3D Printing Market - MATERIAL (ABS, PLA, Photopolymer, Ceramics etc.), TECHNOLOGY, APPLICATION (Medical, Aerospace & Defense, Automotive & Others) : A Global Study (2014-2024)
Upcoming SlideShare
Loading in...5
×
 

Like this? Share it with your network

Share

3D Printing Market - MATERIAL (ABS, PLA, Photopolymer, Ceramics etc.), TECHNOLOGY, APPLICATION (Medical, Aerospace & Defense, Automotive & Others) : A Global Study (2014-2024)

on

  • 462 views

Market growth and trends across different application verticals such as aerospace & defense, architecture & construction, automotive, consumer lifestyle products and electronics, education & research, ...

Market growth and trends across different application verticals such as aerospace & defense, architecture & construction, automotive, consumer lifestyle products and electronics, education & research, healthcare, and industrial and other application market have been covered. Consumer lifestyle products and electronics held highest market revenue generated over $384.80 million in 2013. This sector is further expected to grow at a CAGR of 21.60% (2014-2022) to a market value of over $2.9 billion. Healthcare sector accounted for the third largest revenue ($319.04 million) which was followed by aerospace & defense ($300.57 million).

Statistics

Views

Total Views
462
Views on SlideShare
447
Embed Views
15

Actions

Likes
1
Downloads
8
Comments
0

2 Embeds 15

https://twitter.com 13
http://www.slideee.com 2

Accessibility

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

3D Printing Market - MATERIAL (ABS, PLA, Photopolymer, Ceramics etc.), TECHNOLOGY, APPLICATION (Medical, Aerospace & Defense, Automotive & Others) : A Global Study (2014-2024) Document Transcript

