Custom Intergration Product Guide 2009

1,261
-1

Published on

This is Audio Authority's complete custom integration product guide.

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
1,261
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
20
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Custom Intergration Product Guide 2009

  1. 1. Low Resolution Integration Product Guide Guide Custom Custom Integration Product Use High Resolution PDF File for Printing EXPERT AUDIO / VIDEO SOLUTIONS SINCE 1976
  2. 2. Cat 5 Video/Audio Matrix Distribution AVAtrix™ HD Home Theater Matrix Routing System AVX-562 • AVAtrix HDTV Cat 5 Matrix (wallplate/receivers sold separately) 6-input, 6-output, whole-house Cat 5-based matrix system, exceptional for high definition signal distribution. The AVAtrix handles component video resolutions up to 1080p, plus analog Focus and digital audio, and can send the signals up to 1,000 feet over Cat 5 cabling. Control is via Sheet IR, RS-232, or touch-sensitive front panel. The AVX-562 does not include wallplate/receivers. Model 1192 rack ears included. 1176BK • HD Cat 5 Matrix Router Expander The Cat 5 Router expands an AVAtrix system to allow six more matrix outputs. Adds onto the Focus existing AVAtrix stack. Connects via internal system bus cable. Model 1191 rack ears included. Sheet 1172BK • AVAtrix Audio Breakout Adapter Allows the easy connection of whole-house audio amplifier components. Tracking mode outputs the audio from what a particular zone is viewing, while Source mode duplicates the source audio Focus outputs for interfacing with a whole house audio amplifier matrix. Connects via internal system Sheet bus cable. Model 1191 rack ears included. 1109 • IR Injector Allows IR control signals to be sent from an IR device near the AVAtrix out to IR emitters Focus connected to wallplate IR jacks. Connections for up to six wallplate/receivers. Sheet 1105BK • Infrared Remote Control (for AVAtrix and 1156/66) The 1105BK operates the AVX-562 and is backwards compatible with AVX-561 and AVX-661. Web Link 802-567 / 802-568 • Bus Cables (for AVAtrix and SixDrive, 4 or 7 port) System bus cables for AVAtrix expanders. The AVX-562 ships with a 802-567 which has two Web open expander ports available. The seven port 802-567 cable allows installation of up to five Link 1170, 1172, and/or 1176 expanders on the AVAtrix. Cat 5 Wallplate/Receivers For use with AVAtrix, Sixdrive, DuoDrive, and Unidrive 9878 • HDTV Wallplate/Receiver (dual-gang, YPbPr, digital/analog audio) Audio Authority’s first of its kind active Cat 5 wallplate has been imitated, but never duplicated. This two-gang plate takes two Cat 5e RJ-45 inputs, and offers component video, analog audio, Focus digital coax audio, and an IR pathway. Powered from the Cat 5 bus, so it doesn’t require Sheet unsightly external power adapters. Also includes an RF pass-through for antenna connections (separate coax required). 9879 • HDTV Wallplate/Receiver (single-gang, Decora®, YPbPr, digital/analog audio) Focus The second generation of Cat 5 wallplate from Audio Authority – the 9879 offers the same signal Sheet pathways as the 9878, but fits it all into a single-gang, Decora-style wall plate. Includes three colors of Decora inserts: white, ivory, and almond. Does not include an RF pass-through. 9880 • HDTV Enclosed Cat 5 Receiver (YPbPr, digital/analog audio) Perfect for situations where a wall plate form factor is not practical, the 9880 delivers the same signals as the 9878 and 9879, but in a self-contained, metal box form. Perfect for digital signage, Focus Sheet wall-mounted displays, and other unique applications. Does not include an RF pass-through.
  3. 3. Cat 5 Video/Audio Single Source Distribution AVM-71D • SixDrive™ Cat 5 Single-Source MultiDriver (includes six 9879 wallplates) Distribute HDTV to multiple areas over two Cat 5 cables with the SixDrive. Expandable in Focus increments of six outputs. Handles resolutions up to 1080p. One input, six outputs of HD Sheet Component Video, Analog Audio, and Digital Audio. IR pathway for control. Model 1191 rack ears included. Not for use with AVAtrix systems. 9870 • DuoDrive™ Signal Distribution System (includes two 9878 wallplate/receivers) Distribute HDTV signals to multiple rooms with our Model 9870 Cat 5 HD signal distribution Focus system. Each 9870 serves two remote locations. The 9870 is expandable in increments of two Sheet outputs. Also provides an IR pathway for incoming or outgoing IR control. AVP-11 • UniDrive™ Cat 5 HDTV Point-to-Point Extender Transmit HDTV signals over Cat 5 to a destination up to 1,000 feet away from the source with our point-to-point UniDrive Cat 5 HD system. The AVP-11 carries component video, analog audio, and Focus digital audio signals, and includes a three-wire pathway for IR control. Compatible with Audio Sheet Authority Cat 5 wallplate/receivers. Also available with 9879 Decora style receiver (AVP-11D). HDP-11 • Cat 5 HDMI Ultra Long-Range Extender Transmits HDMI signals over Cat 5e/6 cables up to 450 feet, supporting 1080p and embedded Focus stereo audio. Adjustable gain and EQ for maximum picture quality over long distances. Two Cat Sheet 5e/6 cables are suggested, but only one cable may be required in many installations. EDP-11 • Cat 5 HDMI Extender This all-digital extender transmits HDMI signals over Cat 5e/6 cables up to 150 feet, supporting Focus HDMI 1.3 features including 1080p, 36 bit Deep Color, and lossless audio. Sheet 1171BK • Cat 5 Single-Source MultiDriver (six outputs, wallplate/receivers not included) Distribute HDTV to multiple rooms over Cat 5 cable with our Model 1171BK Cat 5 HD signal Focus distribution system. Each 1171 serves Cat 5 wallplates in six remote locations. Expandable in Sheet increments of six. Not for use with AVAtrix systems. Model 1191 rack ears included. 1170BK • Cat 5 MultiDriver Expander (six outputs, wallplate/receivers not included) Expander for 1171-based systems, such as the AVM-71. Adds six additional outputs to Model Focus 1166, 1156, or 1171. The Model 1170 Cat 5 outputs deliver identical audio and video to Cat 5 Sheet wallplates in six remote locations. Model 1191 rack ears included. 802-567 / 802-568 • Bus Cables (for AVAtrix and SixDrive, 4 or 7 port) System bus cables for AVAtrix and SixDrive products. The four port 802-567 allows installation of Web three Model 1170 expanders on the 1171. The seven port 802-568 allows six 1170 expanders. Link 9871 • Cat 5 HD Signal Distribution Driver (does not include Cat 5 wallplate/receivers) The Model 9871 is a Cat 5 distribution driver. Used with compatible Audio Authority Cat 5 Focus receivers, it can transmit high definition component video, analog audio, and digital audio up to Sheet 1,000 feet from the source. Also provides an IR pathway for incoming or outgoing IR control. 9880T • Cat 5 Transmitter (requires one 9878, 9879, or 9880 receiver, sold separately) The 9880T is a single-output Cat 5 Driver for use with Audio Authority Cat 5 wallplate/receivers. Focus Transmits one component video, analog audio, and digital audio source up to 1,000 feet to a Sheet compatible Cat 5 receiver; a perfect solution for one source-to-one-display applications.
