• Share
  • Email
  • Embed
  • Like
  • Save
  • Private Content
2010 Eurocodes Brochure
 

2010 Eurocodes Brochure

on

  • 3,287 views

 

Statistics

Views

Total Views
3,287
Views on SlideShare
3,287
Embed Views
0

Actions

Likes
2
Downloads
113
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

    2010 Eurocodes Brochure 2010 Eurocodes Brochure Document Transcript

    • http://shop.bsigroup.com/Eurocodes Basis of structural design Action on structures Design of concrete structures Design of steel structures Design on composite steel and concrete structures Design of timber structures Design of masonry structures Geotechnical design Design of structures for earthquake resistance Design of aluminium structures British Standards replaced by Eurocodes 2010 An essential guide to the Eurocodes structural Eurocodes raising standards worldwide ™
    • Structural Design Eurocodes The Eurocodes are seen as leading the way in structural codes. Their flexibility enables adoption and use not only within Europe, but internationally. This feature has been recognized by several countries outside Europe and they are already committed to adopting Eurocodes. The primary objectives of the Eurocodes are to: • Provide common design criteria and methods of meeting necessary requirements for mechanical resistance, stability and resistance to fire, including aspects of durability and economy • Provide a common understanding regarding the design of structures between owners, operators and users, designers, contractors and manufacturers of construction products • Facilitate the marketing and use of structural components and kits in EU Members States • Facilitate the marketing and use of materials and constituent products, the properties of which enter into design calculations • Be a common basis for research and development, in the construction industry • Allow the preparation of common design aids and software • Increase the competitiveness of the European civil engineering firms, contractors, designers and product manufacturers in their global activities. Contents The Eurocodes comprehensively cover all principal construction materials. They are structured and located in this brochure as follows: Base Eurocode Eurocode 6 Series Basis of structural design Page 3 Design of masonry structures Page 13 Eurocode 1 Series Eurocode 7 Series Action on structures Page 3 Geotechnical design Page 14 Eurocode 2 Series Eurocode 8 Series Design of concrete structures Page 6 Design of structures for earthquake resistance Page 15 Eurocode 3 Series Design of steel structures Page 7 Eurocode 9 Series Design of aluminium structures Page 16 Eurocode 4 Series Design on composite steel and British Standards concrete structures Page 11 replaced by Eurocodes Page 18 Eurocode 5 Series Design of timber structures Page 12 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 2 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Base Eurocode Basis of structural design Basis of structural design is the lead document in the Eurocode suite. It describes the principles and requirements for safety, serviceability and durability. It also provides the basis and general principles for the structural design and verification of buildings and civil engineering works (including geotechnical aspects). It is the first operational 'material-independent' design code. BS EN 1990:2002 should be used in conjunction with all the other Eurocodes (BS EN 1991 to BS EN 1999) for design. BS EN 1990:2002 Eurocode. Basis of structural design NEW EUROCODES MANAGED COLLECTION BS EN 1990 describes the principles and requirements for safety, serviceability and durability of structures, the basis for their design and verification and gives guidelines for related aspects of structural reliability. It is based on the limit state concept used in conjunction with a partial factor method. The full set of Eurocodes, UK National Annexes ESSENTIAL DOCUMENT and related documents cost over £6000. • A4 Loose-leaf/PDF • 118 pages • Published by BSI BSOL offers access to all Eurocodes and related documents for • ISBN 0 580 40186 3 • BSI order ref BS EN 1990:2002 only £1950 for BSI members and £2950 for non-members. Price £196*, Member Price £98 • Tender for European projects • Get new contracts UK National Annex to BS EN 1990:2002 • Use the Eurocodes • A4 Loose-leaf/PDF • 10 pages • Published by BSI • ISBN 0 580 44890 8 • BSI order ref NA to BS EN 1990:2002 Find out more and get a demo Price £40*, Member Price £20 http://shop.bsigroup.com/bsol Eurocode 1 Series Actions on structures Eurocode 1 Actions on structures provides information on all actions that should normally be considered in the design of buildings and civil engineering works. It is in four main parts. The first part is divided into seven sub-parts which cover densities, self-weight and imposed loads; actions due to fire; snow; wind; thermal actions; loads during execution and accidental actions. The remaining three parts cover traffic loads on bridges, actions by cranes and machinery and actions in silos and tanks. BS EN 1991-1-1:2002 Eurocode 1. Actions on structures. BS EN 1991-1-2:2002 Eurocode 1. Actions on structures. General actions. Densities, self-weight, imposed loads Actions on structures exposed to fire for buildings The methods given in this part of BS EN 1991 are BS EN 1991-1-1 gives design guidance and actions for the applicable to buildings, with a fire load related to the structural design of buildings and civil engineering works building and its occupancy. BS EN 1991-1-2 also deals including some geotechnical aspects for the following subjects: with thermal and mechanical actions on structures exposed • Densities of construction materials and stored materials to fire, and thermal actions related to nominal and physically • Self-weight of construction works based thermal actions. • Imposed loads for buildings. • A4 Loose-leaf/PDF • 62 pages • Published by BSI • A4 Loose-leaf/PDF • 50 pages • Published by BSI • ISBN 0 580 40831 0 • BSI order ref BS EN 1991-1-2:2002 • ISBN 0 580 43575 X • BSI order ref BS EN 1991-1-1:2002 Price £168*, Member Price £84 Price £162*, Member Price £81 UK National Annex to BS EN 1991-1-2:2002 UK National Annex to BS EN 1991-1-1:2002 • A4 Loose-leaf/PDF • 10 pages • Published by BSI • A4 Loose-leaf/PDF • 16 pages • Published by BSI • ISBN 978 0 580 50603 1 • BSI order ref NA to BS EN 1991-1-2:2002 • ISBN 0 580 47335 X • BSI order ref NA to BS EN 1991-1-1:2002 Price £40*, Member Price £20 Price £86*, Member Price £43 *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/Eurocodes 3 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 1 Series Actions on structures BS EN 1991-1-5:2003 Eurocode 1. Actions on structures. PD 6688-1-2 Background paper to the UK National General actions. Thermal actions Annex to BS EN 1991-1-2 BS EN 1991-1-5 gives design guidance for thermal • A4 Loose-leaf/PDF • 22 pages • Published by BSI actions arising from climatic and operational conditions • ISBN 978 80 50604 8 • BSI order ref PD 6688-1-2 on buildings and civil engineering works. Price £86*, Member Price £43 BS EN 1991-1-3:2003 Eurocode 1. Actions on structures. General actions. Snow loads • A4 Loose-leaf/PDF • 52 pages • Published by BSI BS EN 1991-1-3 provides guidance for the calculation of: • ISBN 0 580 43011 1 • BSI order ref BS EN 1991-1-5:2003 • Snow loads on roofs which occur in calm or windy conditions Price £172*, Member Price £86 • Loads imposed by snow sliding down a pitched roof on to snow guards and other obstacles • Loads due to snow overhanging the cantilevered edge UK National Annex to BS EN 1991-1-5:2003 of a roof • A4 Loose-leaf/PDF • 16 pages • Published by BSI • Snow loads on bridges. • ISBN 978 0 580 50575 1 • BSI order ref NA to BS EN 1991-1-5:2003 This standard applies to new buildings and structures and to Price £86*, Member Price £43 significant alterations to existing buildings and structures. • A4 Loose-leaf/PDF • 62 pages • Published by BSI • ISBN 0 580 42307 7 • BSI order ref BS EN 1991-1-3:2003 BS EN 1991-1-6:2005 Eurocode 1. Actions on structures. Price £168*, Member Price £84 General actions. Actions during execution BS EN 1991-1-6 describes principles and application rules for the UK National Annex to BS EN 1991-1-3:2003 determination of actions to be considered during execution of • A4 Loose-leaf/PDF • 14 pages • Published by BSI buildings and civil engineering works. • ISBN 0 580 47334 1 • BSI order ref NA to BS EN 1991-1-3:2003 Price £70*, Member Price £35 • A4 Loose-leaf/PDF • 34 pages • Published by BSI BS EN 1991-1-4:2005 Eurocode 1. Actions on structures. • ISBN 0 580 46784 8 • BSI order ref BS EN 1991-1-6 General actions. Wind actions Price £142*, Member Price £71 BS EN 1991-1-4 gives design guidance and actions for the structural design of buildings and civil