GP Batetry GP40AAAM Datenblatt Datasheed

642 views
584 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
642
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

GP Batetry GP40AAAM Datenblatt Datasheed

  1. 1. Data Sheet Model No.: GP40AAAM `Type : Rechargeable Nickel Metal Hydride Fast Charge (charge control required) Cylindrical Cell Voltage (V) 1.6 Nominal Dimension : Φ = 10.2 mm 400mA (with Sleeve) H = 29.2 mm 1.5 (1C) Applications : Recommended discharge current 40 to 1200mA 1.4 Nominal Voltage : 1.2V 200mA 1.3 (0.5C) Capacity : Minimum: 400mAh Typical: 428mAh 1.2 when discharged at 0.2C to 1.0V at 20oC 1.1 0 20 40 60 80 100 120 140 160 Charging Condition : 40mA for 16 hrs at 20 Co Capacity Input ( % ) Fast Charge : 200mA to 400mA (0.5 to 1C) Low rate discharge charge termination control recommended Voltage (V) control parameters: 1.5 -∆V : 0 - 5mV 1.4 o DT/dt ** : 0.8oC/min (0.5 to 0.9C) Charge: 40mA x 16hrs at 20 C : 0.8 - 1oC/min (1C) 1.3 TCO ** : 45 - 50oC 1.2 Timer **: 105% nominal input 1.1 ** For reference only 1 Service Life : >500 cycles (IEC standard) 0.9 200mA 80mA 40mA Continuous : 40 mA maximum current for 1 year 0.8 (0.5C) (0.2C) (0.1C) Overcharge No conspicuous deformation 0.7 And/or leakage 0 2 4 6 8 10 12 14 Weight : 7.7 g Discharge Time ( Hrs ) High Rate Discharge Internal Resistance : Average 65 mΩ upon fully charged (Range 48 – 80 mΩ Voltage (V) 1.5 Max. Charging Voltage : 1.5V at 40 mA charging 1.4 o Charge: 40mA x 16hrs at 20 C 1.3 Ambient Temperature : Standard Charging : 0 to 45oC 1.2 Range Fast Charging : 10 to 45oC Discharging : -20 to 50oC 1.1 Storage : -20 to 35oC 1 0.9 1200mA 800mA 400mA +0 0.8 (3C) (2C) (1C) 10.2 4.7 (Ref) 0.7 -0.2 0 10 20 30 40 50 60 70 Discharge Time ( Mins ) * The information (subject to change without prior +0 notice) contained in this document is for 29.2 Unit : mm -0.7 reference only and should not be used as a basis for product guarantee or warranty. For applications other than those described here, please consult your nearest GP Sales and Marketing Office or Distributors. Manufacturer reserves the right to alter or amend the design, model and specification without prior notice. TRS0219 Rev.02

×