1. Accessories• G-lamp
• safety chain,
• gel frame
• adjustable arm
• 15 amp plug
• encased light bulb
• Beam angle- 24 degrees
ExplanationUsed for aesthetics and music gigs. You can also create a chase with them. They
are also used to add depth to general cover.
Compare & ContrastIf I was creating a chase for a music gig I would use a Parcan over a Profile or a
Birdie. I would choose a Parcan because it can create a chase, its aesthetic, it
has gel frames and it is mainly used for general cover. I wouldn't use a Profile
because it wont create general wash and it is mostly used for specials, like
gobos and iris’ and I wouldn't use a Birdie because it is too small and the light
isnt powerful enough.

2. Light
If there is no light, or the bulb is not working, all spare lights can be found at the back of the hall.
Safety chain
If you are hanging the light from the rig or the boom, the CCT must have a safety chain . Additional safety
chains are situated at the back of the hall.
G clamp
If you are putting the light in the rig, you will need a G clamp. Additional G clamps are situated at the back of
the hall.
Gel
If using colour you will need a gel. These can be found in the gel cabinet at the back of the hall. You should then
cut the gel to the required size
Gel Frame
If using colour you will require a gel frame which are hung on the wall at the back of the hall above the light
rack. Make sure your gel frame is the correct size for you light.

3. Accessories• G-lamp
• safety chain
• gel frame
• adjustable arm
• 15 amp plug
• Barn doors
• Adjustable knob
• Beam angle- 60 degrees
ExplanationUsed for general cover. Also can be used as a spot light if you are in desperate
need of a spot light because it is the closet thing to a spot light, because of its
pebble lens.
Compare & ContrastIf the Profiles are broken but I need to isolate an actor, I would use a PC over a
Selecon and a CCT. I would use a PC because the light has a defined edge and
so the actor would be more isolated and it also has the same lens as a profile
so it is the most similar. I wouldn't use a Selecon or a CCT because neither are
as defined as a PC.

4. Light
If there is no light, or the bulb is not working, all spare lights can be found at the back of the hall.
Safety chain
If you are hanging the light from the rig or the boom, the CCT must have a safety chain . Additional safety
chains are situated at the back of the hall.
G clamp
If you are putting the light in the rig, you will need a G clamp. Additional G clamps are situated at the back of
the hall.
Gel
If using colour you will need a gel. These can be found in the gel cabinet at the back of the hall. You should then
cut the gel to the required size
Gel Frame
If using colour you will require a gel frame which are hung on the wall at the back of the hall above the light
rack. Make sure your gel frame is the correct size for you light.
Barn Doors
If you need to isolate the light direction, you need barn doors. These can be found on the wall above the
lighting rack at the back of the hall.

5. Accessories• G-lamp
• safety chain,
• gel frame
• 15 amp plug
• Barn doors
•
•
•
•
Adjustable knob
Adjustable arm
Ridged circular lens
Beam angle- 35 degrees
ExplanationUsed for a general wash and can also be used to optimise things on stage
because of the barn doors.
Compare & ContrastIf I was using side light for a dance performance I would use a CCT over a
Pinspot or a Profile. I would use a CCT because it defuses light and it has barn
doors. I wouldnt use a Pinspot because it is generally used for lighting
glitterballs and it also isnt powerful enough for side light. I wouldnt use a
Profile because its too defined and wont create general wash.

6. Light
If there is no light, or the bulb is not working, all spare lights can be found at the back of the hall.
Safety chain
If you are hanging the light from the rig or the boom, the CCT must have a safety chain . Additional safety
chains are situated at the back of the hall.
G clamp
If you are putting the light in the rig, you will need a G clamp. Additional G clamps are situated at the back of
the hall.
Gel
If using colour you will need a gel. These can be found in the gel cabinet at the back of the hall. You should then
cut the gel to the required size
Gel Frame
If using colour you will require a gel frame which are hung on the wall at the back of the hall above the light
rack. Make sure your gel frame is the correct size for you light.
Barn Doors
If you need to isolate the light direction, you need barn doors. These can be found on the wall above the
lighting rack at the back of the hall.

7. Accessories• G-lamp
• safety chain
• 15 amp plug
• Barn doors
• Bigger than a CCT
• 2 adjustable knobs
• Beam angle- 6-60 degrees
ExplanationUsed for general cover, but can also be used to manipulate the light because of
the barn doors.
Compare & ContrastIf I was creating a general wash for a Christmas show I would use a Selecon
over a PC and a Parcan. I would use a Selecon because they are normally used
for general wash. I wouldn't use a Parcan because they are only used to add
depth and I wouldn't use a CT because they are too defined.

8. Light
If there is no light, or the bulb is not working, all spare lights can be found at the back of the hall.
G clamp
If you are putting the light in the rig, you will need a G clamp. Additional G clamps are situated at the back of
the hall.
Gel
If using colour you will need a gel. These can be found in the gel cabinet at the back of the hall. You should then
cut the gel to the required size
Gel Frame
If using colour you will require a gel frame which are hung on the wall at the back of the hall above the light
rack. Make sure your gel frame is the correct size for you light.
Barn Doors
If you need to isolate the light direction, you need barn doors. These can be found on the wall above the
lighting rack at the back of the hall.