engineering works for wind. This includes the whole structure or parts of the structure UK National Annex to BS EN 1991-1-6:2005 or elements attached to the structure, e. g. components, cladding • A4 Loose-leaf/PDF • 10 pages • Published by BSI units and their fixings, safety and noise barriers. This part is • ISBN 0 580 60815 5 • BSI order ref NA to BS EN 1991-1-6:2005 intended to predict characteristic wind actions on land-based structures, their components and appendages. Price £42*, Member Price £21 • A4 Loose-leaf/PDF • 152 pages • Published by BSI • ISBN 0 580 45959 4 • BSI order ref BS EN 1991-1-4:2005 Price £234*, Member Price £117 FREE DOWNLOAD UK National Annex to BS EN 1991-1-4:2005 BSI Structural Eurocodes • A4 Loose-leaf/PDF • 40 pages • Published by BSI Companion • ISBN 978 0 580 63621 9 • BSI order ref NA to BS EN 1991-1-4:2005 Price £142*, Member Price £71 This essential guide contains articles from leading academics and professionals to help you gain an understanding of the nature of the new codes. It will ease your integration into the new approach. Download your free copy at http://shop.bsigroup.com/bip2159 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 4 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 1 Series Actions on structures BS EN 1991-1-7:2006 Eurocode 1. Actions on structures. BS EN 1991-3:2006 Eurocode 1. Actions on structures. General actions. Accidental actions Actions induced by cranes and machines BS EN 1991-1-7 describes principles and application rules for BS EN 1991-3 gives design guidance and actions for the the assessment of accidental actions on buildings and bridges. structural design of buildings and civil engineering works, The following actions are included: including the following aspects: • Impact forces from vehicles, rail traffic, ships and helicopters • Actions induced by cranes • Actions due to internal explosions • Actions induced by machinery. • Actions due to local failure from an unspecified cause. • A4 Loose-leaf/PDF • 70 pages • Published by BSI • A4 Loose-leaf/PDF • 52 pages • Published by BSI • ISBN 0 580 48259 6 • BSI order ref BS EN 1991-1-7:2006 • ISBN 0 580 48268 5 • BSI order ref BS EN 1991-3:2006 Price £172*, Member Price £86 Price £172*, Member Price £86 UK National Annex to BS EN 1991-1-7:2006 UK National Annex to BS EN 1991-3:2006 • A4 Loose-leaf/PDF • 18 pages • Published by BSI • A4 Loose-leaf/PDF • 8 pages • Published by BSI • ISBN 978 0 580 65468 8 • BSI order ref NA to BS EN 1991-1-7:2006 • ISBN 0 580 67719 9 • BSI order ref NA to BS EN 1991-3:2006 Price £86*, Member Price £43 Price £40*, Member Price £20 PD 6688-1-7:2009 Recommendations for the design of structures to BS EN 1991-1-7 BS EN 1991-4:2006 Eurocode 1. Actions on structures. • A4 Loose-leaf/PDF • 20 pages • Published by BSI Silos and tanks • ISBN 0 580 53003 6 • BSI order ref PD 6688-1-7 BS EN 1991-4 gives design guidance for the assessment of actions for the structural design of silos and tanks. It also Price £86*, Member Price £43 includes some provisions for actions on silo and tank structures that are not only associated with the stored solids or liquids – e.g. the effects of thermal differentials, aspects of the differential settlements of batteries of silos. BS EN 1991-2:2003 Eurocode 1. Actions on structures. Traffic loads on bridges BS EN 1991-2 defines models of traffic loads for the design of • A4 Loose-leaf/PDF • 112 pages • Published by BSI road bridges, footbridges and railway bridges. For the design of new bridges, BS EN 1991 is intended to be used for direct • ISBN 0 580 48260 X • BSI order ref BS EN 1991-4:2006 application, together with Eurocodes BS EN 1990 to BS EN 1999. Price £196*, Member Price £98 PD 6688-1-4:2009 Background information to the National Annex to BS EN 1991-1-4 and additional guidance • A4 Loose-leaf/PDF • 60 pages • Published by BSI • A4 Loose-leaf/PDF • 170 pages • Published by BSI • ISBN 0 580 58273 8 • BSI order ref PD 6688-1-4 • ISBN 0 580 42879 6 • BSI order ref BS EN 1991-2:2003 Price £168*, Member Price £84 Price £234*, Member Price £117 UK National Annex to BS EN 1991-2:2003 • A4 Loose-leaf/PDF • 52 pages • Published by BSI • ISBN 0 580 63216 7 • BSI order ref NA to BS EN 1991-2:2003 Price £172*, Member Price £86 FREE DOWNLOAD Construction brochure Download the latest Construction BSI MEMBERSHIP and built environment brochure at Standards are recognized as a powerful business tool and can define http://shop.bsigroup.com/constructionstandards crucial aspects of a company's safety, quality and reliability. They also enable businesses to operate in a global market. Become a BSI member to get 50% off British Standards Visit www.bsimembers.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/Eurocodes 5 DVDs, other electronic products and Conferences and Training Courses. All prices,content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 2 Series Design of concrete structures Eurocode 2 Design of concrete structures is concerned with the requirements for resistance, serviceability, durability and fire resistance of concrete structures. It applies to the design of buildings and civil engineering works in plain, reinforced and prestressed concrete. BS EN 1992-1-1:2004 Eurocode 2. Design of concrete BS EN 1992-1-2:2004 Eurocode 2. Design of concrete structures. General rules and rules for buildings structures. General rules. Structural fire design BS EN 1992-1-1:2004 gives a general basis for the design of BS EN 1992-1-2 deals with the design of concrete structures for structures in plain, reinforced and prestressed concrete made the accidental situation of fire exposure and is intended to be with normal and light weight aggregates together with specific used in conjunction with BS EN 1992-1-1 and BS EN 1991-1-2. rules for buildings. BS EN 1992-1-2 identifies differences from, or supplements to, normal temperature design, and with passive methods of fire protection. • A4 Loose-leaf/PDF • 230 pages • Published by BSI • A4 Loose-leaf/PDF • 100 pages • Published by BSI • ISBN 0 580 45191 7 • BSI order ref BS EN 1992-1-1:2004 • ISBN 0 580 45414 2 • BSI order ref BS EN 1992-1-2:2004 Price £256*, Member Price £128 Price £186*, Member Price £93 UK National Annex to BS EN 1992-1-1:2004 UK National Annex to BS EN 1992-1-2:2004 • A4 Loose-leaf/PDF • 26 pages • Published by BSI • A4 Loose-leaf/PDF • 6 pages • Published by BSI • ISBN 0 580 47244 2 • BSI order ref NA For BS EN 1992-1-1:2004 • ISBN 0 580 47245 0 • BSI order ref NA to BS EN 1992-1-2:2004 Price £124*, Member Price £62 Price £40*, Member Price £20 PD 6687:2006 Background paper to the UK National BS EN 1992-2:2005 Eurocode 2. Design of concrete Annexes to BS EN 1992-1 structures. Concrete bridges. Design and detailing rules • A4 Loose-leaf/PDF • 34 pages • Published by BSI BS EN 1992-2 describes the principles and requirements for • ISBN 0 580 47942 0 • BSI order ref PD 6687:2006 safety, serviceability and durability of concrete structures, Price £142*, Member Price £71 together with specific provisions for bridges. It is based on the limit state concept used in conjunction with a partial factor method. BS EN 1992-3:2006 Eurocode 2. Design of concrete structures. Liquid retaining and containing structures BS EN 1992-3 covers additional rules to those in Part 1 for the design of structures constructed from plain or lightly • A4 Loose-leaf/PDF • 100 pages • Published by BSI reinforced concrete, reinforced concrete or prestressed concrete • ISBN 0 580 46576 4 • BSI order ref BS EN 1992-2:2005 that contain liquids or granular solids. Price £186*, Member Price £93 Principles and application rules are given in this part for the design of those elements of structure which directly support the UK National Annex to BS EN 1992-2:2005 stored liquids or materials. • A4 Loose-leaf/PDF • 20 Pages • Published by BSI • ISBN 0 580 60961 9 • BSI order ref NA to BS EN 1992-2:2005 • A4 Loose-leaf/PDF • 28 pages • Published by BSI Price £86*, Member Price £43 • ISBN 0 580 48267 7 • BSI order ref BS EN 1992-3:2006 Price £124*, Member Price £62 PD 6687-2:2008 Recommendations for the design of UK National Annex to BS EN 1992-3:2006 structures to BS EN 1992-2:2005 • A4 Loose-leaf/PDF • 8 Pages • Published by BSI • A4 Loose-leaf/PDF • 36 pages • Published by BSI • ISBN 978 0 580 53548 2 • BSI order ref NA to BS EN 1992-3:2006 • ISBN 0 580 58681 1 • BSI order ref PD 6687-2:2008 Price £40*, Member Price £20 Price £142*, Member Price £71 BS EN 13670:2009 Execution of concrete structures BS EN 13670 gives common requirements for execution of concrete structures, it applies to both in-situ works and construction using prefabricated concrete elements. • A4 Loose-leaf/PDF • 76 pages • Published by BSI • ISBN 0 580 67067 1 • BSI order ref BS EN 13670:2009 Price £186*, Member Price £93 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 