Product Profile Contractors Pollution Liability Cpl Aig Environmental Business Solutions
PRODUCT PROFILE: POLLUTION LIABILITY
BUSINESS SOLUTIONS FOR GENERAL CONTRACTORS, STREET AND ROAD CONTRACTORS,
MAINTENANCE, MARINE AND MECHANICAL CONTRACTORS, ELECTRICAL CONTRACTORS,
DEMOLITION CONTRACTORS, TRADE, HVAC AND INDUSTRIAL CONTRACTORS, ENVIRON-
MENTAL REMEDIATION/ABATEMENT CONTRACTORS, RESPONSE ACTION/EMERGENCY
SPILL RESPONSE CONTRACTORS, HOME BUILDERS AND DEVELOPERS (CLAIMS MADE ONLY)
Contractors of all disciplines can create or worsen a pollution condition when providing services. Whether an
environmental contractor causes a pollution release during an excavation or a utility contractor hits an
underground pipeline – contractors can be held liable in the event of a pollution accident. AIG Environmental
recognizes the different risk management needs of the contracting industry and offers Contractors Pollution
Liability (CPL) to address a wide range of contractor’s specialties.
Contractors Pollution Liability (CPL) from AIG Environmental helps to protect an insured contractor against
pollution liabilities resulting from the performance of construction activities, even for work completed by
subcontractors. With contractor’s environmental coverage, AIG Environmental offers contractors a
business-critical solution to minimize loss for liabilities when sudden or gradual pollution conditions become a
job-related issue. That potential loss, though infrequent, can be severe and is typically left uncovered by
standard general liability programs with limited “buy backs” or restrictive exclusion clauses.
Protection for Pollution Liabilities
CPL is designed for the specific pollution liability risks contractors face, allowing them to focus on day-to-day
operations and on finishing each job on time and within budget. Insured contractors are covered for
environmental liabilities resulting from:
• Construction and remediation operations, whether performed by the contractor or subcontractors
• Claims alleging improper supervision of subcontractors
• Third-party bodily injury
• Third-party property and environmental damage
• Cleanup costs, for pollution conditions both on and migrating from the work site
Negotiate Contracts with Confidence
In contract negotiations, this coverage may assist the contractor with hold harmless or indemnification language
requested by the owner. CPL can help provide protection against third-party claims for pollution-related bodily
injury and property damages arising out of contractual liabilities assumed by the insured contractor and
excluded under the Insured’s Commercial General Liability policy.
Claims Made and Occurrence Basis
CPL is available on both a claims made basis and on occurrence as Contractors Pollution Occurrence (CPO).
In fact, AIG Environmental was the first insurer to offer contractor’s pollution liability on an occurrence basis for
eligible contractors. With occurrence-based coverage, claims may be reported during or after the policy period
pursuant to the terms of the policy, provided the covered damage occurred during the policy period.
CPL is available on a blanket-basis covering scheduled contractors operations at numerous sites, or on a project-specific
basis. Project-specific contractor controlled coverage may include work on infrastructure construction, single or multiple-
site projects, land or marine-based projects, Superfund and Brownfield sites or other remedial/construction projects.
Increased limits may be available to meet contract requirements for specific projects.
Business Solutions for:
1. POLLUTION RESULTING FROM ON-SITE ACCIDENTS
Overview – Compliance Inspection of an Existing UST
A service station hired a general contractor to complete major renovations, which included adding three gas pumps.
Before renovations began, the contractor hired a reputable environmental contractor to inspect all existing underground
storage tanks (USTs). The report findings showed no evidence of leaking or corrosion.
Problem – Spilled Fuel Leads to Costly Remediation
While conducting the storage tank inspection, the environmental contractor’s probe ruptured a diesel fuel line on one of
the tanks, spilling more than 11,000 gallons of diesel, of which 4,000 gallons were recovered. Tests conducted on the
soil revealed extensive on-site contamination as well as some off-site soil contamination. In addition, the service station
was shut down during the cleanup process. The service station management filed a claim that alleged when the general
contractor signed the contract he assumed liability for pollution-related damages caused by the environmental contractor.
The court found the general contractor liable for all cleanup costs and claims for lost profits from the service station in the
amount of $600,000.
Solution – A Solution That Protects All Parties
CPL helps to protect a contractor against potentially devastating costs that arise from pollution conditions caused by work
performed by the insured or a subcontractor. This policy covers both on-site pollution conditions and those migrating
from the site to an off-site location that result in cleanup costs, as well as third-party pollution condition-related property
damages that may not be covered under the contractor’s CGL policy.