  4. 4. Distribution Amplifiers (HDMI , DVI, Component Video) ™ HDMI™ Distribution Amplifiers and Extenders 1392A / 1394A / 1398A • 1-in, 2/4/8-out HDMI™ v1.3 Distribution Amp/Splitters Audio Authority’s HDMI distribution amplifiers are perfect for showroom demonstration of HDMI sources and displays, or for custom integration. Fully HDCP compliant, ATC tested and certified for Focus Sheet full HDMI compliance. Support high bit-rate audio, lip-sync compensation, CEC, and 12-bit deep color. These “splitters” handle resolutions up to 1080p/60. Two, four, or eight outputs. Model 1398 is rack mountable via Model 1321RM rack ears, sold separately. 1391A • HDMI™ ver. 1.3 EQ/Extender The 1391A HDMI Extender allows HDMI signals to be transmitted up to 40 meters or more (about 130 feet) without signal loss or degradation. This extender features a DDC correction circuit that Focus Sheet prevents corruption of the low-speed data bus in an HDMI transmission - one of the major causes of HDCP handshake problems. DVI Distribution Amplifiers and Extenders 1352 • 1-in, 2-out DVI Distribution Amp / Splitter This DVI distribution amplifier is exceptional for “splitting” signals to multiple display devices. Web Link Fully HDCP compliant. 1351 • DVI Repeater DVI signals are inherently difficult to run over long distances – the DVI repeater can add fifty or Web more feet to your cable run without signal degradation. Link Component Video Distribution Amplifiers 1185ci • 1-in, 4-out YPbPr or RGBHV Distribution Amp / Splitter This distribution amplifier splits HD component video (up to 1080p), analog audio, digital coax, and digital optical audio from one input to four outputs. Perfect for custom integration into Focus Sheet a business or home, this high bandwidth amplifier also features an RGBHV mode, making it perhaps the most versatile amplifier on the market today. Cross-converts digital audio formats. Switchers (HDMI™, DVI) Digial Video Switchers 1374A • 4-in, 1-out HDMI™ ver. 1.3 Switcher with HDCP, IR Remote These HDMI switchers have been optimized for the best in compatibility and reliability through Focus extensive in-field testing. Discrete input selections, IR and RS-232 control capabilities, and full Sheet HDCP compliance highlight these switchers. Built-in equalization for longer cable runs. ATC tested and certified for full HDMI compliance. 1332 / 1334 • 2-in/4-in, 1-out DVI-D Switcher with HDCP, IR Remote These DVI switchers are excellent for any DVI-D switching application, and handle resolutions Web Link up to 1080p/60. Digital readout shows selected input. Control via IR remote or front panel toggle.
  5. 5. Switchers (Component Video, Audio) Component Video Switchers 1154B • 4-in, 1-out with AutoSelect™ and IR remote Audio Authority’s premiere 4-in, 1-out component video switcher also switches analog audio, digital optical, and digital coaxial audio. Includes automatic cross-conversion between digital Focus audio formats, outputting both. Defeatable AutoSelection logic selects the active source. All- Sheet metal construction, discrete input selection, touch-sensitive front panel, IR remote included. 1154A • 4-in, 1-out with AutoSelect™ The legendary 1154A component video AutoSelector also switches analog audio, digital optical, and digital coaxial audio. AutoSelection logic selects the active input. Control via front panel Focus toggle button or AutoSelection. Sheet Digital Audio Switchers 1177A • 4-in, 1-out Digital Audio Switcher with AutoSelect™ This 4-in, 1-out digital audio AutoSelector automatically selects the active digital audio source. Focus Handles digital coaxial and digital optical audio, and cross-converts between the two formats. Sheet Control via front panel toggle button or AutoSelection. Interface Devices and Adapters (Video, Audio) Video Converters/Scalers 9A60 • VGA to Component Video Transcoder Audio Authority’s first product made for the home is still relevant today – this VGA to component converter converts from RGB to YPbPr colorspace without signal degradation. It does not change Focus timing or resolution. The 9A60 may be incompatible with some laptop PCs, and may require Sheet additional software (not included) and/or changes to video card settings. 1385 • VGA to HDMI Scaler Computer video (VGA) to HDMI video HDTV scaler with audio in/out. Ultra compact, high performance scaler ideal for connecting computer VGA video output signals to HDMI inputs on Focus Sheet video displays. Recommended for laptop computer applications - no third party software required. 1365 • RGB to YPbPr / YPbPr to RGB Scaler Perfect for converting PC (VGA) outputs to component video. The 1365 accepts a wide range Focus of common computer resolutions, and the onboard video processor cross-converts the input Sheet to 480p, 720p, or 1080i output for easy compatibility with consumer television displays. 1362 • Composite / S-Video to YPbPr / RGB Converter Upconverting from composite or S-Video to component video has never been easier. The 1362 Focus converts to either YPbPr or RGB output. An onscreen menu overlay assists in setup. Sheet 1361 • YPbPr / RGB to Composite / S-Video Converter A high-quality, feature-laden, component video downconverter, the 1361 is excellent for Focus converting standard definition or HD component video signals to S-Video or composite output. Sheet 9A65 • Component Video to RGB Converter This component video to VGA converter is rated for resolutions up to 480p, and converts from Web Link YPbPr colorspace to RGB. Not recommended for use with high definition signals.
