Wind Energy Catalogue
Upcoming SlideShare
Loading in...5
×
 

Wind Energy Catalogue

on

  • 3,248 views

AFM seeks to use this catalogue to promote those member firms that manufacture machine tools with specific applications for machining components for wind power generators....

AFM seeks to use this catalogue to promote those member firms that manufacture machine tools with specific applications for machining components for wind power generators.

Wind power is one of the renewable energies with the most promising prospects for both the future and global growth. Its level of technological development, cost and clean and inexhaustible nature are qualities that are paving the way for its implementation.

Spanish machine tools occupy a clear position of leadership and importance on the international stage. The key to this success is none other than the trust placed in both manufacturers and in auxiliary businesses in Spain's machine tool sector.

Our firms are in a position to supply the wind power sector with solutions for gears, shafts, hubs, bearings, rings, etc.

Within a broad range of specific applications, we could highlight such processes as the turning of shafts, the machine cutting and boring of hubs, the machining of bearings and rings or the balancing of brake discs.

Statistics

Views

Total Views
3,248
Views on SlideShare
3,247
Embed Views
1

Actions

Likes
3
Downloads
50
Comments
0

1 Embed 1

http://127.0.0.1:51235 1

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

Wind Energy Catalogue Wind Energy Catalogue Document Transcript

  • w i n d e n e r g y c a t a l o g u e spanish machine tools dependability, reliability and service
  • SPANISH MACHINE TOOLS dependability, reliability and service Spain is the third largest manufacturer and exporter of machine tools in the European Union. This is the best demonstration of the extremely high level of trust our customers place in Spanish Machine Tools. A trust that has succeeded in Spanish machine tools playing a very important role in the most relevant industrial sectors of the economy such as automotive, aeronautics and aerospace, energy generation, railways, capital goods, dies and moulds or electrical appliances, amongst others, with 60% of production destined for international markets. In addition to a lengthy experience in design and manufacturing, Spanish machine tools offer a series of big competitive advantages amongst which the following can be highlighted: great flexibility for being able to adapt products to each customer's, sector's and application's specific needs, a better relationship between productivity and return on investments, a wide and complete range of more than 2,000 models and a decisive commitment to technological innovation, dedicating an average of 6% of the sector's turnover to R&D&I. combining all the sector's potential Founded in 1946, AFM, the Machine Tool Manufacturers' Association of Spain represents almost a hundred companies that account for 92% of the sector's total production in Spain. AFM's work centres on encouraging competitiveness, defending its members' interests and fostering growth in the sector. Through a very wide range of services, it helps to reinforce the international deployment of its members and further develop their ongoing commitment to technological innovation, from its head offices in the San Sebastian Technology Park and since its setting up in Tianjin (China). Nowadays AFM holds the Presidency of CECIMO, the European Committee for Cooperation of the Machine Tool Industries. In 1962, it became member of CECIMO, holding one of the permanent vice chairs. AFM is also the co-organiser, together with Bilbao Exhibition Centre, of the BIEMH, the Spanish Machine Tool Biennial, the sector's fourth largest trade fair in the world and the third in Europe.
  • WIND ENERGY TEAM AFM seeks to use this catalogue to promote those member firms that manufacture machine tools with specific applications for machining components for wind power generators. Power is one of the renewable energies with the most promising prospects for both the future and global growth. Its level of technological development, cost and clean and inexhaustible nature are qualities that are paving the way for its implementation. Spanish machine tools occupy a clear position of leadership and importance on the international stage. The key to this success is none other than the trust placed in both manufacturers and in auxiliary businesses in Spain's machine tool sector. Our firms are in a position to supply the wind power sector with solutions for gears, shafts, hubs, bearings, rings, etc. Within a broad range of specific applications, we could highlight such processes as the turning of shafts, the machine cutting and boring of hubs, the machining of bearings and rings or the balancing of brake discs. Our companies with specific production for the wind energy industry: OUR CUSTOMERS, OUR BEST REFERENCE Ve s ta s Gamesa Siemens General Electric Acciona Suzlon Ecotecnia Enercon Group 3
  • INDEX Other applications (towers, balancing of rotating parts, brakes,…) Generator (rotor, stator, Gearbox components (gears, shafts, etc.) Pitch & Yaw Bearings Flanges Frames Blades Hubs etc.) Page ALJU 4 BOST 5-6 CME 7-11 DANOBATGROUP 12-17 DANOBAT 12-15 SORALUCE 16-17 ETXE-TAR 18 FAGOR ARRASATE 19 GAMOR 20 GEKA 21-23 GH 24-25 GORATU 26 GURUTZPE 27 IBARMIA INNOVATEK 28-30 JUARISTI 31-32 KAISER SISTEMAS 33 LANBI 34 NICOLÁS CORREA 35-37 TECNOSPIRO-ROSCAMAT 38 ZAYER 39-40
