, the back of the vehicle until it locks in place. passengers may be injured in an acci- To fold the rear bench seat up for storage capac- dent or sudden stop. ity behind the front seats or to remove the jacking tools from the storage area:● Never allow anyone to ride in the cargo area or on the front passenger’s seat ᭺ 1 Lift up on the lever, located on the side of the when it is in the fold-down position. Use seat, while lifting the front of the seat cushion of these areas by passengers could re- up. sult in serious injury in an accident or sudden stop. Safety—Seats, seat belts and supplemental air bags 1-9 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 26. SUPPLEMENTAL RESTRAINT SYSTEM WARNING PRECAUTIONS ON ● When the vehicle is being used to carry SUPPLEMENTAL RESTRAINT cargo, properly secure all cargo to help SYSTEM prevent it from sliding or shifting. Do This Supplemental Restraint System (SRS) sec- not place cargo higher than the seat- tion contains important information concerning backs. In a sudden stop or collision, the driver and passenger supplemental front air unsecured cargo could cause personal bags (NISSAN Advanced Air Bag System), injury. supplemental side air bags, curtain side-impact ● Do not allow people to ride in any area and rollover air bags and pre-tensioner seat belts. of your vehicle that is not equipped with seats and seat belts. Be sure everyone Supplemental front impact air bag system: in your vehicle is in a seat and using a The NISSAN advanced air bag system can help seat belt properly. Never ride in the rear cushion the impact force to the head and chest of LRS0400 seat unless the seat bottom cushions the driver and right front, passenger in certain᭺3 Repeat this process to raise and secure the are in place and latched. frontal collisions. seat cushion on the other side of the vehicle ● When returning the seatbacks to the Supplemental side-impact air bag system for maximum storage capacity. upright position, be certain they are (if so equipped): This system can help cushionTo return the rear bench seat to a seating position completely secured in the latched posi- the impact force to the chest area of the driverreverse the process. Make sure to properly tion. If they are not completely secured, and right front, passenger in certain side impactpush the seat cushion down into place. passengers may be injured in an acci- collisions. The supplemental side air bag is de- dent or sudden stop. signed to inflate on the side where the vehicle is impacted. Supplemental curtain side-impact and roll- over air bag system: This system can help cushion the impact force to the head of occu- pants in front and rear outboard seating positions in certain side impact or rollover collisions. In a side impact, the curtain air bags are designed to inflate on the side where the vehicle is impacted.1-10 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 27. In a rollover both curtain air bags are designed toinflate and remain inflated for a short time.These supplemental restraint systems are de-signed to supplement the crash protection pro-vided by the seat belts and are not a substitutefor them. Seat belts should always be correctlyworn and the occupant seated a suitable dis-tance away from the steering wheel, instrumentpanel and door finishers. See “Seat belts” later inthis section for instructions and precautions onseat belt usage.The supplemental air bags operate onlywhen the ignition switch is in the ON orSTART position. WRS0031After turning the ignition key to the ON WARNINGposition, the supplemental air bag warninglight illuminates. The supplemental air bag ● The supplemental front air bags ordi-warning light will turn off after about 7 narily will not inflate in the event of aseconds if the system is operational. side impact, rear impact, rollover, or lower severity frontal collision. Also, the right front passenger air bag will not inflate if the passenger air bag status light is lit. See “Front passenger air bag and status light” later in this section. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. Safety—Seats, seat belts and supplemental air bags 1-11 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 28. ● The seat belts and the supplemental ● The right front passenger seat is front air bags are most effective when equipped with an occupant classifica- you are sitting well back and upright in tion sensor (weight sensor) that turns the seat. The front air bags inflate with the right front passenger air bag OFF great force. Even with the NISSAN ad- under some conditions. This sensor is vanced air bag system, if you are unre- only used in this seat. Failure to be strained, leaning forward, sitting side- properly seated and wearing the seat ways or out of position in any way, you belt can increase the risk or severity of are at greater risk of injury or death in a injury in an accident. See “Front Pas- crash. You may also receive serious or senger air bag and status light” later in fatal injuries from the supplemental this section. front air bag if you are up against it ● Keep hands on the outside of the steer- when it inflates. Always sit back against ing wheel. Placing them inside the the seatback and as far away as practi- steering wheel rim could increase the cal from the steering wheel or instru- risk that they are injured when the ment panel. Always use the seat belts. supplemental front air bag inflates.● The driver and right front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The advanced air bag system monitors the severity of a collision and seat belt usage then inflates the air bags. Failure to properly wear seat belts can increase the risk or severity of injury in an accident.1-12 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 29. ARS1133 ARS1041 WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations.Safety—Seats, seat belts and supplemental air bags 1-13੬ REVIEW COPY:—2004 Titan (tzw)Owners Manual (owners)—USA English (nna)09/11/03—debbie ੭
  • 30. ARS1042 ARS1043 ARS1044 WARNING● Children may be severely injured or killed when the supplemental front air bags, side air bags or curtain side- impact and rollover air bags inflate if they are not properly restrained. Pre- teens and children should be properly restrained in the rear seat, if possible.1-14 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 31. ARS1045 WRS0256 SSS0101 WARNING WARNING ● Even with the NISSAN Advanced Air Supplemental side air bag (if so equipped) Bag System, never install a rear-facing and curtain side-impact and rollover air child restraint in the front seat. An in- bag: flating supplemental front air bag could ● The supplemental side air bag and cur- seriously injure or kill your child. See tain side-impact and rollover air bag “Child restraints” later in this section ordinarily will not inflate in the event of for details. a frontal impact, rear impact, or lower severity side collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. Safety—Seats, seat belts and supplemental air bags 1-15 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 32. WARNING ● The seat belts, the supplemental side air bags and curtain side-impact and rollover air bags are most effective when you are sitting well back and up- right in the seat. The side air bag and curtain air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front seat or near the side roof rails. Do not allow anyone sitting in the front seats or rear outboard seats to extend their LRS0396 SSS0162 hand out of the window or lean against Do not lean against doors or windows. Do not lean against doors or windows. the door. Some examples of dangerous riding positions are shown in the previ- ous illustrations.1-16 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 33. LRS0421 SSS0159 WARNING● When sitting in the rear seat, do not hold onto the seatback of the front seat. If the side air bag inflates, you may be seriously injured. Be especially careful with children, who should always be properly restrained. Some examples of dangerous riding positions are shown in the illustrations.● Do not use seat covers on the front seatbacks. They may interfere with supplemental side air bag inflation. Safety—Seats, seat belts and supplemental air bags 1-17 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 34. 1. SRS curtain side-impact and rollover air bag modules 2. SRS curtain side-impact and rollover air bag 3. Diagnosis sensor unit 4. Supplemental front air bag modules 5. Crash zone sensor 6. Occupant classification system control unit 7. Occupant classification sensor 8. Seat belt buckle switches 9. Pre-tensioner retractor 10. Satellite sensors 11. Supplemental side air bag modules (if so equipped) NISSAN Advanced Air Bag System (front seats) This vehicle is equipped with the NISSAN ad- vanced air bag system for the driver and right front passenger seats. This system is designed to meet certification requirements under U.S. regu- lations. It is also permitted in Canada. However, all of the information, cautions and warn- ings in this manual still apply and must be followed. The driver supplemental front air bag is located in WRS0405 the center of the steering wheel. The passenger1-18 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 35. supplemental front air bag is mounted in the status light” later in this section for further details. to help protect the front occupants. Because ofdashboard above the glove box. The supplemen- One front air bag inflating does not indicate im- this, the force of the front air bag inflating cantal front air bags are designed to inflate in higher proper performance of the system. increase the risk of injury if the occupant is tooseverity frontal collisions, although they may in- close to, or is against, the front air bag module If you have any questions about your air bag during inflation.flate if the forces in another type of collision are system, please contact NISSAN or your NISSANsimilar to those of a higher severity frontal impact. The front air bags deflate quickly after a collision. dealer. If you are considering modification of yourThey may not inflate in certain frontal collisions. vehicle due to a disability, you may also contact The supplemental front air bags operateVehicle damage (or lack of it) is not always an NISSAN. Contact information is contained in the only when the ignition switch is in the ONindication of proper supplemental front air bag beginning of this Owner’s Manual.system operation. or START position. When a supplemental front air bag inflates, a After turning the ignition key to the ONThe NISSAN advanced air bag system has dual fairly loud noise may be heard, followed by the position, the supplemental air bag warningstage inflators. It also monitors information from release of smoke. This smoke is not harmful and light illuminates. The supplemental air bagthe crash zone sensor, the diagnosis sensor unit, does not indicate a fire. Care should be taken to warning light will turn off after about 7seat belt buckle sensors, occupant classification not inhale it, as it may cause irritation and chok- seconds if the system is operational.sensor (weight sensor) and right front passenger ing. Those with a history of a breathing conditionseat belt tension sensor. Inflator operation is should get fresh air promptly.based on the severity of a collision and seat belt Supplemental front air bags, along with the use ofusage for the driver. For the right front passenger, seat belts, help to cushion the impact force onit additionally monitors the weight of an occupant the face and chest of the driver and right frontor object on the seat and seat belt tension. Based passenger. They can help save lives and reduceon information from the sensors, only one front air serious injuries. However, an inflating front airbag may inflate in a crash, depending on the bag may cause facial abrasions or other injuries.crash severity and whether the front occupants Front air bags do not provide restraint to theare belted or unbelted. Additionally, the front lower body.passenger air bag may be automatically turnedOFF under some conditions, depending on the Even with NISSAN advanced air bags, seat beltsweight detected on the passenger seat and how should be correctly worn and the driver and pas-the seat belt is used. If the front passenger air bag senger seated upright as far as practical awayis OFF, the passenger air bag status light will be from the steering wheel or instrument panel. Theilluminated. See “Front passenger air bag and supplemental front air bags inflate quickly in order Safety—Seats, seat belts and supplemental air bags 1-19 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 36. ated under some conditions as described below in accordance with U.S. regulations. If the front passenger air bag is OFF, it will not inflate in a crash. The driver air bag and other air bags in your vehicle are not part of this system. The purpose of the regulation is to help reduce the risk of injury or death from an inflating air bag to certain front passenger seat occupants, such as children, by requiring the air bag to be auto- matically turned OFF. Certain sensors are used to meet the requirements. One sensor used is the occupant classification sensor (weight sensor). It is in the bottom of the LRS0351 LRS0316 right front passenger seat cushion and is de-Front passenger air bag and status light The right front passenger air bag status signed to detect an occupant and objects on the light or is located under the climate right front seat by weight. It works together with WARNING controls. It will illuminate to indicate that the front seat belt sensors described later. For example, if passenger air bag is OFF and will not inflate in a a child is in the right front passenger seat, theThe right front passenger air bag is de-signed to automatically turn OFF under crash. The light will illuminate if the front passen- advanced air bag system is designed to turn thesome conditions. Read this section care- ger seat is unoccupied or when other conditions passenger air bag OFF in accordance with thefully to learn how it operates. Proper use are met as outlined in this section. After turning regulations. Also, if a child restraint of the typeof the seat, seat belt and child restraints is the ignition key to the ON position the front specified in the regulations is on the seat, itsnecessary for most effective protection. passenger air bag status light illuminates and will weight and the child’s weight can be detectedFailure to follow all instructions in this turn off after about 7 seconds if the system is and cause the air bag to turn OFF. Weight sensormanual concerning the use of seats, seat operational. operation can vary depending on the right frontbelts and child restraints can increase the passenger seat belt sensors. Front passenger air bagrisk or severity of injury in an accident. The right front passenger seat belt sensors are The right front passenger air bag is designed to designed to detect if the seat belt is buckled andStatus light automatically turn OFF when the vehicle is oper- the amount of tension on the seat belt, such as1-20 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 37. when it is in the automatic locking mode (child passenger air bag OFF for specified child re- that the person is a small adult, or is not sitting onrestraint mode). Based on the weight on the seat straints as required by the regulations. Failing to the seat or using the right front seat belt properly.detected by the weight sensor and the belt ten- properly secure child restraints and to use the If a child restraint must be used in the right frontsion detected on the seat belt, the advanced air automatic locking mode (child restraint mode) seat, but the status light is not lit (indicating thatbag system determines whether the front pas- may allow the restraint to tip or move in an acci- the air bag might inflate in a crash), it could besenger air bag should be automatically turned dent or sudden stop. This can also result in the that the child restraint or seat belt is not beingOFF as required by the regulations. passenger air bag inflating in a crash instead of used properly. If such situations happen, properly being OFF. See “Child restraints” later in this position and restrain the occupant or child re-Right front passenger seat adult occupants who section for proper use and installation. straint. Otherwise reposition the occupant orare properly seated and using the seat belt asoutlined in this manual should not cause the child restraint in a rear seat. If the right front passenger seat is not occupiedpassenger air bag to be automatically turned and the seat belt is not buckled, the passenger air If a malfunction occurs in the front passenger airOFF. For small adults it may be turned OFF. Also, bag is designed not to inflate in a crash. However, bag system, the passenger air bag statusif the occupant takes his/her weight off the seat heavy objects placed on the seat could result in light or , located under the climatecushion (for example, by not sitting upright, by air bag inflation, because of the object’s weight controls, will illuminate and the supplemental airsitting on an edge of the seat, or by otherwise detected by the weight sensor. Other conditions bag warning light , located in the meter andbeing out of position), this could cause the sen- could also result in air bag inflation, such as if a gauges area in the center of the instrument panel,sor to turn the air bag OFF. In addition, if the child is standing on the seat, or if two children are will blink. Have the system checked by a NISSANoccupant improperly uses the right front seat belt on the seat, contrary to the instructions in this dealer.in the automatic locking mode (child restraint manual. Always be sure that you and all vehiclemode), this could cause the air bag to be turned Other supplemental front air bag precau- occupants are seated and restrained properly.OFF. Always be sure to be seated and wearing tionsthe seat belt properly for the most effective pro- Using the passenger air bag status light, you cantection by the seat belt and supplemental air bag. monitor when the front passenger air bag is au- tomatically turned OFF. The light will illuminateNISSAN recommends that pre-teens and chil- (indicating the air bag is OFF and will not inflate)dren be properly restrained in a rear seat. when the right front passenger seat is not occu-NISSAN also recommends that appropriate child pied.restraints and booster seats be properly installedin a rear seat. If this is not possible, the weight If an adult occupant is in the right front seat andsensor and seat belt sensors are designed to the passenger air bag status light is illuminatedoperate as described above to turn the front (indicating that the air bag is OFF), it could be Safety—Seats, seat belts and supplemental air bags 1-21 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 38. WARNING ● Tampering with the supplemental front ● Work on and around the supplemental air bag system may result in serious front air bag system should be done by● Do not place any objects on the steer- personal injury. Tampering includes a NISSAN dealer. Installation of electri- ing wheel pad or on the instrument changes to the steering wheel and the cal equipment should also be done by a panel. Also, do not place any objects instrument panel assembly by placing NISSAN dealer. The Supplemental Re- between any occupant and the steering material over the steering wheel pad straint System (SRS) wiring should not wheel or instrument panel. Such ob- and above the instrument panel or by be modified or disconnected. Unautho- jects may become dangerous projec- installing additional trim material rized electrical test equipment and tiles and cause injury if the supplemen- around the air bag system. probing devices should not be used on tal front air bag inflates. the air bag system. ● Modifying or tampering with the front● Immediately after inflation, several passenger seat may result in serious ● A cracked windshield should be re- front air bag system components will be personal injury. For example, do not placed immediately by a qualified re- hot. Do not touch them; you may se- change the front seats by placing mate- pair facility. A cracked windshield could verely burn yourself. rial on the seat cushion or by installing affect inflation of the supplemental air● No unauthorized changes should be additional trim material, such as seat bag system. made to any components or wiring of covers, on the seat. Additionally, do not ● The SRS wiring harness connectors are the supplemental air bag system. This is stow any objects under the front pas- yellow and orange for easy to prevent accidental inflation of the senger seat or the seat cushion and identification. supplemental air bag or damage to the seatback. Such objects may interfere supplemental air bag system. with the proper operation of the occu- When selling your vehicle, we request that you pant classification system (weight inform the buyer about the supplemental front air● Do not make unauthorized changes to sensor). bag system and guide the buyer to the appropri- your vehicle’s electrical system, sus- pension system or front end structure. ● No unauthorized changes should be ate sections in this Owner’s Manual. This could affect proper operation of made to any components or wiring of the supplemental front air bag system. the seat belt system. This may affect the supplemental front air bag system. Tampering with the seat belt system may result in serious personal injury.1-22 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 39. inflate in higher severity side collisions, although The seat belts should be correctly worn and the they may inflate if the forces in another type of driver and passenger seated upright as far as collision are similar to those of a higher severity practical away from the supplemental side air side impact. They are designed to inflate on the bag. Rear seat passengers should be seated as side where the vehicle is impacted. They may not far away as practical from the door finishers and inflate in certain side collisions. side roof rails. The side air bags and curtain air bag inflate quickly in order to help protect the Curtain side-impact and rollover air bags are also occupants. Because of this, the force of the side designed to inflate in certain types of rollover air bag and curtain air bag inflating can increase collisions or near rollovers. the risk of injury if the occupant is too close to, or Vehicle damage (or lack of it) is not always an is against, these air bag modules during inflation. indication of proper supplemental side air bag The side air bag and curtain air bag will deflate and curtain air bag operation. after the collision is over. WRS0422 When the supplemental side air bag and curtain The supplemental side air bags and curtainSupplemental side-impact air bag (if air bags inflate, a fairly loud noise may be heard, side-impact and rollover air bags operate followed by release of smoke. This smoke is not only when the ignition switch is in the ONso equipped) and curtain side-impact harmful and does not indicate a fire. Care should or START positions.and rollover air bags system be taken not to inhale it, as it may cause irritation After turning the ignition key to the ONThe supplemental side-impact air bags are lo- and choking. Those with a history of a breathing position, the supplemental air bag warningcated in the outside of the seatback of the front condition should get fresh air promptly. light illuminates. The supplemental air bagseats. The supplemental curtain side-impact and Supplemental side air bags, along with the use of warning light will turn off after about 7rollover air bags are located in the side roof rails. seat belts, help to cushion the impact force on seconds if the system is operational.These systems are designed to meet voluntary the chest of the front occupants. Curtain side-guidelines to help reduce the risk of injury to impact and rollover air bags help to cushion theout-of-position occupants. However, all of the impact force to the head of occupants in the frontinformation, cautions and warnings in this and rear outboard seating positions. They canmanual still apply and must be followed. help save lives and reduce serious injuries. How-The supplemental side air bags and curtain side- ever, an inflating side air bag, or curtain air bagimpact and rollover air bags are designed to may cause abrasions or other injuries. Safety—Seats, seat belts and supplemental air bags 1-23 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 40. WARNING ● Tampering with the supplemental side Pre-tensioner seat belt system (For● Do not place any objects near the seat- air bag system may result in serious front seats) personal injury. For example, do not back of the front seats. Also, do not change the front seats by placing mate- place any objects (an umbrella, bag, WARNING rial near the seatback or by installing etc.) between the front door finisher additional trim material, such as seat ● The pre-tensioner seat belt cannot be and the front seat. Such objects may covers, around the side air bag. reused after activation. It must be re- become dangerous projectiles and placed together with the retractor and cause injury if the supplemental side air ● Work around and on the curtain air bag buckle as a unit. bag inflates. system should be done by a NISSAN dealer. Installation of electrical equip- ● If the vehicle becomes involved in a● Right after inflation, several side air bag ment should also be done by a NISSAN frontal collision but the pre-tensioner is and curtain side-impact and rollover air dealer. The SRS wiring harnesses* not activated, be sure to have the pre- bag system components will be hot. Do should not be modified or discon- tensioner system checked and, if nec- not touch them; you may severely burn nected. Unauthorized electrical test essary, replaced by your NISSAN yourself. equipment and probing devices should dealer.● No unauthorized changes should be not be used on the side air bag or cur- ● No unauthorized changes should be made to any components or wiring of tain air bag system. made to any components or wiring of the side air bag and curtain air bag the pre-tensioner seat belt system. This system. This is to prevent accidental * The SRS wiring harness or connectors are is to prevent accidental activation of inflation of the side air bag and curtain yellow or orange for easy identification. the pre-tensioner seat belt or damage air bag or damage to the side air bag When selling your vehicle, we request that you to the pre-tensioner seat belt operation. and curtain air bag system. inform the buyer about the supplemental side air Tampering with the pre-tensioner seat● Do not make unauthorized changes to bag and curtain air bag system and guide the belt system may result in serious per- your vehicle’s electrical system, sus- buyer to the appropriate sections in this Owner’s sonal injury. pension system or side panel. This Manual. could affect proper operation of the supplemental curtain air bag system.1-24 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 41. ● Work around and on the pre-tensioner fire. Care should be taken not to inhale it, as it may system should be done by a NISSAN cause irritation and choking. Those with a history dealer. Installation of electrical equip- of a breathing condition should get fresh air ment should also be done by a NISSAN promptly. dealer. Unauthorized electrical test After the pre-tensioner seat belts have activated, equipment and probing devices should load limiters allow the seat belt to release web- not be used on the pre-tensioner seat bing (if necessary) to reduce forces against the belt system. chest.● If you need to dispose of the pre- If any abnormality occurs in the pre-tensioner tensioner or scrap the vehicle, contact a system, the supplemental air bag warning NISSAN dealer. Correct pre-tensioner light will not come on, will flash intermit- disposal procedures are set forth in the tently or will turn on for 7 seconds and remain on appropriate NISSAN Service Manual. after the ignition key has been turned to the ON or Incorrect disposal procedures could START position. In this case, the pre-tensioner LRS0397 cause personal injury. seat belt may not function properly. They must be 1. SRS Air bag warning labels checked and repaired. Take your vehicle to theThe driver and right front passenger seat belts 2. SRS Side air bag warning label (if so nearest NISSAN dealer.include a pre-tensioner seat belt system that equipped)activates in conjunction with the supplemental air When selling your vehicle, we request that you inform the buyer about the pre-tensioner seat belt SUPPLEMENTAL AIR BAGbag systems. Working with the seat belt retrac-tor, it helps tighten the seat belt when the vehicle system and guide the buyer to the appropriate WARNING LABELSbecomes involved in certain types of collisions, sections in this Owner’s Manual. Warning labels about the supplemental front airhelping to restrain front seat occupants. bags and supplemental side air bags are placed in the vehicle as shown in the illustration.The pre-tensioner is encased with the seat belt’sretractor. These seat belts are used the same asconventional seat belts.When the pre-tensioner seat belt activates,smoke is released and a loud noise may be heard.This smoke is not harmful and does not indicate a Safety—Seats, seat belts and supplemental air bags 1-25 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 42. When the ignition key is in the ON or START WARNING position, the supplemental air bag warning light illuminates for about 7 seconds and then turns If the supplemental air bag warning light off. This means the system is operational. is on, it could mean that the supplemental front air bag, supplemental side air bag, If any of the following conditions occur, the curtain air bag systems and/or pre- supplemental front air bag, supplemental side air tensioner seat belt systems will not oper- bag, curtain air bag and pre-tensioner seat belt ate in an accident. systems need servicing: Repair and replacement procedure ● The supplemental air bag warning light re- mains on after approximately 7 seconds. The supplemental front air bags, supplemental side air bags, curtain air bags and pre-tensioner ● The supplemental air bag warning light seat belts are designed to inflate on a one-time- flashes intermittently. only basis. As a reminder, unless it is damaged, LRS0100 ● The supplemental air bag warning light does the supplemental air bag warning light remainsSUPPLEMENTAL AIR BAG not come on at all. illuminated after inflation has occurred. RepairWARNING LIGHT Under these conditions, the supplemental front and replacement of these supplemental air bag systems should be done only by a NISSANThe supplemental air bag warning light, air bag, supplemental side air bags and curtain air dealer.displaying in the instrument panel, moni- bag or pre-tensioner seat belt systems may nottors the circuits of the supplemental front air bag, operate properly. It must be checked and re- When maintenance work is required on the ve-supplemental side air bag and curtain side- paired. Take your vehicle to the nearest NISSAN hicle, the supplemental front air bags, supple-impact and rollover air bag and pre-tensioner dealer. mental side air bags, curtain air bags, pre-seat belt systems. The circuits monitored by the tensioner seat belts and related parts should besupplemental air bag warning light are the diag- pointed out to the person performing the mainte-nosis sensor unit, crash zone sensor, satellite nance. The ignition key should always be in thesensors, rollover sensor, front air bag modules, LOCK position when working under the hood orside air bag modules, curtain air bag modules, inside the vehicle.pre-tensioner seat belts and all related wiring.1-26 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 43. SEAT BELTS WARNING● Once a supplemental front air bag, supplemental side air bag or curtain air bag has inflated, the air bag module will not function again and must be re- placed. Additionally, if any of the supplemental front air bags inflate, the activated pre-tensioner seat belts must also be replaced. The air bag module and pre-tensioner seat belt system should be replaced by a NISSAN dealer. The air bag module and pre-tensioner seat belt system cannot be repaired.● The supplemental front air bag, side air SSS0136 bag and curtain air bag systems, and PRECAUTIONS ON SEAT BELT the pre-tensioner seat belt system USAGE should be inspected by a NISSAN dealer if there is any damage to the If you are wearing your seat belt properly ad- front end or side portion of the vehicle. justed and you are sitting upright and well back in your seat, your chances of being injured or killed● If you need to dispose of the supple- in an accident and/or the severity of injury may be mental air bag, pre-tensioner seat belt greatly reduced. NISSAN strongly encourages system or scrap the vehicle, contact a you and all of your passengers to buckle up every NISSAN dealer. Correct supplemental time you drive, even if your seating position in- air bag and pre-tensioner seat belt sys- cludes a supplemental air bag. tem disposal procedures are set forth in the appropriate NISSAN Service Most U.S. states and Canadian provinces Manual. Incorrect disposal procedures or territories specify that seat belts be worn could cause personal injury. at all times when a vehicle is being driven. Safety—Seats, seat belts and supplemental air bags 1-27 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 44. SSS0134 SSS0016 WARNING WARNING● Every person who drives or rides in this ● The seat belt should be properly ad- vehicle should use a seat belt at all justed to a snug fit. Failure to do so may times. Children should be properly re- reduce the effectiveness of the entire strained in the rear seat and, if appro- restraint system and increase the priate, in a child restraint. chance or severity of injury in an acci- dent. Serious injury or death can occur if the seat belt is not worn properly.1-28 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 45. ● Be sure the seat belt tongue is securely ● All seat belt assemblies, including re- fastened to the proper buckle. tractors and attaching hardware, should be inspected after any collision ● Do not wear the seat belt inside out or by a NISSAN dealer. NISSAN recom- twisted. Doing so may reduce its mends that all seat belt assemblies in effectiveness. use during a collision be replaced un- ● Do not allow more than one person to less the collision was minor and the use the same seat belt. belts show no damage and continue to ● Never carry more people in the vehicle operate properly. Seat belt assemblies than there are seat belts. not in use during a collision should also be inspected and replaced if either ● If the seat belt warning light glows con- damage or improper operation is noted. tinuously while the ignition is turned ON with all doors closed and all seat ● All child restraints and attaching hard- SSS0014 belts fastened, it may indicate a mal- ware should be inspected after any col- function in the system. Have the system lision. Always follow the restraint WARNING checked by a NISSAN dealer. manufacturer’s inspection instructions and replacement recommendations.● Always route the shoulder belt over ● Once the pre-tensioner seat belt has The child restraints should be replaced your shoulder and across your chest. activated, it cannot be reused and must if they are damaged. Never run the belt behind your back, be replaced together with the retractor. under your arm or across your neck. The See your NISSAN dealer. CHILD SAFETY belt should be away from your face and neck, but not falling off your shoulder. ● Removal and installation of the pre- Children need adults to help protect them. tensioner seat belt system components They need to be properly restrained.● Position the lap belt as low and snug as should be done by a NISSAN dealer. possible AROUND THE HIPS, NOT THE The proper restraint depends on the child’s size. WAIST. A lap belt worn too high could Generally, infants up to about 1 year and less increase the risk of internal injuries in than 20 pounds (9 kg) should be placed in rear an accident. facing child restraints. Front facing child re- straints are available for children who outgrow rear facing child restraints. Safety—Seats, seat belts and supplemental air bags 1-29 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 46. WARNING Infants and small children WARNINGInfants and children need special protec- NISSAN recommends that infants and small chil- Never let a child stand or kneel on anytion. The vehicle’s seat belts may not fit dren be placed in child restraints that comply with seat and do not allow a child in the cargothem properly. The shoulder belt may Federal Motor Vehicle Safety Standards or Ca- areas while the vehicle is moving. Thecome too close to the face or neck. The nadian Motor Vehicle Safety Standards. You child could be seriously injured or killed inlap belt may not fit over their small hip should choose a child restraint that fits your ve- an accident or sudden stop.bones. In an accident, an improperly fit- hicle and always follow the manufacturer’s in-ting seat belt could cause serious or fatal structions for installation and use. PREGNANT WOMENinjury. Always use appropriate child Larger children NISSAN recommends that pregnant women userestraints. seat belts. The seat belt should be worn snug,All U.S. states and Canadian provinces or terri- Children who are too large for child restraints and always position the lap belt as low as pos-tories require the use of approved child restraints should be seated and restrained by the seat belts sible around the hips, not the waist. Place thefor infants and small children. See “Child Re- which are provided. shoulder belt over your shoulder and across yourstraints” later in this section. If the child’s seating position has a shoulder belt chest. Never run the lap/shoulder belt over your that fits close to the face or neck, the use of a abdominal area. Contact your doctor for specificIn addition, there are many types of child re- recommendations.straints available for larger children which should booster seat (commercially available) may helpbe used for maximum protection. overcome this. The booster seat should raise the INJURED PERSONS child so that the shoulder belt is properly posi-NISSAN recommends that all pre-teens tioned across the top, middle portion of the NISSAN recommends that injured persons useand children be restrained in the rear seat. shoulder and the lap belt is low on the hips. The seat belts. Check with your doctor for specificAccording to accident statistics, children booster seat should fit the vehicle seat and have recommendations.are safer when properly restrained in the a label certifying that it complies with Federalrear seat than in the front seat. This is Motor Vehicle Safety Standards or Canadian Mo-especially important because your vehicle tor Vehicle Safety Standards. Once the child hashas a supplemental restraint system (Air grown so the shoulder belt is no longer on or nearbag system) for the front passenger. See the face and neck, use the shoulder belt without“Supplemental restraint system” earlier in the booster seat.this section.1-30 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 47. THREE-POINT TYPE SEAT BELTWITH RETRACTOR WARNING● Every person who drives or rides in this vehicle should use a seat belt at all times.● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and WRS0137 WRS0138 receive serious internal injuries. ᭺ 2 Slowly pull the seat belt out of the retractor ᭺ 3 Position the lap belt portion low and snug and insert the tongue into the buckle until on the hips as shown.● For the most effective protection when you hear and feel the latch engage. the vehicle is in motion, the seat should be upright. Always sit well back in the ᭺ 4 Pull the shoulder belt portion toward the The retractor is designed to lock during a retractor to take up extra slack. Be sure the seat and adjust the seat belt properly. sudden stop or on impact. A slow pulling shoulder belt is routed over your shoulder motion permits the seat belt to move, and and across your chest.Fastening the seat belts allows you some freedom of movement in 1. Adjust the seat. See “Seats” earlier in this the seat. The right front passenger seat and the rear seat- section. ing positions three-point seat belts have a cinch- ing mechanism for child restraint installation. It is referred to as the automatic locking mode or child restraint mode. When automatic locking mode is activated the seat belt cannot be withdrawn again until the seat belt tongue is detached from the buckle and fully Safety—Seats, seat belts and supplemental air bags 1-31 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 48. retracted. Once retracted, the seat belt is in the To increase your confidence in the seat belts,emergency locking mode. See “Child restraints” check the operation as follows.later in this section for more information. ● Grasp the shoulder belt and pull forwardThe automatic locking mode should be quickly. The retractor should lock and re-used only for child restraint installation. strict further belt movement.During normal seat belt use by a passen- If the retractor does not lock during this check orger, the locking mode should not be acti- if you have any questions about seat belt opera-vated. If it is activated it may cause uncom- tion, see a NISSAN dealer.fortable seat belt tension. It can alsochange the operation of the front passen-ger air bag. See “Front passenger air bagand status light” earlier in this section. WARNING WRS0139When fastening the seat belts, be certainthat the seatbacks are completely se- Unfastening the seat beltscured in the latched position. If they are ᭺ 1 To unfasten the seat belt, press the button onnot completely secured, passengers may the buckle. The seat belt automatically re-be injured in an accident or sudden stop. tracts. Checking seat belt operation Seat belt retractors are designed to lock seat belt movement by two separate methods: ● When the seat belt is pulled quickly from the retractor. ● When the vehicle slows down rapidly.1-32 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 49. WARNING ● After adjustment, release the adjust- ment button and try to move the shoul- der belt anchor up and down to make sure it is securely fixed in position. ● The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effec- tiveness of the entire restraint system and increase the chance or severity of injury in an accident. LRS0394 LRS0242Center of the rear seat Front seatsSelecting correct set of seat belts: Shoulder belt height adjustment (front seats)The center seat belt buckle is identified by theCENTER mark. The center seat belt tongue can The shoulder belt anchor height should be ad-be fastened only into the center seat belt buckle. justed to the position best for you. (See “Precau- tions on seat belt usage” earlier in this section.) To adjust, pull out᭺ the adjustment button and 1 move the shoulder belt anchor᭺to the desired 2 position, so the belt passes over the center of the shoulder. The belt should be away from your face and neck, but not falling off your shoulder. Re- lease the adjustment button to lock the shoulder belt anchor into position. Safety—Seats, seat belts and supplemental air bags 1-33 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 50. WRS0190 WRS0191 WRS0192TWO-POINT TYPE SEAT BELT Fastening the belts 2. Tighten the belt by pulling the free end of theWITHOUT RETRACTOR (center of belt away from the tongue. 1. Insert the tongue into the buckle until youthe front bench seat) (if so equipped) hear and feel the latch engage.1-34 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 51. WRS0193 WRS0194 WRS02013. Position the lap belt low and snug on the 4. Loosen the belt by holding the tongue at a Unfastening the seat belts hips as illustrated. right angle to the belt, then pull on the belt. To unfasten the seat belt, press the button the buckle. SEAT BELT EXTENDERS If, because of body size or driving position, it is not possible to properly fit the three-point lap- shoulder belt and fasten it, an extender is avail- able which is compatible with the installed seat belts. The extender adds approximately 8 inches (200 mm) of length and may be used for either the driver or right front passenger seating posi- tion. See a NISSAN dealer for assistance if an extender is required. Safety—Seats, seat belts and supplemental air bags 1-35 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 52. CHILD RESTRAINTS ● Periodically check to see that the seat WARNING belt and the metal components, such as● Only NISSAN seat belt extenders, made buckles, tongues, retractors, flexible wires by the same company which made the and anchors, work properly. If loose parts, original equipment seat belts, should deterioration, cuts or other damage on the be used with NISSAN seat belts. webbing is found, the entire seat belt as-● Adults and children who can use the sembly should be replaced. standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident.● Never use seat belt extenders to install child restraints. If the child restraint is not secured properly, the child could be ARS1098 seriously injured in a collision or a sud- den stop. PRECAUTIONS ON CHILD RESTRAINTSSEAT BELT MAINTENANCE ● To clean the seat belt webbing, apply a WARNING mild soap solution or any solution recom- ● Infants and small children should al- mended for cleaning upholstery or carpet. ways be placed in an appropriate child Then wipe with a cloth and allow the seat restraint while riding in the vehicle. belts to dry in the shade. Do not allow the Failure to use a child restraint can re- seat belts to retract until they are completely sult in serious injury or death. dry. ● If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth.1-36 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 53. ● Never install a rear-facing child re- ● Choose only a restraint with a label certifying straint in the front seat. An inflating that it complies with Federal Motor Vehicle supplemental front air bag could seri- Safety Standard 213 or Canadian Motor ously injure or kill your child. A rear- Vehicle Safety Standard 213. facing child restraint must only be used ● Check the child restraint in your vehicle to be in the rear seat. sure it is compatible with the vehicle’s seat ● NISSAN recommends that the child re- and seat belt system. straint be installed in the rear seat. Ac- cording to accident statistics, children ● If the child restraint is compatible with your are safer when properly restrained in vehicle, place your child in the child restraint the rear seat than in the front seat. and check the various adjustments to be sure the child restraint is compatible with ● An improperly installed child restraint your child. Always follow all recommended could lead to serious injury or death in procedures. WRS0256 an accident. All U.S. states and provinces of Canada WARNING In general, child restraints are designed to be require that infants and small children be installed with the lap portion of a three-point type restrained in an approved child restraint at● Infants and small children should never seat belt. In addition, this vehicle is equipped with be carried on your lap. It is not possible all times while the vehicle is being oper- a universal child restraint lower anchor system, for even the strongest adult to resist the ated. referred to as the LATCH (Lower Anchors and forces of a severe accident. The child Tethers for CHildren) system. Some child re- could be crushed between the adult and WARNING straints include two rigid or webbing-mounted parts of the vehicle. Also, do not put the attachments that can be connected to these ● Improper use of a child restraint can same seat belt around both your child lower anchors. For details, see the “LATCH increase the risk or severity of injury for and yourself. (Lower Anchors and Tethers for CHildren) sys- both the child and other occupants of tem” later in this section. the vehicle. Child restraints for infants and small children of various sizes are offered by several manufactur- ers. When selecting any child restraint, keep the following points in mind: Safety—Seats, seat belts and supplemental air bags 1-37 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 54. ● Follow all of the child restraint manu- ● For a front-facing child restraint, check ● Failure to use the retractor’s locking facturer’s instructions for installation to make sure the shoulder belt does not mode will result in the child restraint and use. When purchasing a child re- go in front of the child’s face or neck. If not being properly secured. The re- straint, be sure to select one which will it does, put the shoulder belt behind the straint could tip over or otherwise be fit your child and vehicle. It may not be child restraint. If you must install a front unsecured and cause injury to the child possible to properly install some types facing child restraint in the front seat, in a sudden stop or collision. of child restraints in your vehicle. see “Installation on front passenger seat” later in this section.● If the child restraint is not anchored properly, the risk of a child being in- ● When your child restraint is not in use, jured in a collision or a sudden stop keep it secured with a seat belt to pre- greatly increases. vent it from being thrown around in case of a sudden stop or accident.● Adjustable seatbacks should be posi- tioned to fit the child restraint, but as upright as possible. CAUTION● After attaching the child restraint, test it Remember that a child restraint left in a before you place the child in it. Tilt it closed vehicle can become very hot. from side to side. Try to tug it forward Check the seating surface and buckles and check to see if the belt holds the before placing your child in the child restraint in place. The child restraint restraint. should not move more than 1 inch. If the restraint is not secure, tighten the belt INSTALLATION ON REAR BENCH as necessary, or put the restraint in an- SEAT other seat and test it again. WARNING ● The three-point seat belt in your vehicle is equipped with an automatic locking mode retractor which must be used when installing a child restraint.1-38 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 55. LRS0402 LRS0401 WRS0250Front Facing (outboard) — step 1 Front Facing (center) — step 1 Front Facing — step 2 Front facing 2. Route the seat belt tongue through the child restraint and insert it into the buckle until you When you install a child restraint on the rear hear and feel the latch engage. bench seat, follow these steps: Be sure to follow the child restraint manu- 1. Position the child restraint on the seat. It can facturer’s instructions for belt routing. be placed in a front facing direction, de- pending on the size of the child. Adjust the head restraint to its highest position. Always follow the restraint manufacturer’s instruc- tions. Safety—Seats, seat belts and supplemental air bags 1-39 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 56. WRS0251 WRS0146 WRS0252 Front Facing — step 3 Front Facing — step 4 Front Facing — step 5 3. Pull on the shoulder belt until all of the belt is 4. Allow the seat belt to retract. Pull up on the 5. Before placing the child in the child restraint, fully extended. At this time, the seat belt shoulder belt to remove any slack in the belt. use force to tilt the child restraint from side retractor is in the automatic locking mode to side, and tug it forward to make sure that (child restraint mode). It reverts back to it is securely held in place. It should not move emergency locking mode when the seat belt more than 1 inch. is fully retracted. 6. Check that the retractor is in the automatic locking mode by trying to pull more seat belt out of the retractor. If you cannot pull any more belt webbing out of the retractor, the retractor is in the automatic locking mode. 7. Check to make sure that the child restraint is properly secured prior to each use. If the belt is not locked, repeat steps 3 through 6.1-40 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 57. After the child restraint is removed and the seatbelt is fully retracted, the automatic locking mode(child restraint mode) is canceled. LRS0403 LRS0404 Rear Facing (outboard) — step 1 Rear Facing (center) — step 1 Rear facing When you install a child restraint on the rear bench seat, follow these steps: 1. Position the child restraint on the seat. The direction of the child restraint depends on the type of the child restraint and the size of the child. Always follow the restraint manu- facturer’s instructions. Safety—Seats, seat belts and supplemental air bags 1-41 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 58. LRS0408 LRS0409 LRS0410 Rear Facing — step 2 Rear Facing — step 3 Rear Facing — step 4 2. Route the seat belt tongue through the child 3. Pull on the shoulder belt until all of the belt is 4. Allow the seat belt to retract. Pull up on the restraint and insert it into the buckle until you fully extended. At this time, the seat belt shoulder belt to remove any slack in the belt. hear and feel the latch engage. retractor is in the automatic locking mode (child restraint mode). It reverts to emer- Be sure to follow the child restraint manu- gency locking mode when the seat belt is facturer’s instructions for belt routing. fully retracted.1-42 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 59. 7. Check to make sure that the child restraint is properly secured prior to each use. If the belt is not locked, repeat steps 3 through 6. After the child restraint is removed and the seat belt fully retracted, the automatic locking mode (child restraint mode) is canceled. LRS0411 LRS0429 Rear Facing — step 5 LATCH system anchor point locations rear5. Before placing the child in the child restraint, bench seat use force to tilt the child restraint from side LATCH (Lower Anchors and Tethers to side, and tug it forward to make sure that for CHildren) SYSTEM it is securely held in place. It should not move more than 1 inch. WARNING6. Check that the retractor is in the automatic ● Attach LATCH system compatible child locking mode by trying to pull more seat belt restraints only at the locations shown. If out of the retractor. If you cannot pull any a child restraint is not secured properly, more seat belt webbing out of the retractor, your child could be seriously injured or the retractor is in the automatic locking killed in an accident. mode. Safety—Seats, seat belts and supplemental air bags 1-43 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 60. seat belt to secure the child restraint. Your vehicle WARNING is equipped with special anchor points that are used with LATCH system compatible child re- Inspect the lower anchors by inserting straints. Check your child restraint for a label your fingers into the lower anchor area stating that it is compatible with the LATCH sys- and feeling to make sure there are no tem. This information may also be in the child obstructions over the LATCH system an- restraint owner’s manual. If you have such a child chors, such as seat belt webbing or seat restraint, refer to the illustration for the seating cushion material. The child restraint will not be secured properly if the LATCH sys- positions equipped with LATCH system anchors tem anchors are obstructed. which can be used to secure the child restraint. 1. To install the LATCH system compatible The LATCH system anchors are located at the child restraint, insert the child restraint rear of the seat cushion near the seatback. A LATCH system anchor attachments into the label is attached to the seatback to help you anchor points on the seat. If the child re- LRS0395 locate the LATCH system anchors. straint is equipped with a top tether, seeLATCH anchor point labels rear bench seat “Top tether strap child restraint” later in this LATCH child restraints generally require the use● The LATCH system anchors are de- of a top tether strap. See “Top tether strap child section for installation instructions. signed to withstand only those loads restraint” later in this section for installation in- 2. After attaching the child restraint and before imposed by correctly fitted child re- structions. placing the child in it, use force to tilt the straints. Under no circumstance are child restraint from side to side and tug it they to be used for adult seat belts or When installing a child restraint, carefully read forward to make sure that the child restraint harnesses. and follow the instructions in this manual and is securely held in place. It should not move those supplied with the child restraint.Some child restraints include two rigid or more than 1 inch.webbing-mounted attachments that can be con- When you install a LATCH system compatible 3. Check to make sure that the child restraint isnected to two anchors located at certain seating child restraint to the lower anchor attachments, properly secured prior to each use.positions in your vehicle. This system is known as follow these steps:the LATCH (Lower Anchors and Tethers for CHil-dren) system. This system may also be referred toas the ISOFIX or ISOFIX compatible system.With this system, you do not have to use a vehicle1-44 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 61. TOP TETHER STRAP CHILD Tighten the tether strap according to the manu-RESTRAINT facturer’s instructions to remove any slack. For best child restraint fit, see the child restraintIf your child restraint has a top tether strap, it must installation instructions in this section and thebe secured to the anchor point provided behind child restraint manufacturer’s instructions.its position. WARNING● Child restraint anchor points are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstances are they to be used for adult seat belts or harnesses. LRS0393● A child restraint with a top tether should Anchor point locations not be used in the front seat. Do not attempt to attach a tether strap to the The anchor points are located under the rear rear tether anchor points from the front window behind the rear bench seat. seat. If you have any questions when installing aFirst, secure the child restraint with the seat belt top strap child restraint on the rear seat,or the LATCH system (rear bench seat outboard consult your NISSAN dealer for details.positions only), as applicable.Adjust the rear bench seat head restraint to itshighest position and route the top tether strapbetween the head restraint and the top of theseatback. Secure the child restraint with a seatbelt. Secure the top tether strap to the anchorpoint which provides the straightest installationof the tether strap as shown later in this section. Safety—Seats, seat belts and supplemental air bags 1-45 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 62. LRS0392 WRS0423 WRS0256 Anchor point access 1. Top tether strap INSTALLATION ON FRONT 1. Pull strap 2. Hook PASSENGER SEAT OUTBOARD 2. Anchor point location POSITION 3. Anchor pointTo access the anchor points behind the rearbench seat, tilt the rear seatback forward by WARNINGlifting up on the pull strap behind the seat back. ● Never install a rear-facing child re- straint in the front passenger seat. Supplemental front air bags inflate with great force. A rear-facing child restraint could be struck by the supplemental front air bag in a crash and could seri- ously injure or kill your child.1-46 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 63. ● The three-point seat belt in your vehicle is equipped with an automatic locking mode retractor which must be used when installing a child restraint. ● Failure to use the retractor’s locking mode will result in the child restraint not being properly secured. The re- straint could tip over or otherwise be unsecured and cause injury to the child in a sudden stop or collision. WRS0378 WRS0379 Front Facing — step 1● NISSAN recommends that child re- If you must install a child restraint in the right front straints be installed in the rear seat. seat, follow these steps: However, if you must install a forward- facing child restraint in the right front 1. Position the child restraint on the front pas- passenger seat, move the passenger senger seat. It should be placed in a seat to the rearmost position. Also, be front-facing direction only. Move the sure the front passenger air bag status seat to the rearmost position. Adjust the light is illuminated to indicate the pas- head restraint to its highest position. Always senger air bag is OFF. See “Front pas- follow the child restraint manufacturer’s in- senger air bag and status light” earlier structions. Child restraints for infants in this section for details. must be used in the rear-facing direc- tion and therefore must not be used in● A child restraint with a top tether strap the front seat. should not be used in the front passen- ger seat. Safety—Seats, seat belts and supplemental air bags 1-47 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 64. WRS0159 WRS0160 WRS0161 Front Facing — step 2 Front Facing — step 3 Front Facing — step 4 2. Route the seat belt tongue through the child 3. Pull on the shoulder belt until all of the belt is 4. Allow the seat belt to retract slightly. Pull up restraint and insert it into the buckle until you fully extended. At this time, the seat belt on the shoulder belt to remove any slack in hear and feel the latch engage. retractor is in the automatic locking mode the belt. (child restraint mode). It reverts to emer- Be sure to follow the child restraint manu- gency locking mode when the seat belt is facturer’s instructions for belt routing. fully retracted.1-48 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 65. 7. Check to make sure the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 6. 8. Turn the ignition to the ON position. The passenger air bag status light should say “OFF” or . If this light is not illu- minated it may indicate a malfunction. Move the child restraint to another seating position. Have the system checked by a NISSAN dealer. After the child restraint is removed and the seat belt is fully retracted, the automatic locking mode WRS0380 (child restraint mode) is canceled. WRS0256 Front Facing — step 5 INSTALLATION ON FRONT BENCH5. Before placing the child in the child restraint, PASSENGER SEAT CENTER use force to tilt the child restraint from side to side, and tug it forward to make sure that POSITION it is securely held in place. It should not move more than 1 inch. WARNING ● Never install a rear-facing child re-6. Check that the retractor is in the automatic straint in the front passenger seat. locking mode by trying to pull more seat belt Supplemental front air bags inflate with out of the retractor. If you cannot pull any great force. A rear-facing child restraint more belt webbing out of the retractor, the could be struck by the supplemental retractor is in the automatic locking mode. front air bag in a crash and could seri- ously injure or kill your child. Safety—Seats, seat belts and supplemental air bags 1-49 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 66. ● NISSAN recommends that child re- straints be installed in the rear seat. However, if you must install a forward facing child restraint in the front center bench seat, follow these instructions carefully.● A child restraint with a top tether strap should not be used in the front passen- ger seat. WRS0430 WRS0250 Front Facing — step 1 Front Facing — step 2 If you must install a child restraint in the front 2. Route the seat belt tongue through the child center bench seat, follow these steps: restraint and insert it into the buckle until you hear and feel the latch engage. 1. Position the child restraint on the front pas- senger bench seat as illustrated. It should Be sure to follow the child restraint manu- be placed in a front-facing direction facturer’s instructions for belt routing. only. Always follow the restraint manufac- turer’s instructions. Child restraints for infants must be used in the rear-facing direction and therefore must not be used in the front seat.1-50 Safety—Seats, seat belts and supplemental air bags ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 67. WRS0264 WRS0265 Front Facing — step 3 Front Facing — step 43. Remove all slack in the lap belt for a very 4. Before placing the child in the child restraint, tight fit by pulling forcefully on the lap belt use force to tilt the child restraint from side adjustment. to side, and tug it forward to make sure it is securely in place. It should not move more than 1 inch. 5. If it is not secure, try to tighten the belt again, or put the restraint in another seat. 6. Check to make sure the child restraint is properly secured prior to each use. Safety—Seats, seat belts and supplemental air bags 1-51 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 68. 2 Instruments and controlsInstrument panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Switch operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22Meters and gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Heated mirror switch (if so equipped) . . . . . . . . . . . . . . . 2-23 Speedometer and odometer . . . . . . . . . . . . . . . . . . . . . 2-4 Headlight and turn signal switch. . . . . . . . . . . . . . . . . . . . 2-23 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Headlight control switch. . . . . . . . . . . . . . . . . . . . . . . . 2-23 Engine coolant temperature gauge . . . . . . . . . . . . . . . 2-5 Daytime running light system (Canada only) . . . . . . 2-25 Fuel gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Instrument brightness control . . . . . . . . . . . . . . . . . . . 2-25 Engine oil pressure gauge . . . . . . . . . . . . . . . . . . . . . . . 2-6 Turn signal switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26 Volt meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Fog light switch (if so equipped) . . . . . . . . . . . . . . . . 2-26 Automatic transmission fluid temperature Hazard warning flasher switch . . . . . . . . . . . . . . . . . . . . . 2-26 gauge (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Cargo lamp switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-27Compass and outside temperature display Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-27(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 Heated seat (if so equipped). . . . . . . . . . . . . . . . . . . . . . . 2-28 Outside temperature display . . . . . . . . . . . . . . . . . . . . . 2-8 Vehicle dynamic control (VDC) off switch Compass display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29Warning/indicator lights and audible reminders . . . . . . 2-12 Rear sonar system off switch (if so equipped). . . . . . . . 2-29 Checking bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 Tow mode switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30 Warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 Power outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30 Indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32 Audible reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 Instrument panel storage trays . . . . . . . . . . . . . . . . . . 2-32Security systems (if so equipped) . . . . . . . . . . . . . . . . . . 2-19 Console box (if so equipped) . . . . . . . . . . . . . . . . . . . 2-32 Vehicle security system. . . . . . . . . . . . . . . . . . . . . . . . . 2-19 Center armrest storage (if so equipped) . . . . . . . . . . 2-34 Nissan vehicle immobilizer system (NVIS) . . . . . . . . 2-20 Glove box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34Windshield wiper and washer switch . . . . . . . . . . . . . . . 2-22 Sunglasses holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-35 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 69. Map pockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-35 Console light (if so equipped) . . . . . . . . . . . . . . . . . . . 2-46 Seatback pocket (if so equipped) . . . . . . . . . . . . . . . 2-36 Personal lights (if so equipped) . . . . . . . . . . . . . . . . . . . . 2-46 Overhead console (if so equipped) . . . . . . . . . . . . . . 2-36 Map lights (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . 2-47 Cup holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37 Homelinkா universal transceiver (if so equipped) . . . . . 2-47 Grocery hooks (if so equipped) . . . . . . . . . . . . . . . . . 2-39 Programming HomeLinkா. . . . . . . . . . . . . . . . . . . . . . . 2-48 Lockable bedside storage compartment Programming HomeLinkா for Canadian (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40 customers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-49Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40 Operating the HomeLinkா universal Power windows (if so equipped) . . . . . . . . . . . . . . . . 2-40 transceiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-49 Manual windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-43 Programming trouble-diagnosis . . . . . . . . . . . . . . . . . 2-49 Rear sliding window (if so equipped) . . . . . . . . . . . . 2-43 Clearing the programmed information . . . . . . . . . . . . 2-50Sunroof (if so equipped). . . . . . . . . . . . . . . . . . . . . . . . . . . 2-43 Reprogramming a single HomeLinkா button . . . . . . 2-50 Automatic sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-43 If your vehicle is stolen . . . . . . . . . . . . . . . . . . . . . . . . . 2-50Interior light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 70. INSTRUMENT PANEL 1. Driver, center and passenger ventila- tors (P. 4-11) 2. Instrument brightness control (P. 2-25) 3. Headlight and turn signal switch (P. 2-23) 4. Steering wheel switch for audio control (if so equipped) (P. 4-36) 5. Driver supplemental air bag/horn (P. 1-10, P. 2-27) 6. Meters, gauges and warning/indicator lights (P. 2-3, 2-12) 7. Cruise control main/set switches (if so equipped) (P. 5-17) 8. Windshield wiper/washer switch (P. 2-22) 9. Ignition switch (P. 5-7) 10. Navigation system* (if so equipped) (P. 4-2) 11. Navigation system* controls (if so equipped) (P. 4-2) 12. Audio system controls (P. 4-19) 13. Front passenger supplemental air bag (P. 1-10) 14. Glove box (P. 2-34) 15. Climate controls (P. 4-12) WIC0648 16. Aux jack (P. 4-35)2-2 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 71. METERS AND GAUGES17. Heated seat switch (if so equipped) (P. 2-28)18. Power outlet (P. 2-30)19. Vehicle dynamic control (VDC) off switch (if so equipped) (P. 2-29)20. Tow mode switch (P. 2-30)21. Shift selector lever (console) (if so equipped) (P. 5-9)22. Passenger air bag status light (P. 2-17)23. Hazard lights (P. 2-26)24. 4WD shift switch (if so equipped) (P. 5-20)25. Shift selector lever (column) (if so equipped) (P. 5-9)26. Instrument brightness control (P. 2-25)27. Tilt steering wheel control (P. 3-13)28. Cargo lamp switch (P. 2-27)29. Rear sonar system off switch (if so equipped) (P. 2-29)30. Pedal position adjustment switch (if so equipped) (P. 3-13) LIC0540*: Refer to the separate Navigation System 7. Automatic transmission fluid tempera- 1. Warning/indicator lightsOwner’s Manual (if so equipped). 2. Tachometer ture gauge (if so equipped)See the page number indicated in paren- 3. Speedometer 8. Odometer/Twin trip odometertheses for operating details. 4. Engine coolant temperature gauge 9. Volt meter 5. Fuel gauge 6. Engine oil pressure gauge Instruments and controls 2-3 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 72. Odometer/Twin trip odometer The odometer/twin trip odometer is displayed when the ignition key is in the ON position. The odometer records the total distance the ve- hicle has been driven. The twin trip odometer records the distance of individual trips. LIC0541 LIC05421. Speedometer Changing the display:2. Odometer/twin trip display Pushing the change button changes the display3. Change button as follows:SPEEDOMETER AND ODOMETER Trip → Trip → Odometer onlySpeedometer Resetting the trip odometer:The speedometer indicates vehicle speed in Pushing the change button for more than 1 sec-miles per hour (MPH) and kilometers per hour ond resets the trip odometer to zero.(km/h).2-4 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 73. CAUTION If the gauge indicates engine coolant tem- perature over the normal range, stop the vehicle as soon as safely possible. If the engine is overheated, continued opera- tion of the vehicle may seriously damage the engine. See “If your vehicle over- heats” in the “In case of emergency” sec- tion for immediate action required. LIC0543 LIC0544TACHOMETER ENGINE COOLANT TEMPERATUREThe tachometer indicates engine speed in revo- GAUGElutions per minute (r/min). Do not rev engine into The gauge indicates the engine coolant tempera-the red zone ᭺.1 ture. The engine coolant temperature is within the normal range ᭺ when the gauge needle points 1 CAUTION within the zone shown in the illustration.When engine speed approaches the red The engine coolant temperature varies with thezone, shift to a higher gear. Operating theengine in the red zone may cause serious outside air temperature and driving conditions.engine damage. Instruments and controls 2-5 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 74. The indicates that the fuel filler lid is located on the driver’s side of the vehicle. CAUTION ● If the vehicle runs out of fuel, the malfunction indicator lamp (MIL) may come on. Refuel as soon as possible. After a few driving trips, the lamp should turn off. If the lamp remains on after a few driving trips, have the vehicle inspected by a NISSAN dealer. LIC0545 ● For additional information, see “Mal- LIC0546FUEL GAUGE function indicator lamp (MIL)” later in ENGINE OIL PRESSURE GAUGE this section.The gauge indicates the approximate fuel level The gauge indicates the engine lubrication sys-in the tank. tem oil pressure while the engine is running. When the engine speed is high, the engine oilThe gauge may move slightly during braking, pressure is also high. When it is low, the gaugeturning, acceleration, or going up or down hills. indicates the low oil pressure.The gauge needle returns to E (Empty) after theignition key is turned to OFF. CAUTIONThe low fuel warning light comes on when the ● This gauge is not designed to indicateamount of fuel in the tank is getting low. low engine oil level. Use the dipstick to check the oil level. (See “Engine oil” inRefill the fuel tank before the gauge regis- the “Maintenance and do-it-yourself”ters E (Empty). section.)2-6 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 75. ● If the gauge needle does not move with the proper amount of engine oil, have the vehicle checked by a NISSAN dealer. Continued vehicle operation in such a condition could cause serious damage to the engine. LIC0547 LIC0548 VOLT METER AUTOMATIC TRANSMISSION FLUID When the ignition key is turned to the ON posi- TEMPERATURE GAUGE (if so tion, the volt meter indicates the battery voltage. equipped) When the engine is running, it indicates the gen- erator voltage. This gauge indicates the temperature of the au- tomatic transmission fluid. The automatic trans- While cranking the engine, the volts drop below mission fluid temperature is in the normal range the normal range. If the needle is not in the normal range (11 - 15 volts) ᭺ while the engine is 1 ᭺ when the gauge needle points within the zone 1 shown in the illustration. running, it may indicate that the charging system is not functioning properly. Have the system checked by a NISSAN dealer. Instruments and controls 2-7 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 76. COMPASS AND OUTSIDE TEMPERATURE DISPLAY (if so equipped) This unit has the following functions: CAUTION● This gauge is not designed to indicate ● Measures terrestrial magnetism and indi- low automatic transmission fluid level. cates heading direction of vehicle Use the dipstick to check the fluid level. ● Indicates outside air temperature (See “5-speed automatic transmission fluid” in the “Maintenance and do-it- yourself” section.)