http://shop.bsigroup.com/hsstandards   Health and safety management
                                                      ...
Health and safety standards and publications
    from BSI
    Many organizations find effective health and safety manageme...
Health and Safety Management
  BS OHSAS 18001:2007 Occupational health and safety                                         ...
Health and Safety Management
    Electrical Safety – The Facts                                                            ...
Health and Safety Management
  Winning with Health and Safety. A Guide for Business                                       ...
Personal Protective Equipment (PPE)
    BS ISO 13506:2008 Protective clothing against heat and                            ...
Personal Protective Equipment (PPE)
  BS 8468-4:2008 Respiratory protective devices for use                               ...
Manufacturing Safety
    BS 8520-1:2009 Equipment used in the controlled                                                  ...
Manufacturing Safety
  BS EN ISO 13850:2008 Safety of machinery. Emergency                                                ...
Manufacturing Safety
     BS EN 14656:2006 Safety of machinery. Safety                                                    ...
Manufacturing Safety
  BS EN ISO 12100-2:2003+Amendment1:2009 Safety of                                                   ...
2010 Occupational Health and Safety Brochure
2010 Occupational Health and Safety Brochure
2010 Occupational Health and Safety Brochure
2010 Occupational Health and Safety Brochure
2010 Occupational Health and Safety Brochure
Upcoming SlideShare
Loading in...5
×

2010 Occupational Health and Safety Brochure

2,037

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
2,037
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
88
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "2010 Occupational Health and Safety Brochure"

  1. 1. http://shop.bsigroup.com/hsstandards Health and safety management Personal protective equipment (PPE) Manufacturing safety Construction safety Fire safety Food safety Child safety 2010 Effective health and safety Occupational Health and Safety management can help minimize potential hazards and accidents raising standards worldwide ™
  2. 2. Health and safety standards and publications from BSI Many organizations find effective health and safety management brings great business benefit. Despite this, many fail to manage this discipline well and so: • 1.2 million people who worked during the last year were suffering from an illness they believed was caused or made worse by their current or past work. • 29.3 million overall (1.24 days per worker), 24.6 million days were lost due to work-related ill health and 4.7 million due to workplace injury. Source: Key annual figures 2008/09, Health and Safety Executive 2009 Major accidents at work in recent years means that there is greater emphasis on the management of occupational health and safety (OH&S) in legislation, which all employers MUST embrace. BSI publications will make you aware of your responsibilities as an employer and can help you implement an effective health and safety management strategy. They have been developed to save lives and reduce injury, while improving your business reputation and helping you, through compliance, to avoid costly payouts. Contents Health and safety management Page 3 Fire safety Page 12 Personal protective equipment (PPE) Page 5 Food safety Page 13 Manufacturing safety Page 8 Child safety Page 14 Construction safety Page 11 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 2 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
  3. 3. Health and Safety Management BS OHSAS 18001:2007 Occupational health and safety Health and Safety Self-assessment management systems. Requirements BS OHSAS 18001 specifies requirements for an OH&S management system, to enable an organization to control its OH&S risks and improve its performance. This standard provides organizations with a framework for As legislation becomes increasingly stringent organizations need to find ways managing occupational health and safety in order to minimize to undertake reviews to assess their own performance. But to be effective, the risk of workplace ill-health and injury. reviews need to be conducted within a structured management system that is integrated within the organization. BESTSELLER BSI Health & Safety Self-assessment uses a series of questions to interrogate your occupational health and safety management system against best practice • A4 Loose-leaf/PDF • 28 pages approx • ISBN 0 580 59404 5 standards such as BS OHSAS 18001. It helps you to identify where your • BSI order ref BS OHSAS 18001 occupational health and safety management system is working well and where Price £50*, Member Price £25 the system needs attention. What it can do for you A5 LAMINATED VERSION • Help you identify OH&S risks and gaps so that you can improve and amend • A5 Laminated spiral-bound • ISBN 0 580 50938 4 • BSI order ref BIP 2137 your policy to ensure that your organization follows best practice Price £50*, Member Price £25 • Add value to your business by demonstrating good governance • Give you an appreciation of how your OH&S management system is performing against the benchmark standard BS OHSAS 18001 • Direct online access to the relevant standards and guidance so that you BS OHSAS 