  • ALJU, S.L., TALLERES Ctra. San Vicente, 17 - 48510 VALLE DE TRÁPAGA (Bizkaia) Tfno. +34 944 920 111 Fax +34 944 921 212 alju@alju.es www.alju.es APPLICATIONS GEARBOX COMPONENTS GENERATOR FLANGES HUBS OTHER APPLICATIONS SURFACE FINISHING OF WIND TURBINE COMPONENTS Customized equipment for the surface treatment of wind turbine components previous to painting and welding. This is one of the biggest suspended load automatic shot blasting machines, among our wide range of models. TECHNICAL CHARACTERISTICS Special design and high quality materials: blasting cabin of hard-wearing steel, blast wheels from 7.5 to 30 kW. Inner and outer surface finishing of towers, rotors and any parts which need surface treatment. REFERENCES SAKANA, S.COOP. FUNDICIONES WIND ENERGY CASTING, S.A. (WEC) FELGUERA MELT, S.A.U. OLAZABAL Y HUARTE, S.A. TS FUNDICIONES, S.A. ENDAKI TECNOCAST, S.A. wind energy catalogue 04
  • BOST MACHINE TOOLS COMPANY S.A. Ctra Villabona-Asteasu km 2,5 20159 ASTEASU (Gipuzkoa) tel. (+34) 943 69 23 75 fax (+34) 943 69 04 93 bost@bost.es www.bost.es APPLICATIONS GEARBOX COMPONENTS BEARINGS FLANGES FRAMES BOST T4F MILLING LATHES Bost T4F is a range of specialised milling lathes for windmill shafts. It is the ideal for machining any rolling part which need to be milled, turned, drilled, and/or tapped. Fitted with a milling head and a sword to carry out large roughing turning operations. TECHNICAL CHARACTERISTICS REFERENCES Gröditzer Kurbelwelle Sidenor Ellwood Group Celsa Cnim wind energy catalogue 05
  • BOST MACHINE TOOLS COMPANY S.A. Ctra Villabona-Asteasu km 2,5 20159 ASTEASU (Gipuzkoa) tel. (+34) 943 69 23 75 fax (+34) 943 69 04 93 bost@bost.es www.bost.es APPLICATIONS GEARBOX COMPONENTS BEARINGS FLANGES FRAMES BOST VTL C VERTICAL TURNING AND MILLING MACHINES VTL C are very stiff and high accuracy vertical turning and milling centres specially designed for the windmill components machining. This vertical lathes are manufactured with a turning capacity from 1.600 mm up to 6.300 mm and can be supplied with one or two RAM-s, different solutions for ATC, hydrostatic guideways, etc. TECHNICAL CHARACTERISTICS Max. Swing (mm): 6.300 Max table diameter (mm): 5.300 Max load on the table (kg): 150.000 X, Z, hydrostatic “C” , “Y” axis REFERENCES Enercon Harai Inmapa Sket Iturle CAF WKFS Cadinox Matricir Forgerossi Yurre Xian Aeroengine wind energy catalogue 06
  • MAQUINARIA CME, S.A. Pol. Ind. Parcela N2B - Apdo. 46 - 20829 ITZIAR-DEBA (Gipuzkoa) Tfno. +34 943 199 306 Fax +34 943 199 244 commercial@cmemach.com www.cmemach.com APPLICATIONS HUBS FRAMES OTHER APPLICATIONS TRAVELLING COLUMN MILLING MACHINES FCP & FCL FCP and FCL are both identical travelling column machines. The difference is that FCP has prismatic guideways and FCL linear ones. The machine can have different configurations, with rotary tables, manual, automatic, orthogonal milling heads, quill, pendular, carenages, tables… TECHNICAL CHARACTERISTICS X (mm) : 3.000 - 20.000 Y (mm) : 1.200 / 1.500 Z (mm) : 1.000 / 1.500 / 2.000 / 2.500 RPM : 3.000 - 18.000 Tape Shank : ISO 50 Feeds (m/min): 20 KW : 22 / 28 REFERENCES VESTAS GAMESA SIEMENS GENERAL ELECTRIC ACCIONA wind energy catalogue 07
  • MAQUINARIA CME, S.A. Pol. Ind. Parcela N2B - Apdo. 46 - 20829 ITZIAR-DEBA (Gipuzkoa) Tfno. +34 943 199 306 Fax +34 943 199 244 commercial@cmemach.com www.cmemach.com APPLICATIONS HUBS FRAMES OTHER APPLICATIONS MILLING MACHINE GT The GT range is built to give a solution to those customer who require spetial solutions like for example adding rotary tables or travelling columns to bed type milling machines. Fixed or automatic quills or continuous rotary tables (with maximum load up to 30 Tn) can also be added. TECHNICAL CHARACTERISTICS X (mm): 2.000 - 4.000 Cross Column (Z) (mm): 1.000 - 2.500 Cross ram (Z’) (mm): 1.000 - 1.500 Cross quill (W) (mm): 500/700 Quill diameter (mm): 110/130 Vertical (Y) (mm): 1.000/1.500/2.000 Rotary table (mm): 1.500 x 1.500 - 2.500 x 2.500 Feeds (mm/min): 0 - 20.000 Spindle Power (Kw): 22 - 35 Rpm: 5.000 REFERENCES VESTAS GAMESA SIEMENS GENERAL ELECTRIC ACCIONA wind energy catalogue 08
  • MAQUINARIA CME, S.A. Pol. Ind. Parcela N2B - Apdo. 46 - 20829 ITZIAR-DEBA (Gipuzkoa) Tfno. +34 943 199 306 Fax +34 943 199 244 commercial@cmemach.com www.cmemach.com APPLICATIONS HUBS FRAMES OTHER APPLICATIONS BORING-MILLING MACHINE MB The MB has been developed to satisfy the needs of the top demanding companies at technological level. It is rigid, precise and due to the portal column construction, the combination of double ballscrews in vertical axis, the rack and pignion system for the X axis movement and the lineal guideways in the three axis, the machine has became a reference in the market for the big boring milling machine market. TECHNICAL CHARACTERISTICS X (mm) : 3.000 - 20.000 Y (mm) : 1.200 / 1.500 Z (mm) : 2.000 - 5.000 RPM : 0 - 4.000 Tape Shank : ISO 50 Feeds (m/min): 30 KW : 35 REFERENCES VESTAS GAMESA SIEMENS GENERAL ELECTRIC ACCIONA wind energy catalogue 09
