WPINC250 Spindle inclination from 0 to +3° The spindle positioning and the hydraulic locking in the correct position are performed automatically as per the work cycle pre-set programme, while the desired inclination is selected activating manually the adjuster installed next to the spindle unit. Accessories

WP4AM260DTA00 4 th C-axis for the continuous interpolated cut using a saw blade; this accessory makes it possible to use the cutting units holding a diamond saw blade and includes the prearrangement of the tool-store so as to accommodate a 90° or 60° head; provided with a stainless steel guard with pneumatic opening . Accessories

WPTI90 90° head For executing straight cuts using a saw blade (to be used together with the accessory WP4AM260A00). N.B. When installed on the tool-store in order to be used automatically, this unit occupies 2 positions in the tool-store . Accessories

WPTI60 60° head To execute circular cuts using a convex blade (to be used together with the accessory WP4AM260A00); N.B. When installed on the tool-store in order to be used automatically, this unit occupies 2 positions in the tool-store. Accessories

WPTI45 45 ° head For executing 45° inclined cuts using a saw blade (to be used together with the accessory WP4AM260A00). N.B. When installed on the tool-store in order to be used automatically, this unit occupies 2 positions in the tool-store . Accessories

WPGLLPUA00 Laser sensor To control both the tool profile and the tool diameter and length, complete with software and installed on a corner of the work-table. N.B. The installation of this unit reduces the work area next to the laser by a triangle of 150x150 mm . Accessories

NCTDG250 Graphic digitising unit Of 1.200x2.200 mm and complete with interface software . Accessories

NCTDG Graphic digitising unit Of 1.500x4.000 mm and complete with interface software . Accessories

SADBC Manual reader Of the piece bar codes, with automatic transmission of the working program to the machine . Accessories

TAVPX260K… Work-table plating with a continuous top made from a special aluminium alloy replacing the standard top) for using double-effect suction cups. (for NC 260K15 - 260K18 - 260K23 - 260K37) Accessories

MINICAD CAD Light software (Autocad Light) Use the graphic digitising unit if the latter is installed in a place other than that where the PC with the BretonCam is used. N.B. The customer must purchase a PC to be linked to the graphic digitising unit and take care of transferring the data to the PC where the BretonCam is installed (floppy, USB key, net, etc.). Accessories

SETVMARS150 Set of suction cups (H=150mm) with mechanically-locked support , complete with brackets and composed of: n. 2 rectangular suction cups of 70x40 mm n. 4 circular suction cups ø 150 mm n. 6 rectangular suction cups of 300x75 mm n. 6 rectangular suction cups of 300x150 mm n. 36 brackets to lock the suction cups n. 1 kit of gaskets, connectors and small spare parts Accessories

LPVNC250 Laser to position the suction cups The laser projector is fixed to a tool-holding coupling and housed in the tool-store . Accessories

LPVNCSTF Laser projection system for NC machine equipped with fixed single-table, including: – laser projector with green light to draw both the shapes of the pieces to be processed and the suction cups to be positioned – structure to support the laser (overall height: 5.000 mm) – software controlling the projector (it is possible to read files in DXF format as well . Accessories

WPTARM Sensor with radio transmission used to measure the pieces under production transmitting by radio the position ("X", "Y" and "Z" co-ordinates) of the measured piece. Accessories

BSCAMMILLA00 Bretonsmartcam MILL Software CAD/CAM per il disegno e l’esecuzione di particolari complessi in materiale lapideo, che consente di eseguire le seguenti principali lavorazioni: - taglio e sagomatura con disco - contornatura, profilatura, foratura, fresatura, svuotatura con utensili fresa o sagomati - lucidatura di piani anche inclinati - fresatura e lucidatura di scanalature su piani anche inclinati - incisione di caratteri True Type di Windows - bassorilievi importati da superfici digitalizzate Il software funziona in ambiente Windows, è intuitivo e di facile utilizzo. È dotato di macro parametriche che permettono di: - eseguire in modo semplificato disegni partendo da modelli standardizzati parametrici. È inoltre dotato di CAD 2D che permette di: - realizzare qualsiasi disegno bidimensionale con relativa quotatura - importare disegni in formato .DXF e .DWG provenienti da CAD esterni o da rilevatori di templates - posizionare i pezzi da realizzare direttamente sulla lastra da lavorare per sfruttare in modo ottimale la superficie - programmare in automatico e visualizzare la disposizione delle ventose sul banco di lavoro - interfacciarsi con il software dell’eventuale proiettore laser per la disposizione delle ventose sul banco di lavoro - interfacciarsi con il software dell’eventuale digitalizzatore di bassorilievi È inoltre dotato di un simulatore 3D che permette di: - simulare sul modello virtuale della macchina, comprensiva di tutti i suoi accessori ed attrezzature, il reale programma di lavorazione generato dal CAM in linguaggio ISO - verificare la corretta esecuzione della lavorazione e rilevare eventuali interferenze tra utensile, pezzo ed attrezzature di fissaggio. Accessories

NCCL Optical system for the reading and 3D scanning of the piece shape, composed of laser head and control software . Accessories

NC0709TFR Special head to execute pockets having a constant depth with respect to the slab polished face, so as to create the recess needed to fix stainless steel sinks at the same level of the top polished surface; it is prearranged to work using small diameter mills . Accessories

WPFI90 90° milling unit Head for the 90° machining, used to realize engravings or milling works on the billet side . Accessories

SETVMARSDE150 Set of double-effect suction cups (H=150 mm) composed of: n. 2 rectangular suction cups of 70x40 mm n. 4 circular suction cups ø 150 mm n. 6 rectangular suction cups of 300x75 mm n. 6 rectangular suction cups of 300x150 mm n. 1 kit of gaskets, connectors and small spare parts Accessories

SETVMARSB150 Set of Blick suction cups (H=150 mm) with mechanically locked support, complete with brackets and composed of : n. 4 rectangular suction cups of 150x150 mm n. 6 rectangular suction cups of 75x300 mm n. 6 rectangular suction cups of 150x300 mm n. 2 rectangular suction cups of 40x100x300 mm n. 12 reference guides n. 36 brackets to lock the suction cups Accessories

SETVMARSBDE150 Set of Blick double-effect suction cups (H=150 mm) composed of : n. 4 rectangular suction cups of 150x150 mm n. 6 rectangular suction cups of 75x300 mm n. 6 rectangular suction cups of 150x300 mm n. 2 rectangular suction cups of 40x100x300 mm n. 12 reference guides Accessories

WPTI90CAN 90° head supplied provided with internal circulation of the cooling water, for the execution and polishing of the drainage gutters on kitchen tops by means of circular diamond and resinoid tools. N.B. If this unit is installed on the tool-store, it fills two positions. If this unit is purchased, it is necessary to purchase also the WP4AM260A00 accessory. Accessories

NCHSKMPA Double tool-holding Double tool-holding for to use two overlapped tools for profiles with thickness up to 3cm. Accessories

WPTFM50 Transformer Foro functional connection scheme different than the one. Accessories

Accessories