● If the gauge indicates automatic trans- mission fluid temperature over the nor- mal range, stop the vehicle as soon as safely possible. Have the vehicle checked by a NISSAN dealer. Contin- ued operation of the vehicle may seri- ously damage the transmission. LIC0583 OUTSIDE TEMPERATURE DISPLAY Push the button when the ignition key is in the ACC or ON position. The outside tempera- ture will be displayed ᭺. 1 ● To change from °F to °C, push and hold the button for about 3 seconds until the display begins to flash. Press the button again to toggle between °F and °C. Once you have selected °F or °C, the display will continue to flash for about 5 seconds, then the temperature will display.2-8 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 77. ● When the outside temperature is between COMPASS DISPLAY 140°F (60°C) and 194°F (90°C), the display will read 140°F (60°C). When the tempera- Push the button when the ignition key is in ture is above 194°F (90°C), the display will the ACC or ON position to display the direction read “SC”. ᭺. 1● When the outside temperature is between N: north than -40°F (-40°C) and -60°F (-51°C), the E: east display will read -40°F (-40°C). When the S: south temperature is below -60°F (-51°C), the dis- W: west play will read “OC”. If the display reads “CAL”, calibrate the compass● The outside temperature sensor is located in by driving the vehicle in three complete circles at front of the radiator. The sensor may be less than 5 MPH (8 km/h). affected by road or engine heat, wind direc- You can also calibrate the compass by driving tion and other driving conditions. The display your vehicle on your everyday route. The com- may differ from the actual outside tempera- pass will be calibrated once it has tracked three ture or the temperature displayed on various complete circles. signs or billboards.● Temperature display will not update unless the vehicle is moving faster than 12 MPH (20 km/h), or the ignition switch has been OFF for 4 hours. Instruments and controls 2-9 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 78. Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Press and hold the button for about 8 seconds. The current zone number will ap- pear in the display. 2. Find your current location on the zone map. Refer to the illustration. Record the zone number. 3. Press and hold the button until the new zone number appears in the display. After you stop pressing the switch in, the display will show a compass direction within a few seconds. Inaccurate compass direction: 1. With the display turned on, push the button about 8 seconds, until the zone se- lection comes up (a number will be dis- played in the mirror compass window). 2. Toggle until correct zone is found and re- lease button. WIC03552-10 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 79. 3. The display will return to the normal com- pass mode within 5 seconds of no button activity.4. If the vehicle changes zone, repeat steps 1 through 3. See map.● If the compass deviates from the correct indication soon after repeated adjustment, have the compass checked at an authorized dealer.● The compass may not indicate the correct compass point in tunnels or while driving up or down a steep hill. (The compass returns to the correct compass point when the ve- hicle moves to an area where the geomag- netism is stabilized.) CAUTION● Do not install a ski rack, antenna, etc., which are attached to the vehicle by means of a magnet. They affect the op- eration of the compass.● When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as it may cause the liquid cleaner to enter the mirror housing. Instruments and controls 2-11 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 80. WARNING/INDICATOR LIGHTS ANDAUDIBLE REMINDERS or Anti-lock brake warning light Low tire pressure warning light or Front passenger air bag status light Automatic transmission check warning light Low windshield washer fluid warning light High beam indicator light (Blue) Automatic transmission park warning light Seat belt warning light and chime Malfunction indicator lamp (MIL) ( model) or Brake warning lightas Supplemental air bag warning light Security indicator light (NVIS) (if so equipped) Charge warning light Automatic transmission position indicator light Slip indicator light (if so equipped) Door open warning light Brake limited-slip differential indicator light (if Transfer 4LO position indicator light so equipped) ( model) Engine oil pressure low/engine coolant tem- Cruise main switch indicator light Turn signal/hazard indicator lights perature high warning light 4WD warning light ( model) Cruise set switch indicator light Vehicle dynamic control off indicator light (if so equipped) Low fuel warning light 4WD shift indicator light ( model)CHECKING BULBS , or , , or , , , , , , , , , ,With all doors closed, apply the parking brakeand turn the ignition key to the ON position The following lights come on briefly and then go If any light fails to come on, it may indicate awithout starting the engine. The following lights off: burned-out bulb or an open circuit in the electri-will come on: cal system. Have the system repaired promptly.2-12 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 81. WARNING LIGHTS Automatic transmission park This light indicates that the automatic transmis- or Anti-lock brake warning light ( model) sion parking function is not engaged. If the trans- fer control is not secured in any drive position warning light while the automatic transmission selector lever is WARNINGIf the light comes on while the engine is running, in the P (Park) position, the transmission willit may indicate the anti-lock brake system is not ● If the ATP light is ON, this indicates that disengage and the wheel will not lock.functioning properly. Have the system checked the automatic transmission P (Park) po-by a NISSAN dealer. sition will not function and the transfer or Brake warning light case is in neutral.Turn off the engine, and start it again by ● When parking, always make sure that This light functions for both the parking brake andslowly turning the ignition key (quickly do- the 4WD shift switch is in 4H or 4LO and the foot brake systems.ing so may cause the ABS light to stay on the parking brake is set. Failure to en-when there is nothing wrong). If the light When the ignition key is in the ON position, the gage the transfer control in 4H or 4LOstays on, have the system checked by a light comes on when the parking brake is applied, could result in the vehicle moving unex-NISSAN dealer. and also warns of a low brake fluid level. If the pectedly, resulting in serious personal injury or property damage. light comes on while the engine is running withIf an abnormality occurs in the system, the anti- the parking brake not applied, stop the vehiclelock function ceases, but the regular braking ● Part time 4WD: Shift the 4WD switch and perform the following:system continues to operate. into the 2WD, 4H or 4LO position again to turn off the ATP warning light when 1. Check the brake fluid level. Add brake fluidIf the light comes on while you are driving, the automatic transmission selector le- as necessary. See “Brake and clutch fluid” incontact a NISSAN dealer for repair. ver is in the P position and the ATP the “Maintenance and do-it-yourself” sec- warning light is ON. (Before shifting the tion of this manual. Automatic transmission check 4WD switch into the 4LO position, move warning light the automatic transmission selector le-When the ignition switch is turned ON, the light ver into the N position once, shift thecomes on for about 2 seconds. If the light blinks selector lever into P again and makefor approximately 8 seconds, it may indicate the sure the ATP warning light is OFF.)automatic transmission system is not functioningproperly. Have your NISSAN dealer check andrepair the transmission. Instruments and controls 2-13 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 82. 2. If the brake fluid level is correct, have the your vehicle overheats” in the “In case of emer- CAUTION brake system checked by a NISSAN dealer. gency” section of this manual. Do not continue driving if the generator WARNING belt is loose, broken or missing. CAUTION● Your brake system may not be working Door open warning light ● Running the engine with the engine oil properly if the warning light is on. Driv- pressure warning light on could cause ing could be dangerous. If you judge it serious damage to the engine almost This light comes on when any of the doors are not to be safe, drive carefully to the nearest immediately. Such damage is not cov- closed securely while the ignition key is in the ON service station for repairs. Otherwise, ered by warranty. Turn off the engine as have your vehicle towed because driv- position. soon as it is safe to do so. ing it could be dangerous. Engine oil pressure ● If the gauge indicates engine coolant● Pressing the brake pedal with the en- low/Engine coolant tempera- temperature over the normal range, gine stopped and/or a low brake fluid ture high warning light stop the vehicle as soon as safely pos- level may increase your stopping dis- sible. If the engine is overheated, con- tance and braking will require greater This light warns of low engine oil pressure or high tinued operation of the vehicle may se- pedal effort as well as pedal travel. engine coolant temperature. riously damage the engine. See “If your vehicle overheats” in the “In case of● If the brake fluid level is below the If the light flickers or comes on during normal emergency” section for immediate ac- MINIMUM or MIN mark on the brake driving, pull off the road in a safe area, stop the tion required. fluid reservoir, do not drive until the engine and allow it to cool. If the light remains on brake system has been checked at a after checking the oil and coolant, stop the en- 4WD warning light NISSAN dealer. gine immediately and call a NISSAN dealer or ( model) other authorized repair shop. Charge warning light The 4WD warning light comes on when the key This light is not designed to indicate a low switch is turned to ON. It turns off soon after theIf this light comes on while the engine is running, oil or low coolant level. Check the oil level engine is started.it may indicate the charging system is not func- with the dipstick and check the coolant level ontioning properly. Turn the engine off and check the reservoir. See “Engine oil” and “Checking If the engine or vehicle is not functioning properly,the generator belt. If the belt is loose, broken, engine coolant level” in the “Maintenance and the warning light will either remain illuminated ormissing, or if the light remains on, see a NISSAN do-it-yourself” section of this manual. Also see “If blink. See “4WD warning light” in the “Startingdealer immediately. and driving” section.2-14 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 83. CAUTION Low tire pressure warning For additional information, see “Low tire pressure light warning system” in the “Starting and driving”● If the warning light comes on or blinks section and “Low tire pressure warning system” during operation, have your vehicle This light warns of low tire pressure. in the “In case of emergency” section. checked by a NISSAN dealer as soon as possible. NISSAN’s low tire pressure warning system is a tire pressure monitoring system. It monitors tire WARNING● Do not drive on dry hard surface roads pressure of all tires except the spare. When the ● If the light does not come on with the in the 4H or 4LO position. If the 4WD tire pressure monitoring system warning light is key switch turned ON, have the vehicle warning light turns on when you are lit, one or more of your tires is significantly under- checked by a NISSAN dealer as soon as driving on dry hard surface roads: inflated. You should stop and check your tires as possible. – in the 4H position, shift the 4WD shift soon as possible, and inflate them to the proper ● If the light comes on while driving, switch to 2WD. pressure as indicated on the vehicle’s tire infor- avoid sudden steering maneuvers or – in the 4LO position, stop the vehicle, mation placard. Driving on a significantly under- abrupt braking, reduce vehicle speed, move the automatic transmission inflated tire causes the tire to overheat and can pull off the road to a safe location and shift selector lever to the N position lead to tire failure. Under-inflation also reduces stop the vehicle as soon as possible. with the brake pedal depressed, and fuel efficiency and tire tread life, and may affect Serious vehicle damage could occur shift the 4WD shift switch to 2WD. the vehicle’s handling and stopping ability. Each and may lead to an accident and could● If the warning light is still on after the tire, including the spare, should be checked result in serious personal injury. Check above operation, have your vehicle monthly when cold and set to the recommended the tire pressure for all four tires. Adjust checked by a NISSAN dealer as soon as inflation pressure as specified in the vehicle plac- the tire pressure to the recommended possible. ard and owner’s manual. COLD tire pressure shown on the Tire and Loading Information label to turn Low fuel warning light The recommended inflation pressure may also be the low tire pressure warning light OFF. found on the Tire and Loading Information Label. If the light still comes on while drivingThis light comes on when the fuel level in the fuel after adjusting the tire pressure, a tire Low tire pressure warning:tank is getting low. Refuel as soon as it is conve- may be flat. If you have a flat tire, re-nient, preferably before the fuel gauge reaches E If the vehicle is being driven with very low tire place it with a spare tire as soon as(Empty). There will be a small reserve of fuel pressure (lower than 28 psi, 193 kPa), the light possible.in the tank when the fuel gauge needle will illuminate and the chime will sound for aboutreaches E (Empty). 10 seconds. Instruments and controls 2-15 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 84. ● When a spare tire is mounted or a wheel Seat belt warning light and ● The supplemental air bag warning light is replaced, tire pressure will not be chime flashes intermittently. indicated and the low tire pressure ● The supplemental air bag warning light does warning system will not function. Con- The light and chime remind you to fasten your seat belts. The light illuminates whenever the not come on at all. tact your NISSAN dealer as soon as possible for tire replacement and/or ignition key is turned to the ON or START position Unless checked and repaired, the supplemental system resetting. and remains illuminated until the driver’s seat belt restraint system (air bag system) and/or the pre- is fastened. At the same time, the chime sounds tensioner seat belts may not function properly. CAUTION for about 7 seconds unless the driver’s seat belt For additional details see “Supplemental restraint is securely fastened. system” in the “Safety—Seats, seat belts and● The low tire pressure warning system is supplemental air bags” section of this manual. not a substitute for the regular tire pres- Refer to “Seat belts” in the “Safety—Seats, seat sure check. Be sure to check the tire belts and supplemental air bags” section for pre- pressure regularly. cautions on seat belt usage. WARNING If the supplemental air bag warning light● If the vehicle is being driven at speeds Supplemental air bag warning is on, it could mean that the supplemental of less than 20 MPH (32 km/h), the low tire pressure warning system may not light front air bag, supplemental side air bag, curtain side-impact and rollover air bag operate correctly. When the ignition key is in the ON or START systems (if so equipped) and/or pre-● Be sure to install the specified size of position, the supplemental air bag warning light tensioner seat belt systems will not oper- tires to the 4 wheels correctly. illuminates for about 7 seconds and then turns ate in an accident. off. This means the system is operational. Low windshield washer fluid If any of the following conditions occur, the INDICATOR LIGHTS warning light supplemental front air bags, supplemental side Automatic transmission posi-This light comes on when the windshield washer air bags (if so equipped), curtain side-impact and tion indicator lightfluid is at a low level. Add windshield washer fluid rollover air bags (if so equipped), and pre- tensioner seat belt systems need servicing and When the ignition key is turned to the ON posi-as necessary. See the “Maintenance and do-it- your vehicle must be taken to a NISSAN dealer: tion, this indicator light shows the automaticyourself” section of this manual. transmission selector lever position. See “Driving ● The supplemental air bag warning light re- the vehicle” in the “Starting and driving” section mains on after approximately 7 seconds. of this manual.2-16 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 85. Brake limited-slip differential 4WD shift indicator light The high beam indicator light also comes on off indicator light (if so ( model) when the passing signal is activated. equipped) The light should turn off within 1 second after Malfunction indicator lampThis indicator light comes on if the brake limited- turning the ignition switch to ON. (MIL)slip differential is activated. If activated, the sys- While the engine is running, the 4WD shift indi- If this indicator lamp comes on steady or blinkstem will apply brake to the slipping rear wheel and cator light will illuminate the position selected by while the engine is running, it may indicate aprovide more traction to the non-slipping rear the 4WD shift switch. potential emission control malfunction.wheel. The 4WD shift indicator light may blink The malfunction indicator lamp may also come on Cruise main switch indicator while shifting from one drive mode to the steady if the fuel filler cap is loose or missing, or if light other. the vehicle runs out of fuel. Check to make sure the fuel filler cap is installed and closed tightly,The light comes on when the cruise control main or Front passenger and that the vehicle has at least 3 gallons of fuelswitch is pushed. The light goes out when the air bag status light in the fuel tank.main switch is pushed again. When the cruise The front passenger air bag status light ( After a few driving trips, the lamp shouldmain switch indicator light comes on, the cruise or ) will be lit and the passenger front air turn off if no other potential emission controlcontrol system is operational. bag will be OFF depending on how the right front system malfunction exists. Cruise set switch indicator passenger seat is being used. Operation light For front passenger air bag status light operation, The malfunction indicator lamp will come on inThe light comes on while the vehicle speed is see “Front passenger air bag and status light” in one of two ways:controlled by the cruise control system. If the light the “Safety — Seats, seat belts and supplemental ● Malfunction indicator lamp on steady — Anblinks while the engine is running, it may indicate air bags” section of this manual. emission control system malfunction hasthe cruise control system is not functioning prop- been detected. Check the fuel filler cap. If High beam indicator lighterly. Have the system checked by a NISSAN the fuel filler cap is loose or missing, tightendealer. (Blue) or install the cap and continue to drive the This blue light comes on when the headlight high vehicle. The lamp should turn off after beams are on and goes out when the low beams a few driving trips. If the lamp does are selected. not turn off after a few driving trips, have the Instruments and controls 2-17 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 86. vehicle inspected by a NISSAN dealer. You Security indicator light (NVIS) Transfer 4LO position indica- do not need to have your vehicle towed to (if so equipped) tor light ( model) the dealer. This light blinks whenever the ignition switch is in The light should turn off within 1 second after ● Malfunction indicator lamp blinking — An the LOCK, OFF or ACC position. This function turning the ignition switch to ON. engine misfire has been detected which may indicates the security system equipped on the damage the emission control system. To re- vehicle is operational. This light comes on when the 4WD shift switch is duce or avoid emission control system dam- set in the 4LO position with the ignition key in the For additional information, see “Security system” age: ON position. later in this section. – do not drive at speeds above 45 MPH If the 4WD shift switch is set in the 4LO position (72 km/h). Slip indicator light (if so and the light blinks, stop the vehicle, drive slowly equipped) forward and the light will turn on. – avoid hard acceleration or deceleration. This indicator light will blink when the traction When you shift between 4H and 4LO, stop the – avoid steep uphill grades. control system is limiting wheel spin. Slippery vehicle, move the automatic transmission selec- – if possible, reduce the amount of cargo road conditions may exist if the slip indicator tor lever to the N (Neutral) position with the brake being hauled or towed. blinks on. If this happens, adjust your driving pedal depressed, then push the 4WD shift accordingly. switch and move it to 4LO or 4H.The malfunction indicator lamp may stop blinkingand come on steady. Have the vehicle inspected by The slip indicator light also comes on when you The transfer case may be damaged if you shift thea NISSAN dealer. You do not need to have your turn the ignition key to the ON position. The light switch while driving.vehicle towed to the dealer. will turn off after about 2 seconds if the system is operational. If the light does not come on or go You cannot move the transfer 4WD shift switch CAUTION off, have the traction control system checked by a between 4H and 4LO unless you have firstContinued vehicle operation without hav- NISSAN dealer. stopped the vehicle and moved the automaticing the emission control system checked transmission shift selector lever to N (Neutral)and repaired as necessary could lead to The system operates in all transmission shift lever with the brake pedal depressed. Make sure thepoor driveability, reduced fuel economy, positions, but the system can upshift the trans- transfer 4LO position indicator light turns onand possible damage to the emission con- mission only as high as the indicated shift lever when you shift the 4WD shift switch to 4LO.trol system. position. The indicator light may blink while shifting from one drive mode to the other.2-18 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 87. SECURITY SYSTEMS (if so equipped) Turn signal/hazard indicator system working when starting the vehicle or ac- lights celerating, but this is normal.The appropriate light flashes when the turn signal AUDIBLE REMINDERSswitch is activated. Brake pad wear warningBoth lights flash when the hazard switch is turned The front disc brake pads have audible wearon. warnings. When a front brake pad requires re- placement, it makes a high pitched scraping Vehicle dynamic control off sound when the vehicle is in motion, whether or indicator light (if so equipped) not the brake pedal is depressed. Have theThis indicator light comes on when the vehicle brakes checked as soon as possible if the warn-dynamic control off switch is pushed to OFF. This ing sound is heard.indicates the vehicle dynamic control system is Key reminder chimenot operating. LIC0644 A chime sounds if the driver’s door is opened Your vehicle has two types of security systems:Push the vehicle dynamic control off switch again while the key is left in the ignition switch. Removeor restart the engine and the system will operate the key and take it with you when leaving the ● Vehicle security systemnormally. See “Vehicle dynamic control (VDC) vehicle. ● NISSAN Vehicle Immobilizer System—NVISsystem” in the “Starting and driving” section ofthis manual. Light reminder chime VEHICLE SECURITY SYSTEMThe vehicle dynamic control light also comes on With the ignition switch in the OFF position, a The vehicle security system provides visual andwhen you turn the ignition key to the ON position. chime sounds when the driver’s door is opened if the headlights or parking lights are on. audio alarm signals if parts of the vehicle areThe light will turn off after about 2 seconds if the disturbed.system is operational. If the light stays on or Turn the headlight control switch off before leav-comes on along with the SLIP indicator light ing the vehicle. How to arm the vehicle security sys-while you are driving, have the vehicle dynamic temcontrol system checked by a NISSAN dealer. 1. Close all windows. (The system can beWhile the vehicle dynamic control system is op- armed even if the windows are open.)erating, you might feel slight vibration or hear the Instruments and controls 2-19 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 88. 2. Remove the key from the ignition switch. 4. Confirm that the indicator light comes ● The headlights blink and the horn sounds on. The light stays on for about 30 intermittently. 3. Close all doors. Lock all doors. The doors seconds. The vehicle security system is now can be locked with the key, power door lock ● The alarm automatically turns off after ap- pre-armed. After about 30 seconds the ve- switch (if the door is opened, locked and proximately 45 seconds. However, the alarm hicle security system automatically shifts then closed), or with the keyfob. reactivates if the vehicle is tampered with into the armed phase. The light begins again. The alarm can be shut off by unlocking Keyfob operation: to flash once every 3 seconds. If, during the a door with the key, or by pressing the 30-second pre-arm time period, the door is ● Push the button on the keyfob. button on the keyfob. unlocked by the key or the keyfob, or the All doors lock. The hazard lights flash ignition key is turned to ACC or ON, the The alarm is activated by: twice and the horn beeps once to indicate system will not arm. all doors are locked. ● opening a door without using the key or ● If the key is turned slowly when locking keyfob (even if the door is unlocked by using ● When the button is pushed with the door, the system may not arm. Fur- the inside lock knob or the power door lock all doors locked, the hazard lights flash thermore, if the key is turned beyond switch). twice and the horn beeps once as a re- the vertical position toward the unlock minder that the doors are already locked. position to remove the key, the system How to stop an activated alarm The horn may or may not beep. Refer to may be disarmed when the key is re- The alarm stops only by unlocking a door with the “Silencing the horn beep feature” (vehicles moved. If the indicator light fails to key, or by pressing the button on the key- without navigation system) in the “Pre- glow for 30 seconds, unlock the door fob. driving checks and adjustments” section or once and lock it again. “Vehicle electronic systems” (vehicles with NISSAN VEHICLE IMMOBILIZER ● Even when the driver and/or passen- navigation system) in the “Display screen, gers are in the vehicle, the system will SYSTEM (NVIS) heater, air conditioner and audio systems” arm with all doors closed and locked The NISSAN Vehicle Immobilizer System (NVIS) section. with the ignition key in the OFF posi- will not allow the engine to start without the use of tion. a registered NVIS key. Vehicle security system activation If the engine fails to start using a registered NVIS The vehicle security system will give the following key (for example, when interference is caused by alarm: another NVIS key, an automated toll road device2-20 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 89. or automatic payment device on the key ring), any interference received, including inter-restart the engine using the following proce- ference that may cause undesired opera-dures: tion of the device. 1. Leave the ignition switch in the ON position CHANGES OR MODIFICATIONS NOT EX- for approximately 5 seconds. PRESSLY APPROVED BY THE MANUFAC- TURER FOR COMPLIANCE COULD VOID 2. Turn the ignition switch to the OFF or LOCK THE USER’S AUTHORITY TO OPERATE position, and wait approximately 5 seconds. THE EQUIPMENT. 3. Repeat steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered NVIS key.If the no start condition re-occurs, NISSAN rec- LIC0474ommends placing the registered NVIS key on a Security indicator lightseparate key ring to avoid interference from otherdevices. The security indicator light blinks whenever the ignition switch is in the LOCK, OFF or ACCStatement related to Section 15 of FCC position. This function indicates the NISSAN Ve-Rules for NISSAN Vehicle Immobilizer Sys- hicle Immobilizer System (NVIS) is operational.tem (CONT ASSY — IMMOBILIZER, ANTASSY — IMMOBILIZER) If the NVIS is malfunctioning, the light will remain on while the ignition key is in the ON position.This device complies with part 15 of the If the light still remains on and/or the en-FCC Rules and RSS-210 of Industry gine will not start, see a NISSAN dealer forCanada. Operation is subject to the follow- NVIS service as soon as possible. Pleaseing two conditions; bring all NVIS keys that you have when(1) This device may not cause harmful in- visiting your NISSAN dealer for service.terference, and (2) this device must accept Instruments and controls 2-21 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 90. WINDSHIELD WIPER AND WASHERSWITCH NOTE: ● Do not operate the washer if the reser- You can turn on or turn off the driving voir tank is empty. speed dependent intermittent wiper func- ● Do not fill the window washer reservoir tion. Refer to “Personalized settings tank with washer fluid concentrates at menu” (vehicles without navigation sys- full strength. Some methyl alcohol tem) or “Vehicle electronic systems” (ve- based washer fluid concentrates may hicles with navigation system) in the “Dis- permanently stain the grille if spilled play screen, heater, air conditioner and while filling the window washer reser- audio systems” section later in this manual. voir tank. ᭺ 2 Low — continuous low speed operation ● Pre-mix washer fluid concentrates with water to the manufacturer’s recom- ᭺ 3 High — continuous high speed operation mended levels before pouring the fluid Push the lever up ᭺ to have one sweep opera- 4 into the window washer reservoir tank. LIC0386 tion of the wiper. Do not use the window washer reservoirSWITCH OPERATION tank to mix the washer fluid concen- Pull the lever toward you ᭺ to operate the 5 trate and water.The windshield wiper and washer operates when washer. The wiper will also operate several times.the ignition switch is in the ON position. WARNINGPush the lever down to operate the wiper at thefollowing speed: In freezing temperatures the washer solu- tion may freeze on the windshield and᭺1 Intermittent — intermittent operation can be obscure your vision which may lead to an adjusted by turning the knob toward ᭺ A accident. Warm the windshield with the (Slower) or ᭺ (Faster). Also, the intermit- B defroster before you wash the windshield. tent operation speed varies in accordance with the vehicle speed. (For example, when CAUTION the vehicle speed is high, the intermittent operation speed will be faster.) ● Do not operate the washer continu- ously for more than 30 seconds.2-22 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 91. HEATED MIRROR SWITCH (if so HEADLIGHT AND TURN SIGNALequipped) SWITCH LIC0488 LIC0560 LIC0561To defrost the heated outside mirrors: HEADLIGHT CONTROL SWITCH Autolight system (if so equipped)Start the engine and push the heated mirror Lighting The autolight system allows the headlights to beswitch. The indicator light on the switch comes set so they turn on and off automatically. Theon. Press the switch again to turn the heated ᭺ 1 When turning the switch to the posi- autolight system can:mirror off. tion, the front parking, tail, license plate and instrument panel lights come on. ● Turn on the headlights, front parking, tail,The heated outside mirrors automatically turn off license plate and instrument panel lights au-after approximately 15 minutes. ᭺ 2 When turning the switch to the posi- tomatically when it is dark. tion, the headlights come on and all the other lights remain on. ● Turn off all the lights when it is light. ● Keep all the lights on for up to 180 seconds after you turn the key to OFF and all doors are closed. Instruments and controls 2-23 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 92. NOTE: the autolight sensor reacts as if it is dark out and the headlights will illuminate. IfAutolight activation sensitivity and the this occurs while parked with the enginetime delay for autolight shutoff can be ad- off and the key in the ON position, yourjusted. For vehicles with navigation sys- vehicle’s battery could become discharged.tem, see “Vehicle electronic systems” (ve-hicles with navigation system) in the“Display screen, heater, air conditioner andaudio systems” section later in this manual.For vehicles without navigation system,see your NISSAN dealer.To turn on the autolight system: 1. Turn the headlight switch to the AUTO posi- tion ᭺. 1 LIC0562 2. Turn the ignition key to ON. Headlight beam select 3. The autolight system automatically turns the headlights on and off. ᭺ 1 To select the high beam function, push the lever forward. The high beam lights come onInitially, if the ignition switch is turned OFF and a and the light illuminates.door is opened and left open, the headlightsremain ON for 5 minutes. If another door is ᭺ 2 Pull the lever back to select the low beam.opened during the 5 minutes, then the 5 minutetimer is reset. ᭺ 3 Pulling and releasing the lever flashes the headlight high beams on and off.To turn the autolight system off, turn the switch tothe OFF, , or position. Battery saver systemBe sure you do not put anything on top of If the ignition switch is turned OFF while thethe autolight sensor located in the top side headlight switch is in the or posi-of the instrument panel. The autolight sen- tion, the headlights will turn off after 5 minutes.sor controls the autolight; if it is covered,2-24 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 93. After the headlights automatically turn off with the the parking brake is released. The daytime run-headlight switch in the or position, ning lights will remain on until the ignition switchthe headlights will illuminate again for 5 minutes if is turned off.the headlight switch is moved to the OFF positionand then turned to the or position. WARNING When the daytime running light system is CAUTION active, tail lights on your vehicle are not● Be sure to turn the light switch to the on. It is necessary at dusk to turn on your OFF position when you leave the ve- headlights. Failure to do so could cause hicle for extended periods of time, oth- an accident injuring yourself and others. erwise the battery will go dead.