• CPL can cover pollution conditions, resulting from covered operations, that are discovered after the completion of a project.
• Protection is provided against claims arising from both sudden and gradual pollution conditions. This is especially relevant when
dealing with items such as an underground storage tank, where contamination can occur for years before it is discovered.
2. PAVING AND INFRASTRUCTURE CONSTRUCTION PROJECTS
Overview – Construction of New Roads
Construction of new roadways is a complex process. The land is prepared and a gravel bed is then laid on top. Next,
two different coats of asphalt are laid on top of the gravel. The first is a thick, coarse layer that provides the foundation
upon which a thinner layer of finished asphalt is applied. To assist in adhesion, a tack layer of sealant is often applied
on the gravel bed and between layers.
Problem – Pollution Condition Caused by Inclement Weather
A city hired a paving contractor to finish six roads, two primary and four cul-de-sacs. The size of the job required that
the contractor apply 2,800 gallons of oil-based sealant. However, before the sealant could dry, precipitation washed
it off the roads and into the city’s storm drains and a nearby stream. The oil-based sealant was found to be potentially
harmful and the city inspector ordered the contractor to clean it up. Fifty property owners who lived along the stream
filed suit for bodily injury and property damage as a result of the washout. The contractor paid all costs associated with
the cleanup and settlements for approximately $500,000.
Solution – Protection from Pollution Conditions Resulting from Construction Operations
CPL can help provide the assurance that pollution conditions from unexpected events will not become a financial burden
on the contractor by providing coverage for liability associated with cleanup costs and third-party property damage
compensation claims due to pollution conditions caused by covered operations.
• CPL helps to protect contractors from third-party claims for bodily injury and property damage resulting from pollution
conditions arising out of covered operations. This is especially useful for jobs where neighbors’ properties or businesses
are potentially affected by the execution of the contract.
• Protection against claims for cleanup costs where mandated by a governmental agency.
3. USING SUBCONTRACTORS TO IMPROVE PROFITABILITY
Overview – Who is Accountable When a Subcontractor is Used?
Few general contractors can perform all of the work on a project and still maximize efficiency. Usually specialists are
hired who can finish certain areas of the project quicker and cheaper. This not only saves time and money; it allows
the general contractor to allocate resources to areas where they are better served. Unfortunately, using subcontractors
reduces the general contractor’s level of control, potentially increasing the risk of an accident. In the end, environmental
liability for the project rests with the general contractor.
Problem – Responsibility for Pollution Costs
A general contractor was hired to remove PCB transformers at a warehouse. After thorough evaluation and
verification of credentials, training procedures and state and federal licensing, several remediation subcontractors
were brought in to assist in the project. One of the subcontractors was removing PCB oils from transformers located
on the roof when contaminated oil spilled through an opening and splattered over the interior of the building. The
owner of the warehouse sued to recover cleanup costs resulting from the spill incident. The subcontractor also sued
the contractor, claiming it was not responsible for the spill but that the cause of the accident was a result of the
general contractor’s negligence in meeting environmental regulations. The general contractor was found liable for
cleanup costs of approximately $250,000, not including litigation expenses.
Solution – Freeing the Contractor to Complete the Job
This is where CPL adds extra value to a contractor by providing the contractor liability protection for pollution or
environmental contamination resulting from operations completed by a subcontractor — allowing the general contractor
to focus on getting the job done right, on time and within budget.
• Protection against claims alleging improper supervision of subcontractors is especially valuable on larger jobs requiring many
1. CONTRACTORS POLLUTION LIABILITY (CPL) APPLICATION
2. PROJECTS MUST INCLUDE: JOB SPECIFICATIONS, BACKGROUND ENGINEERING AND
FOR MORE INFORMATION ON AIG ENVIRONMENTAL CONTACT:
Contact us at 1-800-348-4314 Department CPL
Visit us at www.aigenvironmental.com
Send e-mail to email@example.com
AIG Environmental Home Office
175 Water Street, 12th Floor, New York, NY 10038
The scenarios summarized above are offered only as examples. Coverage depends on the actual facts of each case and the
terms, conditions and exclusions of each individual policy. Anyone interested in the above product(s) should request a copy
of the policy itself for a description of the scope and limitations of coverage. Policy terms may vary based on individual state
requirements and may not be available in all states.
Insurance underwritten by member companies of American International Group, Inc. (AIG). The description herein is a
summary only. It does not include all terms, conditions and conditions of the policies described. Please refer to the actual
policies for complete details of coverage and exclusions. Coverage may not be available in all states. Issuance of coverage is
subject to underwriting.
Printed on recycled paper. 90512 ( 02/2006)