Hybrid vehicle safety personal protection equipment by alan crouch

  • 2,249 views
Uploaded on

This short video is about using personal protection when working on hybrid vehicles.

This short video is about using personal protection when working on hybrid vehicles.

  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
    Be the first to like this
No Downloads

Views

Total Views
2,249
On Slideshare
0
From Embeds
0
Number of Embeds
0

Actions

Shares
Downloads
19
Comments
0
Likes
0

Embeds 0

No embeds

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide

Transcript

  • 1. Personal Protection Equipment (PPE) This is a short video by Alan Crouch about what personal protection equipment is needed to service hybrid vehicles properly.
  • 2. How can you be safe around such high voltage? Hybrid vehicles can generate up to 600 AC volts.
  • 3. Hybrid vehicles can be dangerous unless you are properly protected. Not using approved equipment or equipment needing repair can be dangerous.
  • 4. To be safe, you need to follow the manufacturer safety requirements and have the proper equipment. That equipment should consist of approved rubber and leather gloves, safety glasses , the proper digital volt/ohm meter, danger signs to warn others and emergency cones placed around the vehicle.
  • 5. This vehicle is ready to be worked on. It has the emergency cones in place and a sign notifying others to be careful. Remember that the ignition key should be properly stored at least 15 feet away from the vehicle. Now its time to get yourself protected.
  • 6. Hybrid vehicles use a regular 12 volt battery system. They also use a “high voltage” system . The high voltage wires have an orange color outer coating to identify them. Always be protected when working around the orange cables.
  • 7. With safety glasses in place, check the rubber gloves date of inspection and do not use them if it is over 6 months old. Test the rubber gloves for air leaks and check the leather gloves for excessive wear. Put the rubber gloves on first and then the protective leather gloves. They must be inspected every 6 months.
  • 8. Notice how the rubber gloves must extend at least ½” beyond the end of the leather gloves for proper fit.
  • 9. Now you are ready to begin working on your hybrid vehicle. Take your time and be careful to work safely. High voltage can be deadly!
  • 10. Don’t let carelessness cause this to happen to you. Protect yourself when working around high voltage!