● Never leave the light switch on when the engine is not running for extended periods of time even if the headlights LIC0392 turn off automatically. INSTRUMENT BRIGHTNESSDAYTIME RUNNING LIGHT SYSTEM CONTROL(Canada only) The instrument brightness control operates when the headlight control switch is inThe headlights automatically illuminate at a re- the , or AUTO position (with auto-duced intensity when the engine is started with lights activated).the parking brake released. The daytime runninglights operate with the headlight switch in the Turn the control to adjust the brightness of instru-OFF position or in the position. Turn the ment panel lights when driving at night.headlight switch to the position for fullillumination when driving at night.If the parking brake is applied before the engine isstarted, the daytime running lights do not illumi-nate. The daytime running lights illuminate when Instruments and controls 2-25 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 94. HAZARD WARNING FLASHER SWITCH LIC0563 LIC0564 LIC0394TURN SIGNAL SWITCH FOG LIGHT SWITCH (if so equipped) Push the switch on to warn other drivers when you must stop or park under emergency condi-Turn signal To turn the fog lights on, turn the headlight switch tions. All turn signal lights flash. to the position, then turn the fog light᭺1 Move the lever up or down to signal the switch to the position. To turn them off, turning direction. When the turn is com- turn the fog light switch to the OFF position. WARNING pleted, the turn signals cancel automatically. ● If stopping for an emergency, be sure to The headlights must be on for the fog lights toLane change signal operate. move the vehicle well off the road. ● Do not use the hazard warning flashers᭺2 To signal a lane change, move the lever up or while moving on the highway unless down to the point where the indicator light begins to flash, but the lever does not latch. unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic.2-26 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 95. CARGO LAMP SWITCH HORN● Turn signals do not work when the haz- ard warning flasher lights are on.The flashers will operate with the ignition switchin any position.Some state laws may prohibit the use ofthe hazard warning flasher switch whiledriving. LIC0616 LIC0604 To turn on the cargo lamp, push the switch down To sound the horn, push the center pad area of to the ON position. The tailgate lights (if so the steering wheel. equipped) will also illuminate when the cargo lamp switch is in the ON position. WARNING Do not disassemble the horn. Doing so CAUTION could affect proper operation of the Be sure to turn the light switch to the OFF supplemental front air bag system. Tam- position when you leave the vehicle for pering with the supplemental front air bag extended periods of time, otherwise the system may result in serious personal battery will go dead. injury. Instruments and controls 2-27 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 96. HEATED SEAT (if so equipped) 3. When the seat is warmed or before you ● The battery could run down if the seat leave the vehicle, be sure to turn the switch heater is operated while the engine is off. not running. CAUTION ● Do not use the seat heater for extended periods or when no one is using the seat. ● Do not put anything on the seat which insulates heat, such as a blanket, cush- ion, seat cover, etc. Otherwise, the seat may become overheated. ● Do not place anything hard or heavy on LIC0469 the seat or pierce it with a pin or similar object. This may result in damage to theThe front seats are warmed by built-in heaters (if heater.so equipped). ● Any liquid spilled on the heated seat 1. Start the engine. should be removed immediately with a 2. Push the (low) or (high) posi- dry cloth. tion of the switch, as desired, depending on ● When cleaning the seat, never use the temperature. The indicator light in the gasoline, benzine, thinner, or any simi- switch will illuminate. lar materials. The heater is controlled by a thermostat, ● If any abnormalities are found or the automatically turning the heater on and off. heated seat does not operate, turn the The indicator light will remain on as long as switch off and have the system checked the switch is on. by your NISSAN dealer.2-28 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 97. VEHICLE DYNAMIC CONTROL (VDC) REAR SONAR SYSTEM OFF SWITCHOFF SWITCH (if so equipped) (if so equipped) the indicator light on the switch will illuminate. Push the switch again to enable the system. The indicator light will go off. The system will automatically reset the next time the ignition switch is turned on. See “Rear sonar system” in the “Starting and driving” section. WIC0534 LIC0471The vehicle should be driven with the Vehicle WARNINGDynamic Control (VDC) system on for most driv-ing conditions. The rear sonar system is a convenienceIf the vehicle is stuck in mud or snow, the VDC but it is not a substitute for proper back-system reduces the engine output to reduce ing. Always turn and check that it is safe towheel spin. The engine speed will be reduced do so before backing up. Always back upeven if the accelerator is depressed to the floor. If slowly.maximum engine power is needed to free a stuck The rear sonar system is active when the ignitionvehicle, turn the VDC system off. is in the ON position and the shift selector lever isTo turn off the VDC system, push the VDC OFF in R (Reverse).switch. The indicator will come on. When sensors detect obstacles within 6 ft (1.8Push the VDC OFF switch again or restart the m) of the rear bumper, a beeping tone is emitted.engine and the system will operate normally. See“Vehicle dynamic control (VDC) system” in the The rear sonar system can be disabled by push-“Starting and driving” section. ing the OFF switch. When the system is disabled, Instruments and controls 2-29 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 98. TOW MODE SWITCH POWER OUTLET LIC0594 LIC0678 WIC0643Tow mode should be used when pulling a heavy Front row 2nd row (if so equipped)trailer or hauling a heavy load. Using tow mode at The power outlets are for powering electrical CAUTIONother times may cause unnecessary transmission accessories such as cellular telephones.shifting and reduced fuel economy. ● The outlet and plug may be hot during The power outlets located on the driver’s side of or immediately after use.Press the tow mode switch to activate tow mode. the instrument panel and in the truck box areThe indicator light on the tow mode switch illumi- powered directly by the vehicle’s battery. ● Only certain power outlets are designednates when tow mode is selected. Press the tow for use with a cigarette lighter unit. Seemode switch again to turn tow mode OFF. The power outlets located on the passenger’s your NISSAN dealer for additional side of the instrument panel, inside the center information.Tow mode is automatically canceled when the armrest, and in the 2nd row are powered onlykey is turned OFF. ● Do not use with accessories that ex- when the ignition key is in the ACC or ON posi- ceed a 12 volt, 120W (10A) power draw.For additional information, refer to “Tow mode” in tion. Do not use double adapters or morethe “Technical and consumer information” sec- than one electrical accessory.tion later in this manual. Open the cap to use a power outlet.2-30 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 99. ● Push the plug in as far as it will go. If good contact is not made, the plug may overheat or the internal temperature fuse may blow. ● When not in use, be sure to close the cap. Do not allow water to contact the outlet. LIC0618 LIC0617 Inside center armrest (if so equipped) In truck box (if so equipped)● Use this power outlet with the engine Do not use the outlet located in the truck box with running. (If the engine is stopped, this accessories that exceed 12 volt, 120W (15A) could result in a discharged battery.) power draw . Do not use double adapters or more than one electrical accessory.● Avoid using when the air conditioner, headlights or rear window defroster is CAUTION on. For the power outlet located in the bed of● Before inserting or disconnecting a the truck, do not use with accessories that plug, be sure the electrical accessory exceed a 12 volt, 120W (15A) power draw. being used is turned OFF. Do not use double adapters or more than one electrical accessory. Instruments and controls 2-31 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 100. STORAGE CONSOLE BOX (if so equipped) WARNING The center console box should not be used while driving so full attention may be given to vehicle operation. CAUTION ● This power outlet is not designed for use with a cigarette lighter unit. ● Do not use accessories that exceed 12 volt, 120W (10A) power draw. Do not use LIC0565 LIC0566 double adapters or more than one elec- Side tray Center tray (if so equipped) trical accessory.INSTRUMENT PANEL STORAGETRAYS WARNINGDo not place sharp objects in the trays tohelp prevent injury in an accident or sud-den stop.The rubber mats can be removed for cleaning.2-32 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 101. LIC0574 WIC0642 LIC0591Console box storage trays Console box storage Console box lock Pull up on the lever ᭺ to open the console box lid 1 Use the master key to lock ᭺ or unlock ᭺ the 1 2 ᭺. 2 console box. Instruments and controls 2-33 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 102. LIC0621 LIC0578CENTER ARMREST STORAGE (if so GLOVE BOXequipped) Open the glove box by pulling the handle.To access the center armrest storage area, lowerthe center armrest and lift the lid. WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop.2-34 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 103. ● Do not leave sunglasses in the sun- glasses holder while parking in direct sunlight. The heat may damage the sunglasses. LIC0567 LIC0589SUNGLASSES HOLDER MAP POCKETSTo open the sunglasses holder, push and release. WARNINGThe sunglasses case should not be usedwhile driving so full attention may begiven to vehicle operation. CAUTION● Do not use for anything other than sunglasses. Instruments and controls 2-35 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 104. LIC0575 LIC0568 LIC0569SEATBACK POCKET (if so equipped) Small bin Medium bin OVERHEAD CONSOLE (if soThe seatback pocket is located on the back of thedriver’s seat. The pocket can be used to store equipped)maps. Storage bins WARNING Keep storage bins closed while driving to help prevent injury in an accident or a sudden stop. Push the button to open a storage bin. Push the lid up to close.2-36 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 105. LIC0552 LIC0620 LIC0553 Front — Type A Front — Type B Adjustable (if so equipped)CUP HOLDERS Position the arm on the adjustable cup holder so CAUTION that the cup is held securely.Open the lid to access the front cup holders. ● Avoid abrupt starting and braking when the cup holder is being used to prevent WARNING spilling the drink. If the liquid is hot, it can scald you or your passenger.The cup holder should not be used whiledriving so full attention may be given to ● Use only soft cups in the cup holder.vehicle operation. Hard objects can injure you in an accident. Instruments and controls 2-37 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 106. LIC0622 LIC0554 LIC0556 Armrest (if so equipped) 2nd row (rear of front console) 2nd row bench (if so equipped) (if so equipped) To open the 2nd row cup holders (rear of front console), lower the lid. To close, raise the lid.2-38 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 107. LIC0558 LIC0624 LIC0626 Bottle holder — Type A Bottle holder — Type B GROCERY HOOKS (if so equipped) CAUTION The grocery hooks allow for standard size plasticDo not use bottle holder for any other grocery bags to hang side by side.objects that could be thrown about in the To access the grocery hooks, fold up the rearvehicle and possibly injure people during bench seat. See “Folding the rear bench seat” insudden braking or an accident. the “Seats, restraints and supplemental air bag systems” section earlier in this manual. CAUTION Do not apply a total load of more than 18 lbs (8 kg) to a single grocery hook. Instruments and controls 2-39 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 108. WINDOWS CAUTION POWER WINDOWS (if so equipped) ● Do not store a total load of more than 22 WARNING lbs (10 kg) inside the storage compartment. ● Make sure that all passengers have their hands, etc. inside the vehicle while ● Do not use the storage compartment or it is in motion and before closing the storage compartment lid as a step. Do- windows. Use the window lock switch ing so may damage them. to prevent unexpected use of the power windows. ● Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls and become trapped in a window. Unattended chil- LIC0625 dren could become involved in seriousLOCKABLE BEDSIDE STORAGE accidents.COMPARTMENT (if so equipped)To access the bedside storage compartment,hold the key hole cover open and insert themaster key. Turn the key clockwise to unlock thelid.The tray inside the bedside storage compartmentis adjustable.The bedside storage compartment will automati-cally lock when the lid is closed. You do not needto use the key.2-40 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 109. OFF position. If the driver’s or passenger’s door is opened during this period of about 45 sec- onds, power to the windows is canceled. To open a window, push the switch and hold it down. To close a window, pull the switch and hold it up. To stop the opening or closing function at any time, simply release the switch. LIC0579 LIC05801. Window lock button Front passenger power window switch2. Door lock/unlock button The passenger window switch operates only the3. Front passenger side automatic switch corresponding passenger window. To open the4. Right rear passenger window switch window, push the switch and hold it down ᭺. To 15. Left rear passenger window switch close the window, pull the switch up ᭺. 26. Driver side automatic switch Locking passengers’ windowsDriver’s side power window switch When the window lock button is depressed, onlyThe driver’s side control panel is equipped with the driver side window can be opened or closed.switches to open or close the front and rear Push it again to cancel the window lock function.passenger windows.The power windows operate when the ignitionswitch is in the ON position, or for about 45seconds after the ignition switch is turned to the Instruments and controls 2-41 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 110. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs. WARNING There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window. If the control unit detects something caught in a LIC0581 LIC0410 window equipped with automatic operation as it is closing, the window will be immediately low-Rear power window switch Automatic operation ered.The rear passenger window switches open or To fully open a window equipped with automaticclose only the corresponding passenger window. operation, press the window switch down (onlyTo open the window, push the switch and hold it driver’s side shown) to the second detent anddown ᭺. To close the window, pull the switch up 1 release it; it need not be held. The window auto-᭺. 2 matically opens all the way. To stop the window, lift the switch up while the window is opening. To fully close a window equipped with automatic operation, pull the switch up to the second detent and release it; it need not be held. Auto-reverse function The auto-reverse function can be activated when a window is closed by automatic operation.2-42 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 111. SUNROOF (if so equipped) WIC0263 LIC0627 WIC0647MANUAL WINDOWS REAR SLIDING WINDOW (if so AUTOMATIC SUNROOFThe side windows can be opened or closed by equipped) The sunroof will only operate when the ignitionturning the hand crank on each door. Squeeze the handles of the lever ᭺, then slide 1 key is in the ON position. The automatic sunroof the window open ᭺. 2 is operational for about 45 seconds, even if the ignition key is turned to the ACC or OFF position. If the driver’s door or the front passenger’s door is opened during this period of about 45 sec- onds, power to the sunroof is canceled. Sliding the sunroof To fully open the sunroof, push the switch toward the open position ᭺.3 To fully close the sunroof, push the switch toward the close position ᭺.4 Instruments and controls 2-43 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 112. To open or close the sunroof part way, push the Auto reverse function (when closing or If the auto reverse function malfunctions and re-switch in any direction ᭺ while the roof is sliding 5 tilting down the sunroof) peats opening or tilting up the sunroof, keepopen or closed to stop it in the desired position. pushing the tilt down switch within 5 seconds The auto reverse function can be activated when after it happens, then the sunroof will fully closeTilting the sunroof the sunroof is closed or tilted down by automatic gradually. In this case, make sure nothing isTo tilt the sunroof up, push the tilt switch toward operation when the ignition key is in the ON caught in the sunroof.the up position ᭺.1 position or for about 45 seconds after the ignition key is turned to the OFF position. WARNINGTo tilt the sunroof down, push the tilt switch Depending on the environment or driving ● In an accident you could be thrown fromtoward the down position ᭺. 2 conditions, the auto reverse function may the vehicle through an open sunroof.Restarting the sunroof sliding switch be activated if an impact or load similar to Always use seat belts and child something being caught in the sunroof oc- restraints.The sliding switch will become inoperable after curs.the battery terminal is disconnected, the electri- ● Do not allow anyone to stand up orcal supply interrupted and/or some abnormality WARNING extend any portion of their body out ofdetected. Use the following reset procedure to the sunroof opening while the vehicle is There are some small distances immedi- in motion or while the sunroof isreturn sunroof operation to normal. ately before the closed position which closing. 1. If the sunroof lid is open, push the tilting cannot be detected. Make sure that all switch repeatedly toward the down position passengers have their hands, etc., inside CAUTION ᭺ to fully close the lid. 2 the vehicle before closing the sunroof. ● Remove water drops, snow, ice or sand 2. Finally, push and hold the tilting switch for When closing: from the sunroof before opening. more than 2 seconds toward the down po- If the control unit detects something caught in the ● Do not place heavy objects on the sun- sition ᭺ to reestablish the lid’s home posi- 2 sunroof as it moves to the front, the sunroof will roof or surrounding area. tion. immediately open backward. The sunroof should now operate normally. When tilting down: Sun shade If the control unit detects something caught in the Open and close the sun shade by sliding it for- sunroof as it tilts down, the sunroof will immedi- ward or backward. ately tilt up.2-44 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 113. INTERIOR LIGHTIf the sunroof does not closeHave your NISSAN dealer check and repair thesunroof. LIC0585 LIC0630 Type A Type B The interior light has a three-position switch and are closed and the ignition switch is in the operates regardless of ignition switch position. OFF position. When the switch is in the ON position ᭺, the 1 ● The driver’s door is opened and then closed interior lights illuminate, regardless of door posi- while the key is removed from the ignition tion. The lights will go off after about 30 minutes switch. unless the ignition key is in the ACC or ON ● The key is removed from the ignition switch position. while all doors are closed. When the switch is in the DOOR or normal The lights will turn off while the 30 second timer is operation position ᭺, the interior lights, puddle 2 activated when: lamps and cargo light (if so equipped) will stay on for about 30 seconds when: ● The driver’s door is locked by the keyfob, a key, or the power door lock switch. ● The doors are unlocked by the keyfob, a key or the power door lock switch while all doors ● The ignition switch is turned ON. Instruments and controls 2-45 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 114. PERSONAL LIGHTS (if so equipped)When the switch is in the OFF position ᭺, the 3interior lights do not illuminate, regardless of doorposition. The puddle lamps and cargo light (if soequipped) come on when any front or rear pas-senger door is opened.The lights will turn off automatically after 30 min-utes while doors are open to prevent the batteryfrom becoming discharged.NOTE:The footwell and door step lights (if soequipped) illuminate when the driver andpassenger doors are open regardless ofthe interior light switch position. These LIC0587 LIC0623lights will turn off automatically after about30 minutes while doors are open to prevent CONSOLE LIGHT (if so equipped) The personal lights on the overhead console can be swiveled 360 degrees. To turn on the light,the battery from becoming discharged. The console light ᭺ will turn on whenever the 1 press the button. Press the button again to turn parking lights or headlights are illuminated. off the light. CAUTION The console light brightness can be adjustedDo not use for extended periods of time with the illumination brightness control.with the engine stopped. This could resultin a discharged battery.2-46 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 115. MAP LIGHTS (if so equipped) HOMELINKா UNIVERSAL TRANSCEIVER (if so equipped) The HomeLinkா Universal Transceiver provides a WARNING convenient way to consolidate the functions of up to three individual hand-held transmitters into ● Do not use the HomeLinkா Universal one built-in device. Transceiver with any garage door opener that lacks safety stop and re- HomeLinkா Universal Transceiver: verse features as required by federal ● Will operate most Radio Frequency (RF) safety standards. (These standards be- devices such as garage doors, gates, home came effective for opener models manufactured after April 1, 1982). A ga- and office lighting, entry door locks and se- rage door opener which cannot detect curity systems. an object in the path of a closing garage ● Is powered by your vehicle’s battery. No door and then automatically stop and separate batteries are required. If the vehi- reverse, does not meet current federal cle’s battery is discharged or is discon- safety standards. Using a garage door LIC0586 nected, HomeLinkா will retain all program- opener without these features in- ming. creases the risk of serious injury orTo turn the map lights on, press the switches. To death.turn them off, press the switches again. Once the HomeLinkா Universal Transceiver ● During the programming procedure is programmed, retain the original trans- your garage door or security gate will CAUTION mitter for future programming procedures open and close (if the transmitter isDo not use for extended periods of time (i.e., new vehicle purchases). Upon sale of within range). Make sure that people orwith the engine stopped. This could result the vehicle, the programmed HomeLinkா objects are clear of the garage door,in a discharged battery. Universal Transceiver buttons should be gate, etc. that you are programming. erased for security purposes. For addi- tional information refer to “Programming ● Your vehicle’s engine should be turned HomeLinkா” later in this section. off while programming the HomeLinkா Universal Transceiver. Instruments and controls 2-47 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 116. 4. Hold down both buttons until the indicator light on the HomeLinkா flashes, changing from a “slow blink” to a “rapidly flashing blink”. This could take up to 90 seconds. When the indicator light flashes rapidly, both buttons may be released. The rapidly flash- ing light indicates successful programming. To activate the garage door or other pro- grammed device, press and hold the pro- grammed HomeLinkா button — releasing when the device begins to activate. 5. If the indicator light on the HomeLinkா blinks rapidly for 2 seconds and then turns solid, LIC0526 LIC0527 HomeLinkா has picked up a “rolling code”PROGRAMMING HOMELINKா 3. Using both hands, simultaneously press and garage door opener signal. You will need to hold both the HomeLinkா button you want to proceed with the next steps to train the 1. To begin, press and hold the two outer program and the hand-held transmitter but- HomeLinkா to complete the programming HomeLinkா buttons (to clear the memory) which may require a ladder and another per- ton. until the indicator light ᭺ blinks slowly (after 1 son for convenience. 20 seconds). Release both buttons. DO NOT release the buttons until step 4 has been completed. 6. Press and release the “smart” or “learn” pro- 2. Position the end of the hand-held transmitter gram button located on the garage door 1 - 3 inches (26 - 76 mm) away from the opener’s motor to activate the “training HomeLinkா surface. mode”. This button is usually located near the antenna wire that hangs down from the motor. If the wire originates from under a light lens, you will need to remove the lens to access the program button.2-48 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 117. NOTE: PROGRAMMING HOMELINKா FOR PROGRAMMING TROUBLE-Once you have pressed and released the CANADIAN CUSTOMERS DIAGNOSISprogram button on the garage door open- Prior to 1992, D.O.C. regulations required hand- If the HomeLinkா does not quickly learn the hand-er’s motor and the “training light” is lit, you held transmitters to stop transmitting after 2 sec- held transmitter information:have 30 seconds in which to perform step 7. onds. To program your hand-held transmitter toUse the help of a second person for conve- ● replace the hand-held transmitter batteries HomeLinkா, continue to press and hold thenience to assist when performing this step. with new batteries. HomeLinkா button (note steps 2 - 4 under “Pro- 7. Within 30 seconds of pressing and releas- gramming HomeLinkா”) while you press and re- ● position the hand-held transmitter with its ing the garage door opener program button, press (“cycle”) your hand-held transmitters every battery area facing away from the quickly and firmly press and release the 2 seconds until the indicator light flashes rapidly HomeLinkா surface. HomeLinkா button you’ve just programmed. (indicating successful programming). ● press and hold both the HomeLinkா and Press and release the HomeLinkா button up NOTE: hand-held transmitter buttons without inter- to 3 times to complete the training. ruption. 8. Your HomeLinkா button should now be pro- When programming a garage door opener, etc., it is advised to unplug the device dur- ● position the hand-held transmitter 1 - 3 grammed. (To program the remaining ing the “cycling” process to prevent pos- inches (26 - 76 mm) away from the HomeLinkா buttons for additional door or sible damage to the garage door opener HomeLinkா surface. Hold the transmitter in gate openers, follow steps 2-8 only.) components. that position for up to 15 seconds. If HomeLinkா is not programmed within thatNOTE: OPERATING THE HOMELINKா time, try holding the transmitter in anotherDo not repeat step 1 unless you want to UNIVERSAL TRANSCEIVER position – keeping the indicator light in view“clear” all previously programmed at all times.HomeLinkா buttons. The HomeLinkா Universal Transceiver (once pro- grammed) may now be used to activate the ga- If you continue to have programming difficulties,If you have any questions or are having difficulty rage door, etc. To operate, simply press the ap- please contact the NISSAN Consumer Affairsprogramming your HomeLinkா buttons, please propriate programmed HomeLinkா Universal Department. The phone numbers are located inrefer to the HomeLinkா web site at: Transceiver button. The red indicator light will the Foreword of this manual.www.homelink.com or call 1-800-NISSAN-1 (1- illuminate while the signal is being transmitted.800-647-7261). Instruments and controls 2-49 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 118. CLEARING THE PROGRAMMED that was just programmed. This procedure will DOC: ISTC 1763K1313INFORMATION not affect any other programmed HomeLinkா FCC I.D. CV2V67690 buttons.Individual buttons cannot be cleared. However,to clear all programming, press and hold the two IF YOUR VEHICLE IS STOLENoutside buttons and release when the indicator If your vehicle is stolen, you should change thelight begins to flash (approximately 20 seconds). codes of any non-rolling code device that has been programmed into HomeLinkா. Consult theREPROGRAMMING A SINGLE Owner’s Manual of each device or call the manu-HOMELINKா BUTTON facturer or dealer of those devices for additional information.To reprogram a HomeLinkா Universal Transceiverbutton, complete the following. When your vehicle is recovered, you will need to reprogram the HomeLinkா Univer- 1. Press and hold the desired HomeLinkா but- sal Transceiver with your new transmitter ton. Do not release the button until step 4 information. has been completed. FCC Notice: 2. When the indicator light begins to flash slowly (after 20 seconds), position the This device complies with FCC rules part hand-held transmitter 1 - 3 inches (26 - 76 15. Operation is subject to the following mm) away from the HomeLinkா surface. two conditions: (1) This device may not cause harmful interference and (2) This de- 3. Press and hold the hand-held transmitter vice must accept any interference that may button. be received, including interference that 4. The HomeLinkா indicator light will flash, first may cause undesired operation. slowly and then rapidly. When the indicator This transmitter has been tested and com- light begins to flash rapidly, release both plies with FCC and DOC/MDC rules. buttons. Changes or modifications not expressly ap-The HomeLinkா Universal Transceiver button has proved by the party responsible for compli-now been reprogrammed. The new device can ance could void the user’s authority to op-be activated by pushing the HomeLinkா button erate the device.2-50 Instruments and controls ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 119. 3 Pre-driving checks and adjustmentsKeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13 Nissan vehicle immobilizer system (NVIS) Tilt operation (if so equipped) . . . . . . . . . . . . . . . . . . . 3-13 keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Pedal position adjustment (if so equipped) . . . . . . . . . . 3-13Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14 Locking with key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15 Locking with inside lock knob . . . . . . . . . . . . . . . . . . . . 3-4 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15 Locking with power door lock switch Inside mirror (if so equipped). . . . . . . . . . . . . . . . . . . . 3-15 (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Automatic anti-glare inside mirror Wide Open doors (if so equipped) . . . . . . . . . . . . . . . 3-5 (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16 Child safety rear door lock Outside mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16 (Crew Cab models only) . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Truck box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19Remote keyless entry system (if so equipped). . . . . . . . . 3-7 Tailgate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19 How to use remote keyless entry system . . . . . . . . . . 3-7 Tie down hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21 Battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 Automatic drive positioner (if so equipped) . . . . . . . . . . 3-21Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 Memory storage function . . . . . . . . . . . . . . . . . . . . . . . 3-22Fuel filler lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 Entry/exit function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23 Fuel filler cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 System operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/22/03—skoniecz ੭
  • 120. KEYS A key number is only necessary when you have previously registered into the NISSAN Vehicle lost all keys and do not have one to duplicate Immobilizer System. After the registration pro- from. If you still have a key, your NISSAN dealer cess, these components will only recognize keys can duplicate it. coded into the NISSAN Vehicle Immobilizer Sys- tem (NVIS) during registration. Any key that is not NISSAN VEHICLE IMMOBILIZER given to your dealer at the time of registration will SYSTEM (NVIS) KEYS no longer be able to start your vehicle. You can only drive your vehicle using the master Do not allow the immobilizer system key, which or valet keys which are registered to the NISSAN contains an electrical transponder, to come into Vehicle Immobilizer System components in your contact with salt water. This could affect system vehicle. These keys have a transponder chip in function. the key head. The master key can be used for all the locks. WPD01281. Two master keys (black) with transpon- The valet key cannot be used for the console box lock. der chip and chrome NISSAN brand symbol on one side To protect belongings when you leave a key with2. Valet key (black) with transponder chip someone, give them the valet key only.3. Key number plate Never leave these keys in the vehicle.4. Transponder chip Additional or replacement keys:A key number plate is supplied with your keys.Record the key number and keep it in a safe place If you still have a key, the key number is not(such as your wallet), not in the vehicle. If you lose necessary when you need extra NISSAN Vehicleyour keys, see a NISSAN dealer for duplicates by Immobilizer System keys. Your dealer can dupli-using the key number. NISSAN does not record cate your existing key. As many as five NVIS keyskey numbers so it is very important to keep track can be used with one vehicle. You should bring allof your key number plate. NVIS keys that you have to your NISSAN dealer for registration. This is because the registration process will erase the memory of all key codes3-2 Pre-driving checks and adjustments ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 121. DOORS Turning the key one time toward the rear ᭺ of the 2 WARNING vehicle unlocks that door. From that position,● Always have the doors locked while returning the key to neutral ᭺ (where the key can 3 driving. Along with the use of seat belts, only be removed and inserted) and turning it this provides greater safety in the event toward the rear again within 5 seconds unlocks of an accident by helping to prevent all doors ᭺. 4 persons from being thrown from the vehicle. This also helps keep children Opening and closing windows and others from unintentionally open- The driver’s door key operation allows you to ing the doors, and will help keep out open and close windows equipped with auto- intruders. matic operation at the same time.● Before opening any door, always look ● To open the windows, turn the driver’s door for and avoid oncoming traffic. key toward the rear of the vehicle for longer● Do not leave children unattended inside LPD0240 than 1 second after the door is unlocked. the vehicle. They could unknowingly ac- Driver’s side ● To close the windows, turn the driver’s door tivate switches or controls. Unattended key to the front of the vehicle for longer children could become involved in seri- LOCKING WITH KEY than 1 second after the door is locked. ous accidents. Manual Windows stop when the key cylinder is released. To lock a door, turn the key toward the front of the vehicle ᭺. To unlock, turn the key toward the rear 1 ᭺4 . Power The power door lock system allows you to lock or unlock all doors at the same time. Turning the key toward the front ᭺ of the vehicle 1 locks all doors. Pre-driving checks and adjustments 3-3 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 122. Lockout protection When the power door lock switch (driver or front passenger) is moved to the lock position with the key in the ignition and any door open, all doors will lock and unlock automatically. This helps to prevent the keys from being accidently locked inside the vehicle. LPD0241 LPD0183 Inside lock Door lock switchLOCKING WITH INSIDE LOCK LOCKING WITH POWER DOORKNOB LOCK SWITCH (if so equipped)To lock the door without the key, move the inside To lock all the doors without a key, push the doorlock knob to the lock position ᭺, then close the 1 lock switch (driver or front passenger side), to thedoor. lock position ᭺, then close the door. When 1To unlock the door without the key, move the locking the door this way, be certain not to leaveinside lock knob to the unlock position ᭺. 2 the key inside the vehicle. To unlock all the doors without a key, push the door lock switch (driver or front passenger side) to the unlock position ᭺. 23-4 Pre-driving checks and adjustments ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 123. LPD0278 LPD0266 LPD0267WIDE OPEN DOORS (if so equipped) 2. From the outside, pull the door handle ᭺ 1 From the inside, pull the inside door handle to- toward you. ward you. The door will unlock automatically. CAUTIONDo not open the Wide Open door to thefull open position while the fuel filler dooris open; only open it as far as the firstdetent. Opening the door to the full openposition may damage the fuel filler doorand Wide Open door.The Wide Open doors open nearly 180° to allowaccess to the rear of the cab. 1. Open the driver’s or passenger’s door. Pre-driving checks and adjustments 3-5 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/22/03—skoniecz ੭
