How to Repair Plastic Bodywork:
Practical, Money-Saving Techniques
for Cars, Motorcycles, Trucks, ATVs,
and Snowmobiles by Kurt Lammon
Very Detailed, Greatly Organized, And Very Helpful Book
If you do your own mechanical work, you know some repairs are possible
and others are not. Now suppose a whole range of impossible repairs
suddenly were made practical and easy! Let plastic repair industry guru
Kurt Lammon show you the ropes in his book How To Repair Plastic
Bodywork. The original color edition of this book is now out of print,
replaced by this freshly designed black and white version that steps Do-It-
Yourself restorers carefully through each step of the plastic repair process.
Cars, motorcycles, ATVs, snowmobiles, and even household appliances
all have plastic parts that can be repaired properly with the right
techniques.

Personal Review: How to Repair Plastic Bodywork: Practical,
Money-Saving Techniques for Cars, Motorcycles, Trucks, ATVs,
and Snowmobiles by Kurt Lammon
I bought this book [and later the "how to" video].
As far as I know, this is the only layman's plastic repair book out there.
[I'm sure there are engineering books on the subject, but I only want to
know how to fix plastic, not formulate it].
A great balance of how-to text with corresponding how-to photos [photos
are in full color and are high quality].
An excellent alternative to sending your simple repairs off to someone else
to fix.
Depending on the plastic repair to be done, you can probably buy a basic
"repair kit" along with this book; and do the job yourself.
I work on all sorts of computer peripherals [like printers].
The reason most every computer and peripheral is so lightweight today [as
compared to just 5 years ago] is PLASTIC.
Folks tend to whine about parts being made from "cheap plastic", but just
wait until a part breaks and you need to replace it. Those parts are never
CHEAP.
The information I learned from this book has saved me having to buy
several plastic parts for inkjet and laserjet printers.
If I have both halves of the broke part, I can fix it.
The author of the book is president of Urethane supply company.
[as per the closing page of this book].
I contacted the company after reading this book and the customer support
at Urethane supply is excellent.
I asked some questions about a repair not specifically mentioned in the
book and their support folks did an "on-the-spot" R&D of the problem and
emailed me their results about how to fix the plastic parts involved.
If you want to fix your own plastics, I highly recommend this book.
With just a couple small repairs, I paid for the cost of:
1. this book,
2. their how-to video and
3. the small repair kits used to fix the problems

For More 5 Star Customer Reviews and Lowest Price:
How to Repair Plastic Bodywork: Practical, Money-Saving Techniques for Cars,
Motorcycles, Trucks, ATVs, and Snowmobiles by Kurt Lammon 5 Star Customer
Reviews and Lowest Price!