  6. 6. Audio Converters 977TPO • Digital Coaxial to Digital Optical Converter This high quality converter can convert even the highest bitrate digital coaxial signals to digital Focus Sheet optical audio. Accept no substitutes – this Audio Authority piece works every time. 977RPO • Digital Optical to Digital Coaxial Converter This high quality converter can convert even the highest bitrate digital optical signals to digital Focus coaxial audio. Accept no substitutes – this Audio Authority piece works every time. Sheet 979T • Analog to Digital Audio Converter Converts analog audio signals to digital coaxial or digital optical audio. The 979T is a high qual- ity ADC (Analog to Digital Converter), allowing for simple audio signal conversion with no degra- Focus dation, and supporting variable sampling rates for maximum fidelity. Output is 2.0 channel PCM Sheet at 48KHz or optional 96KHz sampling rates. 979R • Digital to Analog Audio Converter Converts digital coaxial or digital optical audio signals to analog L/R audio. The 979R is a high- quality DAC (Digital to Analog Converter), allowing for simple audio signal conversion with no Focus Sheet degradation, and supporting variable sampling rates for maximum fidelity. Accepts 2.0 channel PCM inputs at sampling rates from 44.1KHz to 192KHz. Other Interface Adapters 1182 • Passive Video DC Blocker Some video sources leak DC voltage onto their component video outputs – this can interfere with the picture data, causing a poor image. This DC blocker maintains the original picture Focus Sheet quality while removing the DC interference. 1183 • Active Video DC Blocker Some video sources leak DC voltage onto their component video outputs, and also cause problems with 75 ohm termination. This DC blocker removes the DC problem and provides Focus Sheet 75 ohm termination without degrading performance. 1184 • Active Signal Hum Eliminator Eliminates video and audio hum caused by AC-line noise due to ground loops in coaxial cabling. Active circuitry isolates the input and output grounds, so the bandwidth is not Focus limited by inductance, and the 1184 is not lossy as is the case with passive transformers. The Sheet 1184 strips DC from component or RGB video, and clamps black level to 0 volts. C-1024A • IR Converter for Bose® LifeStyle® and MRI Systems One-of-a-kind converter allows a standard learning IR remote to communicate with the RF-only Bose Lifestyle 20, 25, 30, 40, 50 systems. Converts IR commands from Harmony and Philips Focus Sheet Pronto® remotes to Bose serial commands. Includes a surface mount IR receiver. The words “Audio Authority” in any font, the Audio Authority logo, and the Double-A Symbol, are registered trademarks of Audio Authority Corporation. AVAtrix, SixDrive, and DuoDrive, are trademarks of Audio Authority® Corporation. Bose and LifeStyle are trademarks of Bose Corporation. Decora is a registered trademark of Leviton Manufacturing Company, Inc. Pronto is a trademark of Koninklijke Philips Electronics N.V. Dolby is a trademark of Dolby Laboratories, Incorporated. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Toslink is a trademark of Toshiba America. 2048 Mercer Road, Lexington, KY 40511-1071 USA Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 www.audioauthority.com 8/08
  7. 7. Back High Definition Cat 5 Matrix Model AVX-562
  8. 8. Back The Revolutionary Cat 5 Video & Audio Distribution System HD Matrix Signal Distribution AVX-562 FEATURES: The AVAtrix Model AVX-562 is an HD matrix that • Six inputs and six Cat 5e/6 remote outputs in one unit delivers component video, digital audio and stereo audio • Any source may be routed to any remote output signals for distributed video and home theater systems. • Expandable to up to 36 remote Cat 5 outputs Any of six sources may be routed to multiple remote wallplates or to the main output at any time. Each of the • Loss-free signal distribution up to 1,000 feet over Cat 5 AVX-562’s outputs is terminated at a wallplate/receiver • High bandwidth component video up to 1080p which provides a connection point for component video, • Cat 5 receivers provide YPbPr plus digital & analog audio digital audio, and stereo analog audio. Audio Authority’s • Cat 5 bus delivers power for wallplate/receivers innovative balanced line architecture, along with our • Pathway for IR control signals through Cat 5 bus Active Gain Equalization (AGE) technology, allows the • IR routing system for discrete source control built in signal to be transmitted up to 1,000 feet while preserving • IR remote control and rack mount ears included high definition signal clarity and vibrancy. Cat 5 Wallplate Receivers DISCRETE IR OUTPUTS AVX-562 Rear Detail Audio and video signals are carried on two SIX SOURCE INPUTS Cat 5 cables to each wallplate/receiver. The wallplates are powered from the head end SIX CAT 5 OUTPUTS PC FLASH PORT over Cat 5 – no power connection required IR CONTROL INPUT at the zone. A return pathway for IR signals is included in the Cat 5 cable run. This pathway allows the AVAtrix to be remotely RS-232 CONTROL controlled via IR, and it also delivers discrete IR control signals MAIN IR OUTPUT to the sources. Custom Options The Model AVX-562 is easy to install right out of the box with virtually no setup or assembly required for basic installations. The system is loaded with all the features and options needed for complex installations as well. It ships with its own IR remote control, and the AVAtrix IR and RS-232 control codes are available for download from Audio Authority as well as several remote control companies. Each source input can be given a custom name that is displayed on the fluorescent display. A flash memory slot allows easy firmware upgrades and provides a way for installers to quickly perform setup tasks using a PC for configuration.