  • 124. LPD0265 LPD0242 3. Open the door to the desired position. CHILD SAFETY REAR DOOR LOCK (Crew Cab models only) Child safety locks help prevent the rear doors from being opened accidentally, especially when small children are in the vehicle. The child safety lock levers are located on the edge of the rear doors. When the lever is in the lock position, the door can be opened only from the outside.3-6 Pre-driving checks and adjustments ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 125. REMOTE KEYLESS ENTRY SYSTEM(if so equipped)It is possible to lock/unlock all doors, turn on the CAUTIONinterior lights and puddle lamps (if so equipped),and activate the panic alarm by using the keyfob Listed below are conditions or occur-from outside the vehicle. rences which will damage the keyfob:Some settings for the keyfob, such as horn beep, ● Do not allow the keyfob to become wet.can be adjusted. For vehicles without navigation ● Do not drop the keyfob.system, refer to “Silencing the horn beep feature”later in this section. For vehicles with navigation ● Do not strike the keyfob sharply againstsystem, refer to “Vehicle electronic systems” in another object.the “Display screen, heater, air conditioner and ● Do not place the keyfob for an extendedaudio systems” section later in this manual. period in an area where temperaturesBe sure to remove the key from the vehicle exceed 140°F (60°C).before locking the doors. If a keyfob is lost or stolen, NISSAN rec- ommends erasing the ID code of that key- LPD0209The keyfob can operate at a maximum distance of fob. This will prevent the keyfob from un- HOW TO USE REMOTE KEYLESSapproximately 33 ft (10 m) from the vehicle. The authorized use to unlock the vehicle. Foreffective distance depends upon the conditions information regarding the erasing proce- ENTRY SYSTEMaround the vehicle. dure, please contact a NISSAN dealer. Locking doorsAs many as 5 keyfobs can be used with onevehicle. For information concerning the purchase 1. Close all windows.and use of additional keyfobs, contact a NISSAN 2. Remove the key from the ignition switch.dealer. 3. Close the hood and all doors.The keyfob will not function when: 4. Push the button on the keyfob. All ● the battery is discharged. the doors lock. The hazard warning lights ● the distance between the vehicle and the flash twice and the horn beeps once to keyfob is over 33 ft (10 m). indicate all doors are locked.The panic alarm will not activate when the ● When the button is pushed with allkey is in the ignition switch. doors locked, the hazard warning lights flash Pre-driving checks and adjustments 3-7 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 126. twice and the horn beeps once as a re- Push the button on the keyfob again within minder that the doors are already locked. 5 seconds. ● If a door is open and you push the ● All doors unlock. button, the doors will lock but the horn will ● The hazard indicator flashes once if all doors not beep and the hazard warning lights will are completely closed. not flash. The interior lights can be turned off without wait-The horn may or may not beep. For vehicles ing 30 seconds by inserting the key into thewithout navigation system, refer to “Silencing the ignition and turning to the ON or START position,horn beep feature” later in this section. For ve- locking the doors with the keyfob or pushing thehicles with navigation system, refer to “Vehicle interior light switch to the off position.electronic systems” in the “Display screen,heater, air conditioner and audio systems” sec- Auto relocktion later in this manual. LPD0210 When the button on the keyfob is pushed, all doors will lock automatically within 1 minute Unlocking doors unless one of the following operations is per- formed: Push the button on the keyfob once. ● Any door is opened. ● Only the driver’s door unlocks. ● A key is inserted into the ignition switch and ● The hazard indicator flashes once if all doors the key is turned from OFF to ON. are completely closed with the ignition key in any position except the ON position. Linking the keyfob to automatic drive ● The interior lights and puddle lamps (if so positioner memory equipped) turn on and the light timer acti- If the vehicle is equipped with automatic drive vates for 30 seconds when the interior light positioner, the keyfob can be linked to a memory switch is in the DOOR position with the setting. ignition key in any position except the ON See “Automatic driver positioner” later in this position. section.3-8 Pre-driving checks and adjustments ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 127. Deactivating the horn beep feature does not si- lence the horn if the alarm is triggered. Using the interior lights Push the button on the keyfob once to turn on the interior lights and puddle lamps (if so equipped). The interior lights can be turned off without wait- ing 30 seconds by inserting the key into the ignition, locking the doors with the keyfob or pushing the interior light switch to off position. LPD0211 LPD0262Using the panic alarm Silencing the horn beep featureIf you are near your vehicle and feel threatened, If desired, the horn beep feature can be deacti-you may activate the panic alarm to call attention vated using the keyfob.by pushing and holding the button on thekeyfob for longer than 0.5 second. To deactivate: Press and hold the and buttons for at least 2 seconds.The panic alarm and headlights will stay on for 25seconds. The hazard lights will flash three times to confirm that the horn beep feature has been deactivated.The panic alarm stops when: To activate: Press and hold the ● it has run for 25 seconds, or and buttons for at least 2 seconds ● any button is pushed on the keyfob. once more. The hazard lights will flash once and the horn will sound once to confirm that the horn beep feature has been reactivated. Pre-driving checks and adjustments 3-9 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 128. 5. Press the button, then the button two or three times to check the key- fob operation. If the battery is removed for any reason other than replacement, perform step 5. ● An improperly disposed battery can hurt the environment. Always confirm local regulations for battery disposal. ● The keyfob is water-resistant; how- ever, if it does get wet, immediately wipe completely dry. ● The operational range of the keyfob extends to approximately 33 ft (10 m) from the vehicle. This range may vary with conditions. FCC Notice: Changes or modifications not expressly ap- proved by the manufacturer for compliance could void the user’s authority to operate the equipment. LPD0214 This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada.BATTERY REPLACEMENT ᭺ 3 Install a new battery with the “+” facing down. Operation is subject to the following twoReplace the battery in the keyfob as follows: conditions: (1) This device may not cause Recommended battery: Sanyo CR2025 or harmful interference, and (2) this device᭺1 Open the lid using a coin. equivalent. must accept any interference received, in-᭺2 Remove the battery. ᭺ 4 Close the lid securely. cluding interference that may cause undes- ired operation of the device.3-10 Pre-driving checks and adjustments ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 129. HOOD FUEL FILLER LID LPD0184 LPD0263᭺1 Pull the hood lock release handle located WARNING FUEL FILLER CAP below the driver side instrument panel. The hood will spring up slightly. ● Make sure the hood is completely The fuel filler cap is a ratcheting type. Turn the closed and latched before driving. Fail- cap counterclockwise to remove. To tighten, turn᭺2 Push the lever at the front of the hood to the ure to do so could cause the hood to fly the cap clockwise until ratcheting clicks are side as illustrated with your fingertips and open and result in an accident. heard. raise the hood. ● If you see steam or smoke coming fromWhen closing the hood, lower it slowly and make the engine compartment, to avoid injury WARNINGsure it locks into place. do not open the hood. ● Gasoline is extremely flammable and highly explosive under certain condi- tions. You could be burned or seriously injured if it is misused or mishandled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refueling. Pre-driving checks and adjustments 3-11 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 130. ● Fuel may be under pressure. Turn the – Always place the container on the ● Tighten until the fuel filler cap clicks. cap a third of a turn, and wait for any ground when filling. Failure to tighten the fuel filler cap “hissing” sound to stop to prevent fuel properly may cause the mal- – Do not use electronic devices when from spraying out and possibly causing filling. function indicator lamp (MIL) to illumi- personal injury. Then remove the cap. – Keep the pump nozzle in contact with nate. If the lamp illuminates be-● Do not attempt to top off the fuel tank the container while you are filling it. cause the fuel filler cap is loose or after the fuel pump nozzle shuts off automatically. Continued refueling may – Use only approved portable fuel con- missing, tighten or install the cap and cause fuel overflow, resulting in fuel tainers for flammable liquid. continue to drive the vehicle. spray and possibly a fire. The lamp should turn off after a● Use only an original equipment type CAUTION few driving trips. If the lamp fuel filler cap as a replacement. It has a ● If fuel is spilled on the vehicle body, built-in safety valve needed for proper does not turn off after a few driving flush it away with water to avoid paint trips, have the vehicle inspected by a operation of the fuel system and emis- damage. sion control system. An incorrect cap NISSAN dealer. can result in a serious malfunction and ● For additional information, see the possible injury. It could also cause the “Malfunction indicator lamp (MIL)” in malfunction indicator lamp to come on. the “Instruments and Controls” section● Never pour fuel into the throttle body to earlier in this manual. attempt to start your vehicle.● Do not fill a portable fuel container on a truck bed liner, rubber truck bed mad, or other insulating material. Static elec- tricity can cause an explosion of flam- mable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when filling portable fuel containers:3-12 Pre-driving checks and adjustments ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 131. STEERING WHEEL PEDAL POSITION ADJUSTMENT (if so equipped) CAUTION Do not adjust the pedal position with your foot on the pedal. LPD0254 LPD0255TILT OPERATION (if so equipped) The accelerator and brake pedals can be ad- justed for driving comfort.Pull the lock lever forward and hold it to adjust thesteering wheel up or down to the desired posi- Use the pedal adjusting switch to adjust thetion. brake and accelerator pedal position forward ᭺ 1 or backward ᭺. Pedal adjustment can only be 2Release the lock lever to lock the steering wheelin place. performed when: ● Ignition switch is in the OFF or ACC position WARNING ● Ignition switch is ON and the selector leverDo not adjust the steering wheel while is in the P (Park) positiondriving. You could lose control of yourvehicle and cause an accident. The brake and accelerator pedals cannot be ad- justed separately. Pre-driving checks and adjustments 3-13 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 132. SUN VISORS CAUTION ● Do not store the sun visor before return- ing it to its original position. ● Store the main sun visor after storing the extension sun visor and sub-sun visor. ● Do not pull the extension sun visor forc- edly downward. LPD0264 Type B ᭺ 1 To block glare from the front, swing down the main sun visor. ᭺ 2 To block glare from the side, remove the main sun visor from the center mount and swing the visor to the side. LPD0273 ᭺ 3 To block glare from the side and front, swing Type A down the sub-sun visor (if so equipped). ᭺ 4 Slide the extension sun visor (if so equipped) in or out as needed.3-14 Pre-driving checks and adjustments ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 133. MIRRORS WPD0168 LPD0257 WPD0126 Type A Type B INSIDE MIRROR (if so equipped)VANITY MIRRORS The night position ᭺ reduces glare from the 1To access the vanity mirror, pull the sun visor headlights of vehicles behind you at night.down and flip open the mirror cover (if soequipped). Some vanity mirrors are illuminated Use the day position ᭺ when driving in daylight 2and turn on when the mirror cover is open. hours. WARNING Use the night position only when neces- sary, because it reduces rear view clarity. Pre-driving checks and adjustments 3-15 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/12/03—skoniecz ੭
  • 134. Transceiver” in the “Instrument and controls” sec- tion of this manual. OUTSIDE MIRRORS WARNING ● Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. LPD0258 ● Do not adjust the mirrors while driving. LPD0237 You could lose control of your vehicleAUTOMATIC ANTI-GLARE INSIDE and cause an accident. Electric control type (if so equipped)MIRROR (if so equipped) The outside mirror remote control will operateThe inside mirror is designed so that it automati- only when the ignition switch is in the ACC or ONcally changes reflection according to the intensity position.of the headlights of the vehicle following you. Move the small switch ᭺ to select the right or left 1 mirror. Adjust each mirror to the desired positionWhen the switch is in the ON position, the using the large switch ᭺.2indicator light ᭺ will illuminate and excessive 1glare from the headlights of the vehicle behindyou will be reduced. When the switch of theinside mirror is in the OFF position, the insidemirror will operate normally.For information on HomeLinkா Universal Trans-ceiver operation, see the “HomeLinkா Universal3-16 Pre-driving checks and adjustments ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 135. Use the outside mirror remote control to adjust the top portion of the trailer tow mirror. The lower portion of the trailer tow mirror can be moved manually in any direction for a better rear view. WPD0170 LPD0279Manual control type Trailer tow mirrors (if so equipped)The outside mirror can be moved in any directionfor a better rear view. WARNING ● Objects viewed in the convex portion of the trailer tow mirror are closer than they appear. Be careful when changing lanes or turning. Using only the convex mirror could cause an accident. Use the other mirrors or glance over your shoul- der to properly judge distances to other objects. ● Do not adjust the mirrors while driving. You could lose control of your vehicle and cause an accident. Pre-driving checks and adjustments 3-17 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 136. Heated mirrors (if so equipped) Some outside mirrors can be heated to defrost, defog, or de-ice for improved visibility. For addi- tional information, see “Heated mirror switch” in the “Instrument and controls” section of this manual. LPD0268 LPD0259Pull the trailer tow mirror outward to extend it to Type Athe desired position for better visibility while tow- Foldable outside mirrorsing a trailer. Pull the outside mirror toward the door to fold it. WARNINGDo not extend or retract mirrors while driv-ing. You may lose control of your vehicleand cause an accident. CAUTIONDriving in tight spaces with mirrors ex-tended may cause damage to the vehicle.3-18 Pre-driving checks and adjustments ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 137. TRUCK BOX For proper truck box loading see “Loading tips” under the “Vehicle loading information” heading in the “Technical and consumer information” sec- tion of this manual. WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a colli- sion, people riding in these areas are more likely to be seriously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with LPD0269 LPD0270 seats and seat belts.Type B ● Be sure everyone in your vehicle is in a seat and using a seat belt properly. TAILGATE Opening the tailgate Pull the tailgate handle upward and lower the tailgate. The support cables hold the tailgate open. When closing the tailgate, make sure the latches are securely locked. Do not drive the vehicle with the tailgate down, unless equipped with NISSAN’s Bed Extender (accessory) or equivalent in the extended position. Pre-driving checks and adjustments 3-19 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 138. 2. Hold the tailgate at a 45 degree angle. 3. Pull the tailgate out from the right side hinge. 4. Slide the tailgate out of the left side hinge. Installing the tailgate 1. Insert the tailgate into the left side hinge. 2. Hold the tailgate at a 45 degree angle and insert into the right side hinge. 3. Continue to hold the tailgate at a 45 degree angle and attach the tailgate support cables. 4. Close the tailgate securely. LPD0271 LPD0272Removing the tailgate Locking the tailgate 1. Release the tailgate support cables. To lock the tailgate, turn the key toward the pas- senger side of the vehicle ᭺. To unlock, turn the 1 CAUTION key toward the driver side ᭺. 2● The tailgate is heavy. Two people should remove or install it. Be careful not to drop it during removal.● After releasing the support cables, do not let the tailgate rest on the bumper.3-20 Pre-driving checks and adjustments ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 139. AUTOMATIC DRIVE POSITIONER (if so equipped) The automatic drive positioner system has two WARNING features: ● Properly secure all cargo with ropes or straps to help prevent it from sliding or ● Memory storage function shifting. In a sudden stop or collision, ● Entry/exit function unsecured cargo could cause personal injury. LTI0102TIE DOWN HOOKSFor your convenience, tie down hooks are placedat each corner of the truck box. These may beused to help secure cargo loaded into the truckbox. ● The weight of the cargo load must be evenly distributed over both the front and the rear axles. ● All cargo should be securely fastened with ropes or straps to prevent it from shifting or sliding within the vehicle. Pre-driving checks and adjustments 3-21 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/12/03—skoniecz ੭
  • 140. 3. Adjust the driver’s seat, accelerator and 2. While the indicator light for the memory brake pedals, and outside mirrors to the switch being set is illuminated for 5 sec- desired positions by manually operating onds, press the button on the keyfob. each adjusting switch. For additional infor- The indicator light will blink. After the indica- mation, see “Seats” in the “Safety—Seats, tor light goes off, the keyfob is linked to that seat belts and supplemental air bags” sec- memory setting. tion and “Pedal position adjustment” and With the key removed from the ignition switch, “Outside mirrors” earlier in this section. press the button on the keyfob. The driv- During this step, do not turn the ignition to er’s seat, accelerator and brake pedals, and out- any position other than ON. side mirrors will move to the memorized position. 4. Push the SET switch and, within 5 seconds, Confirming memory storage push the memory switch (1 or 2) fully for at least 1 second. ● Turn the ignition ON and push the SET LPD0260 switch. If the main memory has not been The indicator light for the pushed memoryMEMORY STORAGE FUNCTION switch will come on and stay on for approxi- stored, the indicator light will come on for mately 5 seconds after pushing the switch. approximately 0.5 seconds. When theTwo positions for the driver’s seat, accelerator memory has stored the position, the indica- After the indicator light goes off, the se-and brake pedals, and outside mirrors can be tor light will stay on for approximately 5 sec- lected positions are stored in the selectedstored in the automatic drive positioner memory. onds. memory (1 or 2).Follow these procedures to use the memory sys-tem. If memory is stored in the same memory switch, ● If the battery cable is disconnected, or if the the previous memory will be deleted. fuse blows, the memory will be canceled. In 1. Set the automatic transmission selector le- such a case, reset the desired positions ver to the P (Park) position. Linking a keyfob to a stored memory using the following procedures. 2. Turn the ignition ON. position 1. Open and close the driver’s door more than A keyfob can be linked to a stored memory posi- two times with the ignition key in the LOCK tion with the following procedure. position. 1. Follow the steps for storing a memory posi- tion.3-22 Pre-driving checks and adjustments ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 141. 2. Reset the desired position using the previ- automatic transmission selector lever is in ● when the adjusting switch for the driver’s ous procedure. the P (Park) position. seat is turned on while the automatic drive positioner is operating.Selecting the memorized position The driver’s seat will return to previous position: ● when the memory switch (1 or 2) is not 1. Set the automatic transmission selector le- ● When the key is inserted into the ignition pushed for at least 1 second. ver to the P (Park) position. switch. ● when the seat has been already moved to 2. Turn the ignition ON. ● When the driver’s door is closed with the key the memorized position. turned to LOCK. 3. Push the memory switch (1 or 2) fully for at ● when no seat position is stored in the least 1 second. ● When the key is turned from ACC to ON memory switch. while the automatic transmission selector The driver’s seat, accelerator and brake The automatic drive positioner system can be lever is in the P (Park) position. pedals, and outside mirrors will move to the adjusted and canceled. For vehicles with naviga- memorized position with the indicator light The entry/exit function can be adjusted or can- tion system, see “Vehicle electronic systems” in blinking, and then the light will stay on for celed. For vehicles with navigation system, see the “Display screen, heater, air conditioner and approximately 5 seconds. “Vehicle electronic systems” in the “Display audio systems” section of this manual. For ve- screen, heater, air conditioner and audio sys- hicles without navigation system, see yourENTRY/EXIT FUNCTION tems” section of this manual. For vehicles without NISSAN dealer.This system is designed so that the driver’s seat navigation system, see your NISSAN dealer.will automatically move when the automatic SYSTEM OPERATIONtransmission selector lever is in the P (Park)position. This allows the driver to get into and out The automatic drive positioner system will notof the driver’s seat more easily. work or will stop operating under the following conditions:The driver’s seat will slide backward: ● when the vehicle speed is above 4 MPH (7 ● When the driver’s door is opened with the km/h). ignition key turned to LOCK. ● when any two or more of the memory ● When the ignition key is turned from ACC to switches are simultaneously pushed while LOCK with the driver’s door open while the the automatic drive positioner is operating. Pre-driving checks and adjustments 3-23 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 142. MEMO3-24 Pre-driving checks and adjustments
  • 143. 4 Display screen, heater, air conditionerand audio systemsControl panel buttons — with navigation system. . . . . . . 4-2 Audio operation precautions . . . . . . . . . . . . . . . . . . . . 4-20 Names of the components. . . . . . . . . . . . . . . . . . . . . . . 4-3 FM-AM radio with compact disc (CD) player How to use joystick and “ENTER” button . . . . . . . . . . 4-3 (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 How to use “PREV” button . . . . . . . . . . . . . . . . . . . . . . 4-3 FM-AM-SAT radio with compact disc (CD) Setting up the start-up screen . . . . . . . . . . . . . . . . . . . 4-3 changer (Type A, B, C and D) How to use the “TRIP” button . . . . . . . . . . . . . . . . . . . . 4-4 (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29 How to use the “SETTING” button. . . . . . . . . . . . . . . . 4-6 CD care and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35 button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 Steering wheel switch for audio controlVentilators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36Heater and air conditioner (manual). . . . . . . . . . . . . . . . . 4-12 Rear audio controls (if so equipped) . . . . . . . . . . . . . 4-37 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38 Heater operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13 NISSAN mobile entertainment system (MES) Air conditioner operation . . . . . . . . . . . . . . . . . . . . . . . 4-15 (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38 Air flow charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Digital video disc (DVD) player controls . . . . . . . . . . 4-39Servicing air conditioner. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19 Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40Audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19 Flip-down screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40 Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19 Playing a digital video disc (DVD) . . . . . . . . . . . . . . . 4-42 FM radio reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19 Care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 4-45 AM radio reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20 How to handle the DVD . . . . . . . . . . . . . . . . . . . . . . . . 4-45 Satellite radio reception (if so equipped) . . . . . . . . . 4-20 Car phone or CB radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-47 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 144. CONTROL PANEL BUTTONS — WITH NAVIGATION SYSTEM WARNING● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation.● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock.● Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock.● In case you notice any foreign object in the system hardware, spill liquid on it, or notice smoke or smell coming from it, stop using the system immediately and contact your nearest NISSAN dealer. Ignoring such conditions may lead to accidents, fire or electrical shock. LHA0388 When you use this system, make sure the engine Reference symbols: is running. “ENTER” button — This is a button on the con- If you use the system with the engine not trol panel. running (ignition ON or ACC) for a long time, it will use up all the battery power, and the engine will not start.4-2 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 145. “Display” key — This is a select key on the HOW TO USE JOYSTICK AND If you do not touch the button or screen key forscreen. By selecting this key you can proceed to “ENTER” BUTTON more than 1 minute on the TRIP, SETTING orthe next function. START-UP screen, the screen will change to Choose an item on the display using the joystick TRIP screen automatically.NAMES OF THE COMPONENTS and push the “ENTER” button for operation. To proceed to the next step, refer to the separate 1. brightness control button (P. 4-11) Navigation System Owner’s Manual. HOW TO USE “PREV” BUTTON 2. PREV (previous) button (P. 4-3) This button has two functions. 3. Joystick and ENTER push button (P. 4-3) ● Go back to the previous display (cancel). 4. SETTING button (P. 4-6) If you touch “PREV” button during setup, the 5. TRIP drive computer button (P. 4-4) setup will be canceled and/or the display will return to the previous screen. 6. DEST button* ● Finish setup. 7. ROUTE button* If you touch this button after the setup is com- 8. MAP button* pleted, the setup will start over, and the display 9. GUIDE VOICE button* will return to the climate control or audio mode and Navigation screen.10. zoom out button*11. zoom in button* SETTING UP THE START-UP SCREEN*For Navigation system control buttons, refer tothe separate Navigation System Owner’s When you turn the ignition key to ACC or ON, theManual. SYSTEM START-UP warning is displayed on the screen. Read the warning and select the “I AGREE” (English) or “ENTER” (Français) key then push the “ENTER” button. If you do not push the “ENTER” button, the Navigation system will not proceed to the next step display. Display screen, heater, air conditioner and audio systems 4-3 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 146. LHA0398 LHA0399 LHA0402HOW TO USE THE “TRIP” BUTTON Trip 1, trip 2 and fuel economy items Maintenance itemsWhen the “TRIP” button is pushed, the following To reset the TRIP 1, TRIP 2 and FUEL You can set the engine oil and the tire rotationmodes will display on the screen. ECONOMY, select the “RESET” key using the interval. joystick and push the “ENTER” button or pushWarning message (if there are any) → TRIP 1 To display the setting of the maintenance interval, the “TRIP” button for more than approximately(Elapsed Time, Driving Distance, Average select the “Engine Oil” or “Tire Rotation” key 1.5 seconds.Speed) → TRIP 2 → FUEL ECONOMY (Average using the joystick and push the “ENTER” button.Fuel Economy, Distance to Empty) → MAINTE-NANCE (Engine Oil, Tire Rotation) → OFF.4-4 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 147. LHA0400 LHA0401 LHA0403To set the maintenance interval, select the Tire pressure information“Maintenance Schedule” key by using the joy-stick and push the joystick to right or left. Pressure indication in ** psi on the screen indi- cates that the pressure is being measured. AfterTo reset the maintenance interval, select the “Re- a few driving trips, the pressure for each tire willset” key using the joystick and push the “EN- be displayed randomly.TER” button. The order of tire pressure figures displayed onTo display the MAINTENANCE INFORMATION the screen does not correspond with the actualautomatically when set trip distance is reached, order of the tire position.select the “Display Maintenance Notifica-tion” key and push the “ENTER” button. Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the outside temperature. Display screen, heater, air conditioner and audio systems 4-5 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 148. In case of low tire pressure, a message is dis- and push the “ENTER” button. You can then useplayed on the screen: the joystick to adjust the brightness to Darker or Brighter and the contrast to Lower or Higher. ForFLAT TIRE — very low tire air pressure. information on Map Background, please refer to the separate Navigation System Owner’s WARNING Manual.When a spare tire is mounted or a wheel is Display Off:replaced, tire pressure will not be indi-cated and the low tire pressure warning To turn off the screen, push the “SETTING”system will not function. Contact your button and select the “Display” key and “Dis-NISSAN dealer as soon as possible for tire play Off” key. The indicator of the “Displayreplacement and/or system resetting. Off” will turn to amber. When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off LHA0268 automatically 5 seconds after the operation is finished on the map display in the Audio, HVAC HOW TO USE THE “SETTING” (Heater and air conditioner), SETTING or VE- BUTTON HICLE INFO modes. The SETTING screen will appear when the To turn on the screen, push the “SETTING” “SETTING” button is pushed. button and select the “Display” key and “Dis- play Off” key, then set the screen to on by Display settings pushing the “ENTER” button. The DISPLAY SETTINGS screen will appear af- Setting Audio or HVAC display: ter pushing the “SETTING” button, selecting Choose the “Audio” or “HVAC” (Heater and air “Display” key and pushing the “ENTER” but- conditioner) key to be displayed at the bottom, by ton. using the joystick. The audio or HVAC setting Brightness/Contrast/Map Background: condition will normally appear on the screen. To return to the setting screen, push the “SET- To adjust the brightness and contrast of the TING” button or “PREV” button. screen, select the “Brightness/contrast” key4-6 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 149. LHA0382 LHA0381 LHA0261Vehicle electronic systems Indicator light is not illuminated — OFFThe VEHICLE ELECTRONIC SYSTEMS screenwill appear when selecting the “Vehicle Elec-tronic Systems” key with the joystick and push-ing the “ENTER” button.To set the various electronic systems operatingconditions, select the applicable item using thejoystick, and push the “ENTER” button. Theindicator light, box at left of selected item, alter-nately turns on and off each time the “ENTER”button is pressed.Indicator light is illuminated — ON Display screen, heater, air conditioner and audio systems 4-7 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 150. Adjust driver seat when exiting vehicle: NOTE: Speed dependent wiper:With this option ON, the driver’s seat automati- If you change the horn beep or the lamp This key allows you to turn on or turn off thecally moves back and returns to the original po- flash feature with the keyfob, the mode will driving speed dependent intermittent wiper func-sition for ease of exit and entry. not be changed with the display. Use the tion. keyfob to return to the previous mode and Return all settings to default:Remote unlock driver’s door first: re-enable the display control.This option allows you to select which doors will When this key is selected and turned on using Auto re-lock time: the “ENTER” button, all settings made by VE-unlock first during an unlocking operation: This key allows you to set the length of time HICLE ELECTRONICS will return to the defaultOnly the driver’s door ←→ All the doors settings. before doors auto re-lock.Keyless remote response — horn: Sensitivity of automatic headlights:This key allows you to change the horn chirp This key allows you to set the sensitivity of themode that occurs when pressing the LOCK or automatic headlights:UNLOCK button on the keyfob. ● Lower- less sensitive, automatic headlightsNOTE: will take longer to come on when the head-If you change the horn beep or the lamp light sensor senses less ambient light.flash feature with the keyfob, the mode will ● Higher- more sensitive, automatic head-not be changed with the display. Use the lights will come on quicker when the head-keyfob to return to the previous mode and light sensor senses less ambient light.re-enable the display control. Automatic headlights off delay:Keyless remote response — lights: This key allows you to set the length of timeThis key allows you to change the hazard indica- before the automatic headlights turn off aftertor flash mode that occurs when pressing the exiting the vehicle.LOCK or UNLOCK button on the keyfob.4-8 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 151. LHA0262 LHA0270 LHA0271System settings Clock Setting daylight savings time:Language/Unit Adjusting the time: Use the “Daylight Saving Time” key to adjust the clock to daylight savings time.The LANGUAGE/UNIT screen will appear when Select the “Hours” or “Minutes” key and moveselecting the “Language/Unit” key and push- the joystick to the right or left to adjust the time. ON: The displayed time advances by 1 hour.ing the “ENTER” button. The time will change step by step. OFF: The current time is displayed.Language: English or French After completion of the setting, press theUnit: US — mile, °F, MPG “PREV” button. Metric — km, °C, L/100 kmYou can select the language and unit using thejoystick and “ENTER” button. Display screen, heater, air conditioner and audio systems 4-9 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 152. LHA0272 LHA0273 LHA0274Adjusting the time to the GPS: Selecting the time zone: 2. Select one of the following zones dependingSelect the “Auto Adjust” key. 1. Select the “Select Time Zone” key. on the current location.The time will be reset to the GPS time. The [TIME ZONE] screen will appear. ● Pacific zone ● Mountain zone ● Central zone ● Eastern zone ● Atlantic zone ● Newfoundland zone After selection, the [CLOCK SETTINGS] screen will appear.4-10 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 153. VENTILATORSThe GPS time (manual time) corresponding tothe selected zone will be displayed. Pacific zonehas been set as the initial (default) setting.Beep settingWith this option ON, a beep will sound if anyaudio button is pushed. BUTTONTo change the display brightness, pushthe button. Pushing the button again willchange the display to DAY or NIGHT display.Then, adjust the brightness moving the joystickright or left. LHA0410If no operation is done within 10 seconds, or if the“PREV” button is pushed, the display will return Adjust air flow direction for the driver and pas-to the previous display. senger side ᭺, center ᭺, and rear passenger (if 1 2 so equipped) ᭺ ventilators by moving the venti- 3 lator slide and/or ventilator assemblies. Display screen, heater, air conditioner and audio systems 4-11 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 154. HEATER AND AIR CONDITIONER(manual) WARNING● The air conditioner cooling function op- erates only when the engine is running.● Do not leave children, impaired adults, or pets alone in your vehicle. They could accidentally injure themselves or oth- ers through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.● Do not use the recirculation mode for LHA0416 long periods as it may cause the interior air to become stale and the windows to 1. Fan speed control dial Air flow control dial fog up. 2. Air recirculation button The air flow control dial allows you to select the 3. Temperature control dial● Positioning of the heater and/or air air flow outlets. conditioner controls should not be 4. Air conditioner button 5. Air flow control dial MAX — Air flows from center and side done while driving so full attention may 6. Heated mirror switch (if so equipped) A/C vents with maximum cooling (air be given to vehicle operation. conditioning). CONTROLS — Air flows from center and side Fan control dial ventilators. — Air flows from center and side The fan control dial turns the fan on and off, and ventilators and the front and rear controls fan speed. floor outlets. — Air flows mainly from the front and rear floor outlets.4-12 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 155. — Air flows from defroster outlets OFF position: HEATER OPERATION and the front and rear floor Push the air recirculation button again to Heating outlets. turn air recirculation off. The indicator light on the button will turn off. ( will appear This mode is used to direct heated air to the foot — Air flows mainly from defroster on the display, if so equipped.) Outside air is outlets. Some air also flows from the defrost outlets. drawn into the passenger compartment and dis- outlets.The air flow control dial also has intermediate tributed through the selected outlet.positions which allow the air flow to be distrib- 1. Push the button to the OFF positionuted between 2 of the icon positions on the air Use the off position for normal heater or air con- for normal heating. The indicator light onflow control dial. ditioner operation. the button will go off. ( will ap- Air conditioner button pear on the display, if so equipped.)Temperature control dial 2. Turn the air flow control dial to theThe temperature control dial allows you to adjust Start the engine, turn the fan control dial to the position.the temperature of the outlet air. desired (1 to 4) position and push the button to turn on the air conditioner. The indicator 3. Turn the fan control dial to the desired posi- Air recirculation button tion. light on the button will come on. (A/C will appear on the display, if so equipped.) Push 4. Turn the temperature control dial to the de-ON position: the button again to turn off the air condi-Push the air recirculation button to recir- sired position between the middle and the tioner. The indicator light on the button will hot position.culate air inside the vehicle. The indicator light on go off. (A/C OFF will appear on the display, if sothe button will come on. ( will appearon the display, if so equipped.) equipped.) Ventilation The air conditioner cooling function oper- This mode directs outside air to the side andPush the button to the on position: ates only when the engine is running. center ventilators. ● when driving on a dusty road. Heated mirror switch (if so equipped) 1. Push the button to the OFF position. ● to prevent traffic fumes from entering pas- The indicator light on the button will senger compartment. For more information about the heated mirror switch, see “Heated mirror switch” in the “Instru- go off. ( will appear on the display, if so ● for maximum cooling when using the air con- ments and controls” section of this manual. equipped.) ditioner. 2. Turn the air flow control dial to the position. Display screen, heater, air conditioner and audio systems 4-13 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 156. 3. Turn the fan control dial to the desired posi- the vehicle is shut off, even if the air flow 1. Turn the air flow control dial to the tion. control dial is turned to a position other than position. 4. Turn the temperature control dial to the de- the position. This dehumidifies the air 2. Turn the fan control dial to the desired posi- sired position. which helps defog the windshield. tion. The mode automatically turns off, al-Defrosting or defogging lowing outside air to be drawn into the pas- 3. Turn the temperature control dial to the de- senger compartment to further improve the sired position between the middle and theThis mode directs the air to the defrost outlets todefrost/defog the windows. defogging performance. hot position. 1. Turn the air flow control dial to the Bi-level heating ● When the position is selected, the air position. conditioner automatically turns on (however, The bi-level mode directs warmed air to the side the indicator light on the button will 2. Turn the fan control dial to the desired posi- and center vents and to the front and rear floor not come on and A/C will not appear on the tion. outlets. display, if so equipped) if the outside tem- 3. Turn the temperature control dial to the de- 1. Push the button to the OFF position. perature is more than 36°F (2°C). If in de- sired position between the middle and the The indicator light on the button will frost mode for more than one minute, the air hot position. go off. ( will appear on the display, if so conditioning system will continue to operate equipped.) until the fan control dial is turned to OFF or ● To quickly remove ice or fog from the win- the vehicle is shut off, even if the air flow dows, turn the fan control dial to 4 and the 2. Turn the air flow control dial to the control dial is turned to a position other than temperature control lever to the full HOT position. the position. This dehumidifies the air position. which helps defog the windshield. 3. Turn the fan control dial to the desired posi- The mode automatically turns off, al- ● When the position is selected, the air tion. conditioner automatically turns on (however, lowing outside air to be drawn into the pas- the indicator light on the button will 4. Turn the temperature control dial to the de- senger compartment to further improve the not come on and A/C will not appear on the sired position. defogging performance. display, if so equipped) if the outside tem- Operating tips perature is more than 36°F (2°C). If in de- Heating and defogging frost mode for more than one minute, the air This mode heats the interior and defogs the wind- Clear snow and ice from the wiper blades conditioning system will continue to operate and air inlet in front of the windshield. This shield. until the fan control dial is turned to OFF or improves heater operation.4-14 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/12/03—skoniecz ੭
