BESSEY Clamping to equipment and maschine tables

444 views
348 views

Published on

BESSEY products for clamping to equipment and machine tables

Published in: Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
444
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
3
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

BESSEY Clamping to equipment and maschine tables

  1. 1. Simply better.Clamping to NEW pro ducts: sting Self-adjuequipment and toggle cla mpsmachine tables
  2. 2. Self-adjusting toggle clamps Self-adjusting jaw height for rapid clamping The power to be in position fast! while also maintaining constant clamping force. This makes time-consuming manual adjustment of With the new self-adjusting toggle clamps from the pressure screw a thing of the past. BESSEY toggle BESSEY, work pieces of differing heights can be clamps have even more to offer when it comes to clamped both quickly and securely. This makes them their flexibility; the clamping force can be optimized perfectly suited for use in small-scale production to the demands of the particular workpiece, simply situations. However, it wouldn‘t be a BESSEY toggle by turning a set screw on the cantilevered joint. lever clamp if our development team hadn‘t come up Furthermore, the hole pattern on the base plate has with another stand-out feature – true to our company been designed to facilitate fast and secure clamping motto “BESSEY. Simply better.” – which is the ability set-up. All this makes it an extremely – flexible to automatically adjust to different work piece heights clamping tool – give it a try!2
  3. 3. Self-adjusting toggle clamps Simply better. NEW 4 2 4 3 2 1 1 3Your benefits at a glance: 2 Set screw on the cantilevered joint Using the set screw on the canti­1 Automatic adjustment levered joint, the clamping force can of the jaw height be adjusted to your particular require- The BESSEY self adjusting toggle ments, up to 2,500 N (550 lbs). clamp automatically adjusts to the 3 Hole pattern on the base plate height of the particular work piece. The base plate, which is suitable for The infinitely variable jaw height is up both metric and imperial, has been to 40 mm (1 O In.) for the horizontal designed to facilitate fast and secure toggle clamp and up to 16 mm (⅝ In.) clamping set-up. for the push/pull clamp while the 4 Ergonomic handle clamping force remains unchanged. The plastic injection molded and ergo- This renders time-consuming manual nomically designed handle fits well in adjustment of the pressure screw the hand and has a very good grip. unnecessary. 3
  4. 4. Self-adjusting toggle clamps NEW Horizontal toggle clamp with open arm and horizontal base plate STC-HH QQ In the clamped position, the lever is Order-No. Opening Clamping force horizontal mm " N lbs. kg qty. VB0003 QQ Automatic and infinitely variable adjust- STC-HH50 40 1O 2500 550 0.38 6 ment of the clamping height up to 40 mm (1 O In.) while clamping force remains STC-HH70 60 2Z 2500 550 0.42 6 a b c d e unchanged – without having to make manual changes to the position of the pressure screws QQ Clamping force is variable up to 2,500 N (550 lbs) depending on the adjustment of the set screw in the cantilevered joint QQ Sturdy, tempered metal sheets for a long service life QQ Hole pattern on the base plate designed to facilitate fast and secure clamping set-up for metric and imperial QQ High-quality two-component plastic handleTable of dimensions Spindle adjustment range Length of hole spacing 2 Length of hole spacing 3 Length of 2-comp handle Width of 2-comp. handle Length of hole spacing 1 Height of handle (down) Height of