  • MAQUINARIA CME, S.A. Pol. Ind. Parcela N2B - Apdo. 46 - 20829 ITZIAR-DEBA (Gipuzkoa) Tfno. +34 943 199 306 Fax +34 943 199 244 commercial@cmemach.com www.cmemach.com APPLICATIONS HUBS FRAMES OTHER APPLICATIONS MILLING MACHINE MP The MP is a travelling column milling machine with feeds up to 35 meters/minute and several configurations, like working in pendular, with integrated rotary table or magnetic plates, different milling heads (manual, automatic, orthogonal, continuous…), various solutions regarding the carenage, and also the possibility to add lineal drived rotary table in order to do turning or grinding operations. TECHNICAL CHARACTERISTICS Table (mm): X + 500 x 1.200 X (mm): 3.000 - 20.000 Y (mm): 1.200 Z (mm): 1.100 / 1.600 RPM : 4.000 /5.000 /8.000 /18.000 Tape Shank: ISO 40-50 / HSK 63 Feeds(m/min): 35 KW: 22 / 27 REFERENCES VESTAS GENERAL ELECTRIC GAMESA ACCIONA SIEMENS wind energy catalogue 10
  • MAQUINARIA CME, S.A. Pol. Ind. Parcela N2B - Apdo. 46 - 20829 ITZIAR-DEBA (Gipuzkoa) Tfno. +34 943 199 306 Fax +34 943 199 244 commercial@cmemach.com www.cmemach.com APPLICATIONS HUBS FRAMES OTHER APPLICATIONS MILLING MACHINE MQ It is the major machine CME builds along with the MB model. It is completely built in prismatic guideways and it has a unique solution in the vertical axis with two (2) ballscrews in order to correct mechanically the effect of the gravity to the ram. Either automatic quills or heads can be added. TECHNICAL CHARACTERISTICS X (mm): 3.000 - 20.000 Y (mm): 1.200 / 1.500 Z (mm): 2.000 - 5.000 RPM : 0 - 4.000 Tape Shank: ISO 50 Feeds(m/min): 35 KW (m/min): 30 REFERENCES VESTAS GENERAL ELECTRIC GAMESA ACCIONA SIEMENS wind energy catalogue 11
  • DANOBAT, S. COOP Arriaga Kalea, 21 - 20870 ELGOIBAR (Gipuzkoa) Tfno. +34 943 748 044 Fax +34 943 743 138 danobat@danobat.com www.danobat.com APPLICATIONS GEARBOX COMPONENTS GENERATOR GRINDING MACHINES AND TURNING CENTERS DANOBAT offers a wide range of high precision grinding machines and turning centers for shafts machining. DANOBAT heavy duty grinding machines offer flexible solutions for components up to 6000 mm length and 7 Tn, incorporating different configurations in the wheelhead and in/post process measuring unit. DANOBAT has a wide range of turning centers for the machining of gearbox and generator shafts. Machine configuration may be adjusted according to each customer particular requirements due to the modular design concept, which provides the most cost effective machine solution. TECHNICAL CHARACTERISTICS HIGHLIGHTS: GRINDING MACHINES: . Different grinding operations in just one clamping . Swivelling "B"-axis up to 3 wheels . Hydrostatic wheelheads . DANOBAT MDM-Absolut measuring system HIGHLIGHTS: TURNING CENTERS: . Different operations in a single machine . “C” axis . Driven tools . High chip volume removal . Ground & hardened steel guide ways . Ultraprecision headstock bearings REFERENCES ALSTOM SIEMENS ENERCON SUZLON GAMESA VESTAS GENERAL ELECTRIC wind energy catalogue 12
  • DANOBAT, S. COOP Arriaga Kalea, 21 - 20870 ELGOIBAR (Gipuzkoa) Tfno. +34 943 748 044 Fax +34 943 743 138 danobat@danobat.com www.danobat.com APPLICATIONS GEARBOX COMPONENTS PITCH & YAW VERTICAL GRINDING AND TURNING MACHINES DANOBAT heavy duty vertical grinding and turning machines for the machining of all type wind turbine gears, including hard turning, measuring and different OD/ID grinding and turning operations. DANOBAT - OVERBECK provides internal and radii grinding machines for pitch & yaw systems, and small and medium gearboxes grinding operations. These machines are equipped with the latest technology such as natural granite bed, linear motors, swivelling “B” axes, etc. TECHNICAL CHARACTERISTICS REFERENCES ALSTOM SIEMENS ENERCON SUZLON GAMESA VESTAS GENERAL ELECTRIC wind energy catalogue 13
  • DANOBAT, S. COOP Arriaga Kalea, 21 - 20870 ELGOIBAR (Gipuzkoa) Tfno. +34 943 748 044 Fax +34 943 743 138 danobat@danobat.com www.danobat.com APPLICATIONS BEARINGS FLANGES SAWING MACHINES, VERTICAL TURNING CENTERS AND GRINDING MACHINES DANOBAT provides high production horizontal sawing machines to start the process of manufacturing of rings. Two different solutions are provided: Wagon system, to support very heavy components Gantry type sawing machine with portable sawhead DANOBAT offers multi-purpose vertical turning centers and grinding machines for the machining of bearings and flanges, up to 6000 mm diameter. TECHNICAL CHARACTERISTICS HIGHLIGHTS: SAWING MACHINES: . Capacity up to 3000 mm . Machines prepared to work with bimetal & carbide blades . Intelligent cutting software "paso a paso" . Cutting deflection control . Automatic break in process HIGHLIGHTS: TURNING CENTERS AND GRINDING MACHINES: . Second Ram is available for simultaneous machining and maximum metal removal . Wide range of accessories to meet customer’s requirements . Fixed or elevating crossrail . Live spindle or static tooling models . Automatic tool setting units . In-process work gauging . Tool force monitoring and tool breakage detection systems REFERENCES ALSTOM SIEMENS ENERCON SUZLON GAMESA VESTAS GENERAL ELECTRIC wind energy catalogue 14
  • DANOBAT, S. COOP Arriaga Kalea, 21 - 20870 ELGOIBAR (Gipuzkoa) Tfno. +34 943 748 044 Fax +34 943 743 138 danobat@danobat.com www.danobat.com APPLICATIONS BLADES FULLY AUTOMATED MANUFACTURING PROCESS OF WIND TURBINE BLADES DANOBAT offers technologically advanced machinery, working in consonance with its customers to boost their competitiveness. Automated stages: Glass lay-up Glue & Gel-coat application Edge trimming & surface grinding Measuring & inspection DANOBAT introduces autocontrol procedures in each step in order to achieve high fabrication process reliability. TECHNICAL CHARACTERISTICS HIGHLIGHTS: Lead-time reduction: >55% Human labour reduction: >60% Material consumption reduction: >10% Blade repeatability & quality improvement: >60% REFERENCES ALSTOM SIEMENS ENERCON SUZLON GAMESA VESTAS GENERAL ELECTRIC wind energy catalogue 15
