The following designs show NOT complete design of objects but press fit JOINTS and could be applied in Building OFFICE PARTITIONS and FURNITURE RODUCTIONS. Press Fit Joints

Production… The different joints designed and ‘plotted’ on the Laser Cutter…

PRESS FIT JOINTS The three types of the Joints that I needed to introduce here are Cross/ joining 4 parts/ Kidney type Other angles as to the need of the user, example shown 60’

The three types of the Joints that I needed to introduce here are

Cross/ joining 4 parts/

Kidney type

Other angles as to the need of the user, example shown 60’

1. Kidney Type Joint Here the Joint used is 90’ (Notice the body of the Joint)

I think this Joint can also be used in steel structures made of steel and aided with Welding… 2. Square Cross Type Joint

Other Angles Angles may be set according to users’ need and should be determined as to put the body of the joint Inside or Outside the object to be made…

… and combinations fsdfjkasdjfksjadkfjsadkfjasjdkfjsdjfsajdkfksadj Other 60deg. Kidney type 90 deg