  9. 9. Back The Perfect HDTV Distribution Solution SYSTEM DETAILS: The AVX-562 is your ticket to quicker, simpler, headache- AVX-562 Contents (1) HD Cat 5 Matrix with IR routing (1) 1105 IR remote control free installations. Two Cat 5 cables are all you need—they (1) Internal bus cable (with two open ports) do the work of six coaxial cable runs plus provide an IR (1) 18V DC power adapter pathway for source control. Balanced line technology (2) Rack ears allows for superior noise rejection and excellent picture Cat 5 Receiver Options 9878 dual-gang stainless steel wallplate quality. The AVX-562 is perfectly suited for home use, (Purchased separately) 9879 single-gang Decora® style wallplate restaurant television distribution, digital signage, even retail 9880 enclosed breakout box receiver demonstrations of HDTV. Inputs / Outputs YPbPr, digital audio and stereo analog audio Control Methods Front panel controls Front panel IR IR input on rear panel RS-232 connection on rear panel IR receivers installed at remote Cat 5 receivers VIDEO AND AUDIO SIGNAL FLOW Source and TV Connections • YPbPr component video • Optical digital audio (source only) • Coaxial digital audio • L/R analog audio Cat 5 Bus LOCAL • YPbPr component video • Coaxial digital audio • L/R analog audio AVX-562 SPECIFICATIONS: Video Signal Type: YPbPr component video Analog Audio: Left and right stereo Video Formats: 480i/p, 540i/p, 720p, 1080i/p Digital Audio: Multi-channel digital Video Input/Output Impedance: 75 ohms Digital Input/Output Optical & coaxial in/out Video Input Ground Isolation: No Audio Input Impedance 75 ohms/ 50K ohms Video Gain: 1 Audio Frequency Response 10-50KHz Video Gain Accuracy: 2% Audio S/N Ratio 72dB Video 3dB Bandwidth: 100MHz Audio THD & Noise 0.03% Video Input Coupling AC Size (H x W x D): 3.5” x 16.5” x 9.6” Video S/N Ratio: 61dB Warranty: One year, parts and labor Max Video Gain/Equalization 1 Agency Approvals FCC, CE
  10. 10. Expand and Extend the AVAtrix Back Add Remote Zones The 1176 HD Cat 5 Matrix Router expands an AVAtrix system to allow six additional matrix outputs. Add up to five 1176s to the AVX-562 to increase the total outputs to 36 remote locations. Connects via internal system bus cable and four jack screws. Interface with an Audio Distribution System The 1172 Audio Interface is a breakout adapter that allows the easy connection of whole-house audio amplifier components. It provides digital and analog audio to independent audio systems with integrated switching or systems with dedicated zone amplifiers. Connects via internal system bus cable and four jack screws. Bus Cable for Adding More than Two Expanders The AVAtrix has an internal ribbon bus cable that allows for two expanders (802-567). If you plan to add three to five expanders, the seven-port 802-568 bus cable is required. Send IR Signals to or from the Head End The 1109 IR Injector allows IR control signals to be sent from a device near the AVAtrix out to IR emitters connected to wallplate/receiver jacks. Connections for up to six wallplate/receivers with each pathway operating Any Source, independently to enable a mix of incoming and outgoing IR signals. Requires Any Display, no power source. Any Time. 2048 Mercer Road, Lexington, KY 40511-1071 USA Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 www.audioauthority.com AVAtrix, Audio Authority and the Double-A Symbol are trademarks or registered trademarks of Audio Authority Corporation. Copyright August, 2008.
  11. 11. Models 9878, 9879, 9880 Product Focus Back Cat 5 High Definition Wall Plate & Enclosed Audio/Video Receivers The Models 9878, 9879, & 9880 provide TV connection points for component video, coaxial digital audio, left/right analog audio, and an IR receiver input. Used with a compatible Audio Authority driver, these Cat 5 to HDTV receivers maintain pristine high-definition detail and vibrant color for outstanding audio/video at remote locations up to 1,000 feet away. 9878 Wallplate Dual-Gang Receiver • Durable stainless steel construction • Shallow 1-inch mounting depth • Cable length compensation adjustment to maintain image and sound quality over long Cat 5 runs • Fits in a standard US dual-gang wall box for convenience in installation 9878 • F-connector pass-through jack for con- venient antenna connection (requires separate coax cable run) • Dimensions (H x W x D) 4.75” X 4.75” X 9879 Wallplate Single-Gang Receiver • Includes Decora® style inserts in white, ivory, and almond (Decora STANDARD SINGLE-GANG trim covers not included) WORK BOX • Front and rear facing IR jacks for Cat 5e/6 external or in-wall IR connections CABLES • Fits standard U.S. single-gang wall boxes AUXILIARY, REAR-FACING • Cable length compensation IR JACK 9879 adjustment allows the installer to fine tune image and sound quality over long Cat 5 runs 9880 Enclosed Cat 5 Receiver • Perfect for wall & ceiling-mounted displays • Cable connections are parallel to the wall, allowing near-flush mounting for flat panel displays • Can be mounted on any flat 9880 surface, even to the back of a TV when no wall surface is available • Enclosed design mounts without a work box • Includes an IR jack
  12. 12. Back Cat 5 Wall Plate & Enclosed Audio/Video Receivers Comparison Audio Authority’s Active Gain Equalization technology (AGE) preserves image detail and color up to 1,000 feet from the source. The cable length compensation adjustment allows the installer to fine tune image quality over long Cat 5 runs. All three Cat 5 receivers are compatible with the Audio Authority AVAtrix, SixDrive, DuoDrive, or UniDrive A/V distribution systems. Use any combination of receivers in the same system for the perfect mix of performance and aesthetics. FEATURES & SPECIFICATIONS: 9878 Wallplate 9879 Wallplate* 9880 Receiver Cat 5 Inputs Required 2 2 2 IR Jacks 1 2 (1 front, 1 rear) 1 Single Gang * Dual Gang • Enclosed Cabinet • Power Through Cat 5 Bus • • • Active Gain Equalization • • • Antenna Pass-through • Component Video In/Out YPbPr (2/1) YPbPr (2/1) YPbPr (2/1) Video Bandwidth 100MHz 100MHz 100MHz Analog Audio In/Out (L/R) • • • Digital Audio Coaxial Coaxial Coaxial Component Bandwidth Audio (Y, Pb, Pr) 10-50KHz 10-50KHz 10-50KHz Analog Audio (L/R) Video Input Resolution 480i/p, 720p, 1080i/p 480i/p, 720p, 1080i/p 480i/p, 720p, 1080i/p Digital Audio (Optical) Video Output Resolution 480i/p, 720p, 1080i/p 480i/p, 720p, 1080i/p 480i/p, 720p, 1080i/p Digital Audio (Coax) Warranty One Year Replacement One Year Replacement One Year Replacement Antenna Pass-through Mounting Depth (inches) 1 2.5 NA Dimensions (H x W x D) 4.75 x 4.75 x 1 4 x 1.6 x 2.75 1.75 x 3.75 x 3 Weight .55 pounds .45 pounds .55 pounds Power Supply Type NA NA NA Power Requirements 100-240 VAC, 50-60Hz 100-240 VAC, 50-60Hz 100-240 VAC, 50-60Hz * Model 9879 includes three different inserts (white, almond, and ivory); Decora® style trim cover (shown) is not included. 2048 Mercer Road, Lexington, KY 40511-1071 USA Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 EXPERT AUDIO/VIDEO SOLUTIONS SINCE 1976 www.audioauthority.com 2/08