18002:2008 Occupational health and have the latest information at your fingertips safety management systems. Guidelines for the • Generate summary and detailed reports of your self-assessment to implementation of BS OHSAS 18001:2007 demonstrate your level of compliance to senior management and other stakeholders This publication provides generic advice on the application of BS OHSAS 18001. It explains the underlying principles Who should use this product? of BS OHSAS 18001 and describes the intent, typical inputs, • Health and safety managers processes and typical outputs, against each requirement of • Health and safety auditors BS OHSAS 18001. This is to aid the understanding and • Compliance officers and managers implementation of BS OHSAS 18001. • Integrated management systems managers ONLINE SUBSCRIPTION TOOL POPULAR STANDARD • BSI order ref BIP 3042 • A4 Loose-leaf/PDF • 90 pages • ISBN 0 580 62686 9 Price £495* + VAT • BSI order ref BS OHSAS 18002 Multi-user licences available on request. Price £60*, Member Price £30 *This price entitles one user (one user ID and password) to unlimited use of BSI Health and Safety Self-assessment for one year to be used to assess the subscribing organization only. BS 18004:2008 Guide to achieving effective occupational For further information and to view a presentation of how health and safety performance this tool could help you visit http://shop.bsigroup.com/HSOnline BS 18004 provides guidance for an occupational health and safety (OH&S) management system or the OH&S elements of an organization's overall management system. It enables an organization. All elements of BS 18004 can be incorporated into any OH&S Managing Safety the Systems Way – 4th edition management system and enables an organization to incorporate David Smith, Geoff Hunt and Clive Green OH&S within its overall management system. This essential guide provides a simple step-by-step approach for implementing BS OHSAS 18001. It is useful in helping small and POPULAR STANDARD medium-sized organizations to build a system that: is business • A4 Loose-leaf/PDF • 150 pages • ISBN 0 580 52910 8 focused; is not paper driven; reduces the risk of harm; helps keep • BSI order ref BS 18004 insurance premiums lower; helps satisfy regulators and customers. Price £200*, Member Price £100 BESTSELLER • A5 Paperback • 250 pages, 2008 • ISBN 0 580 50954 4 • BSI order ref BIP 2050 Price £30* *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/hsstandards 3 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
  4. 4. Health and Safety Management Electrical Safety – The Facts Manual Handling – The Facts Electrical Safety – The Facts looks at the responsibility of the safety This DVD identifies different everyday manual handling actions officer to understand the requirements and implications of legislation (lifting, pushing and pulling) and the problems that surround and to assist employees in meeting the obligations such legislation each type. It covers correct lifting procedures; the most common imposes upon them. It also covers important issues such as the causes of manual handling injuries; facts and figures to show prevention and control of electrical hazards.It comes complete how cautious we all must be; and ideas on how we can all try with handy assessment forms and a 15-page training booklet. to avoid injuries and be safe within the workplace. Also included are assessment forms and a manual handling training booklet. POPULAR DVD POPULAR DVD • DVD • 2005 • Published by Safety Media Ltd • DVD • 2005 • Published by Safety Media Ltd • BSI order ref BIP 3048 • BSI order ref BIP 3051 Price £129* + VAT Price £139* + VAT Risk Assessment – The Facts Stress in the Workplace – The Facts Risk Assessment – The Facts concisely sets out the principles of This DVD identifies the problem areas of stress and the many risk assessment. The DVD shows how to analyse where there is factors that relate to different individuals; tackles work-related a risk and if necessary what actions to take. It also uses strong stress and offers advice on how to help improve and maintain visual images to help you and your staff realize dangers within employee health and well-being; and comes complete with a the workplace and their responsibility to protect themselves training booklet and assessment forms. and others. The package comes complete with safety training assessment forms and a training booklet. POPULAR DVD POPULAR DVD • A5 Paperback • 2005 • Published by Safety Media Ltd • DVD • 2005 • Published by Safety Media Ltd • BSI order ref BIP 3052 • BSI order ref BIP 3055 Price £129* + VAT Price £129* + VAT Slips, Trips and Falls – The Facts Driving Safely – The Facts Driving Safely – The Facts is available in two parts: This is a useful aid for encouraging staff to play their part in preventing these most common of workplace accidents. The Driving Safely video uses examples of everyday accidents and shows how Ideal for any employee within your organization who regularly they could have been avoided, such as by planning ahead drives a company car or is required to drive a vehicle during before carrying out a task or by reporting a potential risk business hours. The video footage features important that could lead to a slip, trip or fall. information regarding how to anticipate and identify hazards whilst driving. Other features include the importance of Slips, Trips