(installed on the machine) This software expansion makes it possible to shape small blocks with "comb-type" proc...
1BF203502  Counter-table Mod. 1BF/20-35 Wood-panelled counter-table to be placed on the bridge saw worktable in order to l...
Accessories FRGMS14A00   Second worktable conforming to CE standards   (same as the standard table) made from arc-welded s...
Accessories SADBC    Bar code manual reader   with automatic transmission of the working program to the machine  .
FECOP1A00   Optoelectronic copying device of drawings This accessory allows to sense a drawing which is then stored by the...
FOTO2035    Slab scanning system with digital camera Accessories The system includes hardware and software for the scannin...
FKPAIL    Inclined slab support top Inclined slab support top, outside the machine   Accessories
OFFMACCAM     Software licence to be installed on a PC of the  customer linked with the machine through Ethernet net; this...
STPCST    PC station + printer of labels with bar code The PC, with the colour monitor and printer, is housed in a sheet m...
STIJ    Printer of labels with bar code Printer of labels with bar code, linked with the computer numerical control (CNC) ...
BSCAMSAWA00  Bretonsmartcam SAW Accessories Software for the CAD/CAM programming of sawing centres with 3 interpolated   a...
 
Upcoming SlideShare
Loading in...5
×

SPEEDYCUT FK/NC 1400 - ACCESSORIES

664

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
664
On Slideshare
0
From Embeds
0
Number of Embeds
4
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "SPEEDYCUT FK/NC 1400 - ACCESSORIES"

  1. 1. (installed on the machine) This software expansion makes it possible to shape small blocks with "comb-type" process, either vertical or horizontal, using the diamond saw blade. The shape of the profile to be produced is defined using a simplified CAD supplied with the machine, or it may be imported (DXF) from another computer. Both the form of the small blocks to be shaped and the machining are displayed on the machine monitor. The interpolated axes of the machine enable to obtain surfaces which can be even very elaborate. The different profiles can be stored in a database and recalled at will. Accessories GESTSWFR01 Software package Mod. GEST/PROF for the generation of simple profiles on small blocks
  2. 2. 1BF203502 Counter-table Mod. 1BF/20-35 Wood-panelled counter-table to be placed on the bridge saw worktable in order to load the slabs arranged in a pile while the machine is operating. It is advisable to purchase two counter-tables (when purchasing them, the worktable of the machine is supplied without wood-panelling). Accessories
  3. 3. Accessories FRGMS14A00 Second worktable conforming to CE standards (same as the standard table) made from arc-welded steel and provided with shelves and motorized rotation driven by an inverter-controlled motor. The table can be pneumatically locked in any position. The supply includes an additional set of bridge guide runners, the extension of the bridge cable-holding chain and the other components required for working with the double table.
  4. 4. Accessories SADBC Bar code manual reader with automatic transmission of the working program to the machine .
  5. 5. FECOP1A00 Optoelectronic copying device of drawings This accessory allows to sense a drawing which is then stored by the NC and can be used time and again. Accessories
  6. 6. FOTO2035 Slab scanning system with digital camera Accessories The system includes hardware and software for the scanning of the slab image which is displayed on the 15-inch touch-screen colour video. The operator marks the slab outline and the contour of any possible surface defect with the mouse. So defined profile and defects will be the basis for both the optimization of the slab and the programming of cuts while the machine is working. The digital camera is installed on a special support. N.B. The "slab support top" accessory must be purchased if there is no conveyor supporting the slab. N.B. In order to create the ideal environment for taking digital photographs, the arrangement of the correct light intensity in the area of the camera, the removal of any possible luminous interference as well as the removal of all patches of shade and environmental reflections, shall be at the customer’s care and expense.
  7. 7. FKPAIL Inclined slab support top Inclined slab support top, outside the machine Accessories
  8. 8. OFFMACCAM Software licence to be installed on a PC of the customer linked with the machine through Ethernet net; this software enables the drawing, the import of pieces to be realized from DXF format, the automatic optimization of the piece positioning inside the slabs to be machined (which are sensed by the operator using the FOTO2035 accessory, not included in the price) and the realization of the relevant production programs. Accessories
  9. 9. STPCST PC station + printer of labels with bar code The PC, with the colour monitor and printer, is housed in a sheet metal cabinet, while the keyboard and mouse are placed on the bolster, under the monitor. Labels must be glued manually to the pieces Accessories
  10. 10. STIJ Printer of labels with bar code Printer of labels with bar code, linked with the computer numerical control (CNC) of the machines. Labels are to be manually glued on the pieces. Accessories
  11. 11. BSCAMSAWA00 Bretonsmartcam SAW Accessories Software for the CAD/CAM programming of sawing centres with 3 interpolated axes. CAD/CAM software to draw and machine complex stone workpieces, allowing to carry out the following major functions: - cutting of slabs with saw blade - shaping, profiling, scabbling, trimming and dishing out of small blocks with saw blade - engraving of Windows "True Type" letters with millers - dishing out and drilling with ball end two-fluted mills The software operates in a Windows environment, is easy-to-understand and user-friendly thanks to the programming on 3 interpolated and 2 positioned axes. It is provided with a 2D CAD that allows to: - realize any 2D drawing with relevant dimensions - define the piece tridimensional volume of work - define any plane within the generated piece tridimensional volume of work - manage the 2D drawing realized on the selected working plane, however it is oriented in the space - import drawings in .DXF and .DWG format from external CAD or template sensors - place the pieces to be realized directly on the slab to be machined, so as to utilize its surface at most It is also provided with a 3D simulator enabling to: - simulate the real machining program generated by the CAM in ISO language on the virtual model of the machine with all its accessories and equipment - verify the correct execution of the machining and trace any possible jamming between tool, piece and fastening equipment The supply includes nr. 2 training days .

×