Green River Wayfinding
GR1002

Design Intent Drawings
July 2012

Developed by
Mayfield Creative in partnership
with Cygnet...
This document is a communication device for prospective bidders to understand the form and function of

© 2012 Mayfield Cr...
Code

Specification

P1

Swatch

Description

Manufacturer

Source

Dk. Blue - MP03547

Exterior Enamel Paint

PPG/Matthew...
1
3
4'-10"

P4

3

1.	 Exterior grade high performance
opaque vinyl.
Dark Blue MP03547
2.	 Exterior grade reflective vinyl...
1
3

P4

3

4'-10"

1.	 Exterior grade high performance
opaque vinyl.
Dark Blue MP03547
2.	 Exterior grade reflective viny...
1.	 Exterior grade high performance
opaque vinyl.

4

2

V1

8

2

V1

6
5

7

7
2

V1

3

3.	 Finished with Matthews Pain...
1.	 Exterior grade high performance
opaque vinyl.

P4

3
7

P2

2.	 Screen printed.

2'-0"

1

V3

3.	 Finished with Matth...
1.	 Exterior grade high performance
opaque vinyl.
2.	 Screen printed.
7'-0"

3.	 1/2” aluminum. Paint all exposed
surfaces...
1.	 1/2” aluminum or steel plate. Paint all
exposed surfaces. Bolted and epoxied
to stone slab.
2.	 Large single slab of l...
1.	 Sandblasted 1/2” deep into stone
surface. Paint filled with exterior
enamel.
2.	 Large single slab of local stone.
Anc...
2'-0"

1'-6"

1.	 Pole pocket for 1” Ø pole.

1

1

2

2.	 Double stitch hem.
3.	 16 oz double-faced vinyl with
opaque lay...
Upcoming SlideShare
Loading in …5
×

Green River Wayfinding Design Intent

696 views
600 views

Published on

Part of the bid documentation set for Green River, Wyoming wayfinding program

Published in: Design
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
696
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
4
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Green River Wayfinding Design Intent