and Falls – The Facts contains assessment forms and planning your route and how to remain safe whilst driving. illustrated training booklets, and is a useful training tool in this most important of subject matters. Driving Risk Assessment Directed at Safety/Fleet Managers, it contains important aspects on assessing risks POPULAR DVD to drivers within your company. The video identifies regular car checks, company car policies and much more. • DVD • 2005 • Published by Safety Media Ltd Included with this title are assessment forms and a driving safety training booklet. • BSI order ref BIP 3049 Price £129* + VAT POPULAR DVD • DVD • 2005 • Published by Safety Media Ltd • BSI order ref BIP 3056 Introduction to Health and Safety – The Facts Price £199 * + VAT This is a new multilingual DVD covering the main principles of health and safety in the workplace. The DVD is ideal for providing your employees with an understanding of what occupational health and safety is, and what they need to Accident Book be aware of in their workplace. As of 1 January 2004, UK health and safety legislation states The DVD covers: that all accidents that happen at work must be recorded in a • Control of Substances Hazardous • Electrical Safety logbook. to Health (COSHH) • Fire Safety This Accident Book is for health and safety officers or first aid • Manual Handling • Personal Protective officers to record all the critical details of any accident. An • Slips, Trips and Falls, and more. Equipment (PPE) outline of employer and employee obligations is provided along with instructions on how to correctly complete the report pages. POPULAR DVD IT’S THE LAW • DVD • 2005 • Published by Safety Media Ltd • A4 Paperback • 100 pages, 2003 • BSI order ref BIP 3057 • Published by The Stationery Office (TSO) Price £199* + VAT • ISBN 0 117 03164 X • BSI order ref BIP 2054 Price £4.75* Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 4 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
  5. 5. Health and Safety Management Winning with Health and Safety. A Guide for Business PAS 99 Specification of common management system Pat Perry requirements as a framework for integration This publication provides the reader with no-nonsense advice PAS 99 specifies common management system requirements and guidance on implementing health and safety in their and is intended to be used as a framework for implementing business, offering a host of good practice, assessments and two or more management system standards/specifications in reviews in plain English, which will hold all managers in good an integrated way. It draws together the common requirements stead. Checklists, handy hint boxes and a CD of key proformas in management system standards/specifications. complete each publication. PUBLICLY AVAILABLE SPECIFICATION BESTSELLER • A4 Loose-leaf/PDF • 30 pages • A4 Loose-leaf with binder and CD-ROM • 128 pages, 2005 • ISBN 0 580 49059 9 • BSI order ref PAS 99 • ISBN 0 580 44094 X • BSI order ref BIP 2046 Price £40* Price £55* First Aid Training Course CD-ROM OH&S Management Systems – A Practical Approach Fully interactive CD-ROM that aids compliance with This DVD provides an excellent introduction to health and First Aid at Work Regulations. An accurate and easily safety for managers and staff. It shows the main elements understood course, using graphics, photography and digital of a safety management system, how it works, and why it video, the CD-ROM monitors individual progress through is successful in achieving continual improvement in safety. short tests taken at intervals throughout the course. The program uses the experience of case studies form the Certificates can be generated at the end of the course, service and manufacturing industries to show how an OH&S allowing each individual to demonstrate successful management system can be successfully implemented and completion of the final examination. achieve tangible results in the work program. The DVD comes with a CD containing a self-paced learning guide for facilitators. BESTSELLER • CD-ROM • 2003 • BSI order ref BIP 3005 DVD AND CD-ROM Price £99* + VAT • DVD and CD-ROM • 16 mins, 2005 • Published by Nicholas & Smith • BSI order ref BIP 3036 Price £395* + VAT Personal Protective Equipment (PPE) BS EN ISO 9185:2007 Protective clothing. Assessment BS EN 1149-5:2008 Protective clothing. Electrostatic of resistance of materials to molten metal splash properties. Material performance and design BS EN ISO 9185 specifies a method for assessing the heat requirements penetration resistance of materials intended for use in clothing BS EN 1149-5 is part of a series of standards for test methods to protect against large splashes of molten metal. It provides and requirements for electrostatic properties of protective specific procedures for assessing the effects of splashes of clothing. molten aluminium, molten cryolite, molten copper, molten iron BS EN 1149-5 specifies material and design requirements for and molten mild steel. electrostatic dissipative protective clothing. It covers clothing used as part of a total earthed system, to avoid incendiary discharges. POPULAR STANDARD • A4 Loose-leaf/PDF • 24 pages • ISBN 0 580 53410 2 POPULAR STANDARD • BSI order ref BS EN ISO 9185 • A4 Loose-leaf/PDF • 12 pages • ISBN 0 580 54878 9 Price £124*, Member Price £62 • BSI order ref BS EN 1149-5 Price £70*, Member Price £35 BS EN ISO 11611:2007 Protective clothing for use in welding and allied processes BS EN ISO 11611 specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body that are to be worn during welding and allied processes with comparable risks. POPULAR STANDARD • A4 Loose-leaf/PDF • 26 pages • ISBN 0 580 53202 3 • BSI order ref BS EN ISO 11611 Price £124*, Member Price £62 *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/hsstandards 5 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