  • 1. Email: sales@bisresearch.com Tel: +1 650 228 0182
  • 2. BIS Research Sample Page 2 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) BIS Research is a leading market intelligence and technology research company. BIS Research publishes in-depth market intelligence reports focusing on the market estimations, technology analysis, emerging high-growth applications, deeply segmented granular country-level market data and other important market parameters useful in the strategic decision making for senior management. BIS Research provides multi-client reports, company profiles, databases, and custom research services. Copyright © 2014 BIS Research All Rights Reserved. This document contains highly confidential information and is the sole property of BIS Research. Disclosing, copying, circulating, quoting or otherwise reproducing any or all contents of this document is strictly prohibited. Access to this information is provided exclusively for the benefit of the people or organization concerned. It may not be accessed by, or offered whether for sale or otherwise to any third party.
  • 3. BIS Research Sample Page 3 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 1 EXECUTIVE SUMMARY The study includes segmentation of 3D printing industry based upon technology, application verticals, materials, and geography. The market potential of 3D printing industry based on these segments, excluding technology, has been analyzed. Based on deposition techniques, 3D printing technology has been divided into FDM, EBM, SHS, SLM, SLS, LOM, SLA, DLP, 3DP, and EBF3. The key patents for SLS, among these technologies expired recently which according to some experts would be a landmark in the acceleration of 3D printing market growth. Though, these technologies have proved to be fast and cost effective when it comes to building prototypes but further research and technology up gradation is required to venture into large volume production. Depending on the applicability of these 3D printing technologies the study exhaustively covers materials such as metals and metal alloys, plastics, photopolymers, ceramic, nylon, paper, and wax. 3D PRINTING MARKET VALUE FOR MATERIALS (2013-2022) Sample Figure
  • 4. BIS Research Sample Page 4 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) Source: Expert Input, BIS Research Analysis Photopolymers accounted for the highest market revenue generating over $XXXX which is expected to grow at a CAGR of XXXX% to reach the market revenue of $XXXX million by 2022. Metal on the other hand held lowest share ($XXXX million) in 2013 but is likely to witness highest CAGR of XXXX % (2014-2022) to reach the value of $XXXX million by 2022. Market growth and trends across different application verticals such as aerospace & defense, architecture & construction, automotive, consumer lifestyle products and electronics, education & research, healthcare, and industrial and other application market have been covered. 3D PRINTING MARKET VALUE FOR APPLICATION VERTICALS (2013-2022) ($Million) 2013 2014 2015 2018 2019 2020 2021 2022 CAGR% Aerospace & Defense XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Architecture and Construction XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Automotive XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Consumer Lifestyle Products & Electronics XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Education & Research XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Healthcare XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Industrial XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Others XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Total XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Source: Expert Input, BIS Research Analysis
  • 5. BIS Research Sample Page 5 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) Consumer lifestyle products and electronics held highest market revenue generating over $XXXX million in 2013. This sector is further expected to grow at CAGR of XXXX% (2014- 2022) to a market value of over $XXXXX billion. Automotive sector accounted for second largest share ($XXXX million) in 2013. Healthcare sector accounted for the third largest revenue ($XXXX million) which was followed by aerospace & defense ($XXXX million). The growth trend in these application verticals have been studied across different geographical regions segmented into North America, Europe, APAC, and others. 3D PRINTING/ ADDITIVE MANUFACTURING MARKET VALUE, BY GEOGRAPHY Country 2013 2014 2015 2018 2020 2021 2022 CAGR% (2014- 2022) North America XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Europe XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX APAC XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Others XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Source: Expert Input, BIS Research Analysis North America accounted for the highest market share ($ XXXX million) in 2013. It is expected to grow at a CAGR of XXXX% (2014-2022) to reach market revenue of $XXXX billion by 2022. It is expected that APAC region will show highest CAGR of XXXX% (2014-2022). This growth can be attributed mainly to China and Japan with Chinese market likely to grow at at a CAGR of XXXX% from 2014 to 2022.
  • 6. BIS Research Sample Page 6 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) The report presents a detailed market analysis of 3D printing and Additive Manufacturing by incorporating complete pricing and cost analysis of 3D printers and materials. Besides porter’s and PESTLE analysis of the market have also been done. The report deals with all the driving factors, restraints, and opportunities with respect to the 3D printing and Additive Manufacturing market, which are helpful in identifying trends and key success factors for the industry. Lastly, the current market landscape is covered with detailed competitive landscape and company profiles of all key players across the ecosystem. The report also formulates the entire value chain of the market, along with industry trends of 3D printing application industries and materials used with emphasis on market timelines & technology roadmaps.