  13. 13. Model 1172 Product Focus Back AVAtrix Audio Interface ™ • Audio breakout adapter interfaces sources connected to the AVAtrix™ with an audio distribution system • Works with any brand of whole house audio • Provides either source switching or dedicated output with infrared control pass-through T he Model 1172 Audio Interface plays well with others—other whole-house audio systems, that is. The 1172 provides an audio breakout point for Audio Authority® AVAtrix HD Cat 5 Matrix systems to connect to an independent audio distribution system of any brand that accepts stereo analog audio or digital audio. It can be used in two different ways: Source Mode, for use with an advanced audio system having its own integrated switching; and Tracking Mode, ideal for an audio system employing dedicated amplifiers for each room or zone. (See the interface diagram on the back page to learn more about how these two innovative modes work.) B Manufactured in the USA by Audio Authority Corporation, Lexington Kentucky • 800-322-8346 or 859-233-4599 • www.audioauthority.com Model 1172 Audio Interface 1172 rear panel 1172 FEATURES: HD CAT 5 MATRIX WITH 1172 • Analog and digital audio outputs • Audio signals from sources via the internal AVAtrix bus cable • Source mode for intelligent audio systems that have integrated switching • Tracking mode for audio systems with dedi- cated zone amplifiers • Infrared remote jack for IR pathway • Model 1191 rack ears included • Multi-port bus cable not included The Model 1172 Audio Interface is a companion product to the • All metal construction AVAtrix HD Cat 5 Matrix Systems, such as the AVX-562 shown above. • Made proudly in our own US factory The 1172 provides six audio source outputs to a whole-house audio system to enable coordination of a room’s audio program with the video program being received on an AVAtrix Cat 5 wallplate/receiver. The 1172’s audio outputs, routed from audio/video sources connected to the AVAtrix, thus complement any audio-only sources directly connected to the audio distribution system. Audio signals from the sources are also available at the wallplate/receiver outputs.
  14. 14. Back MODEL 1172: HOW IT WORKS The Model 1172 supports two modes of operation: Source Mode and Tracking Mode. Both modes allow for infrared communication from the AVAtrix wallplate/receivers in each room back to a whole house audio system. Source 1 Source 1 2 Source Source Mode AV Signals Source 2 3 AV Signals Source Source Mode simply supplies Source 3 4 Wallplate Source Source 4 5 Wallplate audio streams from the six AV Source Wallplate Source 5 6 Source Wallplate sources residing on the AVAtrix to Wallplate Source 6 Wallplate a whole-house audio distribution Wallplate system. In Source Mode, it is the Wallplate Wallplate audio distribution system that Wallplate Wallplate selects which audio stream is to WHOLE HOUSE Model 1172 AV Signals (over Cat 5) Wallplate be sent to each room and also WHOLE HOUSE AUDIO SYSTEM Model 1172 AV Signals (over Cat 5) AUDIO SYSTEM WITH INTEGRATED controls the AV sources resident WITHSWITCHING INTEGRATED SWITCHING Audio from Source 1 on the AVAtrix. Audio from Source 1 2 Audio from Source In addition to a video Audio from Source 2 3 Audio from Source Audio In addition to wallplate display, any a video Audio from Source 3 4 Audio from Source display, any wallplate a may also support Signals Audio Audio from Source 4 5 Audio from Source Signals surround receiver and may also support a Audio from Source 5 6 Audio from Source speaker system. surround receiver and Audio from Source 6 speaker system. Source 1 Tracking Mode Source 1 2 Source Source 2 3 Tracking Mode is used with whole- AV Signals Source AV Signals Source 3 4 Source Wallplate in Room 1 house audio systems where the Wallplate in Room 1 Source 4 5 Source Wallplate in Room 2 audio for each room is provided Source 5 6 Wallplate in Room 2 Source Wallplate in Room 3 by an amp or receiver dedicated Source 6 Wallplate in Room 3 to that room. In this mode, each Wallplate in Room 4 Wallplate in Room 4 1172 output switches its content Wallplate in Room 5 Wallplate in Room 5 along with the AVAtrix so that the WHOLE HOUSE Wallplate in Room 6 audio distribution system’s output WHOLE HOUSE Model 1172 AV Signals (over Cat 5) Wallplate in Room 6 AUDIO SYSTEM WITH AUDIO SYSTEMZONE DEDICATED WITH Model 1172 AV Signals (over Cat 5) automatically matches what is DEDICATED ZONE AMPLIFIERS playing on the video display in each AMPLIFIERS Zone Amp for Room 1 Zone Amp for Room 1 2 room. In this way, when a video Zone Amp for Room In addition to a video Zone Amp for Room 2 3 Zone Amp for Room In addition to wallplate display, any a video source is routed to the AVAtrix Zone Amp for Room 3 4 Zone Amp for Room Audio display, any wallplate a may also support Signals Audio surround receiver and may also support a wallplate, the matching audio Zone Amp for Room 4 5 Zone Amp for Room Zone Amp for Room 5 6 Signals speaker system. surround receiver and can be heard through the room’s Zone Amp for Room speaker system. Zone Amp for Room 6 speakers. SPECIFICATIONS: Model Number: 1172 Size (H-W-D, inches): 41.75 x 16.675 x 9 Audio Inputs: 6 from AVAtrix bus cable Warranty: One year replacement Audio Outputs: 6 stereo analog & digital coaxial Power Requirements: 18V DC power supply Audio Bandwidth: 10 - 50KHz Accessories Included: User manual 2048 Mercer Road, Lexington, KY 40511-1071 USA Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 EXPERT AUDIO/VIDEO SOLUTIONS SINCE 1976 www.audioauthority.com 4/08