  1. 1. Green River Wayfinding GR1002 Design Intent Drawings July 2012 Developed by Mayfield Creative in partnership with Cygnet Strategies
  2. 2. This document is a communication device for prospective bidders to understand the form and function of © 2012 Mayfield Creative (MC). All rights reserved. All elements that constitute exterior sign elements. It includes scaled drawings, specifications and a materials aesthetic format contained in this document are the & finishes schedule for the preparation of bids to fabricate and install signage for the Green River, WY that this material is proprietary and agrees not to wayfinding program. use parts thereof, without the written consent of MC, design concepts, production art, written content and legal property of MC. The recipient acknowledges use or disclose this material, or to make copies or as long as the material remains confidential and property known only by MC. These drawings shall not be used as shop drawings, rather as Design This document represents Mayfield Creative’s Design Intent and shall not be used as shop drawings. Intent only. All dimensions, engineering compliance and site conditions shall be verified by the contracted fabricator/installer. MC shall be notified of any and all discrepancies, variations or substitutions from Access to the project website will be given to the contracted sign vendor to download production art and these documents. Shop drawings, specification details and samples shall be submitted to MC for approval prior to proceeding with fabrication. All final template files for use in fabrication. sign messages and document specifications shall be proofread by the client and legal requirements checked by their legal counsel. Production artwork, graphics, design concepts and formulas shall be used solely for the execution of the project represented in this document. They may not be used in the course of future projects, resold or reconstituted without written consent of MC. Green River Wayfinding GR1001 Design Intent Overview 2
  3. 3. Code Specification P1 Swatch Description Manufacturer Source Dk. Blue - MP03547 Exterior Enamel Paint PPG/Matthews Paint www.ppg.com/coatings/matthewspaint P2 Dark Green MP14740 Exterior Enamel Paint PPG/Matthews Paint www.ppg.com/coatings/matthewspaint P3 Light Blue MP01063 Exterior Enamel Paint PPG/Matthews Paint www.ppg.com/coatings/matthewspaint P4 Light Green MP11856 Exterior Enamel Paint PPG/Matthews Paint www.ppg.com/coatings/matthewspaint P5 Dark Grey MP10269 Exterior Enamel Paint PPG/Matthews Paint www.ppg.com/coatings/matthewspaint P6 White enamel screen print ink 59000 Series Enamel NAZDAR http://www.nazdar.com V1 White - A7801-R Reflective Vinyl Avery Graphics www.averygraphics.com V2 Matte White - A9002-O High Performance Opaque Vinyl Avery Graphics www.averygraphics.com V3 Blue - A9575-O High Performance Opaque Vinyl Avery Graphics www.averygraphics.com Green River Wayfinding GR1001 Design Intent It is the Fabricator’s responsibility to match all colors, finishes and materials specified in this document. Please note that visual accuracy of the colors and finishes represented in this document may not be consistent with actual manufacturer’s swatches and samples due to limitations of color printing technology. The Fabricator is required to appropriate actual color swatches and material samples from the manufacturer. If a substitute or deviation is recommended by the Fabricator, the recommendation shall be proposed in writing with a demonstration of equal or better value for consideration by the Designer. Colors & Finishes 3