  • 7. BIS Research Sample Page 7 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 2 MARKET OVERVIEW 2.1 MARKET DRIVERS 3D PRINTING INDUSTRY MARKET DRIVERS AND ITS IMPACT Drivers 1-2 Years 2-5 Years 5-10 Years Reduction in turnaround time and accelerated product-development cycles Decreasing price of consumer / personal printers Improving quality of professional and industrial printers (both in process and material) Mass customization and personalization Country specific push factors (government support and funding, localization and environmental impact) Industry specific adoption and more acceptable use cases New emerging business models and competitive disruptions Environmental and economical dynamics
  • 8. BIS Research Sample Page 8 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) Source: Expert Interview, BIS Research Analysis 2.1.1.1 Reduction in Turnaround Time & Accelerated Product Development Cycles 3D printing is on its way to becoming the ubiquitous solution for prototyping. 3D printing enables companies to make prototypes without tooling, thereby helping companies to get customer feedback faster and better. This has not only cut short the time to develop prototypes in a cost effective way but has also allowed companies to test different configurations in order to determine customers preference, thus reducing product-launch risk and time to market. 3D printers are increasingly being deployed to speed up the creation of product prototypes. As compared to high-end rapid prototyping (RP) machines, 3D printers offer a better price to performance ratio. While a high- end RP machine may cost somewhere around $XXXX to $XXXX, a 3D printer capable of delivering the same performance can be procured for a lesser amount (SLA for $XXXX to $XXXX; SLS for $XXXX to $XXXX and FDM for $XXXX to $XXXX). Furthermore, companies such as Stratasys and Z Corp are offering printers for prototyping at a price tag as low as $XXXX. Industry experts believe that 3D printing will see widespread adoption in prototyping with decreasing price, increasing throughput, and performance. Currently, being an economical and effective tool for early design and visualization models, 3D printing is making inroads in advanced areas such as functional prototyping. Industry experts opine that the use of 3D printing will contribute to significant reductions in product-development cycle times in the coming years, and will probably disrupt the approach of the companies towards R&D. As such it is expected to emerge as a key growth enabler for 3D industry.
  • 9. BIS Research Sample Page 9 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 2.1.1.2 Decreasing Price of Consumer /Personal Printers For quite a long time price has been a restraining factor for printers, especially in the consumer segment. With the falling price of consumer printers, there is a renewed interest from the developers, hobbyists and other enthusiasts. A consumer grade printer is being sold at as low as $XXXX. This is expected to decrease further in the next few years, with expiring patent and increasing competition. Moreover companies are increasingly exploring options to generate revenue from aftermarket services and products, such as material and system upgrade. Successful implementation of such revenue model would make the personal printer more affordable. 2.2 MARKET STATISTICS FIGURE 1 OVERALL MARKET Sample Figure Source: Expert Interview, BIS Research Analysis For the market studied, 3D printing system sales generated revenue of $XXXX million and it is expected to reach to $XXXX billion by 2022, growing at an estimated CAGR of XXXX% from
  • 10. BIS Research Sample Page 10 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 2014 to 2022. A sizeable chunk of the revenue will be generated from industrial sales while consumer printers would account for maximum shipment. The price for industrial system will not drop significantly in the coming years. However, the consumer printers are expected to witness drastic drop in the price resulting in higher shipments of such printers. The market for direct parts produced from 3D printing was $XXXX million in 2013 and is expected to account for over $XXXX billion in 2022, growing at an estimated CAGR of XXXX% from 2014 to 2022. The healthcare segment is expected to account for the lion’s share towards the total revenue by direct parts.
  • 11. BIS Research Sample Page 11 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 3 TECHNOLOGY MARKET TABLE 1 COST AND TIME ANALYSIS OF FDM TECHNOLOGY & CNC MACHINING Method Cost Lead Time CNC machining $XXXX XX days FDM Technology $XXXX XX days Savings $XXXX (XX%) XX days (XX%) Source: Stratasys website The above figure shows that using FDM technology, the cost was reduced by almost XX% while the lead time was reduced by over XX%. This shows the cost effectiveness and drastic reduction in lead time that can be achieved using 3D printing in the repair and maintenance of costly aerospace parts. TABLE 2 ADVANTAGES & DISADVANTAGES OF FDM Advantages Disadvantages Parts produced are mechanically stable due to durability of materials used An extra step of polishing is required to give fine touch Inexpensive printers due to expiry of patents Profit margin is less and barrier to entry is more because of its wide usage Source: Expert Input, BIS Research Analysis