  15. 15. Model AVM-71 Product Focus Back SixDrive® Cat 5 HDTV Distribution System • Distributes audio and video to multiple zones over Cat 5 cables • Single-source with six-output distribution, expandable up to 42 zones • Delivers HDTV component video, digital audio, and analog audio to Cat 5 wallplates T he Model AVM-71 SixDrive™ incorporates the key signal paths necessary for premium audio and video distribution systems. Consisting of an 1171 MultiDriver and six 9879 Wallplate Receivers, the AVM-71 system distributes component video at resolutions up to 1080p, as well as both digital and analog audio, over two inexpensive, easy-to-install Cat 5 cables from a single source to each of six outputs. 1170 Multidriver Expanders and additional Wallplate receivers can be added to expand system capacity to a maximum of 42 zones. Audio Authority’s Active Gain Equalization (AGE) technology and unique cable length compensation allows adjustment for the optimal signal strength at any distance up to 1,000 feet from the source, faithfully preserving the signal’s original color and detail. 1171 rear panel 1170 rear panel Expand your system by adding Audio Authority 1170 Cat 5 MultiDriver Expanders to your AVM-71. Each stackable 1170 adds six additional outputs to the single source’s signal distribution for up to a maximum of 42 remote locations. Additional Wallplate/Receivers purchased separately. AVM-71 FEATURES: 9879 CAT 5 RECEIVERS: • One input, six Cat 5 wallplate outputs (9879 wallplates The Cat 5 outputs from Models included) 1170 and 1171 terminate at 9879 • High bandwidth component video (YPbPr) up to 1080p wallplate/receivers which provide • Coaxial digital and stereo analog audio a remote connection point for an • Infrared remote jack for IR pathway HDTV video and/or audio sound • Wallplate powered through Cat 5 cable system. Each wallplate can be • Rack-mount ears sold separately (Model 1191) adjusted to compensate for the • Expandable in increments of six, up to 42 zones cable length up to 1,000 feet. • Provides reliable ground isolation, preventing hum bars 9879 wallplates come with three different decora color inserts, and and other artifacts associated with ground loops. install easily into standard work • Compatible with 9878, 9879 and 9880 receivers boxes.
  16. 16. Back SixDrive® Cat 5 Wallplate/Receivers Audio Authority’s unique selection of thoughtfully designed Cat 5 receivers are easy to install, and provide all the necessary signal types for HD entertainment systems. Component video, digital and analog audio signals are carried on two Cat 5e/6 cables to each wallplate/receiver. The active circuitry in the wallplates is powered through the Cat 5 bus, so no additional power supplies are needed at the wallplate locations. The Cat 5 bus provides a pathway for a 3rd party IR remote control signals. IR signals from receivers at the zone locations are output on the IR jack on the 1171 rear panel. In addition to the IR jack on the front of the wallplate, the 9879 has a unique auxiliary IR jack on the rear, allowing IR to be easily routed inside the wall. STANDARD SINGLE-GANG WORK BOX Cat 5e/6 CABLES AUXILIARY, In addition to the 9879 Decora-style wallplate/receiver (above, REAR-FACING center) that comes with the AVM-71 system, Audio Authority IR JACK offers the option of using the 9878 stainless steel, dual-gang wallplate (left) or the enclosed 9880 receiver (right). The three can be used in any combination with the 1171 and 1170. 9879 wallplate rear panel AVM-71 MultiDriver rear panel AVM-71 SPECIFICATIONS: Model Numbers: 1171 with 9879 Input Signal Resolutions: 480i/p, 540i/p, 720p, 1080i/p Video Input Connectors: Component video (YPbPr): x1 RCA Output Signal Resolutions: 480i/p, 540i/p, 720p, 1080i/p Video Output Connectors: Component video (YPbPr) x6 dual Cat 5 Size (H x W x D): 1.75 x 16.675 x 9 Video Bandwidth: 100MHz Weight (net): 12.25 Audio Input Connectors: Stereo analog, digital optical & coaxial x1 RCA Warranty: One year replacement Audio Output Connectors: Stereo analog, digital coaxial x6 dual Cat 5 Power Requirements: 18 volts DC Audio Bandwidth: 10 - 50KHz Regulatory Approvals: FCC, CE UTP Cable Requirements: Category 5e/6 with RJ-45 termination Accessories Included: User manual, power supply 2048 Mercer Road, Lexington, KY 40511-1071 USA Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 EXPERT AUDIO/VIDEO SOLUTIONS SINCE 1976 www.audioauthority.com 8/08
  17. 17. Model 9870D Product Focus Back DuoDrive® HDTV Distribution System • Distribute audio and video to multiple areas of the home over CAT 5 cables • Single-source/two output distribution, expandable in pairs with additional modules • Distributes HDTV component video, digital audio, and analog audio. T he Model 9870D DuoDrive™ incorporates the key signal paths necessary for premium home audio and video entertainment systems. Consisting of one 9871 Driver and two 9879 wallplate/receivers, the DuoDrive distributes component video up to a resolution of 1080p, as well as both digital and analog audio, over two inexpensive, easy-to-install CAT 5 cables from a single source to two remote locations. The DuoDrive is easily expandable in increments of two outputs by adding additional 9870Ds. Audio Authority’s unique cable length compensation also allows adjustment for the optimal signal strength at any distance up to 1,000 feet from the source, faithfully preserving the signal’s original color and detail for maximum enjoyment. DuoDrive FEATURES: • One input, two Cat 5 wallplate outputs (wallplates included) 9879 Wallplate/Receiver • High bandwidth component video (YPbPr) up to 1080p • Coaxial digital and stereo analog audio • Infrared remote jack for IR pathway • Wallplate powered through Cat 5 cable • Antenna pass-through jack • Expandable in increments of two by adding more driver modules • Provides reliable ground isolation, preventing hum bars and other artifacts associated with ground loops • Compatible with Audio Authority 9878, 9879, and 9880 receivers 9870D WALLPLATE/RECEIVERS: The Cat 5 outputs from a Model 9871 driver terminate at 9879 wallplate/receivers, (or 9880 self-enclosed receivers) which provide a remote connection point for an HDTV video and/or audio sound system. The active circuitry in the wallplates is powered through the Cat 5 bus, so no power connection is required at the remote zone. Each receiver can be adjusted to compensate Each of the two Model 9871 for the cable length up to 1,000 feet. Component Driver outputs works over a pair video, digital and analog audio signals are carried on of inexpensive, easy to install two Cat 5 cables to each wallplate/receiver. A control Cat 5 cables. The wall-mountable signal pathway for a 3rd party IR remote system is also 9870D system accepts digital and analog audio, and HD component part of the Cat 5 bus. This pathway allows the desired video inputs. source to be selected remotely via IR.