  • SORALUCE, S.COOP. Osintxu Auzoa - Apdo.: 90 - 20570 BERGARA (Gipuzkoa) Tfno. +34 - 943 765 128 - Fax +34 - 943 769 076 soraluce@soraluce.com www.danobatgroup.com APPLICATIONS HUBS BORING MILL CENTRES Multi-purpose boring mill centres offering a full machining and verification process of hubs, including simulation, milling, boring, drilling, tapping and measuring operations. Highlights: . Top quality heads, which are robust, flexible and reliable. . Development of new heads to suit special manufacturing requirements. . Automatic head changing systems for unattended machining processes. . Rigid high powered machines for heavy stock removal. . Thermal stability and dynamic adjustment of the machine. . Wide range of accessories to ensure the machine is exactly matched to the customer’s requirements. . Complete machining of a hub in only 2 set-ups. TECHNICAL CHARACTERISTICS Longitudinal travel (mm): 4.000 - 30.000 Vertical Travel (mm): 2.100 - 6.500 Cross Travel (mm): 1.300 - 1.900 spindle motor power (kW): 37 - 46 - 60 Automatic head changing: Automatic / Orthogonal / Horizontal / Special ATC (no.): 40 / 60 / 80 / 100 / 120 REFERENCES ALSTOM GENERAL ELECTRIC VESTAS ENERCON SIEMENS GAMESA SUZLON wind energy catalogue 16
  • SORALUCE, S.COOP. Osintxu Auzoa - Apdo.: 90 - 20570 BERGARA (Gipuzkoa) Tfno. +34 - 943 765 128 - Fax +34 - 943 769 076 soraluce@soraluce.com www.danobatgroup.com APPLICATIONS FRAMES FLOOR TYPE BORING MILL CENTRES Floor type boring mill centres meeting the continuing demand of wind power market for higher reliability, greater efficiency and increased manufacturing output. TECHNICAL CHARACTERISTICS . Adaptative control to improve the cutting conditions. . Anti-collision system to protect the machine and the component. . Wide range of integrated rotary-travelling tables for different loads and dimensions. . Operator’s platforms with vertical and cross movement to allow the operator to gain grater access to the workspiece. . Turn-key projects: clamping fixtures, cutting tools, CAD-CAM processing, simulation, training, production launch support always at your disposal. Orthogonal head Fixed horizontal head Special head designed as 1ºx1º(1ºx0,001º)/37- 46 kW 37 - 46 - 60 kW per customer's requeriments 4.000 (6.000) rpm 3.000 (4.000,5.000,6.000)rpm Main operations carried out in the frame: . Machining of tower point face. . Machining of the jaw bores. . Machining of the generator fitting face. REFERENCES ALSTOM GENERAL ELECTRIC VESTAS ENERCON SIEMENS GAMESA SUZLON wind energy catalogue 17
  • ETXE-TAR, S.A. Post 62 – San Antolin 3 - 20870 – Elgoibar (Guipúzcoa) Spain Tel. +34 943 740 600 Fax +34 943 743 472 etxetar@etxe-tar.com www.etxe-tar.com APPLICATIONS HUBS FRAMES HORIZONTAL MOBILE COLUMN MACHINE HMC-4 Mobile Column Milling Machine The high performance Floor type Mobile Column Machine, is fully flexible for several families of Heavy-duty Wind power Components (Hub, Frame, Bearing housing, …). The machine allows the integration of fixed or rotary tables, Heavy tools rack, interchangeable Heads, …. One of the main characteristics of the design, is the big rigidity of the whole horizontal head in order to obtain a big power transmission capacity in order to minimize the machining times. ETXE-TAR, as specialized company on Turnkey installation deliveries, supplies both the Machine and the Engineering, study, design and manufacture of the parts clamping fixtures, necessary tools, part program, adjusted systems for parts manipulation, etc. TECHNICAL CHARACTERISTICS Longitudinal stroke (mm): 4.000 (extensible + N x 1.000) Vertical stroke (mm): 2000 to 5.500 Feed rates (mm/mm): 15.000 Spindle Power (kW): 60 / 85 Indexing Table : 360.000 Table capacity (kg): 45.000 Automatic tool changer: 30 to 60 Max. Tool diameter (mm): 240 Specific Customers demand upon request including the Turnkey delivery referring to a specific type of part or Families of parts. REFERENCES Main manufacturers of wind mill components and heavy-duty industry (Albicein, Suzlon, Mingyang, ….). wind energy catalogue 18
  • FAGOR ARRASATE S.COOP. San Andres, 20. 20500 MONDRAGON (Guipúzcoa) Tfno. +34 943 719 999 Fax +34 943 799 677 fagorarrasate@fagorarrasate.com www.fagorarrasate.com APPLICATIONS GENERATORS AUTOMATIC BLANKING LINE Automatic Blanking Line for Electric Lamination production Rotors, Stators and Segments fabrication. TECHNICAL CHARACTERISTICS Coil Feeding Line up to 1200 mm. wide Blanking Press 600 Tn. Special Blanking or Progressive Die Automatic Stacking system of produced parts. Blanking or Progressive Die for lamination Rotor, Stator or Segments fabrication. REFERENCES INDAR WINDPOWER UNITDRIVE wind energy catalogue 19
  • GAMOR, S.L. TALLERES Industrialde Asteasu Sector 2, Pab. 181 - D. 20159 Asteasu (Gipuzkoa) Tfno. +34 943 691 099 Fax +34 943 691 539 gamor@gamor.es www.gamor.es APPLICATIONS OTHER APPLICATIONS TAPPING MACHINE MTC M2-M48 CNC Horizontal Lathe equipped with motorized turret and C axis for complete machining of the wind-rotor main spindle. TECHNICAL CHARACTERISTICS MODEL CAPACITY SPEED TAPING CAPACITY MAX HEAD POSITION MTC M2-M39 30-890 RPM M39 IN MATERIALS WITH 37 HRC ALL MTC M2-M39 22-630 RPM M39 IN MATERIALS WITH 46 HRC ALL MTC M2-M48 15-590 RPM M48 IN MATERIALS WITH 49 HRC ALL VITORIA M3-M130 11-450 RPM M130 IN MATERIALS WITH 40 HRC VERTICAL REFERENCES SIEMENS M. TORRES GRUPO GAMESA GENERAL ELECTRIC wind energy catalogue 20