  6. 6. Personal Protective Equipment (PPE) BS ISO 13506:2008 Protective clothing against heat and BS EN 1486:2007 Protective clothing for fire-fighters. flame. Test method for complete garments. Prediction Test methods and requirements for reflective clothing of burn injury using an instrumented manikin for specialized fire-fighting BS ISO 13506 provides the general principles of a test method BS EN 1486 considers requirements for the protection of the whole for evaluating the performance of complete garments or body including head, hands and feet. This European Standard protective clothing ensembles in a flash fire or other short specifies test methods and minimum performance requirements duration exposures. This test method characterizes the thermal for reflective protective clothing used in specialised fire-fighting. protection provided by garments, based on the measurement of heat transfer to a full-size manikin exposed to a laboratory POPULAR STANDARD simulation of a fire with controlled heat flux density, duration • A4 Loose-leaf/PDF • 32 pages and flame distribution. • ISBN 0 580 53944 2 • BSI order ref BS EN 1486 POPULAR STANDARD Price £124*, Member Price £62 • A4 Loose-leaf/PDF • 38 pages • ISBN 0 580 53454 6 • BSI order ref BS ISO 13506 Price £142*, Member Price £71 BS EN 443:2008 Helmets for fire fighting in buildings and other structures BS EN 443 specifies minimum requirements for firefighters' BS EN ISO 14116:2008 Protective clothing. Protection helmets protecting the upper head mainly against the effects against heat and flame. Limited flame spread materials, of impact, penetration and heat and flame, whilst firefighting material assemblies and clothing in buildings and other structures. BS EN ISO 14116 specifies the performance requirements for the POPULAR STANDARD limited flame spread properties of materials, material assemblies • A4 Loose-leaf/PDF • 44 pages and protective clothing in order to reduce the possibility of the clothing burning and therefore avoiding a hazard. Additional • ISBN 0 580 53895 7 • BSI order ref BS EN 443 requirements for clothing are also specified. Price £142*, Member Price £71 POPULAR STANDARD • A4 Loose-leaf/PDF • 14 pages BS 8497-1:2008 Eyewear for protection against intense • ISBN 0 580 63496 3 light sources used on humans and animals for cosmetic • BSI order ref BS EN ISO 14116 and medical applications. Specification for products Price £86*, Member Price £43 BS 8497-2 gives guidance and information to users, manufacturers and suppliers of ILS devices and safety advisors on the selection and safe use of eye protectors for humans and BS EN 15614:2007 Protective clothing for firefighters. animals for cosmetic and medical applications used against Laboratory test methods and performance excessive exposure to optical radiation in the spectral range requirements for wildland clothing 180 nm to 3 000 nm, with the exception of laser radiation. BS EN 15614 specifies methods of test and minimum POPULAR STANDARD performance requirements for protective clothing, designed • A4 Loose-leaf/PDF • 20 pages to protect the wearer's body, except the head, hands and feet, to be worn in wildland firefighting and associated activities. • ISBN 0 580 58403 9 • BSI order ref BS 8497-1 It covers the general design of the clothing, the minimum level Price £86*, Member Price £43 of performance for the materials employed and the methods of test to determine these levels. BS 8468-1:2006 Respiratory equipment for use against POPULAR STANDARD chemical, biological, radiological and nuclear (CBRN) • A4 Loose-leaf/PDF • 22 pages • ISBN 0 580 57950 9 agents. Positive pressure, self-contained, open-circuit • BSI order ref BS EN 15614 breathing apparatus. Specification Price £86*, Member Price £43 BS 8468-1 specifies requirements for positive pressure, self- contained, open-circuit breathing apparatus (SCBA) intended to be used during firefighting, rescue, evacuation, escape, hazard BS 8469:2007 Personal protective equipment for containment and decontamination, and similar activities by firefighters. Assessment of ergonomic performance emergency first responders (fire, ambulance, police, and associated and compatibility. Requirements and test methods civilian agencies and workers) in areas containing and contaminated by chemical, biological, radiological and nuclear (CBRN) agents. BS 8469 specifies requirements and test methods for the objective and subjective evaluation of the ergonomic and thermal impact of personal protective equipment (PPE) ensembles, including clothing POPULAR STANDARD and respiratory protective equipment (RPE), on firefighters. • A4 Loose-leaf/PDF • 16 pages • ISBN 0 580 48086 0 • BSI order ref BS 8468-1 POPULAR STANDARD Price £86*, Member Price £43 • A4 Loose-leaf/PDF • 52 pages • ISBN 0 580 62160 4 • BSI order ref BS 8469 Price £172*, Member Price £86 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 6 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