6 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 3 Series Design of steel structures Eurocode 3 Design of streel structures has a much wider scope than most of the other design Eurocodes due to the diversity of steel structures, the need to cover both bolted and welded joints, and the possible slenderness of construction. The real differences when compared to existing British standards lie in bringing new methods into the scope. For example, the design of semi-rigid joints in buildings is explained, and more advanced methods of design for cold-formed steelwork are included. The rules for shell and for the design of piles, sheet piling and silos are new, and rules for stainless steel appear for the first time. BS EN 1993-1-1:2005 Eurocode 3 Design of steel BS EN 1993-1-3:2006 Eurocode 3. Design of steel structures. General rules and rules for buildings structures. General rules. Supplementary rules for BS EN 1993-1-1 gives basic design rules for steel structures cold-formed members and sheeting with material thicknesses of 3mm. It also gives supplementary BS EN 1993-1-3 gives design requirements for cold-formed thin provisions for the structural design of steel buildings. gauge members and sheeting. It applies to cold-formed steel products made from coated or uncoated thin gauge hot or cold rolled sheet or strip, that have been cold-formed by such processes as cold-rolled forming or press-braking. BS EN 1993-1-3 may also be used for the design of profiled steel sheeting for composite steel and concrete slabs at the construction stage – see BS EN 1994. • A4 Loose-leaf/PDF • 96 pages • Published by BSI • ISBN 0 580 46078 9 • BSI order ref BS EN 1993-1-1:2005 • A4 Loose-leaf/PDF • 134 pages • Published by BSI Price £186*, Member Price £93 • ISBN 0 580 49665 1 • BSI order ref BS EN 1993-1-3:2006 UK National Annex to BS EN 1993-1-1:2005 Price £224*, Member Price £112 • A4 Loose-leaf/PDF • 12 pages • Published by BSI • ISBN 978 0 580 54960 1 • BSI order ref NA to BS EN 1993-1-1:2005 UK National Annex to BS EN 1993-1-3:2006 Price £70*, Member Price £35 • A4 Loose-leaf/PDF • 12 pages • Published by BSI • ISBN 0 580 54962 5 • BSI order ref NA to BS EN 1993-1-3:2006 Price £68*, Member Price £34 BS EN 1993-1-2:2005 Eurocode 3. Design of steel structures. General rules. Structural fire design BS EN 1993-1-2 describes the principles, requirements and BS EN 1993-1-4:2006 Eurocode 3. Design of steel rules for the structural design of steel buildings exposed to structures. General rules. Supplementary rules for fire, including the following aspects: stainless steels • Design of steel structures for accidental exposure to fire BS EN 1993-1-4 gives supplementary provisions for the design • Passive methods of fire protection of buildings and civil engineering works that extend and modify • Applies to steel structures that are required to fulfil this load the application of BS EN 1993-1-1, BS EN 1993-1-3, bearing function, avoiding premature collapse due to fire BS EN 1993-1-5 and BS EN 1993-1-8 to austenitic, austenitic- • Gives principles and application rules for designing structures ferritic and ferritic stainless steels. for specified requirements in respect of the load bearing function and the levels of performance. • A4 Loose-leaf/PDF • 86 pages • Published by BSI • A4 Loose-leaf/PDF • 38 pages • Published by BSI • ISBN 0 580 45974 8 • BSI order ref BS EN 1993-1-2:2005 • ISBN 0 580 49666 X • BSI order ref BS EN 1993-1-4:2006 Price £186*, Member Price £93 Price £142*, Member Price £71 UK National Annex to BS EN 1993-1-2:2005 UK National Annex to BS EN 1993-1-4:2006 • A4 Loose-leaf/PDF • 6 pages • Published by BSI • A4 Loose-leaf/PDF • 10 pages • Published by BSI • ISBN 978 0 580 54961 8 • BSI order ref NA to BS EN 1993-1-2:2005 • ISBN 0 580 54963 2 • BSI order ref NA to BS EN 1993-1-4:2006 Price £40*, Member Price £20 Price £40*, Member Price £20 *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/Eurocodes 7 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 3 Series Design of steel structures BS EN 1993-1-5:2006 Eurocode 3. Design of steel BS EN 1993-1-8:2005 Eurocode 3. Design of steel structures. Plated structural elements structures. Design of joints BS EN 1993-1-5 gives design requirements of stiffened and BS EN 1993-1-8 gives design methods for the design of joints unstiffened plates which are subject to inplane forces. Effects subject to predominantly static loading using steel grades S235, due to shear lag, in-plane load introduction and plate buckling S275, S355 and S460. for I-section girders and box girders are covered. Also covered are plated structural components subject to in-plane loads as in tanks and silos. The effects of out-of-plane loading are outside the scope of this document. • A4 Loose-leaf/PDF • 52 pages • Published by BSI • A4 Loose-leaf/PDF • 140 pages • Published by BSI • ISBN 0 580 49667 8 • BSI order ref BS EN 1993-1-5:2006 • ISBN 0 580 46081 9 • BSI order ref BS EN 1993-1-8:2005 Price £172*, Member Price £86 Price £224*, Member Price £112 UK National Annex to BS EN 1993-1-5:2006 UK National Annex to BS EN 1993-1-8:2005 • A4 Loose-leaf/PDF • 10 pages • Published by BSI • A4 Loose-leaf/PDF • 8 pages • Published by BSI • ISBN 0 580 54964 9 • BSI order ref NA to BS EN 1993-1-5:2006 • ISBN 0 580 54969 4 • BSI order ref NA to BS EN 1993-1-8:2005 Price £42*, Member Price £21 Price £40*, Member Price £20 BS EN 1993-1-6:2007 Eurocode 3. Design of steel BS EN 1993-1-9:2005 Eurocode 3. Design of steel structures. Strength and stability of shell structures structures. Fatigue BS EN 1993-1-6 gives basic design rules for plated steel structures that have the form of a shell of revolution. It defines BS EN 1993-1-9 gives methods for the assessment of fatigue the characteristic and design values of the resistance of the resistance of members, connections and joints subjected to structure and is concerned with the requirements for design fatigue loading. against the ultimate limit states of plastic limit; cyclic plasticity; The assessment methods given in this part are applicable to buckling and fatigue. all grades of structural steels, stainless steels and unprotected weathering steels except where noted otherwise in the detail category tables. This part only applies to materials which conform to the toughness requirements of BS EN 1993-1-10. • A4 Loose-leaf/PDF • 98 pages • Published by BSI • ISBN 0 580 50669 7 • BSI order ref BS EN 1993-1-6:2007 • A4 Loose-leaf/PDF • 140 pages • Published by BSI Price £186*, Member Price £93 • ISBN 0 580 46079 7 • BSI order ref BS EN 1993-1-9:2005 A National Annex is not currently planned for BS EN 1993-1-6:2007. Price £142*, Member Price £71 See national foreword for further details. UK National Annex to BS EN 1993-1-9:2005 • A4 Loose-leaf/PDF • 12 pages • Published by BSI BS EN 1993-1-7:2007 Eurocode 3. Design of steel • ISBN 0 580 54971 7 • BSI order ref NA to BS EN 1993-1-9:2005 structures. Plated structures subject to out of plane Price £70*, Member Price £35 loading BS EN 1993-1-7 provides basic design rules for the structural design of unstiffened and stiffened plates which form part of PD 6695-1-9:2008 Recommendations for the design of plated structures such as silos, tanks or containers that are structures to BS EN 1993-1-9 loaded by out of plane actions. • A4 Loose-leaf/PDF • 26 pages • Published by BSI • ISBN 0 580 57643 0 • BSI order ref PD 6695-1-9:2008 Price £124*, Member Price £62 • A4 Loose-leaf/PDF • 40 pages • Published by BSI • ISBN 0 580 53282 5 • BSI order ref BS EN 1993-1-7:2007 Price £142*, Member Price £71 A National Annex is not currently planned for BS EN 1993-1-7:2007. See national foreword for further details. Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 8 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 3 Series Design of steel structures BS EN 1993-1-10:2005 Eurocode 3. Design of steel BS EN 1993-1-12:2007 Eurocode 3. Design of steel structures. Material toughness and through-thickness structures. Additional rules for the extension of EN 1993 properties up to steel grades S 700 BS EN 1993-1-10 contains design guidance for the selection of BS EN 1993-1-12 specifies rules that can be used in conjunction steel for fracture toughness and for through thickness properties with all parts of the Eurocode 3 series to enable structures to be of welded elements where there is a significant risk of lamellar designed with steel grades greater than S460 up to S700. tearing during fabrication. • A4 Loose-leaf/PDF • 22 pages • Published by BSI • 12 pages • Published by BSI • ISBN 0 580 50670 3 • ISBN 0 580 46080 0 • BSI order ref BS EN 1993-1-10:2005 • BSI order ref BS EN 1993-1-12:2007 Price £86*, Member Price £43 Price £70*, Member Price £35 UK National Annex to BS EN 1993-1-10:2005 UK National Annex to BS EN 1993-1-12:2007 • A4 Loose-leaf/PDF • 8 pages • Published by BSI • A4 Loose-leaf/PDF • 6 pages • Published by BSI • ISBN 0 580 54974 8 • BSI order ref NA to BS EN 1993-1-12:2007 • ISBN 0 580 54972 4 • BSI order ref NA to BS EN 1993-1-10:2005 Price £40*, Member Price £20 Price £40*, Member Price £20 PD 6695-1-10:2009 Recommendations for the design of structures to BS EN 1993-1-10 BS EN 1993-2:2006 Eurocode 3. Design of steel • A4 Loose-leaf/PDF • 16 pages • Published by BSI structures. Steel bridges BS EN 1993-2 describes the principles and application rules • ISBN 0 580 59346 8 • BSI order ref PD 6695-1-10 for the safety and serviceability and durability of steel bridges. Price £84*, Member Price £42 It gives design rules that are supplementary to the generic rules in EN 1993-1-1 and is intended to be used with Eurocodes BS EN 1990, BS EN 1991 and part 2 of BS EN 1992 to BS EN 1998 when steel structures or steel components for BS EN 1993-1-11:2006 Eurocode 3. Design of steel bridges are referred to. structures. Design of structures with tension components BS EN 1993-1-11 gives design rules for structures with tension • A4 Loose-leaf/PDF • 106 pages • Published by BSI components made of steel, which, due to their connections with • ISBN 0 580 49664 3 • BSI order ref BS EN 1993-2:2006 the structure, are adjustable and replaceable. Price £196*, Member Price £98 BS EN 1993-1-11 also gives rules for determining the technical requirements for prefabricated tension components for assessing their safety, serviceability and durability. UK National Annex to BS EN 1993-2:2006 • A4 Loose-leaf/PDF • 18 pages • Published by BSI • ISBN 0 580 54975 5 • BSI order ref NA to BS EN 1993-2:2006 Price £86*, Member Price £43 • A4 Loose-leaf/PDF • 38 pages • Published by BSI • ISBN 0 580 49668 6 • BSI order ref BS EN 1993-1-11:2006 Price £142*, Member Price £71 BS EN 1993-3-1:2006 Eurocode 3. Design of steel structures. UK National Annex to BS EN 1993-1-11:2006 Towers, masts and chimneys. Towers and masts • A4 Loose-leaf/PDF • 12 pages • Published by BSI BS EN 1993-3-1 applies to the structural design of lattice towers • ISBN 0 580 54973 1 • BSI order ref NA to BS EN 1993-1-11:2006 and guyed masts and to the structural design of this type of Price £70*, Member Price £35 structures supporting prismatic, cylindrical or other bluff elements. The provisions in BS EN 1993-3-1 supplement those given in BS EN 1993-1. • A4 Loose-leaf/PDF • 82 pages • Published by BSI • ISBN 0 580 54892 5 • BSI order ref BS EN 1993-3-1:2006 Price £186*, Member Price £93 *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/Eurocodes 9 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 3 Series Design of steel structures BS EN 1993-3-2:2006 Eurocode 3. Design of steel BS EN 1993-4-1:2007 Eurocode 3. Design of steel structures. Towers, masts and chimneys. Chimneys structures. Silos BS EN 1993-3-2 applies to the structural design of vertical steel BS EN 1993-4-1 provides principles and application rules for the chimneys of circular or conical section. It covers chimneys that structural design of steel silos of circular or rectangular plan- are cantilevered, supported at intermediate levels or guyed. form, being free standing or supported. The provisions in BS EN 1993-3-2 supplement those given in BS EN 1993-1-1. • A4 Loose-leaf/PDF • 118 pages BS EN 1993-3-2 is concerned only with the requirement for • Published by BSI • ISBN 0 580 50673 4 resistance (strength, stability and fatigue) of steel chimneys. • BSI order ref BS EN 1993-4-1:2007 Price £196*, Member Price £98 • A4 Loose-leaf/PDF • 34 pages • Published by BSI • ISBN 0 580 54894 9 • BSI order ref BS EN 1993-3-2:2006 A National Annex document is not required for BS EN 1993-4-1:2007. See national foreword for further details. Price £142*, Member Price £71 No National Annex planned. BS EN 1993-4-2:2007 Eurocode 3. Design of steel structures. Tanks BS EN 1090-1:2009 Execution of steel structures and BS EN 1993-4-2 provides principles and application rules for the aluminium structures. Requirements for conformity structural design of vertical cylindrical above ground steel tanks for assessment of structural components the storage of liquid products with the following characteristics: BS EN 1090-1 specifies requirements for conformity assessment • Internal pressures above liquid level not less than 100mbar of performance characteristics for structural steel and aluminium and not more than 500mbar components as well as for kits placed on the market as • Design metal temperature in the range of -50 ºC to +300 ºC. construction products. For tanks constructed using austenitic stainless steels, the design metal temperature may be in the range of -165 ºC to • A4 Loose-leaf/PDF • 46 pages +300 ºC. for fatigue loaded tanks, the temperature should be limited to T < 150 ºC • ISBN 0 580 54786 7 • Maximum design liquid level not higher than the top of the • BSI order ref BS EN 13670:2009 cylindrical shell. Price £234*, Member Price £117 • A4 Loose-leaf/PDF • 58 pages • Published by BSI • ISBN 978 0 580 50672 7 • BSI order ref BS EN 1993-4-2:2007 BS EN 1090-2:2008 Execution of steel structures and Price £172*, Member Price £86 aluminium structures. Technical requirements for the A National Annex document is not required for BS EN 1993-4-2:2007. execution of steel structures See national foreword for further details. BS EN 1090-2 specifies requirements for execution of steel structures, to ensure adequate levels of mechanical resistance and stability, serviceability and durability. This standard specifies BS EN 1993-4-3:2007 Eurocode 3. Design of steel requirements for execution of steel structures in particular those structures. Pipelines that are designed according to all parts of BS EN 1993 and the BS EN 1993-4-3 provides principles and application rules for the steel parts of composite steel and concrete structures designed structural design of cylindrical steel pipelines for the transport of according to all parts of BS EN 1994. liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards • A4 Loose-leaf/PDF • 208 pages • ISBN 0 580 55315 8 covering particular applications. Price £234*, Member Price £117 • A4 Loose-leaf/PDF • 44 pages • Published by BSI • ISBN 0 580 50671 0 • BSI order ref BS EN 1993-4-3:2007 PD 6695-2:2008 Recommendations for the design of Price £142*, Member Price £71 bridges to BS EN 1993 • A4 Loose-leaf/PDF • 94 pages • Published by BSI A National Annex document is not required for BS EN 1993-4-3:2007. See national foreword for further details. • ISBN 0 580 61135 3 • BSI order ref PD 6695-2:2008 Price £186*, Member Price £93 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 10 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 3 Series Design of steel structures BS EN 1993-5:2007 Eurocode 3. Design of steel BS EN 1993-6:2007 Eurocode 3. Design of steel structures. Piling structures. Crane supporting structures BS EN 1993-5 provides principles and application rules for the BS EN 1993-6 gives design rules for the structural design of structural design of bearing piles and sheet piles made of steel runway beams and other crane supporting structures. It covers as well as examples of detailing for foundation and retaining overhead crane runway inside buildings and outdoor crane wall structures. runways, including runways for: a) Overhead travelling cranes, either: • supported on top of the runway beams • underslung below the runway beams b) Monorail hoist blocks. • A4 Loose-leaf/PDF • 98 pages • Published by BSI • A4 Loose-leaf/PDF • 40 pages • Published by BSI • ISBN 0 580 50601 7 • BSI order ref BS EN 1993-5:2007 • ISBN 978 0 580 53283 2 • BSI order ref BS EN 1993-6:2007 Price £180*, Member Price £90 Price £142*, Member Price £71 UK National Annex to BS EN 1993-5:2007 UK National Annex to BS EN 1993-5:2007 • A4 Loose-leaf/PDF • 12 pages • Published by BSI • A4 Loose-leaf/PDF • 12 pages • Published by BSI • ISBN 0 580 54979 3 • BSI order ref NA to BS EN 1993-5:2007 • ISBN 0 580 54980 9 • BSI order ref NA to BS EN 1993-6:2007 Price £68*, Member Price £34 Price £68*, Member Price £34 Eurocode 4 Series Design of composite steel and concrete structures Eurocode 4 Design of composite steel and concrete structures applies to the design of composite structures and members for buildings and civil engineering works. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that is given in BS EN 1990:2002. BS EN 1994-1-1:2004 Eurocode 4. Design of composite BS EN 1994-1-2:2005 Eurocode 4. Design of composite steel and concrete structures. General rules and rules steel and concrete structures. General rules. Structural for buildings fire design BS EN 1994-1-1 describes the principles and requirements BS EN 1994-1-2 describes the principles, requirements and rules for safety, serviceability and durability of composite steel for the structural design of buildings exposed to fire, including and concrete structures, together with specific provisions the following aspects: for buildings. It is based on the limit state concept used in • Safety requirements conjunction with a partial factor method. • Design procedures • Design aids. Please note this part only identifies differences from, or supplements to, normal temperature design. • A4 Loose-leaf/PDF • 122 pages • Published by BSI • ISBN 0 580 45569 6 • BSI order ref BS EN 1994-1-1:2004 • A4 Loose-leaf/PDF • 114 pages • Published by BSI Price £190*, Member Price £95 • ISBN 0 580 47235 3 • BSI order ref BS EN 1994-1-2:2005 Price £196*, Member Price £98 UK National Annex to BS EN 1994-1-1:2004 • A4 Loose-leaf/PDF • 8 pages • Published by BSI UK National Annex to BS EN 1994-1-2:2005 • ISBN 978 0 580 54981 6 • BSI order ref NA to BS EN 1994-1-1:2004 • A4 Loose-leaf/PDF • 6 pages • Published by BSI Price £40*, Member Price £20 • ISBN 978 0 580 54982 3 • BSI order ref NA to BS EN 1994-1-2:2005 Price £40*, Member Price £20 *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/Eurocodes 11 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 4 Series Design of composite steel and concrete structures BS EN 1994-2:2005 Eurocode 4. Design of composite steel NEW EUROCODES MANAGED COLLECTION and concrete structures. General rules and rules for bridges BS EN 1994-2 describes the principles and requirements for safety, serviceability and durability of composite steel and concrete structures, together with specific provisions for bridges. It is based on the limit state concept used in conjunction with a partial factor method. The full set of Eurocodes, UK National Annexes and related documents cost over £6000. • A4 Loose-leaf/PDF • 96 pages • Published by BSI BSOL offers access to all Eurocodes and related documents for • ISBN 0 580 46902 6 • BSI order ref BS EN 1994-2:2005 only £1950 for BSI members and £2950 for non-members. Price £186*, Member Price £93 • Tender for European projects • Get new contracts UK National Annex to BS EN 1994-2:2005 • Use the Eurocodes • A4 Loose-leaf/PDF • 8 Pages • Published by BSI • ISBN 0 580 54983 0 • BSI order ref NA to BS EN 1994-2:2005 Find out more and get a demo Price £40*, Member Price £20 http://shop.bsigroup.com/bsol PD 6696-2:2007 Background paper to BS EN 1994-2 and the UK National Annex to BS EN 1994-2. Eurocode 4. Design of composite steel and concrete structures. General rules and rules for bridges • A4 Loose-leaf/PDF • 14 Pages • Published by BSI • ISBN 0 580 46902 6 • BSI order ref PD 6696-2:2007 Price £70*, Member Price £35 Eurocode 5 Series Design of timber structures Eurocode 5 Design of timber structures applies to the design of buildings and civil engineering works in timber (solid timber, sawn, planed or in pole form, glued laminated timber or wood-based structural products) or wood-based panels jointed together with adhesives or mechanical fasteners. It covers the requirements for mechanical resistance, serviceability, durability and fire resistance of timber structures. BS EN 1995-1-1:2004 Eurocode 5. Design of timber BS EN 1995-1-2:2004 Eurocode 5. Design of timber structures. Common rules and rules for buildings structures. General. Structural fire design BS EN 1995-1-1 applies to the design of buildings and civil BS EN 1995-1-2 applies to the design of buildings and civil engineering works in timber (solid timber, sawn, planed or in engineering works in timber (solid timber, sawn, planed or in pole form, glued laminated timber or wood-based structural pole form, glued laminated timber or wood-based structural products, e.g. LVL) or wood-based panels jointed together with products e.g. LVL) or wood-based panels jointed together with adhesives or mechanical fasteners. adhesives or mechanical fasteners. • A4 Loose-leaf/PDF • 128 pages • Published by BSI • A4 Loose-leaf/PDF • 76 pages • Published by BSI • ISBN 0 580 45147 X • BSI order ref BS EN 1995-1-1:2004 • ISBN 0 580 45148 8 • BSI order ref BS EN 1995-1-2:2004 Price £206*, Member Price £103 Price £180*, Member Price £90 UK National Annex to UK National Annex to BS EN 1995-1-2:2004 BS EN 1995-1-1:2004+Amendment1:2008 • A4 Loose-leaf/PDF • 10 pages • Published by BSI • A4 Loose-leaf/PDF • 12 pages • Published by BSI • ISBN 0 580 49350 4 • BSI order ref NA to BS EN 1995-1-2:2004 • ISBN 0 580 65038 3 • BSI order ref NA For BS EN 1995-1-1:2004 Price £40*, Member Price £20 Price £68*, Member Price £34 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 12 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 5 Series Design of timber structures BS EN 1995-2:2004 Eurocode 5. Design of timber SIGN UP TO FREE E-NEWSLETTERS structures. Bridges BS EN 1995-2 gives general design rules for the structural parts of bridges, i.e. structural members of importance for the reliability of the whole bridge or major parts of it, made of timber or other wood-based materials, either singly or compositely with concrete, steel or other materials. • A4 Loose-leaf/PDF • 32 pages • Published by BSI • ISBN 0 580 40149 6 • BSI order ref BS EN 1995-2:2004 Price £124*, Member Price £62 To keep up-to-date with the latest developments in construction and Eurocodes, sign up to receive our sector-specific newsletters at UK National Annex to BS EN 1995-2:2004 • A4 Loose-leaf/PDF • 10 pages • Published by BSI Visit http://shop.bsigroup.com/newsletters • ISBN 0 580 49351 2 • BSI order ref BS EN 1995-2:2004 Price £40*, Member Price £20 Eurocode 6 Series Design of masonry structures Eurocode 6 Design of masonry structures relates to buildings and other civil engineering works, and covers reinforced, prestressed and confined masonry. The four parts cover the rules for reinforced and unreinforced masonry, structural fire design and detailed rules for lateral loading. They code deals with specific aspects of passive fire protection in terms of designing structures and parts for adequate load bearing resistance that could be needed for safe evacuation of occupants and fire rescue and for limiting fire spread. This Eurocode also applies to the design of buildings and civil engineering works, or parts in unreinforced, reinforced, prestressed and confined masonry. It outlines the requirements for resistance, serviceability and durability of structures. BS EN 1996-1-1:2005 Eurocode 6. Design of masonry BS EN 1996-1-2:2005 Eurocode 6. Design of masonry structures. General rules for reinforced and structures. General rules. Structural fire design unreinforced masonry structures BS EN 1996-1-2 deals with the design of masonry structures for BS EN 1996-1-1 deals with unreinforced masonry and reinforced the accidental situation of fire exposure and is intended to be masonry where the reinforcement is added to provide ductility, used in conjunction with other relevant Eurocodes. This part only strength or improve serviceability. The principles of the design identifies differences from, or supplements to, normal of prestressed masonry and confined masonry are given, but temperature design. application rules are not provided. • A4 Loose-leaf/PDF • 84 pages • Published by BSI • A4 Loose-leaf/PDF • 18 pages • Published by BSI • ISBN 0 580 46334 6 • BSI order ref BS EN 1996-1-2:2005 • ISBN 0 580 46719 8 • BSI order ref BS EN 1996-1-1:2005 Price £186*, Member Price £93 Price £212*, Member Price £106 UK National Annex to BS EN 1996-1-2:2005 UK National Annex to BS EN 1996-1-1:2005 • A4 Loose-leaf/PDF • 18 pages • Published by BSI • A4 Loose-leaf/PDF • 128 pages • Published by BSI • ISBN 0 580 59808 1 • BSI order ref NA to BS EN 1996-1-2:2005 • ISBN 978 0 580 50753 3 • BSI order ref NA to BS EN 1996-1-1:2005 Price £86*, Member Price £43 Price £86*, Member Price £43 *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/Eurocodes 13 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 6 Series Design of masonry structures BS EN 1996-2:2006 Eurocode 6. Design of masonry BS EN 1996-3:2006 Eurocode 6. Design of masonry structures. Design considerations, selection of materials structures. Simplified calculation methods and simple and execution of masonry rules for masonry structures BS EN 1996-2 gives basic rules for the selection of materials and BS EN 1996-3 provides simplified calculation methods to execution of masonry to comply with the design assumptions of facilitate the design of the following unreinforced masonry the other parts of Eurocode 6. With a few exceptions this walls, subject to certain conditions of application: standard deals with the ordinary aspects of masonry design • Walls subjected to vertical loading and wind loading and execution including: • Walls subjected to concentrated loads • The selection of masonry materials • Shear walls • Factors affecting the performance and durability of masonry • Basement walls subjected