  • 12. BIS Research Sample Page 12 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 4 MATERIALS MARKET 4.1 PLASTIC Right from the outset of 3D printing technology, plastic holds a major share of the material market. Different varieties of plastics have been developed that employ technologies such as Fused Deposition Modeling (FDM), Selective Laser Sintering (SLS), and Selective Heat Sintering (SHS), among others. The two types of plastic that are in major use in the 3D printing industry include Acrylonitrile butadiene styrene (ABS), and Polylactic acid (PLA). Both are thermoplastics, which become soft post heating and can be molded. Further on cooling they return back to their initial solid form. A plastic material before its usage as a 3D printing material needs to satisfy three stage test as enumerated below: FIGURE 2 THREE STAGES OF TEST FOR THE USABILITY OF A PLASTIC MATERIAL Source: Expert Input, BIS Research Analysis
  • 13. BIS Research Sample Page 13 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) The first stage includes its formation of plastic filament which is a raw 3D printer feedstock. Secondly, during 3D printing process it should form accurate physical parts. Thirdly, the properties of final product should match the standards compared to conventional methods of manufacturing in terms of properties such as strength, durability, etc. Most of the thermoplastics like ABS, and PLA are capable of forming plastic filaments to be used in the next two stages. However, the range of plastic material would increase only after further research which would make the use of other plastics economical. 4.2 OTHERS 4.2.1 WAX 3D printing technology is using wax for production of casting patterns to be used in investment casting process. 3D Systems uses thermojet wax modeling system. This method is similar to Stereo lithography (SLA) and material being employed is wax like resin. While using wax a support structure is required for any overhanging geometry which is later removed during post finishing process. Since, support structure can be removed easily; option of building complex geometry is possible. The casting pattern is used in the jewelry sector. These patterns can also be used to build complex hollow components. The wax pattern is electroplated using metals followed by melting of wax to produce thin walled hollow metal component. The application can be used to build medium to large parts for aerospace, engine, energy, and others. The casting pattern is generally made using injection molding system that costs around $XXXX to $XXXX with a lead time of around XX months. However, Stratasys has employed its patented FDM technology, thereby reducing the cost by more than XX percent and reducing time by more than XX percent.
  • 14. BIS Research Sample Page 14 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) TABLE 3 COST & TIME ANALYSIS OF FDM AND INJECTION MOLDING TECHNIQUE Method Cost Time Injection Molds $XX to $XX XX months FDM Patterns $XXXX XX week Savings $XX to $XX (XX% to XX%) XX weeks (XX%) Source: Stratasys website
  • 15. BIS Research Sample Page 15 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 5 APPLICATIONS MARKET 5.1 INTRODUCTION This chapter describes the several 3D printing application areas, its use cases, and market opportunities across each application vertical. 3D PRINTING APPLICATION MARKET SEGMENT Source: Expert Input, BIS Research Analysis The application market is segmented across different industry verticals as shown in the above figure.
  • 16. BIS Research Sample Page 16 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 5.2 AEROSPACE & DEFENSE MARKET 5.2.1 MARKET STATISTICS Industry experts suggest that the use of 3D printing in aerospace and defense will find wider acceptability across these three key areas- prototypes, demonstration units, and small volume production. It is expected that the production and repairing of parts will also move towards maturity in next few years 3D PRINTING MARKET VALUE FOR AEROSPACE AND DEFENSE APPLICATION VERTICALS (2013-2022) End Use Application 2013 2014 2015 2018 2019 2020 2021 2022 CAGR (2014- 2022) Prototype XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Demonstration Units XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Small-Volume Production XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Others XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Total XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Source: Expert Input, BIS Research Analysis 5.2.1.1 Prototype Market As of 2013, the market for prototyping in aerospace and defense accounted for the biggest pie. It is expected that prototype application will generate revenue of $XXXX million by 2022, growing at a CAGR of XXXX% from 2014 to 2022. 3D printing has matured into a mainstream technology, thanks to its ability to quickly fabricate prototypes which enables designers and engineers to validate design concepts in a shorter time and thereby speeding up the overall development process.
  • 17. BIS Research Sample Page 17 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 5.3 AUTOMOTIVE MARKET 5.4 CONSUMER LIFESTYLE PRODUCTS & ELECTRONICS MARKET Consumer lifestyle products and Electronics component manufacturing through 3D printing is yet another promising area. FIGURE 3 CONSUMER LIFESTYLE PRODUCTS & ELECTRONICS MARKET REVENUE FOR 3D PRINTING INDUSTRY (2013- 2022) Sample Figure Source: Expert Input, BIS Research Analysis