  7. 7. Personal Protective Equipment (PPE) BS 8468-4:2008 Respiratory protective devices for use BS EN 352-8:2008 Hearing protectors. Safety against chemical, biological, radiological and nuclear requirements and testing. Entertainment audio ear-muffs (CBRN) agents. Powered air-purifying respirators. BS EN 352-8 is about entertainment audio ear-muffs. It specifies Specification constructional and design and performance requirements, methods of test, marking requirements and user information relating to the BS 8468-4 applies to powered air-purifying respirators (PAPRs) incorporation of the entertainment audio facility. intended to be used during, rescue, evacuation, escape, hazard containment and decontamination and similar activities. PAPR The requirements of BS EN 352-8 take account of the ergonomic are an air-purifying respiratory protective device that uses an interaction between the wearer, the device and, where possible, electrically operated blower to force ambient atmosphere through the working environment in which the device is likely to be used. air-purifying elements to the respiratory interface POPULAR STANDARD • A4 Loose-leaf/PDF • 16 pages • ISBN 0 580 53397 6 POPULAR STANDARD • BSI order ref BS EN 352-8 • A4 Loose-leaf/PDF • 28 pages • ISBN 0 580 56883 1 Price £86*, Member Price £43 • BSI order ref BS 8468-4 Price £124*, Member Price £62 BS EN ISO 12402-7:2007 Personal flotation devices. Materials and components. Safety requirements and BS EN 13274-7:2008 Respiratory protective devices. test methods Methods of test. Determination of particle filter This part of ISO 12402 specifies the minimum requirements for penetration construction and performance of materials and components of BS EN 13274-7 is a supplement to the specific device standards personal flotation devices as well as relevant test methods. for respiratory protective devices. Test methods are specified for complete or parts of devices. If deviations from the test method POPULAR STANDARD given in this standard are necessary, these deviations will be • A4 Loose-leaf/PDF • 90 pages specified in the relevant device standard. • ISBN 0 580 50867 7 • BSI order ref BS EN 12402-7 POPULAR STANDARD Price £186*, Member Price £93 • A4 Loose-leaf/PDF • 22 pages • ISBN 0 580 58578 4 • BSI order ref BS EN 13274-7 Price £86*, Member Price £43 BS EN 13921:2007 Personal protective equipment. Ergonomic principles BS EN 13921 provides guidance on the generic ergonomic BS EN 15333-1:2008 Respiratory equipment. Open-circuit characteristics related to personal protective equipment (PPE). umbilical supplied compressed gas diving apparatus. BS EN 13921 specifies for the writers of PPE product standards, Demand apparatus principles relating to: • Anthropometric characteristics related to PPE BS EN 15333-1 specifies minimum requirements for demand • The biomechanical interaction between PPE and the human body surface supplied and demand surface oriented diving apparatus • The thermal interaction between PPE and the human body to ensure a minimum level of safe operation of the apparatus. • The interaction between PPE and the human senses: vision; hearing; smell and taste; and skin contact. POPULAR STANDARD • A4 Loose-leaf/PDF • 60 pages POPULAR STANDARD • ISBN 0 580 63442 0 • BSI order ref BS EN 15333-1 • A4 Loose-leaf/PDF • 32 pages • ISBN 0 580 53156 9 Price £172*, Member Price £86 • BSI order ref BS EN 13921 Price £124*, Member Price £62 BS EN 813:2008 Personal fall protection equipment. Sit harnesses Personal Protective Equipment BS EN 813 specifies requirements, testing, marking and Protective clothing and footwear, eyesight and hearing protectors information to be supplied by the manufacturer for sit harnesses and breathing apparatus all fall within the scope of the Personal to be used in restraint, work positioning and rope access systems, Protective Equipment Directive for Simple, Intermediate and where a low point of attachment is required. Sit harnesses are not Complex Design. This publication has been produced for all suitable to be used for fall arrest purposes. those involved with the design, manufacture and use of personal protective equipment. This guide shows you how to CE mark your POPULAR STANDARD products. To keep you informed of key developments, an update service is available, which is available to you free of charge for • A4 Loose-leaf/PDF • 20 pages the first year, after which you can renew for an annual fee. • ISBN 0 580 53394 5 • BSI order ref BS EN 813 Price £86*, Member Price £43 TECHNICAL HANDBOOK • A4 Loose-leaf with binder • 42 pages • ISBN 0 580 26420 3 • BSI order ref TH42072 Price £162* Includes 12 months of free updates *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/hsstandards 7 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