9. Accessories• G-lamp
• safety chain
• 15 amp plug
• Barn doors
• Wire mesh
• Beam angle- 30 degrees
ExplanationUsed for backlight to help create definition of the actors. It is also used for
general wash.
Compare & ContrastIf I was creating backlight for a musical I would use a 1K over a Birdie or a
Profile. I would use a 1K because it defuses light and is used for general wash. I
wouldnt use a Birdie because its too small and is usually used for aesthetics. I
wouldnt use a Profile because its too defined and wouldnt create a general
wash.

10. Light
If there is no light, or the bulb is not working, all spare lights can be found at the back of the hall.
Safety chain
If you are hanging the light from the rig or the boom, the CCT must have a safety chain . Additional safety
chains are situated at the back of the hall.
G clamp
If you are putting the light in the rig, you will need a G clamp. Additional G clamps are situated at the back of
the hall.
Gel
If using colour you will need a gel. These can be found in the gel cabinet at the back of the hall. You should then
cut the gel to the required size
Gel Frame
If using colour you will require a gel frame which are hung on the wall at the back of the hall above the light
rack. Make sure your gel frame is the correct size for you light.
Barn Doors
If you need to isolate the light direction, you need barn doors. These can be found on the wall above the
lighting rack at the back of the hall.

11. Accessories• G-lamp
• safety chain
• 15 amp plug
• Shutters
• Gel frame
• Gobo
• Iris
• Beam angle- 25 degrees
ExplanationUsed for lighting a stage, but mainly used for highlighting objects and people on
the stage to make them stand out from everything else on the stage around
them.
Compare & ContrastIf I was trying to create a window effect for a set I would use a Minuette Profile
over a CCT or a Parcan. I would use a Profile because it isolates a spot and it
also has a gobo and shutters so it is easier to create and effect with them. I
wouldnt use a CCT because it is used for general wash and doesnt have a gobo
and I wouldnt use a Parcan because it cant define the spot as much.

12. Light
If there is no light, or the bulb is not working, all spare lights can be found at the back of the hall.
Safety chain
If you are hanging the light from the rig or the boom, the CCT must have a safety chain . Additional safety chains are
situated at the back of the hall.
G clamp
If you are putting the light in the rig, you will need a G clamp. Additional G clamps are situated at the back of the hall.
Gel
If using colour you will need a gel. These can be found in the gel cabinet at the back of the hall. You should then cut the
gel to the required size
Gel Frame
If using colour you will require a gel frame which are hung on the wall at the back of the hall above the light rack. Make
sure your gel frame is the correct size for you light.
Shutters
If you want to manipulate the light make sure there are 4 shutters. Shutters can be found at the back of the hall above
the lighting rack.
Gobo
If you want to add a pattern to your light you need to add a gobo and a gobo holder. Gobos can be found in Julies office
and gobo holders can be found at the back of the hall above the lighting rack.
Iris
In order to reduce the beam angle you can use an iris. These can be found above the lighting rack at the back of the
hall.

13. Accessories• G-lamp
• safety chain
• 15 amp plug
• Shutters
• Gel frame
• Gobo
• Iris
• Beam angle- 16 degrees
ExplanationUsed for lighting a space or highlighting people or objects on stage. Uses an
energy saving light bulb so the light is brighter and whiter than the one in a
Minuette Profile.
Compare & ContrastIf I was isolating an actor on stage I would use a Source Four over a Selecon or a
Flood. I would use a Source Four because it is a defined spot light and it is used
for isolating actors. I wouldn't use a Selecon because it is used for general cover
and has no defined edge. I wouldn't use a Flood because it is used for general
cover and cant direct light.

14. Light
If there is no light, or the bulb is not working, all spare lights can be found at the back of the hall.
Safety chain
If you are hanging the light from the rig or the boom, the CCT must have a safety chain . Additional safety chains are
situated at the back of the hall.
G clamp
If you are putting the light in the rig, you will need a G clamp. Additional G clamps are situated at the back of the hall.
Gel
If using colour you will need a gel. These can be found in the gel cabinet at the back of the hall. You should then cut the
gel to the required size
Gel Frame
If using colour you will require a gel frame which are hung on the wall at the back of the hall above the light rack. Make
sure your gel frame is the correct size for you light.
Shutters
If you want to manipulate the light make sure there are 4 shutters. Shutters can be found at the back of the hall above
the lighting rack.
Gobo
If you want to add a pattern to your light you need to add a gobo and a gobo holder. Gobos can be found in Julies office
and gobo holders can be found at the back of the hall above the lighting rack.
Iris
In order to reduce the beam angle you can use an iris. These can be found above the lighting rack at the back of the
hall.