  • MAQUINARIA GEKA S.A. Pol. Zerradi, 1 - 20180 Oiartzun. (Gipuzkoa) tel. (+34) 943 490 034 fax (+34) 943 491 237 info@geka.es www.geka.es APPLICATIONS FRAMES OTHER APPLICATIONS GEKA HYDRACROP GEKA’s ironworkers are universal punching and shearing machines used for metal construction purposes. These conventional machines have 5 work stations: punching (flats and profiles), cutting angles, round and square bar cropping, cutting flats and notching. GEKA’s range of products is composed of more than 25 different models from 36 Tn up to 220 Tn offering a wide range of special equipments and accessories. TECHNICAL CHARACTERISTICS Hydracrop-55 Hydracrop-80 Hydracrop-110 Hydracrop-165 Hydracrop-220 PUNCHING Power (Tn) 55 80 110 165 220 Max. Ø(mm) Ø40x10 Ø40x14 Ø40x20 Ø40x30 Max. thickness(mm) Ø20x20 Ø24x24 Ø28x28 Ø34x34 Ø40x40 CUTTING ANGLES L at 90º (mm) 120x120x10 130x130x13 152x152x13 205x205x18 205x205x18 L at 45º (mm) 70x70x7 70x70x7 70x70x7 70x70x7 70x70x7 BAR CROPPING Ø and (mm) 40 45 50 60 60 CUTTING FLATS Max. length (mm) 300x15 450x15 600x15 750x20 750x20 Max. thickness (mm) 200x20 300x20 400x20 400x30 400x30 NOTCHING Width x Depth x Th. (mm) 42x90x10 52x90x12 52x90x13 58x110x16 58x110x16 REFERENCES EQUIPAMIENTOS EOLICOS S.L. ENERGIA EOLICA Y SOLAR ESPAÑOLA S.A. wind energy catalogue 21
  • MAQUINARIA GEKA S.A. Pol. Zerradi, 1 - 20180 Oiartzun. (Gipuzkoa) tel. (+34) 943 490 034 fax (+34) 943 491 237 info@geka.es www.geka.es APPLICATIONS FRAMES OTHER APPLICATIONS GEKA ALPS Geka ALPS is an automatic CNC line for punching, marking and shearing angle profiles up to 160x160x16 mm specifically designed for towers manufacturers. Additionally, it can also punch, mark and shear plates and U channels. TECHNICAL CHARACTERISTICS GEKA CNC angle lines C2PL 65 C2PL 80 SPS 150 ALPS 150 ALPS 160 Minimum angle size (mm) 40x40x4 40x40x4 35x35x4 35x35x4 35x35x4 Maximum angle size (mm) 65x65x7 80x80x8 150x150x15 150x150x15 160x160x16 Number of punches 2 (1 per leg) 2 (1 per leg) 2 (1 per leg) 6 (3 per leg) 6 (3 per leg) Maximum diameter (mm) 18 25 31 31 31 Punching force (kN) 170 340 600 730 730 Marking - - disc type cassette type cassette type Characters - - 40 5x10 5x10 Min. flat size (mm) - - - 40x5 40x5 Max. flat size (mm) - - - 150x15 160x16 Capable of procesing U profiles - - - v v Shearing force (kN) 350 650 1.900 1.900 2.500 REFERENCES EQUIPAMIENTOS EOLICOS S.L. ENERGIA EOLICA Y SOLAR ESPAÑOLA S.A. wind energy catalogue 22
  • MAQUINARIA GEKA S.A. Pol. Zerradi, 1 - 20180 Oiartzun. (Gipuzkoa) tel. (+34) 943 490 034 fax (+34) 943 491 237 info@geka.es www.geka.es APPLICATIONS FRAMES OTHER APPLICATIONS GEKA ALFA Geka ALFA range is composed of different CNC lines for marking, punching and shearing flats and angles, specifically designed for metallic constructors and steel works. TECHNICAL CHARACTERISTICS GEKA CNC flat bar lines ALFA 150 ALFA 500 ALFA 500/150 ALFA 500/165T ALFA 500/220T Minimum flat bar (mm) 25x4 40x4 40x4 100x10 100x10 Maximum flat bar (mm) 150x10 500x20 500x20 500x30 500x40 Horizontal punches 2 3 3 up to 3 up to 3 Maximum diameter (mm) 31 31 31 40 40 Punching force (kN) 640 1100 1100 1650 2200 Marking - disc type disc type disc type disc type Number of Characters - 40 40 40 40 Vertical punches - - 1 - - Maximum diameter (mm) - - 31 - - Vertical punching force (kN) - - 600 - - Minimum angle size (mm) - - 40x40x4 - - Maximum angle size (mm) - - 150x150x15 - - REFERENCES EQUIPAMIENTOS EOLICOS S.L. ENERGIA EOLICA Y SOLAR ESPAÑOLA S.A. wind energy catalogue 23
  • GH ELECTROTERMIA S.A. Vereda Real s/n San Antonio de Benagéber – 46184 VALENCIA Tfno. +34 961 352 020 Fax +34 961 352 171 ghgroup@ghe.es www.ghe.es APPLICATIONS GEARBOX COMPONENTS BEARINGS LARGE BEARING HEAT TREATMENT - GTH SERIES These types of installations, GTH series, are composed of a versatile machine used for induction hardening. GTH Series machines treat all type of bearings and gears in a wind turbine (rings with any combination of inner or outer raceways or teeth). TECHNICAL CHARACTERISTICS Production flexibility: installation used for hardening raceways and/or gears (inner or outer) Capability of hardening two teeth at the same time reducing cycle time Automatic accurate positioning of the inductor Automatic control of the gap between part and inductor during the treatment Quick replacement of inductor reference to change the type of production Energy efficiency by using Transithermic® serie generator of 150KW as power supply Lightweight mobile inductor head design Option: Double rotating table for reducing the ring loading time in the machine Option: Pre-heating for deepth hardening profiles in raceways Dimensions depend of the final customer solution REFERENCES ROTEISA (Spain) (Rothe Erde Group - Thyssen) Grupo SKF Euskalforging (Spain) IRAUNDI (Spain) CASCADE (USA) wind energy catalogue 24
  • GH ELECTROTERMIA S.A. Vereda Real s/n San Antonio de Benagéber – 46184 VALENCIA Tfno. +34 961 352 020 Fax +34 961 352 171 ghgroup@ghe.es www.ghe.es APPLICATIONS GEARBOX COMPONENTS BEARINGS RACEWAYS/TRACKS HARDENING INSTALLATION - GTV This type of installation is specialized in hardening of raceways/tracks in large rings and bearings. However it is able to treat gears to give more flexibility for the production. GTV treats inner or outer raceways with different configurations. TECHNICAL CHARACTERISTICS Production flexibility: installation used mainly for hardening raceways (inner or outer) Automatic adjustment of the inductor to the diameter part Automatic measurement of the part avoiding hardening mistakes due to mechanical tolerances in the part Energy efficiency by using Transithermic® serie generator of 150 Kw as power supply Lightweight mobile inductor head design Option: Pre-heating for deepth hardening profiles in raceways Option: Hardening of gears (inner or outer) REFERENCES ROTEISA (Spain) (Rothe Erde Group - Thyssen) Grupo SKF Euskalforging (Spain) IRAUNDI (Spain) CASCADE (USA) wind energy catalogue 25