handle (open) Length of extension arm Width of extension arm Pressure plate diameter Height of extension arm Width of elongated hole Width of extension arm Length of base plate 1 Length of base plate 2 Height of spindle, cpl. Width of base plate Diameter of hol Length of base Height of base Total length (external) (internal) Order-No. L1 L2 L3 L4 L5 L6 L7 L8 H1 H2 H3 H4 H5 B1 B2 B3 B4 Lo1 Lo2 Lo3 Lo4 Ø STC- mm 210 66 40 23 115 64 50 53 46 155 13 50 20 13 8 26 57 25,4 25,4 38 32-44 6,3 HH50 " 8.27 2.60 1.57 0.91 4.53 2.52 1.97 2.09 1.81 6.10 0.51 1.97 0.79 0.51 0.31 1.02 2.24 1.00 1.00 1.50 1.26-1.73 0.25 STC- mm 210 66 40 23 115 64 50 53 64 175 13 68 38 13 8 26 57 25,4 25,4 38 32-44 6,3 HH70 " 8.27 2.60 1.57 0.91 4.53 2.52 1.97 2.09 2.52 6.89 0.51 2.68 1.50 0.51 0.31 1.02 2.24 1.00 1.00 1.50 1.26-1.73 0.25 H3 H1 H4 H5 L4 L3 L2 L5 H2 L1 Lo 2 Lo 1 Lo 4 B4 B1 B2 Lo 3 B3 L5 L7 L6 L8 4
  5. 5. Self-adjusting toggle clamps NEW Simply better. Push/pull clamp with horizontal base plate STC-IHH Order-No. Opening Clamping force QQ Movement of the handle is converted into an axial movement of the push/pull rod mm " N lbs. kg qty. VB0003 QQ Automatic distance adjustment up to STC-IHH25 16 ⅝ 2500 550 0.42 6 16 mm (⅝ In.) with unchanged clamping a b c d e force – withoutahaving to make manual e f x b c d f changes to the position of the pressure screws QQ Clamping force variable up to 2,500 N (550 lbs) depending on the adjustment of the set screw in the cantilevered joint QQ Sturdy, tempered metal sheets for a long service life QQ Hole pattern on the base plate facilitates fast and secure clamping set-up for metric and imperial QQ High-quality two-component plastic handleTable of dimensions Spindle adjustment range Length of hole spacing 2 Length of hole spacing 3 Length of 2-comp handle Width of 2-comp. handle Length of hole spacing 1 Height of handle (down) Height of handle (open) Length of extension arm Width of extension arm Pressure plate diameter Height of extension arm Width of elongated hole Width of extension arm Length of base plate 1 Length of base plate 2 Height of spindle, cpl. Width of base plate Diameter of hol Length of base Height of base Total length (external) (internal) Order-No. L1 L2 L3 L4 L5 L6 L7 L8 H1 H2 H3 H4 H5 B1 B2 B3 B4 Lo1 Lo2 Lo3 Lo4 Ø STC- mm 225-245 – – 23 148 64 50 53 46 160 – – 20 12 – 26 57 25,4 25,4 38 32-44 6,3 IHH25 " 8.86-9.65 – – 0.91 5.83 2.52 1.97 2.09 1.81 6.30 – – 0.79 0.47 – 1.02 2.24 1.00 1.00 1.50 1.26-1.73 0.25 H1L4 H5 L5 H2 L1 Lo 2 Lo 1 Lo 4 B4 B1 Lo 3 B3 L5 L7 L6 L8 5
  6. 6. Machine table clamp For clamping onto the machine table Rapid, powerful and safe when clamping to clamp GRS can be tilted and are infinitely equipment adjustable. The BS identifies a lever mechanism that facilitates quick clamping and releasing. At BESSEY you will also find a range of practical When unobstructed access to the work area is a work table clamps – ideal clamps for assembly, requirement or when clamping has to be done in drilling, rubbing, milling, grinding, honing, eroding, confined spaces, the claw machine clamp GRS testing and much more. Original BESSEY BAS provides the necessary function thanks to an clamps are characterised above all by their externally-positioned spindle. And, thanks to its incredibly compact design and high clamping swivelling pressure plate, the BSG work table pressure. The housings and clamping arms are clamp also provides the answer when clamping made from tempered stainless steel and are sloping parts, up to 35 degrees. As you can see, therefore extremely heavy duty – even after many a comprehensive product range of products that years of use and in the most restricted spaces. leaves virtually no desire unanswered! The work table clamps BS and the claw machine6