  8. 8. Manufacturing Safety BS 8520-1:2009 Equipment used in the controlled BS EN 999:1998+Amendment1 Safety of machinery. removal of asbestos containing materials. Controlled The positioning of protective equipment in respect wetting equipment. Specification of approach speeds of parts of the human body BS 8520-1 provides the asbestos removal industry with a The protective equipment described in this standard to minimise specification for equipment used in the controlled wetting of risk relies on the relevant parts of that equipment being correctly asbestos containing materials. It promotes the manufacture of positioned in relation to the danger zone. equipment and materials that will effectively wet asbestos- BS EN 999 provides parameters based on values for hand/arm and containing materials and suppress asbestos fibres both during approach speeds. It also provides a methodology to determine the and after the asbestos removal process. minimum distances from specific sensing or actuating devices of protective equipment to a danger zone. NEW STANDARD POPULAR STANDARD • A4 Loose-leaf/PDF • 18 pages • ISBN 0 580 64548 8 • A4 Loose-leaf/PDF • 28 pages • ISBN 0 580 61358 6 • BSI order ref BS 8520-1 • BSI order ref BS EN 999 Price £84*, Member Price £42 Price £120*, Member Price £60 BS 8520-2:2009 Equipment used in the controlled removal of asbestos-containing materials. Negative pressure units. Specification BS EN 349:1993+Amendment1 Safety of machinery. BS 8520-2 provides negative pressure unit (NPU) manufacturers Minimum gaps to avoid crushing of parts of the human with a minimum specification for the manufacture of NPUs. body Although the manufacture of NPUs has previously met the expectations of the asbestos removal industry, no specifications BS EN 349:1993 specifies minimum gaps relative to parts of the or specific guidance existed. human body in machinery and is applicable when adequate safety can be achieved by this method. It aims to enable the user (e.g. NEW STANDARD standard makers, designers of machinery) to avoid hazards from crushing zones. • A4 Loose-leaf/PDF • 20 pages • ISBN 0 580 64549 5 • BSI order ref BS 8520-2 Price £84*, Member Price £42 POPULAR STANDARD • A4 Loose-leaf/PDF • 14 pages • ISBN 0 580 60963 3 BS 8520-3:2009 Equipment used in the controlled • BSI order ref BS EN 349 removal of asbestos-containing materials. Operation, Price £70*, Member Price £35 cleaning and maintenance of class H vacuum cleaners. Code of practice BS 8520-3 gives recommendations for the operation, cleaning and maintenance of class H (high hazard) vacuum cleaners containing BS EN 415-8:2008 Safety of packaging machines. a filter conforming to BS EN 1822 in the controlled removal of Strapping machines asbestos-containing materials (ACM). BS EN 415-8 deals with safety requirements for machine design, NEW STANDARD construction, installation, commissioning, operation, adjustment, • A4 Loose-leaf/PDF • 20 pages maintenance and cleaning of strapping machines. • ISBN 0 580 64550 1 • BSI order ref BS 8520-3 BS EN 415-8 applies to the following groups of machines: • Powered hand strapping tools Price £84*, Member Price £42 • Semi-automatic strapping machines • Automatic strapping machines Risk Management of Machinery and Work Equipment • Horizontal pallet strapping machines John Glover • Vertical pallet strapping machines. Understanding the legislation, Directives and standards that apply POPULAR STANDARD to machinery and work equipment can be a difficult task. If your • A4 Loose-leaf/PDF • 78 pages • ISBN 978 0 580 54754 6 organization uses or supplies machinery as part of its operations, you’ll need a clear understanding of what’s required for legal • BSI order ref BS EN 415-8 compliance. Price £186*, Member Price £93 Combining all the relevant information needed to manage the risks associated with machinery, this new book is an invaluable guide for the machinery sector. Machine builders and users, whether UK-based or importing machinery into the UK market will find it a must-have reference resource. NEW BOOK • A5 Paperback • 116 pages • ISBN 978 0 580 67515 7 • BSI order ref BIP 2184 Price £25 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 8 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
  9. 9. Manufacturing Safety BS EN ISO 13850:2008 Safety of machinery. Emergency BS EN 415-6:2006+Amendment1:2009 Safety of stop. Principles for design packaging machines. Pallet wrapping machines BS EN ISO 13850 specifies functional requirements and design BS EN 415-6 deals with safety requirements for machine design, principles for the emergency stop function on machinery, construction, installation, commissioning, operation, adjustment, independent of the type of energy used to control the function. maintenance and cleaning of pallet wrapping machines. It applies to all machinery except for: This standard applies to the following groups of machines: • Machines in which the provision of emergency stop would • pallet banding machines not lessen the risk • stretch film pallet wrapping machines • Hand-held portable machines and hand-guided machines. • stretch film hood application machines • mobile stretch film wrapping machines POPULAR STANDARD • semi automatic self driving stretch film wrapping machines • A4 Loose-leaf/PDF • 16 pages • ISBN 978 0 580 61891 8 • shrink film pallet wrapping machines • shrink film hood application machines • BSI order ref BS EN ISO 13850 • film removing machines Price £86*, Member Price £43 • shrinking systems • sleeve wrapping machines for product greater than 400 mm in one direction • product centralising machines. BS EN ISO 13849-1:2008 Safety of machinery. Safety-related parts of control systems. General POPULAR STANDARD principles for design • A4 Loose-leaf/PDF • 90 pages • ISBN 0 580 62481 0 BS EN ISO 13849-1 provides safety requirements and guidance on • BSI order ref BS EN 415-6 the principles for the design and integration of