  • GORATU MÁQUINAS HERRAMIENTA, S.A. LERÚN, 1 • APDO. / P.O. BOX 39 E-20870 ELGOIBAR (Gipuzkoa) tel. (+34) 943 74 82 62 fax (+34) 943 74 43 23 / 093 sales@goratu.com www.goratu.com APPLICATIONS GEARBOX COMPONENTS GÉMINIS HORIZONTAL LATHE, MOD. GHT 11 G4 – 2400 CNC Horizontal Lathe equipped with motorized turret and C axis for complete machining of the wind-rotor main spindle. TECHNICAL CHARACTERISTICS Swing over bed (mm): 2.500 Swing over cross slide (mm): 2.050 Spindle diameter on front bearing (mm): 320 Speed (ranges) (min-1): 0 - 550 (4) Main motor (kW): 113 Max. Torque (Nm): 54.000 Cross slide travel (mm): 1.130 Quill diameter (mm): 320 Bed width (mm): 2.000 Weight between centres (kg): 25.000 REFERENCES TALLERES ALMERÍA (Spain). TALLERES MITXELENA (Spain). ELECON (India). PMT (India). SIDENOR (Spain). MECANIZADOS TAR (Spain). wind energy catalogue 26
  • TORNOS GURUTZPE S.A. Polígono Ind. Itziar Parcela Q8 20829 Itziar (Deba) Guipúzcoa Tel. +34 943 19 90 40 - fax +34 943 19 92 25 gurutzpe@gurutzpe.com - www.gurutzpe.com APPLICATIONS GEARBOX COMPONENTS LATHE G-WIND-MODEL The G-WIND model offers maximum versatility for machining long length, big dimension and heavy weight wind-mill shafts. TECHNICAL CHARACTERISTICS The G-WIND model has been specially designed for the machining serialized pieces aimed at the wind sector. The great rigidity associated with the Gurutzpe lathes allows the combination of big roughs with extremely accurate finishing process. Apart from the typical machining operations, this model also enables drilling, threading and milling operations as it can be equipped with live tools and headstock positioning with big accuracy (C” axis). And furthermore with the aim of providing the customer with the highest quality level in the machined pieces delivery, the G- WIND model features probes for piece measurement and probes for tool wear measurement. 8/12 position motorised Big capacity fixed Probe for tool Probe for piece disk type turret. steady rest wear measurement measurement SWING OVER CARRIAGE: 1.100 mm to 2.000 mm. ALLOWABLE WEIGHT WITHOUT STEADIES: 10 to 30 Tons. DIAMETER OF THE TAILTOCK´S QUILL: 220 to 320 mm HEADSTOCK POWER: 39 to 113 KW MAXIMUM DISTANCE BETWEEN CENTERS:8.000 mm REFERENCES SKET VERSEILMASCHINENBAU GMBH. TALLERES ALMERÍA, S.A. MECACE, S.A. INMAPA, S.L. TALLERES MARTÍNEZ,S.A. wind energy catalogue 27
  • IBARMIA INNOVATEK P.I. Etxesaga, s/n - Apdo.: 35. 20720 AZKOITIA (Gipuzkoa) Tfno. +34 943 857 000 Fax +34 943 857 005 ibarmia@ibarmia.com www.ibarmia.com APPLICATIONS BEARINGS MACHINING CENTRE SVK 50/D2200 Equipped with 1 automatic vertical/horizontal head, suitable for machining large bearings Option: Customized clamping device TECHNICAL CHARACTERISTICS Y stroke according to the range of diameter of the part Z stroke (mm): 800 Maximal diameter suitable for up to 3 m (over 3 m see the model FVK with 2 heads) Power main spindle (kW): 30 Torque main spindle (Nm): 373 Maxi speed (r.p.m): 4.000 Diameter of rotary plate according to the maximal diameter of the part REFERENCES Several main producers of large bearings supplying wind mill manufacturers (Vestas, Gamesa, Suzlon, General electric …) wind energy catalogue 28
  • IBARMIA INNOVATEK P.I. Etxesaga, s/n - Apdo.: 35. 20720 AZKOITIA (Gipuzkoa) Tfno. +34 943 857 000 Fax +34 943 857 005 ibarmia@ibarmia.com www.ibarmia.com APPLICATIONS BEARINGS MACHINING CENTRE FVK 50D/4000 Equipped with 1 automatic vertical head & 1 automatic vertical/horizontal head, suitable for machining large bearings Options: 2 vertical/horizontal heads 2 vertical heads Customized clamping device TECHNICAL CHARACTERISTICS Y stroke according to the range of diameter of the pieces Z stroke (mm): 800 Maximal diameter of the part suitable for up to 6 m Power main spindle (kW): 30 Torque main spindle (Nm): 373 Maxi speed (r.p.m): 4.000 Diameter of rotary plate according to the maximal diameter of the part REFERENCES Several main producers of large bearings supplying wind mill manufacturers (Vestas, Gamesa, Suzlon, General electric …) wind energy catalogue 29
  • IBARMIA INNOVATEK P.I. Etxesaga, s/n - Apdo.: 35. 20720 AZKOITIA (Gipuzkoa) Tfno. +34 943 857 000 Fax +34 943 857 005 ibarmia@ibarmia.com www.ibarmia.com APPLICATIONS FLANGES MACHINING CENTRE PDV 50/5000 Equipped with 2 vertical heads suitable for machining large flanges Options: +/- 3º automatic inclination Self-centring clamping TECHNICAL CHARACTERISTICS Y stroke according to the range of diameter of the part Z stroke (mm): 600 Maximal diameter suitable for up to 8 m Power main spindle (kW): 30 Torque main spindle (Nm): 250 Maxi speed (r.p.m): 5.000 Diameter of rotary plate according to the maximal diameter of the part REFERENCES Several main producers of large bearings supplying wind mill manufacturers (Vestas, Gamesa, Suzlon, General electric …) wind energy catalogue 30