  • 18. BIS Research Sample Page 18 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 6 GEOGRAPHIC ANALYSIS 6.1 INTRODUCTION FIGURE 4 3D PRINTING / ADDITIVE MANUFACTURING MARKET SHARE BY REGION-2013 Sample Figure Source: Expert IInput, BIS Analysis In terms of the numbers of printers being used, the U.S. continues to be the largest market while Germany leads the way in terms of production of 3D printing systems. It is expected that the U.S. will continue to remain the most important 3D printing market accounting for over XX% of the total global sales in 2022. In countries such as the U.S., Germany, the U.K., Japan and other developed countries the growth momentum will be sustained by increasing adoption of metal based 3D printers. These metal based printers are expected to penetrate through the key application verticals, namely aerospace and automotive and impact the production of finished parts in other verticals. However, high cost premium attached with metal 3D printer is seen as a growth dampener.
  • 19. BIS Research Sample Page 19 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 6.1.1 CHINA 3D Printing is expected to witness rapid growth in the country owing to push from the government funding in academic and research institutions and pull from the demand in electronic manufacturing and consumer product s. Most application in these industries is centered on design, sample testing and prototyping and as such the penetration of 3D printers across these verticals is expected to increase significantly. Chinese government has initiated a number of projects such as “National High Technology Research and Development Program” allocating investment of $XX million for 3D printing research. This research project focuses upon the development of laser melting machines for large aerospace parts, and laser sintering equipment for complex parts. FIGURE 5 CHINA Y-O-Y GROWTH IN 3D PRINTING/ ADDITIVE MANUFACTURING Sample Figure Source: Expert Input, BIS Analysis China’s 3D printing industry generated revenue of around $XX million in 2013. Industry experts opine that the country will exhibit an average growth rate of over XX percent year-on- year and the market will reach to around $XX billion by 2022, accounting for around XX% of the global demand.
  • 20. BIS Research Sample Page 20 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 7 INDUSTRIAL ANALYSIS 7.1 PORTER’S FIVE FORCES ANALYSIS 7.1.1 THREAT FROM NEW ENTRANTS TABLE 4 THREAT FROM NEW ENTRANTS S. No. Parameter in Threat from New Entrants Parameter Weight Industrial Weight Weighted Impact 1 Capital needed XXXX XXXX XXXX 2 IP protection XXXX XXXX XXXX 3 R & D expenses XXXX XXXX XXXX 4 Access to distribution channel XXXX XXXX XXXX 5 Economies of scale XXXX XXXX XXXX 6 Govt. regulation XXXX XXXX XXXX 7 Market growth rate XXXX XXXX XXXX Cumulative relative weight XXXX XXXX XXXX Source: Experts Input, BIS Research Analysis As shown in table above the major factor which restricts the entry of new players in the market are stringent IP protection imposed by the existing players, and high R&D expense in the industry. Since its inception, 3D printing industry has been driven by innovation. This entails huge investment in research so that the technology and, consequently, the industry can mature up to a stage where the activities can be commercialized and scaled up. Another factor that makes the entry of new players difficult in market is the inability of 3D printing to attain
  • 21. BIS Research Sample Page 21 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) the economy of scale. Likewise intellectual property (IP) protection which is considered to be the driver for any market has proved to be a growth barrier for this industry. Key players have filed lawsuits against small players preventing them from growing in this market. Nevertheless, high market growth rate backed by government support and the enthusiasm shown by key industrial players are promoting the proliferation of startups in the industry. Also, this industry necessarily does not rely on traditional supply chains and has easy access to the distribution channel. Instead it combines manufacturing with e-commerce which means designing can be done in a central location while products can be sold through online platforms like those of Shapeways. These factors are assisting new players to enter the market and become potential threats to the existing players. As the industry is not highly capital intensive or excessively dependent on labour, it becomes relatively easier for new players to enter the market.
  • 22. BIS Research Sample Page 22 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 7.2 ANALYSIS SUMMARY PORTER’S FIVE FORCES ANALYSIS FOR 3D PRINTING INDUSTRY Supplier 's Power Threat from Substitutes Threat from New Entrants Buyer's Power •m Degree of Competition MediumMedium High Medium Low Source: BIS Research Analysis
  • 23. BIS Research Sample Page 23 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 8 COMPETITIVE LANDSCAPE 8.1 COMPETITIVE BENCHMARKING The percentage share of various development activities undertaken by a company does not give a true picture of the impact of those development activities on the company and the market. For this reason through our analysis and inputs from industry experts we have arrived at a weighted score by attributing specific score to different development activity. The score has been given on a scale of 1 to 5 in ascending order to Event, Business Expansion & Contract, Partnership & Collaboration, Merger & Acquisition, and Product Development. FIGURE 6 BIS RESEARCH ACTIVITY BENCHMARK RELATIVE SCORE (2011-2013) Sample Figure Source: Expert Input, BIS Research Analysis