to lateral earth pressure and • Resistance of buildings to moisture penetration vertical loads • Storage, preparation and use of materials on site • Walls subjected to lateral loads but not subjected to • The execution of masonry vertical loads. • Masonry protection during execution. • A4 Loose-leaf/PDF • 46 pages • Published by BSI • A4 Loose-leaf/PDF • 41 pages • Published by BSI • ISBN 0 580 47821 1 • BSI order ref BS EN 1996-3:2006 • ISBN 0 580 47822 X • BSI order ref BS EN 1996-2:2006 Price £162*, Member Price £81 Price £142*, Member Price £71 UK National Annex to BS EN 1996-3:2006 UK National Annex to BS EN 1996-2:2006 • A4 Loose-leaf/PDF • 14 pages • Published by BSI • A4 Loose-leaf/PDF • 6 pages • Published by BSI • ISBN 978 0 580 59810 4 • BSI order ref NA to BS EN 1996-3:2006 • ISBN 0 580 59818 0 • BSI order ref NA to BS EN 1996-2:2006 Price £70*, Member Price £35 Price £40*, Member Price £20 Eurocode 7 Series Geotechnical design Eurocode 7 Geotechnical design is applicable to the geotechnical aspects of the design of buildings and civil engineering works. It is concerned with the requirements for strength, stability, serviceability and durability of structures. BS EN 1997-1:2004 Geotechnical design. General rules BS EN 1997-2:2007 Eurocode 7. Geotechnical design. BS EN 1997 applies to the geotechnical aspects of the design Ground investigation and testing of buildings and civil engineering works. It is concerned with BS EN 1997-2 gives guidance for the planning and interpretation the requirements for strength, stability, serviceability and of geotechnical laboratory and field tests that are used for the durability of structures. support of geotechnical design of buildings and civil engineering It covers the following topics: works. • Basis of geotechnical design BS EN 1997-2 covers the following topics: • Geotechnical data • Planning of ground investigations • Supervision of construction, monitoring and maintenance • Soil and rock sampling and groundwater measurements • Fill, dewatering, ground improvement and reinforcement • Field tests in soil and rock • Spread foundations • Laboratory tests on soil and rock. • Pile foundations • Anchorages • Retaining structures. • A4 Loose-leaf/PDF • 202 pages • Published by BSI • ISBN 0 580 50569 0 • BSI order ref BS EN 1997-2:2007 • A4 Loose-leaf/PDF • 172 pages • Published by BSI Price £234*, Member Price £117 • ISBN 0 580 45212 3 • BSI order ref BS EN 1997-1:2004 Price £234*, Member Price £117 UK National Annex to BS EN 1997-1:2004 • A4 Loose-leaf/PDF • 20 pages • Published by BSI UK National Annex to BS EN 1997-1:2004 • ISBN 978 0 580 60946 6 • BSI order ref NA to BS EN 1997-1:2004 • A4 Loose-leaf/PDF • 20 pages • Published by BSI Price £84*, Member Price £42 • ISBN 0 580 60946 6 • BSI order ref NA to BS EN 1997-1:2004 Price £86*, Member Price £43 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 14 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 8 Series Design of structures for earthquake resistance Eurocode 8 Design of structures applies to the design and construction of buildings and civil engineering works in seismic regions. Its purpose is to ensure that in the event of earthquakes: • Human lives are protected • Damage is limited • Structures important to civil protection remain operational. It is unlikely that BS EN 1998 needs to be used in the UK, except for special structures – e.g. nuclear structures, long span bridges and tall buildings. BS EN 1998-1:2004 Eurocode 8. Design of structures for BS EN 1998-3:2005 Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions earthquake resistance. Assessment and retrofitting of and rules for buildings buildings BS EN 1998-1 applies to the design of buildings and civil Although assessment and retrofitting of existing structures for engineering works in seismic regions. non-seismic actions is not yet covered by the relevant material- BS EN 1998-1 deals with: dependent Eurocodes, BS EN 1998-3 was specifically developed • Basic performance requirements and compliance criteria because: applicable to buildings and civil engineering works in • For many older structures, seismic resistance was not seismic regions considered during the original construction, whereas • Rules for the representation of seismic actions and for their non-seismic actions were catered for, at least by means combination with other actions of traditional construction rules • Fundamental requirements and other relevant aspects of design and safety related • Seismic hazard evaluations in accordance with present to base isolation of structures and specifically to base isolation of buildings knowledge may indicate the need for retrofitting campaigns • General design rules relevant specifically to buildings. Contain specific rules • Damage caused by earthquakes may create the need for for various structural materials and elements, relevant specifically to buildings. major repairs. • A4 Loose-leaf/PDF • 94 pages • Published by BSI • A4 Loose-leaf/PDF • 232 pages • Published by BSI • ISBN 0 580 46615 9 • BSI order ref BS EN 1998-3:2005 • ISBN 0 580 45872 5 • BSI order ref BS EN 1998-1:2004 Price £186*, Member Price £93 Price £256*, Member Price £128 No National Annex planned. UK National Annex to BS EN 1998-1:2004 • A4 Loose-leaf/PDF • 18 pages • Published by BSI BS EN 1998-4:2006 Eurocode 8. Design of structures for • ISBN 0 580 55090 4 • BSI order ref NA to BS EN 1998-1:2004 earthquake resistance. Silos, tanks and pipelines Price £86*, Member Price £43 BS EN 1998-4 specifies principles and application rules for the seismic design of the structural aspects of facilities composed of above-ground and buried pipeline systems and of storage tanks of different types and uses, as well as for independent items, BS EN 1998-2:2005+Amendment1:2009 Eurocode 8. such as single water towers serving a specific purpose, or groups Design of structures for earthquake resistance. Bridges of silos enclosing granular materials, etc. BS EN 1998-2 primarily covers the seismic design of bridges in BS EN 1998-4 includes the additional criteria and rules required which the horizontal seismic actions are mainly resisted through for the seismic design of these structures without restrictions on bending of the piers or at the abutments; i.e. of bridges their size, structural types and other functional characteristics. For composed of vertical or nearly vertical pier systems supporting some types of tanks and silos, it also provides detailed methods the traffic deck superstructure. It is also applicable to the seismic of assessment and verification rules. design of cable-stayed and arched bridges, although its provisions should not be considered as fully covering these cases. • A4 Loose-leaf/PDF • 84 pages • Published by BSI • ISBN 0 580 49272 9 • BSI order ref BS EN 1998-4:2006 • A4 Loose-leaf/PDF • 152 pages • Published by BSI Price £186*, Member Price £93 • ISBN 0 580 46967 0 • BSI order ref BS EN 1998-2:2005 Price £234*, Member Price £117 UK National Annex to BS EN 1998-4:2006 • A4 Loose-leaf/PDF • 10 pages • Published by BSI UK National Annex to BS EN 1998-2:2005 • ISBN 978 0 580 55092 8 • BSI order ref NA to BS EN 1998-4:2006 • A4 Loose-leaf/PDF • 14 pages • Published by BSI Price £40*, Member Price £20 • ISBN 0 580 55091 1 • BSI order ref NA to BS EN 1998-2:2005 Price £84*, Member Price £42 *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/Eurocodes 15 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 8 Series Design of structures for earthquake resistance BS EN 1998-5:2004 Eurocode 8. Design of structures for BS EN 1998-6:2005 Eurocode 8. Design of structures for earthquake resistance. Foundations, retaining structures earthquake resistance. Towers, masts and chimneys and geotechnical aspects BS EN 1998-6 establishes requirements, criteria and rules for the BS EN 1998-5 establishes the requirements, criteria, and rules design of tall slender structures such as towers; including bell- for the siting and foundation soil of structures for earthquake towers, intake towers, radio and TV-towers; masts; industrial resistance. It covers the design of different foundation systems, chimneys and lighthouses. the design of earth retaining structures and soil-structure Requirements are also given for non-structural elements, such interaction under seismic actions. As such it complements as the lining material of industrial chimneys, antennae and other Eurocode 7 which does not cover the special requirements equipment. of seismic design. The provisions of Part 5 apply to buildings (BS EN 1998-1), bridges (BS EN 1998-2), • A4 Loose-leaf/PDF • 52 pages • Published by BSI towers, masts and chimneys (BS EN 1998-6), silos, tanks and pipelines (BS EN 1998-4). • ISBN 0 580 46614 0 • BSI order ref BS EN 1998-6:2005 BS EN 1998-5 also contains empirical charts for