  • JUARISTI TS COMERCIAL S.L. Polígono Basarte Nº 2 20720 AZKOITIA (Gipuzkoa) Tfno. 943 851221 Fax 943 851355 tsco@juaristi.com www.juaristi.com APPLICATIONS HUBS FRAMES PLANER TYPE BORING-MILLING MACHINE TS3-TS5 Boring-Milling centre with very strong cast iron structure, central headstock and box guides. The guideways combine low-friction material SKC with roller shoes to ensure good vibration dampening as well as very accurate positioning. Vertical guideways with box guides at the front + linear guides at the rear (4 guides). Table rotation with preloaded double pinion backlash free system. Hydrostatic system for 20 and 30 ton table. Pallet stations can be added to save machine downtime during workpiece preparation and fixing. TECHNICAL CHARACTERISTICS Travels: X = 2.000 - 6.000 Y = 1.600 - 3.500 Z = 1.000 - 2.500 W = 800 - 1.000 Boring Spindle: 130 - 150 - 180 mm 3.000 - 2.500 rpm 37 - 51 kW. Rotary table: 360.000 positions 12 - 20 - 30 tons 1.600x1.600 - 2.000x2.500 - 3.000x3.000 mm. REFERENCES TS3 & TS5 machines are used in companies subcontracted by following windmill manufacturers: VESTAS GAMESA GENERAL ELECTRIC SUZLON ECOTECNIA wind energy catalogue 31
  • JUARISTI TS COMERCIAL S.L. Polígono Basarte Nº 2 20720 AZKOITIA (Gipuzkoa) Tfno. 943 851221 Fax 943 851355 tsco@juaristi.com www.juaristi.com APPLICATIONS HUBS FRAMES FLOOR TYPE BORING-MILLING MACHINES JUARISTI presents the MX floor type boring-milling machine with very robust thermosymmetric structure and equipped with a great variety of heads with the very last technology. MP machines fully hydrostatic with massive column and RAM are the ideal solution for machining components up to 6.000 mm high. Main motor power up to 100 kW and RAM + spindle 2.600 mm extension provides maximum cutting capacity and accuracy. Extraordinary flexibility is achieved thanks to the Automatic Tool Changer (120 tools), Automatic Head Changer (pick-up station for up to 6 heads) and rotary table with up to 125.000 kg capacity, allowing the centering, milling, drilling, boring, tapping, facing, etc on 5 sides of big components in just one set-up. Reliability and robustness are some of the main aspects of this machine, being all structural components made of nodular and alloyed cast iron. The high accuracy is guaranteed by means of the dynamic RAM compensation system and the optimal guiding system. TECHNICAL CHARACTERISTICS Longitudinal travel: X=4000-30000 Vertical travel: Y=2000-6000 RAM cross travel: Z=1000-1650 Boring bar travel: W=800-1000-1200 Boring bar diameter: 150-180-205 Rotary table: 5000x6000 20-30-50-70-100-125 ton ATC 30-120 tools Automatic heads Facing heads AAC magazine: up to 6 attachments REFERENCES TS3 & TS5 machines are used in companies subcontracted by following windmill manufacturers: VESTAS GAMESA GENERAL ELECTRIC SUZLON ECOTECNIA wind energy catalogue 32
  • KAISER SISTEMAS DE EQUILIBRADO, S.L. Avda. Cristalería, Nave 20, Polígono Industrial 43720 L´ARBOÇ (Tarragona) Tfno. +34 977 167 512 Fax +34 977 167 581 kaiser@kaisersistemas.com www.kaisersistemas.com APPLICATIONS BALANCING OF ROTATING PARTS VERTICAL BALANCING MACHINE KV300 Ver tical balancing machine for parts like brake discs, couplings and other parts. TECHNICAL CHARACTERISTICS Rotor weight up to 450 Kg. Rotor diameter up to 1.200 mm. REFERENCES GAMESA MEKATAR wind energy catalogue 33
  • LANBI, S.A. Ctra. SS-BI, Km. 53 - Apdo. 63 - 20850 ELGOIBAR (Gipuzkoa) Tfno. +34 - 943 755 000 Fax +34 - 943 755 162 lanbi@lanbi.com www.lanbi.com APPLICATIONS FLANGES MACHINING MACHINE FOR EOLIC FLANGES Machining machine for drilling eolic flanges with a CNC gantry in axes X, Y and Z. TECHNICAL CHARACTERISTICS Autocentering clamping system, with automatic regulation in order to absorb all the eolic flanges references. Universal system without any change. 2 Vertical drilling units. 2 Servocontrolled Z slides. 2 Servocontrolled Y slides. 2 Servocontrolled X slides, master-slave. Automatic chip conveyor. REFERENCES GAMESA EOLICA wind energy catalogue 34
  • ANAYAK Polígono Industrial de Itziar, 20829 ITZIAR-DEBA (Gipuzkoa) Tel. +34 943 606 011 Fax +34 943 606 150 correaanayak@correaanayak.es www.correaanayak.es APPLICATIONS HUBS FRAMES OTHER APPLICATIONS FLOOR TYPE MILLING MACHINE HVM-MG The HVM-MG floor-type milling machine with rotary table has been designed for machining medium and large-sized parts up to 20,000mm in length. The large-diameter rotary table with longitudinal travel W permits broaching, which contributes to making this machine really universal. Moreover, its T-shaped configuration allows it to have cross travels of up to 2000mm, which combines with an oversized bed incorporating four wide linear guides to provide this machine with maximum rigidity and accuracy. TECHNICAL CHARACTERISTICS Speed (r.p.m.): 4.000 - 24.000 Main Motor Power (Kw.): 22 / 45 Rotary table (mm): 2.600 x 1.600 / 3000 x 3.000 Travels (mm): 2.000 - 20.000 / 1.200 - 2.000 / 1.500 - 3.400 Rapid Feed (m/min): 20 Max. load on table (kg/m2): 30.000 - 60.000 Taper: ISO 50 REFERENCES TALLERES ALLUS PATTEL INMAPA LK AREVA NEUENHAUSER wind energy catalogue 35
  • CORREA Alcalde Martín Cobos, s/n, 09007 BURGOS (Spain) Tel. +34 947 28 81 00 Fax +34 947 28 81 17 correaanayak@correaanayak.es www.correaanayak.es APPLICATIONS HUBS FRAMES OTHER APPLICATIONS FLOOR-TYPE MILLING MACHINE SUPRA - Floor type for heavy pieces with tight tolerances - Medium size pieces machining. - 5-sides machining mechanical & detachable heads. - Interchangeable mechanical heads and special heads and attachments (UAD 0,02º x 0,02º / 6000 rpm). - Linear ways on the linear axes for high performance. - Automatic Tool Change (ATC). - Rotary table - Angle plates - Work-piece measurement and tool probes - Coolant through the spindle (17-38 bar). TECHNICAL CHARACTERISTICS Speed (r.p.m.): 6.000 - 18.000 Main Motor Power (Kw.): 30 - 46 Travels (mm): 2.000 + 24.000 / 1.200 - 2.000 / 1.500 - 6.000 Rapid Feed (m/min): 20 - 30 Taper: ISO 50 REFERENCES TALLERES ALLUS INMAPA AREVA PATTEL LK NEUENHAUSER wind energy catalogue 36