  • 24. BIS Research Sample Page 24 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 8.1.1 CLUSTER 2 The second cluster includes companies having weighted score between 15 and 40. TABLE 5 CLUSTER 2 COMPANIES ACTIVITY SNAPSHOT Particular Event Business expansion & Contract Merger & Acquisition Product Development Partnership & Collaboration Weighted score Dassault Systemes XX XX XX XX XX XX Arcam AB XX XX XX XX XX XX DSM XX XX XX XX XX XX Luxexcel XX XX XX XX XX XX EOS XX XX XX XX XX XX EnvisionTEC XX XX XX XX XX XX 3T RPD XX XX XX XX XX XX Voxeljet XX XX XX XX XX XX Hoganas AB XX XX XX XX XX XX Organovo XX XX XX XX XX XX Source: Expert Input, BIS Research Analysis Companies such as Dassault Systemes show a balance in their strategy of Merger & Acquisition, and Product Development. Arcam AB on the other hand has resorted to Business Expansion and Contract.
  • 25. BIS Research Sample Page 25 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 9 COMPANY PROFILES 9.1 DASSAULT SYSTÈMES TOTAL REVENUE BY BUSINESS SEGMENT Sample Figure Source: Dassault Systèmes Annual Report & BIS Research TOTAL REVENUE BY GEOGRAPHIC AREA Sample Figure Source: Dassault Systèmes Annual Report & BIS Research
  • 26. BIS Research Sample Page 26 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 9.2 MICROTEC GESELLSCHAFT FÜR MIKROTECHNOLOGIE MBH MICROTEC PRODUCT SNAPSHOT Source: microTEC website and BIS Research In biotechnology application industry, the company integrates fluidic systems for synthesis or analysis; Lab-on-Chip in plastic, dispensers, micro mechanics for cell disruption and other components are integrated to offer a miniaturized end product. Across medical industry the company integrates micro sensors, micro actuators, micro needles and micro filters with ASIC as a System in Package (SiP) In the consumer electronics space microTEC provides high density packaging for memory cards in mobile devices and also offers solutions for high integrated processor modules, along with Giga-Hertz and Tera-Hertz components. The company undertakes miniaturization of camera modules such as lens, LED, Laser and integration of the same across MEMS and NEMS in automotive and telecommunication vertical.
  • 27. BIS Research Sample Page 27 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) 9.3 STRATASYS 9.3.1 ANALYST INSIGHTS Stratasys has been involved in a number of mergers but the benefits derived out of it seems to be limited due to legal restriction which led to limited integration planning prior to merger. Stratasys is facing difficulty in coordinating its organizations which are geographically not contiguous, including its two headquarters in Israel and the U.S. This coordination difficulty encompasses within it sales, distribution and marketing sectors. Managing large number of employees over wide geographical region and inconsistency over different companies standards, controls and policies is also proving to be a bone of contention for them. This is adversely affecting their ability to maintain relationships with suppliers, distributors, customers and employees. 2013 as experts call it as the year of 3D printing has witnessed large number of mergers and acquisitions. If these acquisitions of other companies strategically taken and pursued in the 3D printing industry having greater resources than Stratasys can cause trouble for its demand of products and services. The competitors of Stratasys, like 3D Systems Corporation, is an old player having greater financial, marketing, manufacturing, distribution and other resources. So they can quickly respond to the emerging technologies Stratasys could not diversify its supplier of different components that may result in shortage of some key components, or reduction in quality and other associated factors due to their dependency on limited number of vendors. Uncertainty in global economy, problems faced by financial service sector and credit market and other macroeconomic factors has made end-users to further delay or reduce technology purchases. A huge market base of Stratasys lies in Europe which has been continuously facing the shadow of economic crisis. Tightening monetary measures adopted by countries across the globe and aversion of investors to invest in such a volatile situation has resulted in lower levels of liquidity that makes it difficult for them to expand their business further.
  • 28. BIS Research Sample Page 28 3D Printing Material (ABS, PLA, Photopolymer, Ceramics etc.), Technology, Application Market — A Global Study (2014-2022) DISCLAIMER BIS Research provides valuable market intelligence to an exclusive group of customers in response to orders. The report is licensed for the customer's internal use only and is subject to restrictions set henceforth. This document and its contents are confidential and may not be further distributed, published or reproduced, in whole or in part, by any medium or in any form for any purpose, without the express written consent of BIS Research. Customer will not disclose the contents of the report, whether directly in any media or indirectly through incorporation in a database, marketing list, report or otherwise, or use or permit the use of Information to generate any statistical or other information that is or will be provided to third parties; or voluntarily produce Information in legal proceedings. Market reports are based on expectations, estimates and projections as of the date such information is available. Any recommendation contained in this report may not be suitable for all investors or businesses. The market conclusions drawn are necessarily based upon a number of estimates and assumptions that, while considered reasonable by BIS Research as of the date of such statements, are inherently subject to market fluctuations and business, economic and competitive uncertainties and contingencies For more details regarding permission, please contact us: Email: sales@bisresearch.com Tel: +1 650 228 0182