  7. 7. Machine table clamp Simply better. 1 2 1 4 2 1 4 5 2 3 5 3Your benefits at a glance:1 Housings and clamping arms made 4 Time-saving automatic clamping from tempered stainless steel and release system BAS clamps are approx. 30 % smaller Only the BAS-U matic clamp is than comparable tools made by com- equipped with this function which petitors and still provide the same high a ­ utomatically fastens and releases clamping forces. At a perpendicular to the work table clamp. During the the jaw face, the self-locking worm gear c ­ lamping process, a hardened flat unit exerts up to 16,000 N. spring automatically presses on the2 Clamping arm variants underside of the screw head. with polyamide seal Pressing on the release button on To provide for gentle clamping with the back side releases it easily from o ­ ptimum weight distribution, the short the table. and long clamping arms of the BAS 5 Space saving and adjustable models are equipped with a swivelling The compact design, both in height aluminium pressure shoe. And when and surface requirements, distinguishes clamping has to be done in corners, all of the models. Clamping height (up to BSP models equipped with a pointed 100 mm) can be increased progressively clamping arm are the perfect tools. in 80 mm steps with the BESSEY BASO A special polyamide seal protects the base unit. When using more than one interior against dirt. base unit, care must be taken to provide3 Open or closed fastening holes precise workpiece contact surfaces. Models with an open hole can be clamped and unclamped more quickly. In closed versions, the screw, nut and clamp form a unit. All BAS clamps are easily fastened and released – thanks to the T bar wrench with an integrated hexagon ball head. 7
  8. 8. Machine table clamps BAS-U matic clamp, fixing hole open Throat Order-No. Opening depth mm mm kg qty. VB0003 BAS-U9-4 90 47 1.25 1 BAS-U10-6 100 67 1.35 1 a b c d e f BSP-U10-6 100 67 1.35 1 QQ Clamping force up to 16,000 N QQ Space-saving design QQ With time-saving automatic clamping and release system QQ Fixing hole open for M 10 / M 12 BAS-C compact clamp, fixing hole open Throat QQ Clamping force up to 16,000 N Order-No. Opening depth QQ Space-saving design mm mm kg qty. VB0003 QQ Fixing hole open for M 10 / M 12 BAS-C9-4 88 40 1.30 1 BAS-C10-6 97 60 1.30 1 a b c d e f BSP-C10-6 97 60 1.30 1 BAS-CB compact clamp, fixing hole closed Throat Order-No. Opening depth mm mm kg qty. VB0003 BAS-CB 9-4 88 40 1.30 1 BAS-CB10-6 97 60 1.30 1 a b c d e f BSP-CB10-6 97 60 1.30 1 r SW 11 4,5 QQ Clamping force up to 16,000 N QQ Space-saving design 18 x 23 QQ Fixing hole closed for M 10 / M 12 SW 6 a H b1 a1 b 95 x 358
  9. 9. Machine table clamps Simply better. Base unit BASO Order- Fastening Opening height No. thread mm kg qty. VB0003 BASO 80 M10 0.45 1 a b c d e f x a b c d e f Fastening thread Centring attachment Fixing hole open QQ 0 8 mm extension 80 QQ Stackable QQ Fixinghole open, including cheese head screw 9 M12 QQ Suitable for all BESSEY BAS clamps 14 M10 95 x 35 BASKN wrench with T-bar Order- Width across Width across flats, Tommy bar No. flats, allen key ball head length mm kg qty. VB0003 BASKN SW11 SW8-SW10 230 0.30 1 230 a b c d e f x a b c d e f QQ Tbar wrench with adjustment tool for SW10 SW8 M 10/M 12 socket head screws 45,5 QQ Suitable for all BESSEY BAS clamps SW11Table of dimensions BAS Opening Opening Throat depth Distance Clamping arm Housing height Socket head Fixing hole Clamping force Order- max. opt. screws