  • 157. AIR CONDITIONER OPERATION sure to return the to the OFF position 5. Turn the temperature control dial to the de- for normal cooling The indicator light on sired position.Start the engine, turn the fan control dial to the the button will go off. ( will ap-desired (1 to 4) position, and push in the pear on the display, if so equipped.) You may Operating tipsbutton to activate the air conditioner. When the also select MAX A/C for quick cooling. ● Keep the windows and sunroof (if soair conditioner is on, cooling and dehumidifying equipped) closed while the air conditioner isfunctions are added to the heater operation. Dehumidified heating in operation.The air conditioner cooling function oper- This mode is used to heat and dehumidify the air. ● After parking in the sun, drive for 2 or 3ates only when the engine is running. minutes with the windows open to vent hot 1. Push the button to the OFF position. air from the passenger compartment. Then,Cooling The indicator light on the button will close the windows. This allows the air con- go off. ( will appear on the display, if soThis mode is used to cool and dehumidify the air. ditioner to cool the interior more quickly. equipped.) 1. Push the button to the OFF position. ● The air conditioning system should be 2. Turn the air flow control dial to the operated for approximately 10 minutes 2. Turn the air flow control dial to the position. at least once a month. This helps pre- position. 3. Turn the fan control dial to the desired posi- vent damage to the system due to lack tion. of lubrication. 3. Turn the fan control dial to the desired posi- tion. 4. Push the button on. The indicator ● If the engine coolant temperature light on the button will come on. (A/C gauge indicates engine coolant tem- 4. Push the button. The indicator light will appear on the display, if so equipped.) perature over the normal range, turn on the button will come on. (A/C will the air conditioner off. See “If your appear on the display, if so equipped.) The air conditioning system will continue to vehicle overheats” in the “In case of operate until the fan control dial is turned to 5. Turn the temperature control dial to the de- emergency” section of this manual. OFF or the vehicle is shut off, even if the air sired position. flow control dial is turned to a position other ● For quick cooling when the outside tem- than the position. perature is high, push the button to the ON position. The indicator light on the button will come on. ( will appear on the display, if so equipped.) Be Display screen, heater, air conditioner and audio systems 4-15 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 158. AIR FLOW CHARTSThe following charts show the button and dialpositions for MAXIMUM AND QUICK heating,cooling or defrosting. For additional informationon heating and cooling see “Heating” on page4-13 and “Cooling” on page 4-15. The air re-circulation ( ) button should alwaysbe in the OFF position for heating anddefrosting. LHA04114-16 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 159. LHA0412 LHA0413 Display screen, heater, air conditioner and audio systems 4-17 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 160. LHA0414 LHA04154-18 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 161. SERVICING AIR CONDITIONER AUDIO SYSTEMThe air conditioner system in your NISSAN ve- RADIO Reception conditions will constantly change be-hicle is charged with a refrigerant designed with cause of vehicle movement. Buildings, terrain,the environment in mind. Turn the ignition key to the ACC or ON position signal distance and interference from other ve- and press the PWR (power)/VOL (volume) knob hicles can work against ideal reception. De-This refrigerant does not harm the earth’s to turn the radio on. If you listen to the radio withozone layer. scribed below are some of the factors that can the engine not running, the key should be turned affect your radio reception.Special charging equipment and lubricant is re- to the ACC position.quired when servicing your NISSAN air condi- FM RADIO RECEPTION Radio reception is affected by station signaltioner. Using improper refrigerants or lubricantswill cause severe damage to your air conditioner strength, distance from radio transmitter, build- Range: FM range is normally limited to 25 - 30system. See “Air conditioner system refrigerant ings, bridges, mountains and other external influ- miles (40 - 48 km), with monaural (single chan-and lubricant recommendations” in the “Techni- ences. Intermittent changes in reception quality nel) FM having slightly more range than stereocal and consumer information” section of this normally are caused by these external influences. FM. External influences may sometimes interferemanual. with FM station reception even if the FM station is Using a cellular phone in or near the ve- within 25 miles (40 km). The strength of the FMA NISSAN dealer is able to service your “environ- hicle may influence radio reception quality. signal is directly related to the distance betweenmentally friendly” air conditioning system. Radio reception the transmitter and receiver. FM signals follow a line-of-sight path, exhibiting many of the same WARNING Your NISSAN radio system is equipped with characteristics as light. For example they willThe air conditioner system contains re- state-of-the-art electronic circuits to enhance ra- reflect off objects.frigerant under high pressure. To avoid dio reception. These circuits are designed topersonal injury, any air conditioner ser- extend reception range, and to enhance the qual- Fade and drift: As your vehicle moves away fromvice should be done only by an experi- ity of that reception. a station transmitter, the signals will tend to fadeenced technician with proper equipment. and/or drift. However there are some general characteristics of both FM and AM radio signals that can affect Static and flutter: During signal interference from radio reception quality in a moving vehicle, even buildings, large hills or due to antenna position when the finest equipment is used. These char- (usually in conjunction with increased distance acteristics are completely normal in a given re- from the station transmitter) static or flutter can ception area, and do not indicate any malfunction be heard. This can be reduced by adjusting the in your NISSAN radio system. treble control to reduce treble response. Display screen, heater, air conditioner and audio systems 4-19 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 162. Multipath reception: Because of the reflective the vehicle outside of any metal or large buildingcharacteristics of FM signals, direct and reflected for satellite radio to receive all of the necessarysignals reach the receiver at the same time. The data.signals may cancel each other, resulting in mo- No satellite radio reception is available and “NOmentary flutter or loss of sound. SAT” is displayed when the SAT band option isAM RADIO RECEPTION selected unless optional satellite receiver and antenna are installed (retrofit unavailable withoutAM signals, because of their low frequency, can factory satellite radio pre-wiring), and an XMா orbend around objects and skip along the ground. SIRIUS™ satellite radio service subscription isIn addition, the signals can be bounced off the active.ionosphere and bent back to earth. Because of Satellite radio performance may be affected ifthese characteristics, AM signals are also sub- cargo carried on the roof blocks the satellite radioject to interference as they travel from transmitter signal.to receiver. If possible, do not put cargo over the satelliteFading: Occurs while the vehicle is passing antenna.through freeway underpasses or in areas withmany tall buildings. It can also occur for severalseconds during ionospheric turbulence even inareas where no obstacles exist.Static: Caused by thunderstorms, electricalpower lines, electric signs and even traffic lights. LHA0099SATELLITE RADIO RECEPTION (if so AUDIO OPERATION PRECAUTIONSequipped)When the satellite radio is first installed or the Compact disc (CD) playerbattery has been replaced, the satellite radio may ● Only use high quality 4.7 inches (12 cm)not work properly. This is not a malfunction. Wait round discs that have the “COMPACTmore than 10 minutes with satellite radio ON and4-20 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 163. disc DIGITAL AUDIO” logo on the disc ● 3.1 in (8 cm) discs with an adapter or packaging. ● CDs that are not round● During cold weather or rainy days, the ● CDs with a paper label player may malfunction due to the hu- midity. If this occurs, remove the CD ● CDs that are warped, scratched, or and dehumidify or ventilate the player have abnormal edges completely.● The player may skip while driving on rough roads.● The CD player sometimes cannot func- tion when the compartment tempera- ture is extremely high. Decrease the temperature before use.● Do not expose the CD to direct sun- light.● CDs that are in poor condition or are dirty, scratched or covered with finger- prints may not work properly.● The following CDs may not work prop- erly: ● Copy control compact discs (CCCD) ● Recordable compact discs (CD-R) ● Rewritable compact discs (CD-RW)● Do not use the following CDs as they may cause the CD player to malfunc- tion: Display screen, heater, air conditioner and audio systems 4-21 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 164. 1. PRESET ABC button 2. Display 3. CD button 4. CD eject button 5. CD insert slot 6. MENU button 7. AUDIO button 8. Station select buttons 9. SEEK/TRACK button 10. PWR/VOL control knob 11. BAND select button FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (if so equipped) PWR/VOL control knob Turn the ignition key to the ACC or ON position, then push the PWR/VOL control knob. If you listen to the radio with the engine not running, turn the key to the ACC position. The mode (radio or CD) that was playing immediately before the system was turned off resumes playing. When no CD is loaded, the radio comes on. Pushing the PWR/VOL control knob again turns the system off. Turn the PWR/VOL control knob to the right to increase volume or to the left to decrease volume. LHA01174-22 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 165. times for BAL (balance). Once the audio level is FM-AM radio operation set the display will return back to radio or CD display mode after 7 seconds or the AUDIO FM-AM band select button can be pressed again within 7 seconds to set the next audio level. Pressing the AUDIO Push the button to change from AM to FM button a fifth time will return the display back to reception. radio or CD display mode. The FM stereo indicator, ST, illuminates during Fader adjusts the sound level between the front FM stereo reception. When the stereo broadcast and rear speakers, balance adjusts the sound signal is weak, the radio automatically changes level between the right and left speakers. from stereo to monaural reception. SEEK/manual/SCAN Clock set tuning 1. Press and hold the MENU button until it When the button is pushed while the radio beeps (longer than 2 seconds). is playing, tuning mode is cycled between: 2. The hours will start flashing. Press SEEK tuning → manual tuning → SCAN mode SEEK/TRACK ( or ) to adjust the hours. “TUNE” and “SCAN” are shown in the display for each mode. No icon is displayed for SEEK mode. 3. Press the MENU button until the radio beeps to switch to the minute adjustment. WARNING 4. The minutes will start flashing. Press The radio should not be tuned while driv- LHA0118 SEEK/TRACK ( or ) to adjust the min- ing so full attention may be given to ve-Adjusting tone quality and speaker balance utes. hicle operation.To adjust the audio levels for bass, treble, fader, 5. Press the MENU button again to exit the SEEK tuningand balance, push the AUDIO button and adjust clock set mode. Push the SEEK/TRACK tuning button (the level with the SEEK/TRACK button. Press the The display will return to the regular clock display or ) for less than 1.5 seconds. SEEK tuningAUDIO button once for BASS (bass), twice for after 7 seconds, or you may press the MENU begins from low to high frequencies or high toTREB (treble), 3 times for FAD (fader) and 4 button again to return to the regular clock display. low frequencies, depending on which button is Display screen, heater, air conditioner and audio systems 4-23 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 166. pressed, and stops at the next broadcasting sta- Press the PRESET ABC button to change be-tion. If using the button, once the highest tween the presets:broadcasting station is reached, the radio contin-ues in the SEEK mode at the lowest broadcasting A→B→Cstation. If using the button, once the lowest The radio displays icon A, B or C to indicatebroadcasting station is reached, the radio contin- which set of presets is active.ues in the SEEK mode at the highest broadcast-ing station. To store a radio station in a preset:Manual tuning 1. Select the desired preset by pressing PRE- SET ABC.Use the and buttons for manualtuning. To move quickly through the channels, 2. Tune to the desired station.hold either of the tuning buttons down. 3. Press the desired station select button forSCAN tuning more than 3 seconds. For example, in the illustrations, ch2 is to be memorized. ThePush and hold the SEEK/TRACK tuning button radio mutes when the select button is( or ) for more than 1.5 seconds. pushed.SCAN illuminates in the display window, and the 4. When the indicator illuminates in the displayradio station blinks. SCAN tuning begins from and the sound resumes, memorizing is com-low to high frequencies or high to low frequen- plete.cies, depending on which button is pressed.SCAN tuning stops at each broadcasting station 5. Other station select buttons can be set infor 5 seconds. When scanning, SCAN is solid the same manner. LHA0119and the radio station blinks. When temporarily Station memory operations If the battery cable is disconnected, or if the radiostopped on a station, SCAN blinks and the sta- fuse opens, the radio memory is canceled. In thattion display is solid. Pushing the button again Each preset mode (A, B or C) has 6 presets, case, reset the desired stations.during this 5 second period stops SCAN tuning capable of storing any combination of AM and FMand the radio remains tuned to that station. Compact disc (CD) player operation stations. Turn the ignition key to the ACC or ON position, and carefully insert the compact disc into the slot4-24 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 167. with the label side up. The compact disc is auto- When the button is pushed and released, the Blank (no symbol): All selections are playedmatically pulled into the slot and starts to play. selection being played returns to the beginning. repeatedly in sequence. Push the button several times to skip back When a new compact disc is inserted, theIf the radio is already operating, it automatically several selections. Each time the button is play pattern automatically changes to ALL.turns off and the compact disc begins to play. pushed, the CD moves back 1 selection. CD EJECT button CAUTION If the play pattern is in MIX mode when theDo not force a compact disc into the CD or button is pushed the next selection will be When the button is pushed with a com-insert slot. This could damage the CD chosen at random. pact disc loaded, the compact disc ejects.and/or CD changer/player. FF (Fast Forward)/REV (Reverse) When the button is pushed while the com- CD button When the or button is pushed and held pact disc is playing, the compact disc ejects and while the compact disc is playing, the compact the system turns off.When the CD button is pushed with a compact disc plays at an increased speed while fast for- DISC indicator lightdisc loaded and the radio playing, the radio turns warding or rewinding. When the button is re-off and the compact disc starts to play. leased, the compact disc returns to normal play This light comes on when a compact disc speed. is loaded into the player. Track up/down, FF/REV (rewind) buttons MENUTrack up/down When the button is pushed while the com-When the button is pushed and released pact disc is playing, the play pattern changes aswhile the compact disc is playing, the selection follows:following the present one starts to play from the RPT: The current selection is repeated.beginning. Push the button several times toskip several selections. Each time the button is MIX: Selections are played at random, not fol-pushed, the CD advances 1 additional selection. lowing the sequence on the compact disc. TheThe number appears in the display window. same program may be repeated twice. If the(When the last selection on the compact disc is button is pushed in the MIX mode, selections willskipped, the first selection is played.) be chosen at random. Display screen, heater, air conditioner and audio systems 4-25 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 168. 11. LOAD button 12. CD insert slot 13. CD eject button 14. POWER/VOLUME control knob 15. Station and CD select buttons (1 - 6) 16. Tuning and AUDIO control knob (BASS, MID, TREBLE, FADE and BAL- ANCE) *No satellite radio reception is available and “NO SAT” is displayed when the SAT button is pressed unless optional satellite receiver and antenna are in- stalled (retrofit unavailable without fac- tory satellite radio pre-wiring), and an XMா or SIRIUS™ satellite radio service subscription is active. LHA0406 Type A1. SEEK/TRACK change button 6. CD play button2. TUNE/REW/FF button 7. FM band select button3. PAUSE/MUTE button 8. AM band select button4. PROG/RPT button 9. SAT (satellite) radio select button*5. PRESET A-B-C select button 10. AUX button4-26 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 169. 11. LOAD button 12. CD insert slot 13. CD eject button 14. POWER/VOLUME control knob 15. Station and CD select buttons (1 - 6) 16. Tuning and AUDIO control knob (BASS, MID, TREBLE, FADE and BAL- ANCE) *No satellite radio reception is available and “NO SAT” is displayed when the RADIO button is pressed to access satellite radio stations unless optional satellite receiver and antenna are in- stalled (retrofit unavailable without fac- tory satellite radio pre-wiring), and an XMா or SIRIUS™ satellite radio service subscription is active. LHA0384 Type B1. SEEK/TRACK change button 6. CD play button2. TUNE/REW/FF button 7. RADIO button*3. PAUSE/MUTE button 8. AUX button4. PROG/RPT button 9. REAR AV button5. PRESET A-B-C select button 10. speaker control button Display screen, heater, air conditioner and audio systems 4-27 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 170. 11. SAT (satellite) radio select button* 12. AUX button 13. LOAD button 14. CD insert slot 15. CD eject button 16. POWER/VOLUME control knob 17. Station and CD select buttons (1 - 6) 18. Tuning and AUDIO control knob (BASS, MID, TREBLE, FADE and BAL- ANCE) *No satellite radio reception is available and “NO SAT” is displayed when the SAT button is pressed unless optional satellite receiver and antenna are in- stalled (retrofit unavailable without fac- tory satellite radio pre-wiring), and an XMா or SIRIUS™ satellite radio service subscription is active. LHA0404 Type C1. SEEK/TRACK change button 6. H/M button (clock set buttons)2. TUNE/REW/FF button 7. PRESET A-B-C select button3. Display 8. CD play button4. PAUSE/MUTE button 9. FM band select button5. PROG/RPT button 10. AM band select button4-28 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 171. 11. speaker control button 12. REAR AV button 13. LOAD button 14. CD insert slot 15. CD eject button 16. POWER/VOLUME control knob 17. Station and CD select buttons (1 - 6) 18. Tuning and AUDIO control knob (BASS, MID, TREBLE, FADE and BAL- ANCE) *No satellite radio reception is available and “NO SAT” is displayed when the RADIO button is pressed to access satellite radio stations unless optional satellite receiver and antenna are in- stalled (retrofit unavailable without fac- tory satellite radio pre-wiring), and an XMா or SIRIUS™ satellite radio service subscription is active. LHA0385 FM-AM-SAT RADIO WITH Type D COMPACT DISC (CD) CHANGER1. SEEK/TRACK change button 6. H/M button (clock set buttons) (Type A, B, C and D) (if so equipped)2. TUNE/REW/FF button 7. PRESET A-B-C select button3. Display 8. CD play button No satellite radio reception is available and “NO4. PAUSE/MUTE button 9. RADIO button* SAT” is displayed when the SAT or RADIO button is pressed to select satellite radio stations unless5. PROG/RPT button 10. AUX button optional satellite receiver and antenna are in- Display screen, heater, air conditioner and audio systems 4-29 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 172. stalled (retrofit unavailable without factory satel- knob to adjust Bass and Treble to the desired Track number ←→ Track title ←→ Disc title ←→lite radio pre-wiring), and an XMா or SIRIUS™ level. You can also use the Tuning knob to adjust Track numbersatellite radio service subscription is active. Fader and Balance modes. Fader adjusts the Display satellite radio text (if so equipped): sound level between the front and rear speakersAudio main operation and Balance adjusts the sound between the right To change the text displayed while listening toPOWER/VOLUME control: and left speakers. satellite radio, press the AUDIO knob until “Dis- play Mode” appears.Turn the ignition key to ACC or ON, and then To change the SSV mode to OFF, LOW, MID orpush the POWER/VOLUME control knob while HIGH, turn the Tuning knob to the right or left. Turn the Tuning knob within 2 seconds. The textthe system is off to call up the mode (radio or CD) will change as follows:which was playing immediately before the system Once you have adjusted the sound quality to thewas turned off. desired level, press the AUDIO knob repeatedly Channel number ←→ Channel name ←→ Artist until the radio or CD display reappears. Other- ←→ Title ←→ Channel numberTo turn the system off, press the wise, the radio or CD display will automaticallyPOWER/VOLUME control knob. Pause/mute button: reappear after about 10 seconds.Turn the POWER/VOLUME control knob to ad- To mute or pause the audio sound, push the Clock set (type C and D only) PAUSE/MUTE button.just the volume. 1. Press and hold the H button to advance To release the mute or pause, push the buttonThis vehicle has speed sensitive control volume hours.(SSV) for audio. The audio volume changes as again.the driving speed changes. 2. Press and hold the M button to advance minutes. FM/AM/SAT radio operationAUDIO knob (BASS, MIDRANGE, TREBLE, FM/AM/SAT band select (type A and CFADE, BALANCE and SSV): For setting the clock on type A and B audio only): systems see “Adjusting the time” on page 4-9.Press the AUDIO knob to change the mode as Pushing the FM, AM or SAT radio select buttonfollows: Display CD text: will change the band to either FM, AM or SATBASS → MID → TREBLE → FADE → BALANCE To change the text displayed while playing a CD, (satellite-if so equipped) radio stations.→ SSV press the AUDIO knob until “Display Mode” ap- When the FM, AM or SAT radio select button is pears.To adjust Bass, Mid (Midrange), Treble, Fade and pushed while the ignition switch is in the ACC orBalance, press the AUDIO knob until the desired Turn the Tuning knob within 2 seconds. The text ON, the radio will come on at the station lastmode appears in the display. Turn the Tuning will change as follows: played.4-30 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 173. The last station played will also come on when The last station played will also come on when To move quickly through the channels, hold eitherthe Power/Volume control knob is depressed to the POWER/VOLUME control knob is de- the or button down for more thanON. pressed to ON. 1.5 seconds.No satellite radio reception is available and “NO No satellite radio reception is available and “NO SEEK tuning:SAT” is displayed when the SAT button is SAT” is displayed when the RADIO button ispressed unless optional satellite receiver and pressed to access satellite radio stations unless Push the SEEK/TRACK button ( or )antenna are installed (retrofit unavailable without optional satellite receiver and antenna are in- for less than 1.5 seconds to tune from high to lowfactory satellite radio pre-wiring), and an XMா or stalled (retrofit unavailable without factory satel- or low to high frequencies and stop at the nextSIRIUS™ satellite radio service subscription is lite radio pre-wiring), and an XMா or SIRIUS™ broadcasting station.active. satellite radio service subscription is active. SCAN tuning:If a compact disc is playing when the FM, AM or If a compact disc is playing when the RADIOSAT radio select button is pushed, the compact button is pushed, the compact disc will automati- Push the or button for more thandisc will automatically be turned off and the last cally be turned off and the last radio station 1.5 seconds to stop at each broadcasting stationradio station played will come on. played will come on. for 5 seconds. Pushing the button again during this 5 second period will stop SCAN tuning andThe FM stereo indicator ST will glow during FM The FM stereo indicator ST will glow during FM the radio will remain tuned to that station. Ifstereo reception. When the stereo broadcast stereo reception. When the stereo broadcast the or button is not pushed within 5signal is weak, the radio will automatically change signal is weak, the radio will automatically change seconds, SCAN tuning moves to the next station.from stereo to monaural reception. from stereo to monaural reception. Station memory operations:FM/AM/SAT band select (type B and D TUNE (Tuning):only): 18 stations can be set for the FM, AM and SAT WARNING (Satellite-if so equipped) radio to the A, B and CPushing the RADIO button will change the band preset button in any combination of AM or FMas follows: The radio should not be tuned while driv- stations. ing so full attention may be given to ve-AM ←→ FM or SAT (Satellite) hicle operation. 1. Choose preset channel A, B or C using theWhen the RADIO button is pushed while the preset select button. To manually tune the radio, push the TUNE buttonignition switch is in the ACC or ON position, the ( or ) or turn the tuning knob to rightradio will come on at the station last played. or left. Display screen, heater, air conditioner and audio systems 4-31 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 174. 2. Tune to the desired station using manual, If the station broadcasts RDS information, the SEEK or SCAN tuning. Push and hold any of RDS icon is displayed. the desired station memory buttons (1 - 6) Program type (PTY): until a beep sound is heard. PTY can be used to search for a certain program 3. The channel indicator will then come on and type. Certain areas have a limited number of the sound will resume. Memorizing is now stations that transmit RDS. Many stations trans- complete. mit call letters and frequencies only. 4. Other buttons can be set in the same man- Searching or scanning by program type may yield ner. a limited number of selections.If the battery cable is disconnected, or if the fuse When PROG/RPT button is pressed for moreblows, the radio memory will be canceled. In that than 1.5 seconds during FM or SAT (if socase, reset the desired stations. equipped) mode, the PTY name of the currentRadio data system (RDS): tuned station is displayed. During this time if the PTY data code is zero or the data is unreadable,RDS stands for Radio Data System, and is a data the display will show NONE.information service transmitted by some radiostations on the FM band (not AM band) and/or To change the PTY:SAT radio encoded within a regular radio broad- 1. Press the PROG/RPT button.cast. Currently, most RDS stations are in largecities, but many stations are now consideringbroadcasting RDS data.RDS can display: LHA0275 ● Station call sign, such as “WHFR 98.3”. 2. Press the TUNE button ( or ) to chose a specific program type. Refer to the ● Station name, such as “The Groove”. illustration. ● Music or programming type such as “Clas- The display will show “SEEK, SCAN?” sical”, “Country”, or “Rock”. ● Traffic reports about delays or construction.4-32 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 175. SEEK tuning: Turn the ignition key to the ACC or ON position When the CD button is pushed with the compact and insert the compact disc into the slot with the disc loaded with the radio playing, the radio will 3. After selecting a program type, push the automatically be turned off and the compact disc label side facing up. The compact disc will be SEEK button ( or ) for less than will start to play. guided automatically into the slot and start play- 1.5 seconds within 10 seconds. Tuning to ing. To insert the disc, first push the LOAD button. REW (Rewind), FF (Fast the PTY station will start. If you do not push the SEEK button within the 10 second pe- If the radio is already operating, it will automati- Forward): riod, the PTY mode will be canceled. cally turn off and the compact disc will play. When the (rewind) or (fast forward)SCAN tuning: If the system has been turned off while the com- button is pushed while a compact disc is playing, pact disc was playing, pushing the the compact disc will play while rewinding or fast 4. Push the or button for more forwarding . When the button is released, the POWER/VOLUME control knob will start the than 1.5 seconds to scan the PTY name compact disc will return to normal play speed. compact disc. stations and stop at each broadcasting sta- When the CD button is pushed with the system tion for 5 seconds. Pushing the button again LOAD button: off and the compact disc loaded, the system will during this 5 second period will stop SCAN turn on and the compact disc will start to play. To insert a CD in the CD changer, push the LOAD tuning and the radio will remain tuned to that button for less than 1.5 seconds. Select the When the CD button is pushed with the compact station. If the or button is not loading slot by pushing the CD insert select disc loaded with the tape or the radio playing, the pushed within 5 seconds, SCAN tuning button (1 - 6), then insert the CD. tape or radio will automatically be turned off and moves to the next station. To insert 6 CDs to the CD changer, push the the compact disc will start to play.Compact disc (CD) changer operation LOAD button for more than 1.5 seconds. SEEK/TRACK: CAUTION The slot numbers (1 - 6) will illuminate on the display when CDs are loaded into the changer. When the button is pushed for less than 1.5● Do not force a compact disc into the CD seconds while a compact disc is playing, the insert slot. This could damage the CD CD button: track being played returns to its beginning. Push and/or CD changer/player. several times to skip back through tracks. The When the CD button is pushed with the system compact disc will go back the number of times● Trying to load a CD with the CD door off and the compact disc loaded, the system will the button is pushed. closed could damage the CD and/or CD turn on and the compact disc will start to play. changer. Display screen, heater, air conditioner and audio systems 4-33 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 176. When the button is pushed for less than 1.5 ALL DISC RDM: Tracks from all discs will be CD EJECT:seconds while the compact disc is playing, the played randomly Current disc:next track will start to play from its beginning. 1 DISC RDM: Tracks from the disc that is cur-Push several times to skip through tracks. The rently playing will be played randomly ● Press the slot number (1 - 6) for the desiredcompact disc will advance the number of times disc, then press the button. The com- REAR AV (type B and D only): pact disc will be ejected. If the disc is notthe button is pushed. (When the last track on thecompact disc is skipped through, the first track Pushing the REAR AV button for less than 1.5 removed within 15 seconds, the disc willwill be played.) seconds turns the rear seat audio controller on. reload (except 3.1 in [8 cm] diameter com- REAR CONT ON will display. Pushing it again pact discs).When pushing the or button for more will turn the rear seat audio controller off. REAR All discs:than 1.5 seconds, each track will play for about CONT OFF will display. If the vehicle is not10 seconds. To stop playing, push ● Press and hold the button for more equipped with a rear seat audio controller, thethe button again. than 1.5 seconds. The compact discs will be display will show “REAR AV N/A”. ejected one by one. If a disc is not removedCD select buttons: within 15 seconds, or the button is If a DVD is loaded in the DVD entertainmentTo play another CD that has been loaded, push a system (if so equipped), pushing the REAR AV pressed again during the eject sequence,CD select button (1 - 6). button for more than 1.5 seconds will turn the the entire disc eject sequence will be can- DVD player on. celed.REPEAT (RPT): When the REAR AV button is pushed for more When this button is pushed while the compactWhen the PROG/RPT play button is pushed disc is being played, the compact disc will ejectwhile the compact disc is played, the play pattern than 1.5 seconds with a DVD loaded and another audio source playing, the other source will auto- and the last source will be played.can be changed as follows: matically be turned off and the DVD will start to CD IN indicator:ALL DISC RPT → 1 DISC RPT→ 1 TRACK RPT play.