15. Accessories• G-lamp
• safety chain
• 13 amp plug
• Gel frame
• Barn doors
• Beam angle- 15 degrees
ExplanationUsed in museums and exhibitions. Can also be used in truss’. Mainly used for
aesthetics and lighting the audience in performances.
Compare & ContrastIf I was lighting the audience I would use a Birdie over a Selecon or a Parcan. I
would use a Birdie because it is aesthetic and it doesnt produce much light so
no attention would be taken off the actors on stage once the audience was lit. I
wouldnt use a Selecon or a Parcan because they are too big and bright and
create too much general wash.

16. Light
If there is no light, or the bulb is not working, all spare lights can be found at the back of the hall.
G clamp
If you are putting the light in the rig, you will need a G clamp. Additional G clamps are situated at the back of
the hall.
Gel
If using colour you will need a gel. These can be found in the gel cabinet at the back of the hall. You should then
cut the gel to the required size
Gel Frame
If using colour you will require a gel frame which are hung on the wall at the back of the hall above the light
rack. Make sure your gel frame is the correct size for you light.
Barn Doors
If you need to isolate the light direction, you need barn doors. These can be found on the wall above the
lighting rack at the back of the hall.

17. Accessories• G-lamp
• safety chain
• 15 amp plug
• Beam angle- 12 degrees
ExplanationUsed for to light glitter balls or used in museums and exhibitions. You cant
change the colour but you can change the bulb.
Compare & ContrastIf a talent show required a glitter ball effect I would use a Pinspot over a Flood
or an LED Parcan. I would use a Pinspot because its main purpose is to light
glitter balls. I wouldn't use a Flood or an LED Parcan because it creates too
much general wash and you cant direct the light.

18. Light
If there is no light, or the bulb is not working, all spare lights can be found at the back of the hall.
Safety chain
If you are hanging the light from the rig or the boom, the CCT must have a safety chain . Additional safety
chains are situated at the back of the hall.
G clamp
If you are putting the light in the rig, you will need a G clamp. Additional G clamps are situated at the back of
the hall.
Colour bulb
If you want to change the colour you will need to change the bulb to the colour bulb you want. These can be
found in Julies office.

19. Accessories• G-lamp
• safety chain
• 15 amp plug
• Gel frame
• Beam angle- 60 degrees
ExplanationUsed for lighting a cyclorama mainly, but sometimes used to light the audience.
You cant direct the light on them.
Compare & ContrastIf I was lighting a cyclorama I would use a Flood over a Profile or a Birdie. I
would use a Flood because it creates a general wash and has a wider angle of
light. I wouldn't use a Profile because its too defined and is normally used for
specials and I wouldn't use a Birdie because it is too small and wouldn't
produce enough light.

20. Light
If there is no light, or the bulb is not working, all spare lights can be found at the back of the hall.
Safety chain
If you are hanging the light from the rig or the boom, the CCT must have a safety chain . Additional safety
chains are situated at the back of the hall.
G clamp
If you are putting the light in the rig, you will need a G clamp. Additional G clamps are situated at the back of
the hall.
Gel
If using colour you will need a gel. These can be found in the gel cabinet at the back of the hall. You should then
cut the gel to the required size
Gel Frame
If using colour you will require a gel frame which are hung on the wall at the back of the hall above the light
rack. Make sure your gel frame is the correct size for you light.
Base
If you want to place the light on the floor, you will need a base. These are situated on the shelf at the back of
the hall. (please note you will also require a bolt which can be found in the drawer at the back of the hall.)

21. Accessories• G-lamp
• safety chain
• 15 amp plug
• Beam angle- 18 degrees
ExplanationUsed for general wash, but the colour can be changed from the desk so you
don't need a gel.
Compare & ContrastIf I wanted to provide multiple colouring allowing the mood of the scenen to
change I would pick an LED parcan over a Flood or a Parcan. I would use and
LED Parcan because it has the 3 primary colours built into it and it can be
changed by the desk. I wouldnt use a Parcan because its only used to create
depth and I wouldnt use a Flood because the colour can only be changed by
changing the gel.

22. Light
If there is no light, or the bulb is not working, all spare lights can be found at the back of the hall.
Safety chain
If you are hanging the light from the rig or the boom, the CCT must have a safety chain . Additional safety chains are
situated at the back of the hall.
G clamp
If you are putting the light in the rig, you will need a G clamp. Additional G clamps are situated at the back of the hall.
Gel
If using colour you will need a gel. These can be found in the gel cabinet at the back of the hall. You should then cut the
gel to the required size
Gel Frame
If using colour you will require a gel frame which are hung on the wall at the back of the hall above the light rack. Make
sure your gel frame is the correct size for you light.
Barn Doors
If you need to isolate the light direction, you need barn doors. These can be found on the wall above the lighting rack at
the back of the hall.
Base
If you want to place the light on the floor, you will need a base. These are situated on the shelf at the back of the hall.
(please note you will also require a bolt which can be found in the drawer at the back of the hall.)
DMX cable
As the colour of the light can be changed via the desk, you will need to connect a DMX cable to the LED Par, if you wish
to control the light from the desk. These are situated in Julies office.