max. No. “a” “a1” “b” “b1” “r” “H” “Ø” mm mm mm mm mm mm DIN 912 N BAS-U9-4 90 45 47 28 75 81 M 10 / M 12 open 16.000 BAS-U10-6 100 45 67 28 94 81 M 10 / M 12 12.000 BSP-U10-6 100 45 67 28 94 81 M 10 / M 12 12.000 BAS-C9-4 88 42 40 36,5 75 78 M 10 / M 12 open 16.000 BAS-C10-6 97 42 60 36,5 94 78 M 10 / M 12 12.000 BSP-C10-6 97 42 60 36,5 94 78 M 10 / M 12 12.000 BAS-CB9-4 88 42 40 36,5 75 78 M 10 / M 12 closed 16.000 BAS-CB10-6 97 42 60 36,5 94 78 M 10 / M 12 12.000 BSP-CB10-6 97 42 60 36,5 94 78 M 10 / M 12 12.000 BASO 80 – – – – 80 M 10 / M 12 open – 9
  10. 10. Machine table clamps Hold down table clamps BS Clamping Order- Throat Rail Fixing height No. depth profile hole max. mm mm mm mm kg qty. VB0003 BS2N 200 100 19.5 x 9.5 10.5 1.35 1 BS3N 200 120 22 x 10,5 13 1.55 1 a b c d BS4N 200 120 28 x 11 16.5 2.65 1 BS5N 240 140 30 x 15 16.5 3.30 1 BS6N 500 140 30 x 15 16.5 4.00 1 QQ Clamping force up to 10,000 N QQ Tilting and infinitely height-adjustable QQ For drilling and light milling work QQ Lever mechanism for rapid clamping and x release H1 LxB b y a F Claw machine clamp GRS Clamping Order- Throat Rail Fixing height No. depth profile hole max. mm mm mm mm kg qty. VB0003 GRS20-12 200 123-140 28 x 11 16.5 2,90 1 a b c d x QQ Clamping force up to 7,500 N H1 QQ Swivelling, vertically infinitely adjustable clamp QQ Externally-positioned spindle to allow unobstructed access to the work area and clamping in confined spaces b (min.) QQ For drilling and light milling work b (max.) a y F10
  11. 11. Machine table clamps Simply better. Hold down table clamps BSG Clamping Order- Throat Rail Fixing hight No. depth profile hole max. mm mm mm mm kg St. VB0003 BSG21-14 210 140 30 x 15 16.5 3.22 1 a b c d e f x a b c d e f 122 QQ Clamping force up to 12,000 N x QQ Forfixing to tables and other equipment QQ Pressure plate tilts to an angle of 35°, H1 especially for clamping sloping parts Ø 40 b 115 a Ø FTable of dimensions BS, GRS, BSG Foot „F“ Order- Opening Throat Hight of Pressure plate Rail Fixing Achievable clamping No. max. depth base dimensions Foot Foot Foot Distance to profile hole force at a clamping length width height the rail height of 50 mm “a” “b” “H1” “L x B” “y” “x” “Ø” mm mm mm mm mm mm mm mm mm mm N BS2N 200 100 260 42 x 25 100 38 25 32 19,5 x 9,5 10,5 3.500 BS3N 200 120 260 42 x 25 100 38 25 32 22 x 10,5 13 5.500 BS4N 200 120 270 48 x 31 135 49 33 42 28 x 11 16,5 7.500 BS5N 240 140 320 48 x 31 135 49 33 42 30 x 15 16,5 10.000 BS6N 500 140 580 48 x 31 135 49 33 42 30 x 15 16,5 10.000 GRS20-12 200 123-140 265 25 x 35 135 48 33 42 28 x 11 16,5 7.500 BSG21-14 210 140 322 Ø 40 135 48 33 42 30 x 15 16,5 12.000 11
  12. 12. Simply better.www.bessey.de BESSEY. Simply better.BESSEY Tool GmbH Co. KG n P. O. Box 11  54 For more than 120 years, BESSEY has continually been setting standardsD-74301 Bietigheim-Bissingen n Germany in cutting and clamping systems. Our long-term research and develop-Fon: +49 7142 401-0 n Fax: +49 7142 401-452 ment competence allows us to continuously create new, innovative pro-E-Mail: info@bessey.de ducts. BESSEY‘s top quality ­ roducts are produced from the highest qua- p lity materials, using state-of-the-art techniques. This ensures the highest degree of comfort, safety, user-friendliness and ergonomics, so that you can also benefit from our unique innovation advantage. In accordance with our company motto: „BESSEY. Simply better.“ 3008443 b xx 02/2012 The BESSEY Product Development Department reserves the right for technical alterations. Errors and omissions excepted – to the best of our knowledge the information supplied is accurate.

×