  18. 18. Back DUODRIVE SYSTEM OVERVIEW The 9870D is comprised of the Model 9871 RCA-to-Cat 5 Driver and the Model 9879 wallplate. These products enable distribution of audio, video and IR control signals on Cat 5 cable runs of up to 1,000 feet. The buffered Cat 5 bus outputs on each 9871 drive one or two 9879 wallplates. To expand output capacity of the system, connect together an 9879 9879 unlimited number of Drivers using an Audio Authority Kit 46. The 9879 offers a wallplate/receiver form factor to fit a standard single-gang electrical box. DC 9879 9879 power for each wallplate is supplied through the Cat 5 cable from the 9871’s power supply. In addition to its Cat 5 outputs, the 9871 RCA bus output may be used as a pass-through output for a nearby HDTV and/or home theater. 9878 & 9880 OPTIONAL RECEIVERS In addition to the two 9879 wallplate/receivers (shown on page one) that come with each 9870D system, Audio Authority offers the option of using the 9878 dual-gang, stainless steel wallplate (left) or the enclosed 9880 receiver (right). The three can be used in any combination with each other. SPECIFICATIONS: Model Numbers: 9870D, 9871, 9879 Audio Parameters Agency Approvals: FCC, CE Video Parameters Analog: Left/right DC Input Connector: 5.5 X 2.1mm Signal Type: Component video (YPbPr) Digital Audio Type: Coaxial DC Voltage/Polarity: 18V/center positive Video Formats (Analog): 480i/p, 540i/p, 720p, 1080i/p Input Impedance: 75 ohms/47.5K ohms Max DC Input Current: 350mA I/O Impedance: 75 ohms Min Load Impedance: 75 ohms/10K ohms Power Supply: 571-014 Input Ground Isolation: Yes Multi-channel Digital: Yes 9871 Size (H-W-D, inches): 9 x 3.5 x 1 Gain: 1 Frequency Response: 10-50KHz 9879 Size (H-W-D, inches): 4 x 1.6 x 2.75 Gain Accuracy: 3% S/N Ratio: 55dB Warranty: One year replacement 3dB Bandwidth: 120MHz THD+Noise: 0.10% Agency Approvals: FCC, CE Input Coupling: AC Crosstalk: -70dB Accessories Included: User manual S/N Ratio: 35dB Max Gain/Equalization: 40dB equalization 2048 Mercer Road, Lexington, KY 40511-1071 USA Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 EXPERT AUDIO/VIDEO SOLUTIONS SINCE 1976 www.audioauthority.com 8/08
  19. 19. Model AVP-11 Product Focus Back Point to Point HDTV Cat 5 System • Component video, digital audio, and analog audio • Pristine HDTV signals up to 1,000 feet from source • IR remote control signal pathway in Cat 5 bus The UniDrive delivers HDTV signals from a single source to one remote location up to 1,000 feet away. Unlike passive balun systems, the UniDrive employs Active Gain Equalization (AGE), dramatically extending range and signal integrity. In addition to HDTV audio and video signals, the UniDrive has a 3-conductor pathway for infrared control signals. This pathway can be used for signals traveling in either direction. AVP-11 FEATURES: The system includes one Model 9880T Cat 5 Transmitter, • One A/V input, one A/V output and one Model 9880 Cat 5 Receiver. The cable length • Audio, video and IR signals carried over two Cat 5 cables compensation adjustment on the receiver allows the • High bandwidth component video (YPbPr) 1080p installer to fine tune image quality over long Cat 5 runs. • Digital audio (coaxial) and stereo analog audio Only the transmitter requires a power supply; the receiver is • Active Gain Equalization (AGE) technology powered over the Cat 5 cable. • Cable length compensation adjustment at remote location • Power supply for transmitter also powers receiver Transmitter rear view Receiver rear view • Wallplate or enclosed receiver option Compatible Cat 5 Receivers: Models 9878 (not shown), 9879 and 9880. IR POWER B A IR CABLE LENGTH B A IN/OUT CAT 5 IN/OUT COMPENSATION CAT 5 SPECIFICATIONS: Model Number: AVP-11 (9880/9880T) Video Parameters DC Input Connector: 5.5 X 2.1mm Audio Parameters Video Signal Type: Component (YPbPr) DC Input Voltage/Polarity: 18V/Center positive Analog Audio Input/Output: Right/Left Stereo Video Formats (Analog): 480i/p, 540i/p, 720p, 1080i/p Max DC Input Current: 250mA Digital Input/Output Type: Coaxial Input/Output Impedance: 75 ohms Transmitter Size (H-W-D, inches): 1.75 x 3.75 x 3 Input Impedance: 75 ohms/100K ohms Input Ground Isolation: Yes Receiver Size (H-W-D, inches): 1.75 x 3.75 x 3 Min Load Impedance: 75 ohms/10K ohms Gain: 1 Warranty: One Year Replacement Multi-channel Digital: Yes Gain Accuracy: 2% Agency Approvals: FCC, CE Frequency Response: 10-50KHz 3dB Bandwidth: 120MHz Accessories Included: 571-014 Power Supply S/N Ratio: 55dB Input Coupling: AC THD+Noise: 0.10% S/N Ratio: 65dB Crosstalk: -70dB Max Equalization: 40dB 2048 Mercer Road, Lexington, KY 40511-1071 USA Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 EXPERT AUDIO/VIDEO SOLUTIONS SINCE 1976 www.audioauthority.com 2/08