simplified evaluation of Price £172*, Member Price £86 liquefaction potential and gives a simplified procedure for seismic analysis of retaining structures. UK National Annex to BS EN 1998-6:2005 • A4 Loose-leaf/PDF • 10 pages • Published by BSI • A4 Loose-leaf/PDF • 48 pages • Published by BSI • ISBN 978 0 580 55094 2 • BSI order ref NA to BS EN 1998-6:2005 • ISBN 0 580 45873 3 • BSI order ref BS EN 1998-5:2004 Price £40*, Member Price £20 Price £162*, Member Price £81 UK National Annex to BS EN 1998-5:2004 PD 6698:2009 Recommendations for the design of • A4 Loose-leaf/PDF • 8 pages • Published by BSI structures for earthquake resistance to BS EN 1998 • ISBN 0 580 55093 5 • BSI order ref NA to BS EN 1998-5:2004 • A4 Loose-leaf/PDF • 30 pages • Published by BSI Price £40*, Member Price £20 • ISBN 0 580 61346 3 • BSI order ref PD 6698:2009 Price £120*, Member Price £60 Eurocode 9 Series Design of aluminium structures Eurocode 9 Design of aluminium structures applies to the design of buildings and civil engineering and structural works in aluminium. The series is concerned with requirements for resistance, serviceability, durability and fire resistance of aluminium structures. Other requirements, such as thermal or sound insulation, are not concerned. BS EN 1999-1-1:2007 Eurocode 9. Design of aluminium BS EN 1999-1-2:2007 Eurocode 9. Design of aluminium structures. General structural rules structures. Structural fire design BS EN 1999-1-1 gives the basic design rules for structures made BS EN 1999-1-2 describes the principles, requirements of wrought aluminium alloys and limited guidance for cast alloys. and rules for the structural design of buildings exposed to fire, including safety requirements. This standard applies to aluminium structures required to fulfil load bearing functions and only deals with passive methods of fire protection. • A4 Loose-leaf/PDF • 210 pages • Published by BSI • A4 Loose-leaf/PDF • 64 pages • Published by BSI • ISBN 0 580 50415 0 • BSI order ref BS EN 1999-1-1:2007 • ISBN 0 580 50415 0 • BSI order ref BS EN 1999-1-2:2007 Price £234*, Member Price £117 Price £168*, Member Price £84 UK National Annex to BS EN 1999-1-1:2007 UK National Annex to BS EN 1999-1-2:2007 • A4 Loose-leaf/PDF • 12 pages • Published by BSI • A4 Loose-leaf/PDF • 8 pages • Published by BSI • ISBN 0 580 55095 9 • BSI order ref NA to BS EN 1999-1-1:2007 • ISBN 0 580 57346 0 • BSI order ref NA to BS EN 1999-1-2:2007 Price £70*, Member Price £35 Price £40*, Member Price £20 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 16 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • Eurocode 9 Series Design of aluminium structures BS EN 1999-1-3:2007 Eurocode 9. Design of aluminium BS EN 1999-1-5:2007 Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue structures. Shell structures BS EN 1999-1-3 describes the principles, requirements and BS EN 1999-1-5 applies to the structural design of aluminium rules for the structural design of aluminium components and structures, stiffened and unstiffened, that have the form of a structures subjected to fatigue actions and gives rules for: shell of revolution or of a round panel in monocoque structures. • Same life design The provisions in the standard apply to axisymmetric shells • Damage tolerant design (cylinders, cones, spheres) and associated circular or annual • Design assisted by testing. plates and beam section rings and stringer stiffeners where they form part of the complete structure. • A4 Loose-leaf/PDF • 100 pages • Published by BSI • A4 Loose-leaf/PDF • 70 pages • Published by BSI • ISBN 0 580 50929 2 • BSI order ref BS EN 1999-1-3:2007 • ISBN 0 580 50414 3 • BSI order ref BS EN 1999-1-5:2007 Price £186*, Member Price £93 Price £172*, Member Price £86 UK National Annex to BS EN 1999-1-3:2007 UK National Annex to BS EN 1999-1-5:2007 • A4 Loose-leaf/PDF • 10 pages • Published by BSI • A4 Loose-leaf/PDF • 6 pages • Published by BSI • ISBN 0 580 55096 6 • BSI order ref NA to BS EN 1999-1-3:2007 • ISBN 978 0 580 57352 1 • BSI order ref NA to BS EN 1999-1-5:2007 Price £40*, Member Price £20 Price £40*, Member Price £20 PD 6702-1:2009 Structural use of aluminium. Recommendations for the design of aluminium BS EN 1090-3:2008 Execution of steel structures and structures to BS EN 1999 aluminium structures. Technical requirements for • A4 Loose-leaf/PDF • 44 pages • Published by BSI aluminium structures • ISBN 0 580 63065 1 • BSI order ref PD 6702-1:2009 BS EN 1090-3 is the third part of the BS EN 1090 series of Price £138*, Member Price £69 standards. It specifies requirements for the execution of aluminium structures, to ensure adequate levels of mechanical resistance and stability, serviceability and durability. It also specifies requirements for the execution of aluminium BS EN 1999-1-4:2007 Eurocode 9. Design of aluminium structures in particular those that are designed according to structures. Cold-formed structural sheeting BS EN 1999-1-1, BS EN 1999-1-2, BS EN 1999-1-3, BS EN 1999-1-4 and BS EN 1999-1-5. BS EN 1999-1-4 gives design requirements for cold-formed trapezoidal aluminium sheeting. It applies to cold-formed • A4 Loose-leaf/PDF • 116 pages • Published by BSI aluminium products made from hot-rolled or cold-rolled sheet or strip that have been cold-formed by such processes as cold- • ISBN 0 580 55320 2 rolled forming or press-breaking. Methods are also included Price £196*, Member Price £98 for stressed-skin design using aluminium sheeting as a structural diaphragm. • A4 Loose-leaf/PDF • 68 pages • Published by BSI BSI STANDARDS DEVELOPMENT WEBSITE • ISBN 0 580 50416 7 • BSI order ref BS EN 1999-1-4:2007 Price £172*, Member Price £86 See what’s happening at BSI: • Search through standards currently in UK National Annex to BS EN 1999-1-4:2007 development and monitor their progress • A4 Loose-leaf/PDF • 8 pages • Published by BSI • Discover and comment on proposals for • ISBN 978 0 580 57350 7 • BSI order ref NA to BS EN 1999-1-4:2007 new standards and draft standards Price £40*, Member Price £20 • Find out which trade associations and professional bodies are represented on BSI committees and discover which standards they are working on • Suggest a new standard and put forward your ideas Visit http://standardsdevelopment.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/Eurocodes 17 DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • British Standards replaced by Eurocodes Loading for buildings BS 5268-7.2:1989 Structural use of timber. Recommendations for the calculation basis for BS 6399-1:1996 Loading for buildings. Code of practice for dead and imposed loads span tables. Joists for flat roofs Superseded by BS EN 1991 Superseded by BS EN 1995 BS 6399-2:1997 Loading for buildings. Code of practice for wind loads BS 5268-7.3:1989 Structural use of timber. Recommendations for the calculation basis for Superseded by BS EN 1991 span tables. Ceiling joists Superseded by BS EN 1995 BS 6399-3:1988 Loading for buildings. Code of practice for imposed roof loads Superseded by BS EN 1991 BS 5268-7.4:1989 Structural use of timber. Ceiling binders Superseded by BS EN 1995 Structural use of concrete BS 5268-7.5:1990 Structural use of timber. Recommendations for the calculation basis for BS 8110-1:1997 Structural use of concrete. Code of practice for design and span tables. Domestic rafters construction Superseded by BS EN 1995 Superseded by BS EN 1992 BS 5268-7.6:1990 Structural use of timber. Recommendations for the calculation basis for BS 8110-2:1985 Structural use of concrete. Code of practice for special circumstances span tables. Purlins supporting rafters Superseded by BS EN 1992 Superseded by BS EN 1995 BS 8110-3:1985 Structural use of concrete. Design charts for singly reinforced beams, doubly BS 5268-7.7:1990 Structural use of timber. Recommendations for the calculation basis for reinforced beams and rectangular columns span tables. Purlins supporting sheeting or decking Superseded by BS EN 1992 Superseded by BS EN 1995 BS 8007: 1987 Code of practice for design of concrete structures for retaining aqueous liquids Structural use of masonry Superseded by BS EN 1992 BS 5628-1:2005 Code of practice for the use of masonry. Structural use of unreinforced masonry Structural use of steel Superseded by BS EN 1996 BS 5950-1:2000 Structural use of steelwork in building. Code of practice for design. Rolled BS 5628-2:2005 Code of practice for use of masonry. Structural use of reinforced and and welded sections prestressed masonry Superseded by BS EN 1993 Superseded by BS EN 1996 BS 5950-2:2001 Structural use of steelwork in building. Specification for materials, BS 5628-3:2005 Code of practice for use of masonry. Materials and components, design and fabrication and erection. Rolled and welded sections workmanship Superseded by BS EN 1994 Superseded by BS EN 1996 BS 