  4. 4. 1 3 4'-10" P4 3 1. Exterior grade high performance opaque vinyl. Dark Blue MP03547 2. Exterior grade reflective vinyl. Dark Green MP14740 Light Green MP11856 3. Finished with Matthews Paint or Light Blue MP01063 approved equal. V3 P2 4. Galvanized rain cap. 4 1'-2" 3 1/2" 5 11 3/4" 4 1/2" 6. Aluminum z-angle bar brackets fill weld to back of sign panel and thru bolt to sign post. 6 8 7 7. 4”Ø galvanized steel post. Fabricator to engineer wall thickness. V1.18 8. Tamper-proof thru-bolts, lock washers and nuts. 9. FHWA-approved Transpo PoleSafe® breakaway supports to be attached to J-bolts below and base flange above (or approved equal). Coupling to be engineered and installed according to manufacturer’s specifications. 2 6 V1 10. 3000 psi concrete foundation cylinder. Fabricator to engineer dimensions. 11'-0" 12'-0" 5 3/4" 7'-1" 7 6 3/4" 6'-8" 5. 1/8” aluminum sheet. 5 10" 2 1/2" 8 11. Galvanized “J” anchor bolts. 12. Panel clearance must be raised to 7’-0” if the sign is placed within a pedestrian access area. 3 P1 3 P3 NOTE: Fabricator is responsible for all structural engineering for maximum wind load and foundation compliance. 5'-0" 4" Contact Mayfield Creative by email at projects@axiac.com for access to the project website for production-ready art and graphic templates. 12 9 1'-3" 1 FRONT VIEW SCALE: 1/2”=1’-0” 2'-4" 11 10 2 SIDE VIEW 3 SCALE: 1/2”=1’-0” Green River Wayfinding GR1001 Design Intent REAR VIEW SCALE: 1/2”=1’-0” Elevations Sign Type(s): V1 4
  5. 5. 1 3 P4 3 4'-10" 1. Exterior grade high performance opaque vinyl. Dark Blue MP03547 2. Exterior grade reflective vinyl. Dark Green MP14740 Light Green MP11856 3. Finished with Matthews Paint or Light Blue MP01063 approved equal. V3 P2 10" 4. Galvanized rain cap. 4 5 1'-2" Exp Island 2 8 V1 4'-3" 11 3/4" 4 1/2" 3'-11" 3 1/2" 5 Splash Park 7. 4”Ø galvanized steel post. Fabricator to engineer wall thickness. V2.3 7 7 8. Tamper-proof thru-bolts, lock washers and nuts. 2 1/2" P1 11'-0" P3 9. FHWA-approved Transpo PoleSafe® breakaway supports to be attached to J-bolts below and base flange above (or approved equal). Coupling to be engineered and installed according to manufacturer’s specifications. 10. 3000 psi concrete foundation cylinder. Fabricator to engineer dimensions. 6 12'-0" 3 6. Aluminum z-angle bar brackets fill weld to back of sign panel and thru bolt to sign post. 6 8 3 5. 1/8” aluminum sheet. 11. Galvanized “J” anchor bolts. 7'-9" NOTE: Fabricator is responsible for all structural engineering for maximum wind load and foundation compliance. Contact Mayfield Creative by email at projects@axiac.com for access to the project website for production-ready art and graphic templates. 4" 9 1'-3" 1 FRONT VIEW SCALE: 1/2”=1’-0” 2'-4" 11 10 2 SIDE VIEW 3 SCALE: 1/2”=1’-0” Green River Wayfinding GR1001 Design Intent REAR VIEW SCALE: 1/2”=1’-0” Elevations Sign Type(s): V2 5
  6. 6. 1. Exterior grade high performance opaque vinyl. 4 2 V1 8 2 V1 6 5 7 7 2 V1 3 3. Finished with Matthews Paint or approved equal. 4. Galvanized rain cap. 5 3'-5" Public Parking P4 P1 8 5. 1/8” aluminum sheet. 6. Aluminum z-angle bar brackets fill weld to back of sign panel and thru bolt to sign post. 7. 4”Ø galvanized steel post. Fabricator to engineer wall thickness. 8. Tamper-proof thru-bolts, lock washers and nuts. 9. FHWA-approved Transpo PoleSafe® breakaway supports to be attached to J-bolts below and base flange above (or approved equal). Coupling to be engineered and installed according to manufacturer’s specifications. 6 10'-5" 10. 3000 psi concrete foundation cylinder. Fabricator to engineer dimensions. 11. Galvanized “J” anchor bolts. NOTE: Fabricator is responsible for all structural engineering for maximum wind load and foundation compliance. 7'-0" 5 3/4" 4 1/2" 3" 1'-4" P 3 2. Exterior grade reflective vinyl. 3" 1 FRONT VIEW SCALE: 1/2”=1’-0” 2 Contact Mayfield Creative by email at projects@axiac.com for access to the project website for production-ready art and graphic templates. SIDE VIEW 3 SCALE: 1/2”=1’-0” Green River Wayfinding GR1001 Design Intent REAR VIEW SCALE: 1/2”=1’-0” Elevations Sign Type(s): V3 6