→ ALL DISC RDM → 1 DISC RDM → ALL DISC The slot numbers (1 - 6) will illuminate if CDsRPT (SPEAKER CONTROL) button have been loaded into the changer. (type B and D only):ALL DISC RPT: All discs loaded will be repeated.1 DISC RPT: The disc that is currently playing will Push this button to turn the rear speakers off andbe repeated. headphones on. Push this button again to turn1 TRACK RPT: The track that is currently playing rear seat speakers back on and headphones off.will be repeated4-34 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 177. ● A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. LHA0438 LHA0049AUX jack (if so equipped) CD CARE AND CLEANINGThe AUX jack ᭺ is located below the air condi- 1 ● Handle a CD by its edges. Do not bend thetioner controls. The AUX audio input jack accepts disc. Never touch the surface of the disc.any standard analog audio input such as from aportable cassette tape player, MP3 player or ● Always place the discs in the storage caselaptop computers. when they are not being used.Press the AUX button to play a compatible device ● To clean a disc, wipe the surface from thewhen it is plugged into the AUX jack. center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. ● Do not use a conventional record cleaner or alcohol intended for industrial use. Display screen, heater, air conditioner and audio systems 4-35 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 178. MODE select switch When playing a CD in the CD changer (if so equipped), push the tuning switch ( Push the mode select switch to change the mode or ) for more than 1.5 seconds to change in the following sequence: DVD (if so equipped), between discs when multiple CDs are loaded. AM, FM, SAT (if so equipped) and CD. Memory change (radio): Volume control switch Push the tuning switch or for less Push the volume control switch up or down to than 1.5 seconds to change to the next preset increase or decrease the volume. station in memory. Seek tuning (radio): Tuning Push the tuning switch or for more Memory change (radio): than 1.5 seconds to seek the next or previous Push the tuning switch ( or ) for less radio station. LHA0269 than 1.5 seconds to change the radio frequency. Next/Previous track (CD):1. Volume control switch Seek tuning (radio): Push the tuning switch or for less2. MODE select switch than 1.5 seconds to return to the beginning of the3. POWER on/off switch Push the tuning switch ( or ) for more than 1.5 seconds to seek the next or previ- present track or skip to the next track. Push4. Tuning switch several times to skip back or skip through tracks. ous radio station.STEERING WHEEL SWITCH FOR This system searches for the blank intervals be- FF, REW:AUDIO CONTROL (if so equipped) tween selections. If there is a blank interval within Push the tuning switch ( or ) for less 1 program or there is no interval between pro-The audio system can be operated using the grams, the system may not stop in the desired or 1.5 seconds to return to the beginning of thecontrols on the steering wheel. expected location. present program or skip to the next program.POWER on/off switch Push several times to skip back or skip through Change disc (CD) (if so equipped): programs.With the ignition key turned to the ACC or ON Push the tuning switch or for moreposition, push the POWER switch to turn the To stop the FF or REW function, press the than 1.5 seconds to change the playing disc upaudio system on or off. or button for less than 1.5 seconds again. or down.4-36 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 179. REAR AUDIO CONTROLS (if so equipped) Push the REAR AV button on the front radio control panel to turn the rear controls on. Push the button again to turn rear controls off. The headphones symbol illuminates on the front display when the rear audio controls are on. Two headphone jacks are provided so two rear seat passengers may listen to the audio system pri- vately. The rear volume controls can only increase the volume to the level at which the front radio volume control is set. One infrared headphone is included if the vehicle is equipped with the DVD entertainment system. Most portable radio headphones work with the rear audio controls. For vehicles equipped with the FM/AM/SAT radio with compact disc player, if the rear passengers LHA0322 turn off the rear speakers and are using head-1. VOL (volume) control button 7. Infrared headphone transmitter lens* phones they may choose to listen to a different media than the front passengers. The rear pas-2. MODE select button sengers can listen to the radio while the front3. speaker control button *Red transmitters will be visible when passengers can listen to the same thing, a CD or4. NEXT button infrared headphones are on. SAT radio.5. SEEK button6. Headphone jacks Display screen, heater, air conditioner and audio systems 4-37 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 180. NISSAN MOBILE ENTERTAINMENT SYSTEM (MES) (if so equipped)VOL (volume) button: The NEXT button does not function while in SAT radio mode or when playing a DVD or CD.The VOL button allows the rear passengers toadjust the headphone volume level. ANTENNA (SPEAKER CONTROL) button: The antenna cannot be shortened, but can be removed. When you need to remove the antenna,Push this button to turn the rear speakers off and turn the antenna rod counterclockwise.headphones on. Push this button again to turn To install the antenna rod, turn the antenna clock-rear seat speakers back on and headphones off. wise. Tighten the antenna rod to specification using a suitable tool such as an open-endMODE button: wrench. The antenna rod tightening specificationThe MODE button allows the rear passengers to is 3.4 - 3.6 N·m (30 - 32 in-lb). Do not use plierschange between AM, FM, CD, DVD and AUX. to tighten the antenna as they can leave marks onThe media options are listed on the face plate of the antenna surface. The antenna rod cannot be LHA0389 hand tightened to the proper specification.the rear audio controls. When a source of mediais selected, the media label will be illuminated. WARNING CAUTION ● The Mobile Entertainment System isSEEK button: Always properly tighten the antenna rod designed for rear seat passenger view-In AM or FM mode the SEEK button allows the during installation or the antenna rod may ing only.rear seat passengers to find the next radio station break during vehicle operation. ● The driver must not attempt to operateup or down the station band frequency. the Mobile Entertainment System whileIn CD mode the SEEK button allows the rear the vehicle is in motion so that full at-passengers to find the next or previous selection tention may be given to vehicleon the CD. operation.NEXT button:When the NEXT button is pushed while in AM orFM mode, the radio will change to the next preset.4-38 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 181. CAUTION● The glass screen on the liquid crystal display may break if hit with a hard or sharp object. If the glass breaks, do not touch the liquid crystalline material, which contains a small amount of mer- cury. In case of contact with skin, wash immediately with soap and water.● Use a damp, soft cloth when cleaning the Mobile Entertainment System com- ponents. Do not use solvents or clean- ing solutions.● Do not attempt to use the system in LHA0316 extreme temperature conditions [below -4°F (-20°C) or above 158°F (70°C)]. 1. EJECT button DIGITAL VIDEO DISC (DVD) PLAYER 2. DVD slot CONTROLS● To avoid draining the vehicle battery, do 3. ENTER button not operate the system more than 15 minutes without starting the engine. 4. POWER on/off button 5. MODE button 6. Input jacks 7. STOP button 8. PLAY/PAUSE button 9. MENU button 10. DISPLAY button 11. NAVIGATION keys Display screen, heater, air conditioner and audio systems 4-39 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 182. 6. DISPLAY button 7. MODE button 8. SUBTITLE button 9. AUDIO button 10. ANGLE button 11. CLEAR button 12. PAUSE button 13. PLAY button 14. FAST FORWARD/FAST REVERSE button 15. MENU button 16. NAVIGATION keys 17. BACK button LHA0315 18. NUMERIC KEYPAD REMOTE CONTROL FLIP-DOWN SCREEN The flip-down screen has a wireless remote con- trol receiver ᭺ located at the bottom of the 1 screen. CAUTION LHA0317 ● The glass screen on the liquid crystal display may break if hit with a hard or1. POWER button sharp object. If the glass breaks, do not2. STOP button touch the liquid crystalline material,3. NEXT TRACK/CHAPTER and PREVI- which contains a small amount of mer- OUS TRACK/CHAPTER button cury. In case of contact with skin, wash4. TITLE button immediately with soap and water.5. ENTER button4-40 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 183. ● The screen rotates down to view and up into the housing to store when not in use. Ensure that the screen is latched securely into the housing when stored. SAA0720 SAA0721 Headphones NOTE: Power ON/OFF: For optimum infrared headphone perfor- mance, increase the volume on the rear Push the power button to turn the headphones seat controller to the maximum level and on or off. adjust the infrared headphone volume us- ing the volume control on the headphones. Volume control: Using a lower volume setting on the rear Turn the volume control knob to adjust the vol- seat controller can cause static noise in the ume. infrared headphones. The headphones will automatically be turned off in 30 seconds if there is no sound during that period. To prevent the battery from being dis- charged, keep the power suppy turned off when not in use. Display screen, heater, air conditioner and audio systems 4-41 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 184. PLAYING A DIGITAL VIDEO DISC Pushing the button on the front controls on the faceplate, Red = right channel audio input,(DVD) turns the rear speakers on and off. White = left channel audio input, and Yellow = Video input). It is possible to operate the DVD player by remote CAUTION control. The display will show the “AUX” in the upper left● Only operate the DVD while the vehicle corner of the display for 4 seconds once the Headphones are a wireless type and no cables engine is running. Operating the DVD Mode is changed to AUX. are necessary. You can use them in almost all the for extended periods of time with the ranges in the rear seat. (It is not possible to use To use the input jacks, refer to “Auxiliary input engine OFF can discharge the vehicle the headphones in the front seat.) jacks” in this section. battery. POWER on/off button: or PLAY:● Do not allow the system to get wet. Excessive moisture such as spilled liq- With the ignition switch turned to the ACC or ON uids may cause the system to position, push the POWER button to turn the When the PLAY/PAUSE button on the player or malfunction. DVD player on or off. the PLAY button on the remote control is pushed, the player will play.● The driver must not attempt to wear the Insert the DVD into the slot with the label side headphones while the vehicle is in mo- facing up. The DVD will be guided automatically In play mode, the display will briefly show tion so that full attention may be given into the slot. on the upper left corner of the display. to vehicle operation. If the DVD player is off and a DVD is inserted, the FF (Fast Forward), REW● While playing video CD media, this DVD (Remote control only): DVD player will automatically turn on. player does not guarantee complete functionality of all video CD formats. Push FAST FORWARD/FAST REVERSE but- CAUTION tons to carry out the fast forward or fast reverseWith the DVD player, you can hear DVD videos, Do not force the compact disc into the presentation at 5 times normal play speed.video CDs and CDs using headphones. Passen- slot. This could damage the player. Push FAST FORWARD/FAST REVERSE but-gers in the rear seat can enjoy the sound inde- MODE select button: tons again or PLAY button to resume the normalpendently of the front seat. play speed.Press the REAR AV button located on the front Push the Mode button to select Audio/Videocontrols for more than 1.5 seconds to hear the source between DVD and AUX input (input jackssound of the DVD player through the speakers.4-42 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 185. NEXT CHAPTER/ button is pushed again, it will resume at the ● Use NAVIGATION KEYS to navigate within PREVIOUS CHAPTER stored disc track and time position. the display menu, and use ENTER to select (Remote control only): the item. If the STOP button is pushed again when theWhen the (NEXT CHAPTER) button is player is already in Stop mode, it will reinitialize ● Holding the DISPLAY control on the face-pushed while the DVD is being played, the pro- the pointer to the beginning of the disc. In effect it plate for longer than approximately 2 sec-gram next to the present one will start to play from will ignore the last stored disc position and upon onds while in the display menu will reset theits beginning. Push several times to skip through receipt of the next play message it will begin at display characteristics to their nominal val-programs. The DVD will advance the number of the Title Menu, or at “the beginning of the disc”. ues. (Faceplate feature only)times the button is pushed. When EJECT: If the DISPLAY control button on the faceplate isthe (PREVIOUS CHAPTER) button is pushed for more than 2 seconds, the mediapushed, the program being played returns to its When the EJECT button is pushed with the DVD track/time information will be displayed along thebeginning. Push several times to skip back loaded, it will be ejected. bottom of the display. Pushing the DISPLAY con-through programs. The DVD will go back the The display will show the EJECT symbol in trol for more than 2 seconds will remove thenumber of times the button is pushed. the upper left corner of the display for 4 seconds media track/time information from the display. or PAUSE: once the EJECT button is pushed. (Faceplate feature only) If the DVD is not loaded, the display will show NAVIGATION KEYS:When the PLAY/PAUSE button on the player or “NO DISC”.the PAUSE button on the remote control is If media is in PLAY mode, activation of the NAVI-pushed, the player will pause playing of the me- If the DVD comes out and is not removed within GATION KEYS (Up, Down, Left, and Right) willdia. In pause mode, the player will show on 25 seconds, it will be pulled back into the slot to perform the following functions: nextthe upper left corner of the display until the player protect it. chapter/track, previous chapter/track, fast re-is changed to another mode. verse and fast forward, and the display will DISPLAY: show , , and respec- STOP: If the DISPLAY control is pushed for less than 2 tively in the upper left corner of the display for 4 seconds, the display menu will appear on the seconds. (Faceplate feature only)Push the STOP button once to stop playing the screen. If media is in PAUSE mode, activation of themedia. The display will show in the upper ● The display menu will remain on the screen NAVIGATION KEYS (Up, Down and Right) willleft corner of the display for 4 seconds, and the for 10 seconds if no subsequent control perform the following functions: nextlast disc position will be stored. When the PLAY activations occur. chapter/track, previous chapter/track and slow Display screen, heater, air conditioner and audio systems 4-43 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 186. forward, and the display will show , TITLE (Remote control only): CLEAR (Remote control only):and a forward arrow symbol respectively in the Push TITLE button to return the DVD media to the Push the CLEAR button to clear all numeric in-upper left corner of the display for 4 seconds. “title” of the DVD. puts, if actuated prior to expiration of the(Faceplate feature only) 3-second timer. Push TITLE button again to return to the previousIf media is in activated MENU mode, the NAVI- stop point and play. NUMERIC KEYPAD (0–9 & ≥10) (RemoteGATION KEYS will be used to navigate Up, control only):Down, Left, and Right within the menu. BACK (Remote control only): Push the NUMERIC KEYPAD to directly accessIf display control menu is on, the NAVIGATION Push the BACK button to exit the current active disc chapters, titles or tracks by inputting theirKEYS will be used to navigate Up, Down, Left, menu and return to the previous menu. numeric value.and Right within the menu. SUBTITLE (Remote control only): The “≥10” button input numbers greater than orENTER: Push the SUBTITLE button to call up subtitle equal to 10, allowing up three digits to be inputIn MENU mode, push the ENTER button to select selection menu. for selecting chapter/title/track number.MENU items. Repeatedly press the SUBTITLE button to cycle The subsequent actuation of numeric buttons willIn the display menu, push the ENTER button to through each available subtitle. continuously shift the previously input number toselect items for modification, as per the on- the “left”. AUDIO (Remote control only):screen instructions. The chapter/title/track number will be automati- Push the AUDIO button to call up audio menu.MENU: cally selected (if valid, based on media content) if Repeatedly press the AUDIO button to cycle 3 seconds expire without any keypad inputs.If the media is in PLAY mode and the MENU through each available audio track.button is pressed, the DVD menu will appear on The operator can cancel the inputthe screen. Use Navigation Keys to navigate ANGLE (Remote control only): chapter/title/track number by actuating thewithin the menu, and use ENTER to select the CLEAR control prior to the expiration of the Push the ANGLE button to call up camera angleitem. 3-second timer. menu.Push the MENU button again to return to PLAY These functions can be used only for the DVD Repeatedly press the ANGLE button to cyclemode. discs which correspond to them. through each available angle.4-44 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 187. Auxiliary input jacks ● Do not attempt to use the system inThe auxiliary input jacks are located on the control extreme temperature conditions [below -4°F (-20°C) or above 158°F (70°C)].panel. Compatible devices such as video gamescamcorders and portable video players can be ● Do not attempt to operate the system inconnected to the auxiliary jacks. extreme humidity conditions (less than 10% or more than 75%).The auxiliary jacks are color coded for identifica-tion purposes. ● Yellow - video input ● White - left channel audio input ● Red - right channel audio inputCARE AND MAINTENANCE LHA0049Use a lightly dampened, lint free cloth to clean the HOW TO HANDLE THE DVDsurfaces of your NISSAN mobile entertainmentsystem. (DVD player face, screen, remote con- CAUTIONtrol, etc.) ● Handle a DVD by its edges. Never touch CAUTION the surface of the disc.● Do not use any solvents or cleaning ● To clean a disc, wipe the surface from solutions when cleaning the video the center to the outer edge using a system. clean, soft cloth. Do not wipe the disc using a circular motion.● Do not use excessive force on the moni- tor screen. ● Do not use a conventional record cleaner, benzine, thinner or alcohol in-● Avoid touching or scratching the moni- tended for industrial use. tor screen as it may become dirty or damaged. Display screen, heater, air conditioner and audio systems 4-45 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 188. ● A new disc may be rough on its inner and outer edges. Remove the rough edges using the side of a pen or pencil as illustrated.● Never attempt to use a DVD that has been cracked, deformed, or repaired using adhesive. Doing so may cause damage to the equipment. ● Handle the DVD carefully to avoid contami- nation or flaws. Otherwise, signals may not be read properly. ● Do not write, draw or attach anything on any side of the DVD. LHA0318 SAA0723 ● Do not store the DVD in locations with direct Remote control and headphones bat- If the battery is removed for any reason sunlight or in high temperatures or humidity. tery replacement other than replacement close the lid se- curely. ● Always place discs in the storage case when Replace the battery as follows: they are not being used. ● If you will not be using the remote control for ● Do not put on any sticker or write anything 1. Open the lid. long periods of time, remove the batteries. on either surface of the DVD. 2. Replace batteries with new ones. ● Replacement of the batteries is needed when the remote control only functions at ● Size AA (remote control) extremely close distances to the DVD player ● Size AAA (headphones) or not at all. Make sure that the and ends on ● Be careful not to touch the battery terminal. the batteries match the markings inside the ● An improperly disposed battery can harm compartment. the environment. Always confirm local regu- 3. Close the lid securely. lations for battery disposal.4-46 Display screen, heater, air conditioner and audio systems ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 189. CAR PHONE OR CB RADIO ● When changing batteries, do not let dust or When installing a CB, ham radio or car phone in CAUTION oil get on the remote control and head- your NISSAN, be sure to observe the following phones. cautions, otherwise the new equipment may ad- ● Keep the antenna as far away as pos- versely affect the MFI (Multiport Fuel Injection) sible from the Engine Control ModuleFCC Notice: (ECM). system and other electronic parts.Changes or modifications not expressly ap- ● Keep the antenna wire more than 8 inproved by the manufacturer compliance WARNING (20 cm) away from the Multiport Fuelcould void the user’s authority to operate Injection harness. Do not route the an- ● A cellular telephone should not be usedthe equipment. This device complies with tenna wire next to any harness. while driving so full attention may bePart 15 of the FCC Rules and RSS-210 of given to vehicle operation. Some juris- ● Adjust the antenna standing-wave ratioIndustry Canada. Operation is subject to dictions prohibit the use of cellular tele- as recommended by the manufacturer.the following two conditions: (1) This de- phones while driving.vice may not cause harmful interference, ● Connect the ground wire from the CBand (2) this device must accept any inter- ● If you must make a call while your ve- radio chassis to the body.ference received, including interference hicle is in motion, the hands free cellu-that may cause undesired operation of the lar phone operational mode (if so ● For details, consult a NISSAN dealer.device. equipped) is highly recommended. Ex- ercise extreme caution at all times so full attention may be given to vehicle operation. ● If a conversation in a moving vehicle requires you to take notes, pull off the road to a safe location and stop your vehicle before doing so. Display screen, heater, air conditioner and audio systems 4-47 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 190. MEMO4-48 Display screen, heater, air conditioner and audio systems
  • 191. 5 Starting and drivingPrecautions when starting and driving. . . . . . . . . . . . . . . . 5-2 Cruise control operations. . . . . . . . . . . . . . . . . . . . . . . 5-17 Exhaust gas (carbon monoxide) . . . . . . . . . . . . . . . . . . 5-2 Break-in schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19 Three-way catalyst. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Increasing fuel economy. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19 On-pavement and off-road driving Using four wheel drive (4WD) . . . . . . . . . . . . . 5-20 precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Transfer case shifting procedures . . . . . . . . . . . . . . . 5-20 Low tire pressure warning system . . . . . . . . . . . . . . . . 5-3 Parking/parking on hills. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26 Avoiding collision and rollover . . . . . . . . . . . . . . . . . . . . 5-5 Power steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27 Drinking alcohol/drugs and driving. . . . . . . . . . . . . . . . 5-5 Brake system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27 Driving safety precautions . . . . . . . . . . . . . . . . . . . . . . . 5-5 Brake precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27Ignition switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Anti-lock brake system (ABS) . . . . . . . . . . . . . . . . . . . 5-28 Automatic transmission. . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Vehicle dynamic control (VDC) system . . . . . . . . . . . . . . 5-29 Key positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Nissan vehicle immobilizer system (NVIS) . . . . . . . . . 5-8 Rear sonar system (if so equipped) . . . . . . . . . . . . . . . . . 5-30Before starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Cold weather driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31Starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 Freeing a frozen door lock . . . . . . . . . . . . . . . . . . . . . . 5-31Driving the vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 Anti-freeze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31 Engine protection mode . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31 Automatic transmission. . . . . . . . . . . . . . . . . . . . . . . . . 5-10 Draining of coolant water . . . . . . . . . . . . . . . . . . . . . . . 5-31Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16 Tire equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32Cruise control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17 Special winter equipment. . . . . . . . . . . . . . . . . . . . . . . 5-32 Precautions on cruise control . . . . . . . . . . . . . . . . . . . 5-17 Driving on snow or ice . . . . . . . . . . . . . . . . . . . . . . . . . 5-32 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 192. PRECAUTIONS WHEN STARTINGAND DRIVING WARNING ● Do not run the engine in closed spaces b. You suspect that exhaust fumes are such as a garage. entering into the passenger● Do not leave children, impaired adults, compartment. or pets alone in your vehicle. They could ● Do not park the vehicle with the engine accidentally injure themselves or oth- running for any extended length of time. c. You notice a change in the sound of ers through inadvertent operation of the exhaust system. ● Keep the back door and rear vent win- the vehicle. Also, on hot, sunny days, dows closed while driving, otherwise d. You have had an accident involving temperatures in a closed vehicle could exhaust gases could be drawn into the damage to the exhaust system, un- quickly become high enough to cause passenger compartment. If you must derbody, or rear of the vehicle. severe or possibly fatal injuries to drive with the back door or rear vent people or animals. windows open, follow these THREE-WAY CATALYST● Properly secure all cargo with ropes or precautions: The three-way catalyst is an emission control straps to help prevent it from sliding or 1. Open all the windows. device installed in the exhaust system. Exhaust shifting. Do not place cargo higher than 2. Set the air recirculation but- gases in the three-way catalyst are burned at the seatbacks. In a sudden stop or col- lision, unsecured cargo could cause ton to off and the fan control dial to high temperatures to help reduce pollutants. personal injury. high to circulate the air. WARNINGEXHAUST GAS (carbon monoxide) ● If electrical wiring or other cable con- nections must pass to a trailer through ● The exhaust gas and the exhaust sys- the seal on the back door or the body, tem are very hot. Keep people, animals WARNING or flammable materials away from the follow the manufacturer’s recommen-● Do not breathe exhaust gases; they con- dation to prevent carbon monoxide en- exhaust system components. tain colorless and odorless carbon mon- try into the vehicle. ● Do not stop or park the vehicle over oxide. Carbon monoxide is dangerous. It flammable materials such as dry grass, ● The exhaust system and body should be can cause unconsciousness or death. waste paper or rags. They may ignite inspected by a qualified mechanic● If you suspect that exhaust fumes are whenever: and cause a fire. entering the vehicle, drive with all win- a. The vehicle is raised for service. dows fully open, and have the vehicle inspected immediately.5-2 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 193. CAUTION ON-PAVEMENT AND OFF-ROAD LOW TIRE PRESSURE WARNING DRIVING PRECAUTIONS SYSTEM● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- Utility vehicles have a significantly higher This vehicle is equipped with the low tire pres- duce the three-way catalyst’s ability to rollover rate than other types of vehicles. sure warning system, which displays pressure of help reduce exhaust pollutants. all tires (except the spare tire) on the display They have higher ground clearance than passen-● Keep your engine tuned up. Malfunc- ger cars to make them capable of performing in a screen (if so equipped) by sending a signal from tions in the ignition, fuel injection, or variety of on-pavement and off-road applications. a sensor that is installed in each wheel. electrical systems can cause overrich This gives them a higher center of gravity than The low tire pressure warning system will activate fuel flow into the three-way catalyst, ordinary cars. An advantage of higher ground only when the vehicle is driven at speeds above causing it to overheat. Do not keep driv- clearance is a better view of the road, allowing 20 MPH (32 km/h). Also, this system may not ing if the engine misfires, or if notice- you to anticipate problems. However, they are not detect a sudden drop in tire pressure (for ex- able loss of performance or other un- designed for cornering at the same speeds as ample a flat tire while driving). usual operating conditions are conventional two-wheel drive vehicles any more detected. Have the vehicle inspected than low-slung sports cars are designed to per- Tire pressure rises and falls depending on the promptly by a NISSAN dealer. form satisfactorily under off-road conditions. If at heat caused by the vehicle’s operation and the all possible, avoid sharp turns at high speeds. As outside temperature. Low outside temperature● Avoid driving with an extremely low fuel with other vehicles of this type, failure to operate can lower the temperature of the air inside the tire level. Running out of fuel could cause this vehicle correctly may result in loss of control which can cause a lower tire inflation pressure. the engine to misfire, damaging the or vehicle rollover. In a rollover crash, an unbelted This may cause the low tire pressure warning three-way catalyst. person is significantly more likely to die than a light to illuminate.● Do not race the engine while warming it person wearing a seat belt. If the warning light illuminates in low ambient up. Be sure to read the driving safety precautions temperature as described above, check the tire● Do not push or tow your vehicle to start later in this section. pressure for all four tires. Adjust the tire pressure the engine. to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the low tire pressure warning light OFF. Frequently check the tire pressure information display on the display screen (if so equipped) and adjust pressure of each tire properly. (The order Starting and driving 5-3 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 194. of the tire pressure figures displayed on the ● Do not inject any tire liquid or aerosol WARNINGscreen does not correspond with the actual order tire sealant into the tires, as this mayof the tire position.) See “Tire pressure informa- ● If the low tire pressure warning light cause a malfunction of the tire pressuretion” in the “Display screen, heater, air condi- flashes while driving, avoid sudden sensors.tioner and audio systems” section for tire pres- steering maneuvers or abrupt braking,sure monitor. reduce vehicle speed, pull off the road to a safe location and stop the vehicle CAUTIONLow tire pressure warning as soon as possible. Serious vehicle Do not place metalized film or any metal damage could occur and may lead to an parts (antenna, etc.) on the windows. ThisIf the vehicle is being driven with very low tire accident and could result in serious may cause poor reception of the signalspressure (lower than 28 psi, 193 kPa), the low personal injury. Check the tire pressure from the tire pressure sensors, and thetire pressure warning light comes on and the for all four tires. Adjust the tire pressure low tire pressure warning system will notchime sounds for about 10 seconds. to the recommended COLD tire pres- function properly.For additional information regarding the above sure shown on the Tire and Loading Information label to turn the low tire FCC Notice:warning, see “Warning/indicator lights and au- pressure warning light OFF. If you have Changes or modifications not expressly ap-dible reminders” in the “Instruments and con- a flat tire, replace it with a spare tire as proved by the manufacturer compliancetrols” section. soon as possible. (See “Flat tire” in the could void the user’s authority to operate “In case of emergency” section for the equipment. changing a flat tire.) This device complies with Part 15 of the ● When a spare tire is mounted or a wheel FCC Rules and RSS-210 of Industry is replaced, tire pressure will not be Canada. indicated and the low tire pressure warning system will not function. Con- Operation is subject to the following two tact your NISSAN dealer as soon as conditions: (1) This device may not cause possible for tire replacement and/or harmful interface, and (2) this device must system resetting. accept any interference received, including interference that may cause undesired op- eration of the device.5-4 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 195. AVOIDING COLLISION AND DRINKING ALCOHOL/DRUGS AND DRIVING SAFETY PRECAUTIONSROLLOVER DRIVING Your NISSAN is designed for both normal and off-road use. However, avoid driving in deep wa- WARNING WARNING ter or mud as your NISSAN is mainly designed forFailure to operate this vehicle in a safe Never drive under the influence of alcohol leisure use, unlike a conventional off-road ve-and prudent manner may result in loss of or drugs. Alcohol in the bloodstream re- hicle.control or an accident. duces coordination, delays reaction time and impairs judgement. Driving after Remember that two-wheel drive models are lessBe alert and drive defensively at all times. Obey drinking alcohol increases the likelihood capable than four-wheel drive models for roughall traffic regulations. Avoid excessive speed, of being involved in an accident injuring road driving and extrication when stuck in deephigh speed cornering, or sudden steering ma- yourself and others. Additionally, if you snow or mud, or the like.neuvers, because these driving practices could are injured in an accident, alcohol can Please observe the following precautions:cause you to lose control of your vehicle. As with increase the severity of the injury.any vehicle, loss of control could result in acollision with other vehicles or objects, or NISSAN is committed to safe driving. However, WARNINGcause the vehicle to roll over, particularly if you must choose not to drive under the influence ● Drive carefully when off the road andthe loss of control causes the vehicle to of alcohol. Every year thousands of people are avoid dangerous areas. Every personslide sideways. Be attentive at all times, and injured or killed in alcohol-related accidents. Al- who drives or rides in this vehicleavoid driving when tired. Never drive when under though the local laws vary on what is considered should be seated with their seat beltthe influence of alcohol or drugs (including pre- to be legally intoxicated, the fact is that alcohol fastened. This will keep you and yourscription or over-the-counter drugs which may affects all people differently and most people passengers in position when drivingcause drowsiness). Always wear your seat belt underestimate the effects of alcohol. over rough terrain.as outlined in the “Safety – Seats, seat belts and Remember, drinking and driving don’t mix! And ● Do not drive across steep slopes. In-supplemental air bags” section of this manual, that is true for drugs, too (over-the-counter, pre- stead drive either straight up or straightand also instruct your passengers to do so. scription, and illegal drugs). Don’t drive if your down the slopes. Off-road vehicles canSeat belts help reduce the risk of injury in colli- ability to operate your vehicle is impaired by alco- tip over sideways much more easilysions and rollovers. In a rollover crash, an hol, drugs, or some other physical condition. than they can forward or backward.unbelted or improperly belted person issignificantly more likely to be injured orkilled than a person wearing a seat belt. Starting and driving 5-5 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 196. ● Many hills are too steep for any vehicle. ● Unsecured cargo can be thrown around ● Lower your speed when encountering If you drive up them, you may stall. If when driving over rough terrain. Prop- strong crosswinds. With a higher center you drive down them, you may not be erly secure all cargo so it will not be of gravity, your NISSAN is more af- able to control your speed. If you drive thrown forward and cause injury to you fected by strong side winds. Slower across them, you may roll over. or your passengers. speeds ensure better vehicle control.● Do not shift gears while driving on ● To avoid raising the center of gravity ● Do not drive beyond the performance downhill grades as this could cause excessively, do not exceed the rated capablity of the tires, even with 4WD loss of control of the vehicle. capacity of the roof rack (if so engaged. equipped) and evenly distribute the● Stay alert when driving to the top of a ● Accelerating quickly, sharp steering load. Secure heavy loads in the cargo hill. At the top there could be a drop-off maneuvers or sudden braking may area as far forward and as low as pos- or other hazard that could cause an cause loss of control. sible. Do not equip the vehicle with tires accident. larger than specified in this manual. ● If at all possible, avoid sharp turning● If your engine stalls or you cannot make This could cause your vehicle to roll maneuvers, particularly at high speeds. it to the top of a steep hill, never at- over. Your NISSAN four-wheel drive vehicle tempt to turn around. Your vehicle has a higher center of gravity than a ● Do not grip the inside or spokes of the could tip or roll over. Always back two-wheel drive vehicle. The vehicle is steering wheel when driving off-road. straight down in R (Reverse) gear. Never not designed for cornering at the same The steering wheel could move sud- back down in N (Neutral), using only the speeds as conventional two-wheel denly and injure your hands. Instead brake, as this could cause loss of drive vehicles. Failure to operate this drive with your fingers and thumbs on control. vehicle correctly could result in loss of the outside of the rim. control and/or a rollover accident.● Heavy braking going down a hill could ● Before operating the vehicle, ensure cause your brakes to overheat and fade, ● Always use tires of the same type, size, that the driver and all passengers have resulting in loss of control and an acci- brand, construction (bias, bias-belted, their seat belts fastened. dent. Apply brakes lightly and use a low or radial), and tread pattern on all four gear to control your speed. wheels. Install tire chains on the rear wheels when driving on slippery roads and drive carefully.5-6 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 197. IGNITION SWITCH● Be sure to check the brakes immedi- 1. Move the shift selector lever into the P (Park) ately after driving in mud or water. See position. “Brake system” later in this section for 2. Turn the ignition key slightly toward the ON “Wet brakes”. position.● Avoid parking your vehicle on steep 3. Turn the key to the LOCK position. hills. If you get out of the vehicle and it rolls forward, backward or sideways, 4. Remove the key. you could be injured. The shift selector lever is designed so it cannot● Whenever you drive off-road through moved out of P (Park) and into any of the other sand, mud or water as deep as the gear positions if the ignition key is turned to OFF wheel hub, more frequent maintenance position or if the key is removed from the switch. may be required. See “Periodic mainte- The shift selector lever can be moved if the nance” in the “NISSAN Service and ignition switch is in the ACC position. This Maintenance Guide.” WSD0041 allows the vehicle to be moved if the bat- AUTOMATIC TRANSMISSION tery is discharged. The shift selector lever can also be moved if the ignition switch is The ignition lock is designed so the key cannot be in the ON position and the foot brake pedal turned to LOCK position and removed until the is depressed. shift selector lever is moved to the P (Park) posi- tion. There is an OFF position between the LOCK and ACC positions. The OFF position When removing the key from the ignition, make is indicated by a “1” on the key cylinder. sure the shift selector lever is in the P (Park) When the ignition is in the OFF position, position. the steering wheel is not locked. If the selector lever is not returned to P (Park) In order for the steering wheel to be locked, it position, the key cannot be moved to the LOCK must be turned about 1/8 of a turn clockwise position. from the straight up position. When the key cannot be turned to the LOCK To lock the steering wheel, turn the key to position, proceed as follows to remove the key. the LOCK position. Remove the key. To Starting and driving 5-7 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/12/03—skoniecz ੭