safety-related parts Price £186*, Member Price £93 of control systems (SRP/CS), including the design of software. For these parts of SRP/CS, it specifies characteristics that include the performance level required for carrying out safety functions. It applies to SRP/CS, regardless of the type of technology and energy BS EN 415-7:2006+Amendment1:2008 Safety of packaging used (electrical, hydraulic, pneumatic, mechanical, etc.), for all machines. Group and secondary packaging machines kinds of machinery. This standard applies to group and secondary packaging machines POPULAR STANDARD and the collating systems associated with them. • A4 Loose-leaf/PDF • 100 pages • ISBN 0 580 61834 5 It deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance • BSI order ref BS EN ISO 13849-1 and cleaning of group and secondary packaging machines. Price £180*, Member Price £90 POPULAR STANDARD • A4 Loose-leaf/PDF • 108 pages BS EN 415-5:2006+Amendment1:2009 Safety of • ISBN 0 580 65666 8 • BSI order ref BS EN 415-7 packaging machines. Wrapping machines Price £196*, Member Price £98 This European standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of wrapping machines. BS EN 614-1:2006+Amendment1:2009 Safety of Wrapping machines are used extensively in Europe, in an machinery. Ergonomic design principles. Terminology increasingly wide range of industries. They contain several significant hazards and have the potential to cause serious injury. and general principles BS EN 614-1 applies to the interactions between operators and POPULAR STANDARD machinery when installing, operating, adjusting, maintaining, cleaning, dismantling, repairing or transporting equipment, and • A4 Loose-leaf/PDF • 102 pages • ISBN 0 580 62480 3 outlines the principles to be followed in taking the health, safety • BSI order ref BS EN 415-5 and well-being of the operator into account. Price £196*, Member Price £98 POPULAR STANDARD • A4 Loose-leaf/PDF • 28 pages • ISBN 0 580 62346 2 • BSI order ref BS EN 614-1 Price £120*, Member Price £60 *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/hsstandards 9 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
  10. 10. Manufacturing Safety BS EN 14656:2006 Safety of machinery. Safety CE Marking for Machinery. A guide to the European Directive requirements for extrusion presses for steel and If you design, manufacture or supply machinery then you will need non-ferrous metals the most up to date information for your industry. This new guide covers the essential aspects of the Directive and will help you This standard applies to extrusion presses from the exit side of assess the implications for your products and decide what action is the heater through associated handling, cooling and quenching necessary. equipment including, e.g. the puller, the hot saw, the run-out table, the stretcher, the cold saw, cold saw table and/or coiler CE Marking for Machinery has been produced for all those involved when incorporated into the equipment, to a point where the with the supply, manufacture, refurbishing or purchasing of extruded product is passed to associated finishing equipment. machinery. It gives practical advice on how to self-certify and CE mark products falling within the scope of the Machinery Directive. It specifies the health and safety requirements at all stages in Designed to act as a one-stop-reference source, the guide is a the life of the equipment, its design, ordering, construction, use convenient and easy to read way to understand the new legislation and disposal. relating to machinery safety regulations, together with their POPULAR STANDARD interface with European Harmonised Standards (ENs). • A4 Loose-leaf/PDF • 48 pages • ISBN 0 580 49493 4 This important reference guide offers you: • A clear and concise overview of the European Machinery Directive • BSI order ref BS EN 14656 • All the information you need in one place - including a full copy of the Price £162*, Member Price £81 Machinery Directive 2006/42/EC • Comprehensive content compiled by industry experts • Guidance on the requirements for manufacturers and suppliers of machinery • Quarterly updates to keep you informed of important changes PD 5304:2005 Guidance on safe use of machinery PD 5304 Guidance on safe use of machinery covers the safe use ANNUAL SUBSCRIPTION PRODUCT of machinery and provides comprehensive guidance on practical • A4 Loose-leaf with binder • ISBN 0 580 50968 1 • BSI order ref TH 42073 measures and techniques that may be applied to machinery so Price £225* as to safeguard operators, maintenance personnel and others. The guidelines deal with issues ranging from selection of protective measures and safeguards through to practical examples of guard design and their application. BS EN ISO 11161:2007 Safety of machinery. Integrated manufacturing systems. Basic requirements PUBLISHED DOCUMENT BS EN ISO 11161 is an international standard that specifies the • A4 Loose-leaf/PDF • 218 pages safety requirements for integrated manufacturing systems (IMS) • ISBN 0 580 46818 6 • BSI order ref PD 5304 that incorporate two or more interconnected machines for specific Price £230* applications, such as component manufacturing or assembly. It gives requirements and recommendations for the safe design, safeguarding and information for the use of such IMSs. BS EN 60204-1:2006+Amendment1:2009 Safety of POPULAR STANDARD machinery. Electrical equipment