  7. 7. 1. Exterior grade high performance opaque vinyl. P4 3 7 P2 2. Screen printed. 2'-0" 1 V3 3. Finished with Matthews Paint or approved equal. 4" 1 1/2" 5 1/2" 4 2 P6 10" 5 8 2'-0" 4'-4" 4'-6" 3" Source: www.izoneimaging.com 1 1/2" 9. 3000 psi concrete foundation cylinder. Fabricator to engineer dimensions. 7 7 NOTE: Fabricator is responsible for all structural engineering for maximum wind load and foundation compliance. Contact Mayfield Creative by email at projects@axiac.com for access to the project website for production-ready art and graphic templates. P6 P3 2'-0" 6. Aluminum z-angle bar brackets fill weld to back of sign panel and thru bolt to sign post. 8. Satin exterior IZone digital highpressure Laminate (DHPL). Edge polished. Threaded hardware inserted directly into the rear of the material for installation. Consult with fabricator for installation/replacement options. 1'-0" 6'-6" 5. 1/8” aluminum sheet. Paint all exposed surfaces. 7. 4”Ø galvanized steel post. Prepare surface to receive enamel paint. Fabricator to engineer wall thickness. close top of pole with flat plate. Grind welds and paint to match pole surface. 8 P1 4. 1/4” aluminum sheet. Paint all exposed surfaces. Pin-mount to aluminum cabinet. Secure with epoxy. 9 1 FRONT VIEW 2 SCALE: 1”=1’-0” Green River Wayfinding GR1001 SIDE VIEW SCALE: 1”=1’-0” Design Intent 3 SECTION SCALE: 1”=1’-0” Elevations Sign Type(s): D1 7
  8. 8. 1. Exterior grade high performance opaque vinyl. 2. Screen printed. 7'-0" 3. 1/2” aluminum. Paint all exposed surfaces. Pin-mount to substrate. 4'-10" 2 8 3 P5 1 V2 4. Aluminum cabinet covered with a matte faux finish to resemble stone. Cover all exposed surfaces. 3 P4 3 P2 5. Stacked stone column with full cap stone. 3" 4 1'-2" 1" W C O M E E L 6. 3000 psi concrete foundation cylinder. Fabricator to engineer dimensions. 1'-10" T O 3 4 3 Contact Mayfield Creative by email at projects@axiac.com for access to the project website for production-ready art and graphic templates. 1 9 5'-6" 3'-2" 4'-6" 5 NOTE: Fabricator is responsible for all structural engineering for maximum wind load and foundation compliance. 8 3/4" 7" 3 3 3 P5 5 V2 6 1 FRONT VIEW 2 SCALE: 3/4”=1’-0” Green River Wayfinding GR1001 Design Intent SECTION SCALE: 3/4”=1’-0” Elevations Sign Type(s): G1 8
  9. 9. 1. 1/2” aluminum or steel plate. Paint all exposed surfaces. Bolted and epoxied to stone slab. 2. Large single slab of local stone. Cut square. Flame finish. 1 3. 1/2” aluminum or steel plate. Paint all exposed surfaces. Structurally integrated into stone columns. Bolted and epoxied to stone slab. P5 4. 1/2” aluminum or steel plate. Paint all exposed surfaces. Welded to vertical supports. Bolted and epoxied to stone slab. 2 5. Hex-bolts and lock washers. Engineer bolt-stone connection to accommodate stone expansion and contraction. NOTE: Fabricator is responsible for all structural engineering for maximum wind load and foundation compliance. 3 4 5 1 P5 Contact Mayfield Creative by email at projects@axiac.com for access to the project website for production-ready art and graphic templates. P5 P5 REAR VIEW SCALE: 3/4”=1’-0” Green River Wayfinding GR1001 Design Intent Elevations Sign Type(s): G1 9
  10. 10. 1. Sandblasted 1/2” deep into stone surface. Paint filled with exterior enamel. 2. Large single slab of local stone. Anchored into sub-grade concrete foundation. 3. 3000 psi concrete foundation. Fabricator to engineer dimensions. 2 10 6'-8" NOTE: Fabricator is responsible for all structural engineering for maximum wind load and foundation compliance. 6" Contact Mayfield Creative by email at projects@axiac.com for access to the project website for production-ready art and graphic templates. V2 10 3/4" 1 2 2'-11" 5'-0" 2 3 1 FRONT VIEW 2 SCALE: 3/4”=1’-0” Green River Wayfinding GR1001 Design Intent SECTION SCALE: 3/4”=1’-0” Elevations Sign Type(s): G2 10
  11. 11. 2'-0" 1'-6" 1. Pole pocket for 1” Ø pole. 1 1 2 2. Double stitch hem. 3. 16 oz double-faced vinyl with opaque layer between vinyl faces. Graphic provided by Designer 2 4. Digital image with UV protection. 1'-6" 1 4 NOTE: Fabricator is responsible for all structural engineering for maximum wind load compliance. 4 2 4 3 3 Fish It 1 FRONT DETAIL - B1 SCALE: 1 1/2”=1’-0” IMAGE AREA 4'-0" 6'-0" 3 IMAGE AREA 6'-0" IMAGE AREA Contact Mayfield Creative by email at projects@axiac.com for access to the project website for production-ready art and graphic templates. Fish It Fish It 2 FRONT DETAIL - B2 3 SCALE: 1 1/2”=1’-0” Green River Wayfinding GR1001 Design Intent FRONT DETAIL - B3 SCALE: 1 1/2”=1’-0” Elevations Sign Type(s): B1, B2, B3 11

×