  20. 20. Model HDP-11 Product Focus Back Ultra Long-Range Cat 5 HDMI • Extends HDMI signals up to 450 feet • Excellent video quality and reliability • Embedded 2-channel PCM digital audio • Gain and EQ controls on Receiver for optimal picture quality The HDP-11 can transmit HDMI signals up to 450 feet over two Cat 5 cables, with support for resolutions up to 1080p/60 and 2-channel PCM audio. The system’s ultra-long extension 1381T Transmitter 1381R Receiver is possible through unique hybrid transmission methods. Cat 5 cable “A” carries the video and audio signals, and cable “B” carries the DDC information, including HDCP communication. When transmitting video signals that are not protected by HDCP, it is possible that only cable A will be required. MODEL HDP-11 FEATURES: • Resolutions to 1080p @ 60Hz, 1920x1200 • Normal operation requires two Cat 5, 5e or Cat 6 cables INPUT • Single cable operation is sometimes possible, depending on source • Maximum distance 450 feet (150 meters) • Embedded HDMI digital audio (2-channel PCM) • Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifica- tions • Gain and EQ controls on 1381R Receiver optimize digital 1381T Transmitter and 1381R Receiver inputs and outputs (HDMI not shown) SPECIFICATIONS: System A/V Input/Output: HDMI type A connector Operating Humidity: 10% to 90%, Non-condensing System Cat 5e/6 Output/Input: RJ-45 connector x 2 Storage Temperature: -10° to +70° C (12° to +158° F) HDMI Output Resolutions: 480i/p, 576i/p, 720p, 1080i/p Storage Humidity: 10% to 90%, Non-condensing Maximum Resolution: 1080p/60Hz (1920x1200) Size, Each Unit (H-W-D, inches): 1.2 x 4.85 x 5 (30x124x128mm) Maximum Range: Approximately 450 ft. (150m) Weight (Net): Each unit: 1.54 lb (700g) Standards Compliance: HDMI v1.2, HDCP 1.1, DVI 1.0 Limited Warranty: 1 year replacement TMDS Clock Speed: 165MHz External Power Supply: 5VDC@2A Data Bit Rate 1.65Gbps Regulatory Approvals: FCC, CE, RoHS Digital Audio: 2-channel PCM audio Power Supply Approvals: UL, CUL, CE, PSE, GS, RoHS Cable Requirements: Cat 5e or Cat 6 UTP Accessories Included: Manual, AC adapter Operating Temperature: 0° to +50° C (+32° to +122° F) 2048 Mercer Road, Lexington, KY 40511-1071 USA Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 EXPERT AUDIO/VIDEO SOLUTIONS SINCE 1976 www.audioauthority.com 2/08
  21. 21. Model EDP-11 Product Focus Back Cat 5 HDMI Extender System • Extends HDMI signals up to 195 feet over Cat 5e/6 • All digital system ensures maximum A/V signal quality • Attractive, easy to install wallplate The EDP-11 is an all-digital extension system that transmits HDMI signals over Cat 5 cables. Retrofit-friendly Cat 5 UTP cable helps integrators minimize installation time while extending HDMI farther than standard cabling allows. Compatible with the newest HDMI ver. 1.3 features like Deep Color (12 bits per channel), lossless audio, and 1080p video, the EDP-11 enables maximum performance in 1384TD Transmitter 1384RD Receiver an integration-friendly package. Maximum distances from 115 to 195 ft are possible, depending on the cable used, and the resolution and refresh rate of the source output. Premium cables ensure maximum performance and reliability. MODEL EDP-11 FEATURES: • Maximum resolutions: 1080p @ 60Hz, 1920x1200 • Supports 480i, 480p, 720p, 1080i, 1080p and multiple PC resolu- tions • Requires two Cat 5e or Cat 6 UTP cables (Cat 6 is recommended) Model 1384RD Receiver www.audioauthority.com Model 1384TD Transmitter www.audioauthority.com Model 1384RD Receiver www.audioauthority.com Model 13 www.au 800-322-8346 800-322-8346 800-322-8346 8 • Power for both wallplates supplied at transmitter location • Maximum distance using Cat 5e cable: 115 ft (1080p) or 130 ft (1080i) • Maximum distance using Cat 6 cable: 145 ft (1080p) or 195 ft (1080i) • Supports up to 36 bit color depth (12 bits per TMDS channel) 1384TD Cat 5 outputs 1384RD Cat 5 inputs SPECIFICATIONS: 1384TD A/V Input: HDMI type A connector Digital Audio: Multi-channel lossless audio 1384RD A/V Output: HDMI type A connector Size (H-W-D, inches): 4.5 x 2.75 x 1.25 (113x70x32mm) 1384TD Cat 5e/6 Output: RJ-45 connector x 2 Weight (Net): 4.8oz (136g) 1384RD Cat 5e/6 Input: RJ-45 connector x 2 Limited Warranty: 1 year replacement HDMI Output Resolutions: 480i/p, 576i/p, 720p, 1080i/p External Power Supply: 5VDC@2A Range: 1080i/Cat 6 Cable: Approximately 195 ft. (60m) Max. Power Consumption: 15 watts Range: 1080p/Cat 5e Cable: Approximately 115 ft. (35m) Regulatory Approvals: FCC, CE, RoHS Standards Compliance: HDMI v1.3, HDCP 1.1, DVI 1.0 Power Supply Approvals: UL, CUL, CE, PSE, GS, RoHS TMDS Clock Speed: 225MHz Accessories Included: Manual, AC adapter, trim plates Data Bit Rate 2.25Gbps 2048 Mercer Road, Lexington, KY 40511-1071 USA Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 EXPERT AUDIO/VIDEO SOLUTIONS SINCE 1976 www.audioauthority.com 2/08

×