5950-3.1:1990 Structural use of steelwork in building. Design in composite Geotechnics construction. Code of practice for design of simple and continuous composite beams BS 8002:1994 Code of practice for earth retaining structures Superseded by BS EN 1994 Superseded by BS EN 1997-1 BS 5950-4:1994 Structural use of steelwork in building. Code of practice for design of BS 8004: 1986 Code of practice for foundations composite slabs with profiled steel sheeting Superseded by BS EN 1997-1 Superseded by BS EN 1994 BS 5950-5:1998 Structural use of steelwork in building. Code of practice for design of cold Structural use of Aluminium formed thin gauge sections BS 8118-1:1991 Structural use of aluminium. Code of practice for design Superseded by BS EN 1993 Superseded by BS EN 1999 BS 5950-6:1995 Structural use of steelwork in building. Code of practice for design of light BS 8118-2:1991 Structural use of aluminium. Specification for materials, workmanship and gauge profiled steel sheeting protection Superseded by BS EN 1993 Superseded by BS EN 1999 BS 5950-7: 1992 Structural use of steelwork in building. Specification for materials and workmanship: cold formed sections Bridges Obsolescent BS 5400-1:1988 Steel, concrete and composite bridges. General statement BS 5950-8:2003 Structural use of steelwork in building. Code of practice for fire resistant design Superseded by BS EN 1990, BS EN 1991 Superseded by BS EN 1993 BS 5400-2: 2006 Steel, concrete and composite bridges. Specification for loads BS 5950-9:1994 Structural use of steelwork in building. Code of practice for stressed skin design Superseded by BS EN 1990, BS EN 1991 Superseded by BS EN 1993 BS 5400-3:2000 Steel, concrete and composite bridges. Code of practice for design of steel bridges BS 449-2: 1969 Specification for the use of structural steel in building. Metric units Superseded by BS EN 1993 Superseded by BS EN 1993 BS 5400-4: 1990 Steel, concrete and composite bridges. Code of practice for design of BS 4604-1: 1970 Specification for the use of high strength grip bolts in structural steelwork. concrete bridges Metric series. General grade Superseded by BS EN 1992 Superseded by BS EN 1993 BS 5400-5:2005 Steel, concrete and composite bridges. Code of practice for design of BS 4604-2: 1970 Specification for the use of high strength grip bolts in structural steelwork. composite bridges Metric series. Higher grade (parallel shank) Superseded by BS EN 1994 Superseded by BS EN 1993 BS 5400-6: 1999 Steel, concrete and composite bridges. Specification for materials and workmanship, steel Structural use of timber Superseded by BS EN 1090-2 BS 5268-2:2002 Structural use of timber. Code of practice for permissible stress design, BS 5400-7:1978 Steel, concrete and composite bridges. Specification for materials and materials and workmanship workmanship, concrete, reinforcement and prestressing tendons Superseded by BS EN 1995 Superseded by BS EN 1992 BS 5268-3:2006 Structural use of timber. Code of practice for trussed rafter roofs BS 5400-8: 1978 Steel, concrete and composite bridges. Recommendations for materials Superseded by BS EN 1995 and workmanship, concrete, reinforcement and prestressing tendons BS 5268-4.1:1978 Structural use of timber. Fire resistance of timber structures. Superseded by BS EN 1992 Recommendations for calculating fire resistance of timber members BS 5400-9.1 and 9.2 bearings - not affected Superseded by BS EN 1995 BS 5400-10C: 1999 Steel, concrete and composite bridges. Charts for classification of details BS 5268-4.2:1990 Structural use of timber. Fire resistance of timber structures. Recommendations for fatigue for calculating fire resistance of timber stud walls and joisted floor constructions Superseded by BS EN 1995 Towers, Masts and Chimneys BS 5268-5:1989 Structural use of timber. Code of practice for the preservative treatment of BS 8100-1:1986 Lattice towers and masts. Code of practice for loading structural timber Superseded by BS EN 1993 Obsolescent BS 8100-2:1986 Lattice towers and masts. Guide to the background and use of Part 1 BS 5268-6.1:1996 Structural use of timber. Code of practice for timber frame walls. 'Code of practice for loading' Dwellings not exceeding seven storeys Superseded by BS EN 1993 Superseded by BS EN 1995 BS 8100-3:1999 Lattice towers and masts. Code of practice for strength assessment of BS 5268-6.2:2001 Structural use of timber. Code of practice for timber frame walls. members of lattice towers and masts Buildings other than dwellings not exceeding seven storeys Superseded by BS EN 1993 Superseded by BS EN 1995 BS 8100-4:1995 Lattice towers and masts. Code of practice for loading of guyed masts BS 5268-7.1:1989 Structural use of timber. Recommendations for the calculation basis for Superseded by BS EN 1993 span tables. Domestic floor joists BS 4076:1989 Specification for steel chimneys Superseded by BS EN 1995 Superseded by BS EN 1993 Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of 18 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and +44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
    • British Standards Online (BSOL) Conferences Our conferences bring together key players to debate latest trends, regulations and issues, with opportunities for delegates to take part in open discussions and British Standards Online (BSOL) is BSI’s flagship database of debates led by panels of expert speakers. These standards. Used by professionals around the world, it is the conferences are often accompanied by relevant most comprehensive and authoritative source of British, workshops which go into detail on particular topics and adopted European and international, standards. in a practical learning environment. BSOL is the authoritative collection of standards, and using See the latest conferences we offer at standards can help you and your organization to: http://shop.bsigroup.com/conferences • Improve your products or services • Reduce costs • Attract new customers • Increase your competitive edge • Inspire trust and confidence Sign up to free e-Newsletters • Improve quality and performance lessening the likelihood of mistakes • Make products compatible • Encourage international trade. http://shop.bsigroup.com/bsol BSI Standards Development To keep up-to-date with the latest developments in website construction and Eurocodes, sign up to receive our sector-specific newsletters at See what’s happening at BSI: http://shop.bsigroup.com/newsletters • Search through standards currently in development and monitor their progress • Discover and comment on proposals for new standards and draft standards BSI Membership • Find out which trade associations and professional bodies are represented on BSI committees and discover which standards they are working on • Suggest a new standard and put forward your ideas http://standardsdevelopment.bsigroup.com BSI Membership gives you access to an exclusive range of services aimed at helping your business to prosper in an increasingly competitive marketplace. www.bsimembers.com Construction brochure Download the latest Construction and built environment brochure at http://shop.bsigroup.com/constructionstandards
    • How to buy online… 1 Visit our online shop at www.bsigroup.com/shop and 5 Log in or register to buy online type in a keyword or a standard number/title into the search box. 6 Follow the payment instructions 2 Click on the publication you require in the search results 7 Download your standard or wait for the hard copy to deliver 3 Add the publication to your basket …it’s that easy! 4 Continue shopping or if you are ready to finish shopping, click on ‘checkout’ BSI Membership Standards are recognized as a powerful business tool and BSI Membership gives you access to an exclusive range of can define crucial aspects of a company's safety, quality services aimed at helping your business to prosper in an and reliability. They also enable businesses to operate in increasingly competitive marketplace. a global market. Services and benefits include: • 50% off British standards • Free subscription to Update Standards and access to • 50% off the subscription of our flagship database product, Business Standards Online British Standards Online (BSOL) • Free entry in BSI's searchable online Member Directory • Free P&P and credit facilities • Access to PLUS (Private List Updating Service) • And much more To find out more call +44 (0)20 8996 7002 or visit www.bsimembers.com Please quote marketing reference BR-EURO-10 when placing your order. BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK FSC Logo Tel +44 (0)20 8996 9000 Printed responsibly using vegetable-oil based inks Fax +44 (0)20 8996 7400 on 100% recycled paper. Printed on FSC material www.bsigroup.com under chain of custody conditions by an FSC certified printer. Please recycle after use. © BSI copyright 02/10