  • ANAYAK Polígono Industrial de Itziar, 20829 ITZIAR-DEBA (Gipuzkoa) Tel. +34 943 606 011 Fax +34 943 606 150 correaanayak@correaanayak.es www.correaanayak.es APPLICATIONS HUBS FRAMES OTHER APPLICATIONS BED-TYPE MILLING MACHINE VH-PLUS-MG The new VH-PLUS-MG bed-type milling machine with rototranslating table permits machining medium-sized parts in one clamping thanks to its rotary tables of different sizes. Moreover, its T-shaped configuration allows it to have cross travels of up to 2500mm, which makes this machine versatile and multi-purpose. TECHNICAL CHARACTERISTICS Speed (r.p.m.): 3.000 - 4.000 Main Motor Power (Kw.): 46 Travels (mm): 2.000 - 4.000 / 1.500 - 2.500 / 1.500 - 2.500 Rotary table (mm): 1.250 x 1.600 / 1.600 x 2.000 / 2.000 x 2.500 Torque (N/m): 7.000 - 24.000 Rapid Feed (m/min): 20, 10 (W) Max. load on table (kg/m2): 8.000 - 18.000 Taper: ISO 50 REFERENCES TALLERES ALLUS INMAPA AREVA PATTEL LK NEUENHAUSER wind energy catalogue 37
  • TECNOSPIRO S.A. - ROSCAMAT Pol. Ind. Pla dels Vinyats, nau nº 2. 08250 Sant Joan de Vilatorrada (Barcelona) Tfno. +34 938764359 / 93 8764242 Fax +34 938764044 comercial@tecnospiro.com www.tecnospiro.com APPLICATIONS OTHER APPLICATIONS ROSCAMAT 200 / ROSCAMAT 200 C13 The machine itself consist of a radial arm joint to a pendular arm balanced by jeans of a pneumatic damper. The pendular arm fixes the headmember and the pneumatic motor, both of them, moving perpendicularly to the working area. Thanks to the combination of all its elements, the machine describes a toroidal movement to the working area. The tapholders are fixed to the motor by means of a quick change, and taps fixes directly to the tapholders. With this simple method, we reduce the time of change of tooling with the consequent save of time, and increase of the productivity in all threading operations. TECHNICAL CHARACTERISTICS The ROSCAMAT 200 can be supplied with two motors, each one with a different speed but the same power of 500 W. MAX. SPEED MAX. TORQUE MAX. THREAD. MAX. THREAD. MOTOR (rpm) (Nm) COUPLING Ø ALUMINIUM STEEL <100Kg. 202A0100 350 36 19 M16 M14 202B0200 750 17 19 M12 M10 WORKING AREA: (R-200) (R-200 C13) Radius: 935 mm Radius: 1020 mm High: 530 + 130 mm High: 530 + 130 mm TAPPING OF HIGH PIECES: For working in high positions, R-200 C-13 hold the base casing, pull it up and turn it 90º to fix it. The machine will be 130 mm. higher. Now, it is ready to work. wind energy catalogue 38
  • ZAYER, S.A. Portal de Bergara, 7 - 01013 VITORIA-GASTEIZ (Alava) Tfno. +34 945 262800 Fax +34 945 286647 zayer@zayer.es www.zayer.com APPLICATIONS FRAMES HUBS OTHER APPLICATIONS MOVING COLUMN MILLING CENTRE, 30KCU-AR MODEL This type of machine allows to integrate fixed and rotary tables. The easy adaptation for the machining of big size parts together with the possibility to fit different type of heads, as well as the automatic change of heads, makes this machine. very suitable for the machining of specific parts for the wind power industry. Type of heads that can be equipped in the machine: quill, direct outlet head, “L” shaped head, and specially suitable for this sector is the 45º automatic head, due to its capacity to work on inclined planes. TECHNICAL CHARACTERISTICS Longitudinal travel (mm): 3.000 - 15.000 Cross travel (mm): 1.250 - 1.600* Vertical travel (mm): 2.000 - 2.500*-3.000*-3.500*-4.000* Rapid feed (mm/min): 20.000 Head: 45º automatic.(others on request) ATC: 30 - 40* - 60* - 80* Main motor power (kW): 40 *optional REFERENCES FELGUERA C.M. TALLERES MARTINEZ MECAWIND TALLERES MITXELENA MERCIER WEC wind energy catalogue 39
  • ZAYER, S.A. Portal de Bergara, 7 - 01013 VITORIA-GASTEIZ (Alava) Tfno. +34 945 262800 Fax +34 945 286647 zayer@zayer.es www.zayer.com APPLICATIONS FRAMES OTHER APPLICATIONS BRIDGE TYPE MILLING CENTRE WITH MOVING CROSS BEAM, FMCU-AR MODEL Bridge type machine with moving cross beam equipped with automatic changing of heads with the possibility of fitting heads with automatic positioning 360.000 positions – 0,001º (45º, L shaped, direct outlet, five axis Twist head). The option of two tables for automatic clamping allows pendular work. Its high reliability, accurary and versatility makes it suitable for the machining of large components for the wind energy sector. TECHNICAL CHARACTERISTICS Table surface (mm): 4,000-12,000x2,000-2,500*-3,000*-3,500*-4,000* Distance between columns (mm): 3,300-3,800*-4,300*-4,800* Longitudinal travel (X) (mm): 4,000 – 12,000 Cross travel (Y)(mm): 4,050 – 4,550*-5,050*-5,550* Vertical travel (Z) (mm): 1,250 – 1,500* Rapid feed (mm/min): X=20,000-10,000; Y,Z=25.000 Standard head: Direct outlet (others on request) Magazine (tools): 30 - 40*-60*-80*-100* Main motor power (Kw): 60 Kw. *optional REFERENCES FELGUERA C.M. TALLERES MARTINEZ MECAWIND TALLERES MITXELENA MERCIER WEC wind energy catalogue 40
  • Machine Tool Manufacturers' Association of Spain Parque Tecnológico de San Sebastián Pº Mikeletegi, 59 20009 San Sebastian - SPAIN Tel: 00 34 943 309009 Fax: 00 34 943 309191 e-mail: afm@afm.es www.afm.es