  • 198. BEFORE STARTING THE ENGINEunlock the steering wheel, insert the key NISSAN VEHICLE IMMOBILIZER ● Make sure the area around the vehicle isand turn it gently while rotating the steer- SYSTEM (NVIS) clear.ing wheel slightly right and left. The NISSAN Vehicle Immobilizer System (NVIS) ● Check fluid levels such as engine oil, cool- will not allow the engine to start without the use of ant, brake fluid, and window washer fluid as WARNING frequently as possible, or at least whenever the registered NVIS key.Never remove or turn the key to the LOCK you refuel.position while driving. The steering wheel If the engine fails to start using the registered NVIS key, it may be due to interference caused by ● Check that all windows and lights are clean.will lock. This may cause the driver to losecontrol of the vehicle and could result in another NVIS key, an automated toll road device ● Visually inspect tires for their appearanceserious vehicle damage or personal injury. or automated payment device on the key ring. and condition. Also check tires for proper Restart the engine using the following proce- inflation.KEY POSITIONS dures: ● Lock all doors.LOCK: Normal parking position (0) 1. Leave the ignition switch in the ON position for approximately 5 seconds. ● Position seat and adjust head restraints.OFF: (Not used) (1) 2. Turn the ignition switch to the OFF or LOCK ● Adjust inside and outside mirrors.ACC: (Accessories) (2) position and wait approximately 5 seconds. ● Fasten seat belts and ask all passengers toThis position activates electrical accessories do likewise. 3. Repeat step 1 and 2 again.such as the radio when the engine is not running. 4. Restart the engine while holding the device ● Check the operation of warning lights whenON: Normal operating position (3) the key is turned to the ON (3) position. See (which may have caused the interference)This position turns on the ignition system and the separate from the registered NVIS key. “Warning/indicator lights and audible re-electrical accessories. minders” in the “Instruments and controls” If this procedure allows the engine to start, section of this manual.START: (4) NISSAN recommends placing the registered NVIS key on a separate key ring to avoid interfer-This position starts the engine. As soon as the ence from other devices.engine has started, release the key. It automati-cally returns to the ON position.5-8 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 199. STARTING THE ENGINE DRIVING THE VEHICLE1. Apply the parking brake. cranking the engine, release the accel- ENGINE PROTECTION MODE erator pedal. Crank the engine with your2. Move the shift selector lever to P (Park) or N foot off the accelerator pedal by turn- The engine has an engine protection mode to (Neutral). P (Park) is recommended. ing the ignition key to START. Release the reduce the chance of damage if the coolant tem- key when the engine starts. If the engine perature becomes too high (for example, when The shift selector lever cannot be starts, but fails to run, repeat the above climbing steep grades in high temperature with moved out of P (Park) and into any of procedure. heavy loads, such as when towing a trailer). the other gear positions if the ignition When the engine temperature reaches a certain key is turned to the OFF position or if level: the key is removed from the ignition CAUTION switch. Do not operate the starter for more than ● The engine coolant temperature gauge will 15 seconds at a time. If the engine does move toward the H position. The starter is designed not to operate if the shift selector lever is in any of the not start, turn the key off and wait 10 ● Engine power may be reduced. driving positions. seconds before cranking again, otherwise the starter could be damaged. ● The air conditioning cooling function may be3. Crank the engine with your foot off the automatically turned OFF for a short time accelerator pedal by turning the ignition 4. Allow the engine to idle for at least 30 sec- (the blower will continue to operate). key to START. Release the key when the onds after starting. Do not race the engine while warming it up. Drive at moderate Engine power and, under some conditions, ve- engine starts. If the engine starts, but fails to speed for a short distance first, especially in hicle speed will decrease. Vehicle speed can be run, repeat the above procedure. cold weather. controlled with the accelerator pedal, but the ● If the engine is very hard to start in ex- vehicle may not accelerate at the desired speed. tremely cold weather or when restarting, In cold weather, keep the engine running for The transmission will downshift or upshift as it depress the accelerator pedal a little (ap- a minimum of 2–3 minutes before shutting it reaches prescribed shift points. You can also proximately 1/3 to the floor) and hold it off. Starting and stopping the engine over a shift manually. and then crank the engine. Release the short period of time may make the vehicle more difficult to start. As driving conditions change and engine coolant key and the accelerator pedal when the temperature is reduced, vehicle speed can be engine starts. increased using the accelerator pedal, and air ● If the engine is very hard to start because conditioning cooling function will automatically it is flooded, depress the accelerator be turned back ON. pedal all the way to the floor and hold it. Crank the engine for 5-6 seconds. After Starting and driving 5-9 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 200. If: WARNING AUTOMATIC TRANSMISSION 1. The engine coolant temperature is not re- Overheating can result in reduced engine duced. WARNING power and vehicle speed. The reduced speed may be lower than other traffic, ● Do not depress the accelerator pedal 2. The air conditioning cooling function does which could increase the chance of a col- while shifting from P (Park) or N (Neu- not turn back ON. lision. Be especially careful when driving. tral) to R (Reverse), or L (Low). Always 3. The engine oil pressure warning/engine Pull to the side of the road to a safe area. depress the brake pedal until shifting is coolant temperature high indicator il- Allow the engine to cool and return to completed. Failure to do so could cause luminates, this may indicate a malfunction. normal operation. See “If your vehicle you to lose control and have an Move the vehicle off the road in a safe area overheats” in the “In case of emergency” accident. and allow the engine to cool. If after check- section of this manual. ● Cold engine idle speed is high, so use ing the oil and coolant, the remains caution when shifting into a forward or on, do not continue to drive and call a CAUTION reverse gear before the engine has NISSAN dealer. warmed up. Running the engine with the engine oilThe Malfunction indicator lamp may also come pressure warning light on could cause se- ● Never shift to P (Park) or R (Reverse)ON. If only it remains on, you do not need to have rious damage to the engine almost imme- while the vehicle is moving. This couldyour vehicle towed, but have it inspected soon by diately. Such damage is not covered by cause an accident.a NISSAN dealer. See “Malfunction indicator warranty. Turn off the engine as soon as itlight” in the “Warning and indicator lights” section is safe to do so. CAUTIONof this manual. ● When stopping the vehicle on an uphill grade, do not hold the vehicle by de- pressing the accelerator pedal. The foot brake should be used for this purpose. ● Do not downshift abruptly on slippery roads. This may cause a loss of control. The automatic transmission in your vehicle is electronically controlled to produce maximum power and smooth operation.5-10 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 201. The recommended operating procedures for this WARNINGtransmission are shown on the following pages.Follow these procedures for maximum vehicle Apply the parking brake if the selectorperformance and driving enjoyment. lever is in any position while the engine is not running. Failure to do so could causeStarting the vehicle the vehicle to move unexpectedly or roll 1. After starting the engine, fully depress the away and result in serious personal injury foot brake pedal before attempting to move or property damage. the shift selector lever out of the P (Park) If the key is turned to the OFF or ACC position for position. any reason while the vehicle is in N (Neutral), or 2. Keep the foot brake pedal depressed and any D (Drive) position, the key cannot be turned move the shift selector lever into a driving to the LOCK position and be removed from the gear. ignition switch. Move the selector lever to the P 3. Release the foot brake, then gradually start WSD0098 (Park) position, then the key can be turned to the vehicle in motion. LOCK. To move the selector lever:The automatic transmission is designed so P (Park): : Shift while depressing the brake pedalthe foot brake pedal MUST be depressed Use this selector position when the vehicle isbefore shifting from P (Park) to any drive : Shift without depressing brake pedal parked or when starting the engine. Make sureposition while the ignition switch is in theON position. Shifting – console the vehicle is completely stopped. The brake pedal must be depressed to move the se-The shift selector lever cannot be moved After starting the engine, fully depress the brake lector lever from N (Neutral) or any driveout of P (Park) and into any of the other pedal and move the shift selector lever out of the position to P (Park). Apply the parking brake.gear positions if the ignition key is turned P (Park) position. When parking on a hill, apply the parking braketo the LOCK, OFF or ACC position or if the first, then move the shift selector lever into the Pkey is removed. (Park) position. Starting and driving 5-11 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 202. R (Reverse): 4H: 1 (Low gear): 62 MPH (100 km/h) Use this position when climbing steep hills slowly CAUTION or slow driving through deep snow, sand or mud,Use this position only when the vehicle is 4LO: or for maximum engine braking on steep downhillcompletely stopped. 31 MPH (50 km/h) grades.Use this position to back up. Make sure the 3 (Third gear): Do not downshift into the 1 position at speedsvehicle is completely stopped before selecting over the following and do not exceed the follow-the R (Reverse) position. The brake pedal Use this position for driving up and down long ing speeds in the 1 position.must be depressed to move the selector slopes where engine braking would be advanta- geous. 2WD and AUTO:lever from P (Park), N (Neutral) or any driveposition to R (Reverse). 43 MPH (70 km/h) w/o tow mode 2 (Second gear):N (Neutral): 37 MPH (60 km/h) w/tow mode Use this position for hill climbing or engine brak-Neither forward nor reverse gear is engaged. The ing on downhill grades. 4H:engine can be started in this position. You may 43 MPH (70 km/h) w/o tow mode Do not downshift into the 2 position at speedsshift to N (Neutral) and restart a stalled enginewhile the vehicle is moving. over the following and do not exceed the follow- 37 MPH (60 km/h) w/tow mode ing speeds in the 2 position.D (Drive): 4LO: 2WD and AUTO:Use this position for all normal forward driving. 31 MPH (50 km/h) 71 MPH (115 km/h) w/o tow mode4 (Fourth gear): 62 MPH (100 km/h) w/tow modeUse this position for driving up and down longslopes where engine braking would be advanta- 4H:geous. 62 MPH (100 km/h)Do not downshift into the 4 position at speeds 4LO:over the following and do not exceed the follow-ing speeds in the 4 position. 31 MPH (50 km/h)5-12 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 203. R (Reverse): WARNING Apply the parking brake if the selector CAUTION lever is in any position while the engine is not running. Failure to do so could cause Use this position only when the vehicle is the vehicle to move unexpectedly or roll completely stopped. away and result in serious personal injury Use this position to back up. Make sure the or property damage. vehicle is completely stopped before selecting the R (Reverse) position. The brake pedal If the key is turned to the OFF or ACC position for must be depressed to move the selector any reason while the vehicle is in N (Neutral), or lever from P (Park), N (Neutral) or any drive any D (Drive) position, the key cannot be turned position to R (Reverse). to the LOCK position and be removed from the ignition switch. Move the selector lever to the P N (Neutral): LSD0099 (Park) position, then the key can be turned to Neither forward nor reverse gear is engaged. The LOCK. engine can be started in this position. You mayTo move the selector lever: P (Park): shift to N (Neutral) and restart a stalled engine : Shift while depressing the brake pedal while the vehicle is moving. Use this selector position when the vehicle is : Shift without depressing brake pedal D (Drive): parked or when starting the engine. Make sureShifting – column the vehicle is completely stopped. The brake Use this position for all normal forward driving. pedal must be depressed to move the se-After starting the engine, fully depress the brake lector lever from N (Neutral) or any drivepedal and move the shift selector lever out of the position to P (Park). Apply the parking brake.P (Park) position. When parking on a hill, apply the parking brake first, then move the shift selector lever into the P (Park) position. Starting and driving 5-13 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 204. M4 (Fourth): M1 (First): For driving up or down long slopes where engine Use this position when climbing steep hills slowly braking would be advantageous. or driving slowly through deep snow, sand or mud, or for maximum engine braking on steep Shift ranges up or down one by one as follows: downhill grades. M1 → M2 → M3 → M4 M1 will be displayed on the position indicator on M4 will be displayed on the position indicator in the meter. the meter. ● Remember not to drive at high speeds for M3 (Third): extended periods of time in lower than M4 range. This reduces fuel economy. Use for hill climbing or engine braking on downhill grades. When shifting up: LSD0100 Shift ranges up or down one by one as follows: Move the selector lever to the + (up) side. (ShiftsManual shift mode to higher range.) M1 → M2 → M3 When shifting down:When the manual shift mode button is pressed M3 will be displayed on the position indicator inwhile driving, the transmission enters the manual the meter. Move the selector lever to the Ϫ (down) side.shift mode. Shift ranges can be selected manu- (Shifts to lower range.) M2 (Second)ally. ● The transmission will automatically shift the Use for hill climbing or engine braking on downhillIn the manual shift mode, the shift range is dis- gears between the 1st and the selected grades.played on the position indicator in the meter. After range. (For example, if you select the 3rdpressing the manual shift mode button, the posi- Shift ranges up or down one by one as follows: range, the transmission will shift up or downtion indicator first displays M4 (Fourth) between the 1st and 3rd gears.) M1 → M2Shift ranges up or down one by one as follows: ● Moving the selector lever rapidly to the same M2 will be displayed on the position indicator in side twice will shift the ranges in succession.M1→ M2 → M3 → M4→D the meter. When canceling the manual shift mode:5-14 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 205. Press the manual shift mode button to return thetransmission to the normal driving mode. ● In the manual shift mode, the transmis- sion may not shift to the selected gear immediately because of vehicle speed. The transmission will up or down shift when vehicle speed matches the pro- grammed transmission shift points. This helps maintain driving perfor- mance and reduces the chance of ve- hicle damage or loss of control. ● In the manual shift mode, the transmis- sion will not up shift to a higher gear than is manually selected. When the LSD0090 LSD0101 vehicle speed decreases, the transmis- Console shift Column shift sion automatically shifts down and 1. Turn the ignition key to the LOCK position shifts to 1st gear before the vehicle Shift lock release and remove the key comes to a stop. If the battery is discharged, the shift selector lever may not be moved from the P (Park) position even 2. Apply the parking brake. with the brake pedal depressed. 3. On vehicles equipped with a column shifter, To move the shift selector lever, release the shift tilt the steering wheel down to the lowest lock. The shift selector lever can be moved to N position. (Neutral). However, the steering wheel will be 4. Remove the shift lock release cover as locked unless the ignition switch is turned to the shown. ON position. This allows the vehicle to be moved if the battery is discharged. 5. Insert a small screwdriver in the shift lock release slot and push down. To push the shift lock release, complete the fol- lowing procedure: Starting and driving 5-15 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 206. PARKING BRAKE 6. Move the shift selector lever to the N (Neu- If the vehicle is driven under extreme con- WARNING tral) position while holding down the shift ditions, such as excessive wheel spinning lock release. and subsequent hard braking, the fail-safe ● Be sure the parking brake is fully re- system may be activated. This will occur leased before driving. Failure to do so 7. Turn the key to the ON position to unlock the can cause brake failure and lead to an even if all electrical circuits are functioning steering wheel. Now the vehicle may be accident. properly. In this case, turn the ignition key moved to the desired location. OFF and wait for 3 seconds. Then turn the ● Do not release the parking brake fromIf the shift selector lever cannot be moved out of key back to the ON position. The vehicle outside the vehicle.P (Park), have a NISSAN dealer check the auto- should return to its normal operating con-matic transmission system as soon as possible. dition. If it does not return to its normal ● Do not use the gear shift in place of the operating condition, have a NISSAN dealer parking brake. When parking, be sure WARNING check the transmission and repair it if nec- the parking brake is fully engaged. essary. ● Do not leave children unattended in aIf the selector lever cannot be moved fromthe P (Park) position while the engine is vehicle. They could release the parkingrunning and the brake pedal is depressed, brake and cause an accident.the stop lights may not work. Malfunction-ing stop lights could cause an accidentinjuring yourself and others.Accelerator downshift— in D position —For passing or hill climbing, depress the accel-erator pedal to the floor. This shifts the transmis-sion down into a lower gear, depending on thevehicle speed.Fail-safeWhen the fail-safe operation occurs, please notethat the transmission will be locked in any of theforward gears according to the condition.5-16 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 207. CRUISE CONTROL ● The SET indicator light may blink when the cruise control main switch is turned ON while pushing the ACCEL/RES, COAST/SET, or CANCEL switch (located on the steering wheel). To properly set the cruise control system, use the following pro- cedures. WARNING Do not use the cruise control when driving under the following conditions: ● When it is not possible to keep the vehicle at a set speed. LSD0091 LSD0092 ● In heavy traffic or in traffic that varies inTo engage: Firmly depress the parking brake. 1. ACCEL/RES switch speed.To release: 2. COAST/SET switch ● On winding or hilly roads. 3. ON/OFF switch 1. Firmly apply the foot brake. 4. CANCEL switch ● On slippery roads (rain, snow, ice, etc.). 2. Move the shift selector lever to the P (Park) PRECAUTIONS ON CRUISE ● In very windy areas. position. CONTROL Doing so could cause a loss of vehicle 3. Firmly depress the parking brake pedal control and result in an accident. again and it will release. ● If the cruise control system malfunctions, it cancels automatically. The SET indicator CRUISE CONTROL OPERATIONS 4. Before driving, be sure the brake warning light in the instrument panel then blinks to light goes out. warn the driver. The cruise control allows driving at a speed be- tween 30 - 90 MPH (48 - 144 km/h) without ● If the SET indicator light blinks, turn the keeping your foot on the accelerator pedal. cruise control main switch off and have the system checked by a NISSAN dealer. Starting and driving 5-17 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 208. To turn on the cruise control, push the main ● you depress the brake pedal while pushing ● Push and release the COAST/SET switch.switch. The CRUISE indicator light in the instru- the ACCEL/RES or SET/COAST switch. Each time you do this, the set speed de-ment panel comes on. The preset speed is deleted from memory. creases by about 1 MPH (1.6 km/h).To set cruising speed, accelerate the vehicle to ● the vehicle slows down more than 8 MPH To resume the preset speed, push and re-the desired speed, push the COAST/SET switch (13 km/h) below the set speed. lease the RES/ACCEL switch. The vehicle re-and release it. The SET indicator light in the turns to the last set cruising speed when theinstrument panel comes on. Take your foot off the ● you move the shift selector lever to N (Neu- vehicle speed is over 30 MPH (48 km/h).accelerator pedal. Your vehicle maintains the set tral).speed. To reset at a faster cruising speed, use one ● To pass another vehicle, depress the ac- of the following three methods. celerator pedal. When you release the ● Depress the accelerator pedal. When the pedal, the vehicle returns to the previously vehicle attains the desired speed, push and set speed. release the COAST/SET switch. ● The vehicle may not maintain the set speed ● Push and hold the RES/ACCEL switch. when going up or down steep hills. If this When the vehicle attains the speed you de- happens, drive without the cruise control. sire, release the switch.To cancel the preset speed, use one of the ● Push and release the RES/ACCEL switch.following three methods. Each time you do this, the set speed in- ● Push the CANCEL button; the SET indicator creases by about 1 MPH (1.6 km/h). light in the instrument panel goes out. To reset at a slower cruising speed, use one ● Tap the brake pedal; the SET indicator light of the following three methods. goes out. ● Lightly tap the brake pedal. When the ve- ● Turn the main switch off. Both the CRUISE hicle attains the desired speed, push the indicator light and SET indicator light in the COAST/SET switch and release it. instrument panel go out. ● Push and hold the COAST/SET switch. Re-The cruise control is automatically canceled and lease the switch when the vehicle slows tothe SET light in the instrument panel goes out if: the desired speed.5-18 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 209. BREAK-IN SCHEDULE INCREASING FUEL ECONOMY ● Accelerate slowly and smoothly. Maintain ● When cruising at highway speeds, it is more CAUTION cruising speeds with a constant accelerator economical to use the air conditioner andDuring the first 1,200 miles (2,000 km), position. leave the windows closed to reduce drag.follow these recommendations to obtainmaximum engine performance and en- ● Drive at moderate speeds on the highway. ● Use 4H or 4L position only whensure the future reliability and economy of Driving at high speed lowers fuel economy. necessary. Four-wheel drive operation low-your new vehicle. Failure to follow these ers fuel economy. ● Avoid unnecessary stopping and braking.recommendations may result in short- Maintain a safe distance behind other ve-ened engine life and reduced engine hicles.performance. ● Use a proper gear range which suits road● Avoid driving for long periods at constant conditions. On level roads, shift into high speed, either fast or slow, and do not run the gear as soon as possible. engine over 4,000 rpm. ● Avoid unnecessary engine idling.● Do not accelerate at full throttle in any gear. ● Keep your engine tuned up.● Avoid quick starts. ● Follow the recommended periodic mainte-● Avoid hard braking as much as possible. nance schedule.● Do not tow a trailer for the first 500 miles ● Keep the tires inflated to the correct pres- (800 km). Your engine, axle or other parts sure. Low tire pressure increases tire wear could be damaged. and lowers fuel economy. ● Keep the front wheels in correct alignment. Improper alignment increases tire wear and lowers fuel economy. ● Air conditioner operation lowers fuel economy. Use the air conditioner only when necessary. Starting and driving 5-19 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 210. USING FOUR WHEEL DRIVE(4WD) CAUTION TRANSFER CASE SHIFTING● Do not drive the vehicle in the 4H or 4LO PROCEDURES position on dry hard surface roads. Driv- The part time 4WD system provides 3 positions ing on dry, hard surfaces in 4H or 4LO (2WD, 4H and 4LO), so you can select the may cause unnecessary noise, tire wear desired drive mode according to the driving con- and increased fuel consumption. ditions. If the 4WD warning light turns on when 2WD or 4WD shift procedure: you are driving on dry hard surface roads: ● in the 4H position, shift the 4WD shift switch to 2WD. ● in the 4LO position, stop the vehicle, move the automatic transmission shift selector lever to the N position and shift the 4WD shift switch to 2WD. Have your vehicle checked by a NISSAN dealer as soon as possible.5-20 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 211. Indicator Light 4WD Shift Wheels Use Conditions 4WD Shift Procedure Switch Position Driven 4WD shift Transfer 4LO position Move the 4WD switch. Rear For driving on dry, paved roads (Economy 2WD <—> 4H wheels drive) or state dynamometer I/M testing 4WD shift indicator light will indicate transfer shift position 2WD engaged. IT IS NOT NECESSARY TO MOVE THE AUTOMATIC TRANSMISSION SELECT LEVER TO THE N POSITION IN 4 For driving on rocky, sandy or snow- THIS OPERATION. PERFORM THIS OPERATION WHEN wheels covered roads DRIVING STRAIGHT. 4H Neutral Neutral disengages the automatic transmis- 1. Stop the vehicle. *1 sion mechanical parking lock, which will 2. With the brake pedal depressed, move the automatic May blink allow the vehicle to roll. Do not leave the transmission selector lever to the N position. transfer shift position in Neutral.*2 3. Push the 4WD shift switch and move it to 4LO or 4H. YOU CANNOT MOVE THE TRANSFER 4WD SHIFT SWITCH BETWEEN 4H AND 4LO (OR 4LO TO 4H)UN- 4 For use when maximum power and traction LESS YOU HAVE FIRST STOPPED THE VEHICLE AND 4LO wheels Illuminated is required (for example: on steep grades or MOVED THE AUTOMATIC TRANSMISSION SHIFT LEVER rocky, sandy, muddy roads) TO NEUTRAL. *3*1: The transfer 4LO position indicator light may blink. Stop the vehicle. Be sure to shift the 4WD shift switch after the automatic transmission lever has been shifted to the N position. If theindicator light keeps blinking after the 4WD shift procedure in the previous page, drive slowly without abrupt maneuvers for a while. Then the light will turn on or off.• Avoid making a turn or abrupt starts while shifting to 4LO. Otherwise gears may grind, damaging the drive system.*2: While changing in and out of 4LO, the ignition key must be ON and the vehicle’s engine must be running for a shift to take place and for the indicator lights (4WD shift and 4LO positionindicator) to be operable. Otherwise, the shift will not take place and no indicator lights will be on or flashing.*3: Make sure the transfer 4LO position indicator light turns on when you shift the 4WD shift switch to 4LO.The transfer case 4WD shift switch is used to select either 2WD or 4WD depending on the driving conditions. There are three types of drive modes available, 2WD, 4H and 4LO.The 4WD shift switch electronically controls the transfer case operation. Rotate the switch to move between each mode, 2WD, 4H and 4LO.You must push the switch in to select 4LO, and the vehicle MUST be stationary and the automatic transmission selector lever in the N position when changing into orout of 4LO. Starting and driving 5-21 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 212. WARNING ● When driving straight, shift the 4WD ● The 4WD transfer case may not be shift switch to the 2WD or 4H position. shifted between 4H and 4LO at low am-When parking, apply the parking brake Do not move the 4WD shift switch when bient temperatures and the transferbefore stopping the engine and make sure making a turn or reversing. 4LO position indicator light may blinkthat the 4WD shift indicator light is on and even when the 4WD shift switch isthe ATP warning light goes off. Otherwise, ● Do not shift the 4WD shift switch (be- shifted. After driving for a while you canthe vehicle could unexpectedly move even tween 2WD and 4H) while driving on change the 4WD transfer case betweenif the automatic transmission is in the P steep downhill grades. Use the engine 4H and 4LO.position. brake and low automatic transmission gears (D1 or D2) for engine braking. When driving on rough roads, CAUTION ● Do not operate the 4WD shift switch ● Set the 4WD shift switch to 4H or 4LO.● Never shift the 4WD shift switch be- (between 2WD and 4H) with the rear tween 4LO and 4H while driving. wheels spinning. ● Drive carefully according to the road surface conditions.● The 4H position provides greater power ● Do not drive on dry hard surface roads and traction. Avoid excessive speed, as in the 4H or 4LO position. Driving on dry When the vehicle is stuck, it will cause increased fuel consump- hard surfaces in 4H or 4LO may cause unnecessary noise and tire wear. ● Place stones or wooden blocks under the tion and higher oil temperatures, and tires to free the vehicle. could damage drivetrain components. NISSAN recommends driving in the Speeds over 62.5 MPH (100 km/h) in 4H 2WD position under these conditions. ● Set the 4WD shift switch to 4H or 4LO. is not recommend. ● Vehicles equipped with a limited slip ● If it is difficult to free the vehicle, repeat● The 4LO position provides maximum differential (LSD) have improved driving forward and backward movement to in- power and traction. Avoid raising ve- performance on rough roads. They have crease the movement. hicle speed excessively, as the maxi- increased traction performance, so mum speed is approximately 31 MPH when making a turn on paved roads, ● If the vehicle is stuck deep in mud, tire chains (50 km/h). vibration and tire squealing may occur. may be effective.5-22 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 213. CAUTION CAUTION● Do not spin the tires excessively. Tires ● When driving straight, shift the 4WD will sink deep into the mud, making it shift switch to the 2WD or 4H position. difficult to free the vehicle. Do not move the 4WD shift switch when making a turn or reversing.● Avoid shifting gears with the engine running at high speeds as this may ● Do not shift the 4WD shift switch while cause malfunction. driving on steep downhill grades. Use the engine brake and low automatic4WD shift switch operations transmission gears (D1 or D2) for en- gine braking. ● Do not operate the 4WD shift switch with the rear wheels spinning. WSD0102 ● Before placing the 4WD shift switch in ● Shift the 4WD shift switch to either the the 4H position from 2WD, ensure the 2WD, 4H or 4LO position, depending on vehicle speed is less than 62.5 MPH driving conditions. (100 km/h). Failure to do so can dam- age the 4WD system. ● If the 4WD shift switch is operated while making a turn, accelerating or ● Never shift the 4WD shift switch be- tween 4LO and 4H while driving. decelerating or if the key switch is turned off while in the 4H or 4LO, you 4WD shift indicator light may feel a jerk. This is not abnormal. ● When the vehicle is stopped after mak- ing a turn, you may feel a slight jolt after the selector lever is shifted to N or P. This occurs because the transfer clutch is released and not because of a malfunction. Starting and driving 5-23 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 214. drive the vehicle straight, accelerate or decelerate or move the vehicle in re- The transfer case verse, then shift the 4WD shift switch. Blinks rapidly oil temperature rises abnormally ● If the 4WD warning light comes on, the 4WD indicator light goes out. The difference in Blinks slowly wheel rotation is CAUTION large ● If the 4WD shift indicator light indica- tion changes to 2WD when the 4WD The 4WD warning light is located in the meter. shift switch is shifted to the 4H position at low ambient temperatures, the 2WD The 4WD warning light comes on when the key mode may be being engaged due to switch is turned to ON. It turns off soon after the malfunctioning drive system. If the indi- engine is started. LSD0094 cator does not return to normal and the 4WD warning light comes on, have the If any malfunction occurs in the 4WD systemThe 4WD shift indicator light is located in the when the key switch is ON, the warning light willodometer display. system checked by the nearest NISSAN dealer. either remain illuminated or blink.The light should turn off within 1 second after If the 4WD warning light comes on, the 4WDturning the ignition switch to the ON position. 4WD warning light shift indicator light goes out.While the engine is running, the 4WD shift indi- High-temperature transfer case oil makes thecator light will illuminate the position selected by warning light blink rapidly (about twice per sec-the 4WD shift switch. ond). If the warning light blinks rapidly during Comes on or blinks Warning light ● The 4WD shift indicator light may blink when: operation, stop the vehicle in a safe place imme- while shifting from one drive mode to diately. Then if the light goes off after a while, you the other. When the shifting is com- can continue driving. pleted, the 4WD shift indicator light There is a malfunc- will come on. If the indicator light does Comes on tion in the 4–wheel A large difference between the diameters of front drive system and rear wheels will make the warning light blink not come on immediately, make sure the area around the vehicle is safe, and5-24 Starting and driving ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 215. slowly (about once per two seconds). Change ● in the 4H position, shift the 4WD shiftthe 4WD shift switch into 2WD and do not drive switch to 2WD.fast. ● in the 4LO position, stop the vehicle, CAUTION move the automatic transmission shift selector lever to the N position● If the warning light comes on or blinks with the brake pedal depressed, and slowly during operation or rapidly after shift the 4WD shift switch to 2WD. stopping the vehicle for a while, have your vehicle checked by a NISSAN ● If the warning light is still on after the dealer as soon as possible. above operation, have your vehicle checked by a NISSAN dealer as soon as● Shifting between 4H and 4LO is not possible. recommended when the 4WD warning light turns on. ● The transfer case may be damaged if you continue driving with the warning● When the warning light comes on, the light blinking rapidly. 2WD mode may be engaged even if the 4WD shift switch is in 4H. Be especially careful when driving. If corresponding parts are malfunctioning, the 4WD mode will not be engaged even if the 4WD shift switch is shifted.● Do not drive the vehicle in the 4H or 4LO position on dry hard surface roads. Driv- ing on dry, hard surfaces in 4H or 4LO may cause unnecessary noise, tire wear and increased fuel consumption. If the 4WD warning light turns on when you are driving on dry hard surface roads: Starting and driving 5-25 ੬ REVIEW COPY:—2004 Titan (tzw) Owners Manual (owners)—USA English (nna) 09/11/03—debbie ੭
  • 216. PARKING/PARKING ON HILLS ● Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls. Unattended children could become involved in seri- ous accidents. 1. Firmly apply the parking brake. 2. Move the shift selector lever to the P (Park) position. 3. To help prevent the vehicle from rolling into traffic when parked on an incline, it is a good practice to turn the wheels as illustrated. ● HEADED DOWNHILL WITH CURB: ᭺ A WSD0050 Turn the wheels into the curb and move the vehicle forward until the curb side wheel ● Safe parking procedures require that gently touches the curb. WARNING both the parking brake be set and the ● HEADED UPHILL WITH CURB: ᭺ B● Do not stop or park the vehicle over transmission placed into P (Park). Fail- ure to do so could cause the vehicle to Turn the wheels away from the curb and flammable materials such as dry grass, move unexpectedly or roll away and re- move the vehicle back until the curb side waste paper or rags. They may ignite sult in an accident. Make sure the shift wheel gently touches the curb. and cause a fire. lever has been pushed as far forward as ● HEADED UPHILL OR DOWNHILL, NO it can go and cannot be moved without CURB: ᭺ C depressing the foot brake pedal. Turn the wheels toward the side of the ro