of machines. General • A4 Loose-leaf/PDF • 50 pages requirements • ISBN 0 580 52925 2 • BSI order ref BS EN ISO 11161 BS EN 60204-1 provides requirements and recommendations Price £162*, Member Price £81 relating to the electrical equipment of machines so as to promote: • safety of persons and property • consistency of control response BS EN ISO 12100-1:2003+Amendment1:2009 Safety of • ease of maintenance. machinery. Basic concepts, general principles for design. It applies to electrical, electronic and programmable electronic Basic terminology, methodology equipment and systems to machines not portable by hand while working, including a group of machines working together in a The concept of safety of machinery considers the ability of a co-ordinated manner. machine to perform its intended function(s) during its lifecycle where risk has been adequately reduced. POPULAR STANDARD BS EN ISO 12100-1 defines basic terminology and methodology • A4 Loose-leaf/PDF • 128 pages • ISBN 0 580 61903 8 used in achieving safety of machinery. • BSI order ref BS EN 60204-1 AMENDED STANDARD Price £206*, Member Price £103 • A4 Loose-leaf/PDF • 46 pages • ISBN 0 580 68672 6 • BSI order ref BS EN ISO 12100-1 BS EN ISO 14121-1:2007 Safety of machinery. Price £158*, Member Price £79 Risk assessment. Principles BS EN ISO 14121-1 provides guidance on the information that will be required to enable risk assessment to be carried out. Procedures are described for identifying hazards and estimating and evaluating risk. POPULAR STANDARD • A4 Loose-leaf/PDF • 42 pages • ISBN 0 580 54530 6 • BSI order ref BS EN ISO 14121 Price £142*, Member Price £71 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 10 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
  11. 11. Manufacturing Safety BS EN ISO 12100-2:2003+Amendment1:2009 Safety of BS EN ISO 11161:2007 Safety of machinery. Integrated machinery. Basic concepts, general principles for design. manufacturing systems. Basic requirements Technical principles BS EN ISO 11161 is an international standard that specifies the The primary purpose of ISO 12100 is to provide designers with safety requirements for integrated manufacturing systems (IMS) an overall framework and guidance to enable them to produce that incorporate two or more interconnected machines for specific machines that are safe for their intended use. It also provides applications, such as component manufacturing or assembly. It a strategy for standard makers. gives requirements and recommendations for the safe design, safeguarding and information for the use of such IMSs. AMENDED STANDARD POPULAR STANDARD • A4 Loose-leaf/PDF • 48 pages • A4 Loose-leaf/PDF • 50 pages • ISBN 0 580 68673 3 • BSI order ref BS EN ISO 12100-2 • ISBN 0 580 52925 2 • BSI order ref BS EN ISO 11161 Price £158*, Member Price £79 Price £162*, Member Price £81 Construction Safety BS 7121 Code of practice for safe use of cranes Title ISBN Price* Member Price BS 7121-1:2006 Code of practice for safe use of cranes. General 0 580 47825 4 £186 £93 BS 7121-2:2003 Code of practice for safe use of cranes. Inspection, testing and examination 0 580 41371 3 £172 £86 BS 7121-3:2000 Code of practice for safe use of cranes. Mobile cranes 0 580 33158 X £142 £71 BS 7121-4:1997 Code of practice for safe use of cranes. Lorry loaders 0 580 27121 8 £124 £62 BS 7121-5:2006 Code of practice for safe use of cranes. Tower cranes 0 580 48129 8 £196 £98 BS 7121-11:1998 Code of practice for safe use of cranes. Offshore cranes 0 580 29503 6 £86 £43 BS 7121-12:1999 Code of practice for safe use of cranes. Recovery vehicles and equipment. Code of practice 0 580 28259 7 £70 £35 BS 7121-13:2009 Code of practice for safe use of cranes. Hydraulic gantry lifting systems 0 580 68410 4 £168 £84 BS 7121-14:2005 Code of practice for safe use of cranes. Side boom pipelayers 0 580 46753 8 £124 £62 BS 7212:2006 Code of practice for the safe use of BS 8454:2006 Code of practice for delivery of training construction hoists and education for work at height and rescue This British standard gives recommendations and guidance Whether you’re simply carrying out inspections, arranging for on the installation, maintenance, examination and operation contractors to undertake works or managing the premises day to of construction hoists, including hoistway protection, and on day you need to be familiar with the Work at Height Regulations the management of these activities. 2005, Regulation 5. BSI has worked along side the Health and It also includes recommendations and guidance on erection, Safety Executive (HSE) to publish BS 8454. alteration and dismantling of hoists and sets out the responsibilities This British standard gives recommendations and guidance of the various parties involved in all these activities. on the delivery of training and education for work at height, including rescue. It is applicable to all related training and POPULAR STANDARD education, including training involving practical experience • A4 Loose-leaf/PDF • 72 pages • ISBN 0 580 48249 9 of a work method or experience of exposure to height. • BSI order ref BS 7212 POPULAR STANDARD Price £186*, Member Price £93 • A4 Loose-leaf/PDF • 30 pages • ISBN 0 580 48250 2 • BSI order ref BS 8454 Price £124*, Member Price £62 *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/hsstandards 11 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.

×