Power Tools & Accessories —~ j I I 90 Thorncliffe Park Drive Phone FaxPERRIN Toronto ON M4HIN5 (416) 422-4600 (416) 422-0290H & W PERRIN E-MAIL Address: Toll Free: 1-800-387-5117 Toll Free: 1-800-741-6139 sales~perrin.on. ca
FORE DOM® Power TooI~~~Rpnlcwpment Shafts & Sheaths~1~~~~~~~ ________________ ________________ OUTER SHEATHS #34.F-77 For motor series CC-DD-MM-R-RB-RM-S-TX-SR #34.F-80 For motor series EE-GG-MMG #34.F-82 For motor series F..JJ-JB #34.F-83 For A series flexaides #34.F-86 For B series flexaides INNER SHAFTS #34.F.-93 For motor series CC..DD-MM-R-RB-RM-S-SR-K-L-PG-TX #34.F-96A For motor series EE-GG-MMG #34.F-97 For motor series F-JJ-JB #34.F-99 For A series flexa ides #34.F-104 For B series flexaides POWER TOOL KITS Contains what you need to begin working... motor, speed control, handpiece, and accessories. Each kit contains one of our most popular combinations plus an accessory kit at a lower cost than if purchased individually.#34.F-2230K1TContains: / Model SR (1/6 HP) motor with a forward and reverse feature.________ / Flex shaft and sheath. / #30, three jaw, ball bearing hand piece (capacity 0 to 4mm) / Chuck key with plastic comfort handle. I Model FCT electronic foot rheostat. / 54 piece accessory kit, compound and a tube of shaft lube. / Rotating bur and tool holder. / Variable speed up to 18,000 RPM / 2 year warranty #34.F-2272K1T / Model SR (1/6 HP) motor with a forward and reverse feature. / Flex shaft and sheath. / #30, three jaw, ball bearing hand piece (capacity 0 to 4mm) / Chuck key with plastic comfort handle. / Model FCT electronic foot rheostat. / 84 piece accessory kit, chuck / Variable speed up to 18,000 RPM / 2 year warranty.
FOREDOM® ~owj~.#34.F-10005 Handpiece and motor oil. ~ —~ ~ V V *4WU) fllh~) ~w#34.F-1 0006 Grease for lubricating flexible shafts. I FORF~DOM~ F~b~e Shag LL~br~c~flt 1• It~ 3 V VV< ~T #34.F-AT-1 Handpiece and accessory tray.#34.F-BL 1/6 hp Bench Lathe (mini polishing motor) ____________________________________A powerful, variable speed bench lathe in acompact size ideal for use at the workbench.Buff, polish, deburr, clean, texture, and grind at thespeed you select without changing wheel diameters.Product Features/ High torque 1/6 horse power, permanent magnet motor in sealed dust proof housings./ Permanent lubricated ball bearings. _____________________________________/ Heavy duty cast iron base with 4 mounting holes./ Variable speed from 500 to 7,000 RPM with solid state dial control./ Supplied with 2 tapered spindles.Dimensions~ Width between spindles tips 1 3” Base 6W x 5”D Height to center of motor shaft 3 3/4”~ Motor shaft diameter 5/16” ~ Weight 3.4 kg. ~ CSA certified #34.F-B051 6 Convert your bench lathe into a flex shaft machine with a 30” long “Flexade” flexable shaft assembly. Coupling fits the 5/1 6” shaft of the bench lathe. NOTE: Handpiece sold separately.#34.F-CK-0 Chuck Key in a Molded Plastic HandleThe comfortable plastic handle makes accessory changeseasier and the key more difficult to misplace. Fits allForedom 3 jaw chuck type hand-pieces. PERRIN 90 Thorncliffe M4H 1N5 Toronto ON Park Drive Phone (416) 422-4600 (416) Fax 422-0290 H & W PERRIN E-MAIL Address: Toll Free: 1-800-387- ToIl Free: 1-800-741-6139 firstname.lastname@example.org 5h17
FOREDOM® Po~t.r T9oIs~~#34.F-G-30 #34.F-HP72 Handpiece Grip Standard key for all size #0 3-jaw handpiece chucks #34.F-FCT-1 This 1/8 thick rubber Foot control in plastic housing. cushion provides an added This solid state control gives layer of comfort to #30 handpiece. smooth control at all speeds. Grip slides on easily but holds firm. Our most popular model. #34. F-SCT- 1 #34.F-TXR Offers the same electronics Foot control in plastic housing. and smooth control as FCT Same as FCT but for use with but in a much heavier, cast TX high torque and iron housing. The added TXH heavy duty motors. weight helps keep the control in place. #34.F-F37200 #34.F-JCA-2 Zinc die cast mini vise Arbor with chuck adjusts -3firmly holds small work to hold accessories with pieces for precision drilling, shanks from 0 to 5/32”. Comes with chuck key. ~ Features vertical & horizontal Fits on 5/1 6” motor shafts. Use on right hand side. grooves in jaws plus slots in base #34.F-JCA-1 Same as above but for 1/4” for bolting to drill press table. diameter motor shafts. #34.F-DP3O Drill Press A rugged and precise stand which converts your Foredom® flexible shaft power tool into a drill press. The sturdy, all metal stand is fully adjustable. It has a 2” throat capacity and a stroke length up to 1 1/4”. The DP3O is designed for use with #30 & 44T hand pieces matched with any foredom flex shaft machine. 90 Thorncliffe Park Drive Phone Fax PERRIN Toronto ON M4H 1N5 (416) 422-4600 (416) 422-0290 H & W PERRIN E-MAIL Address: Toll Free: 1-800-387-5117 ToIl Free: 1-800-741-6139 sales~perrin. on. ca
FOREDOM® Power TooIs~~ #34. F-SJ 35 Soft Jaws #34.F-SJ35L Soft Jaws Soft jaws aftach to any 3” Soft jaws aftach to any 3” to 4” wide vise with to 4” wide vise with magnetic strips. Cushioned magnetic strips. pads are made of resilient Cushioned pads are ethylene vinyl acetate that I made of leather that grip odd shapes and prevent marking. The prevent marking. The magnetic aftachment magnetic aftachment allows the Soft Jaws to be allows the Soft Jaws to be installed or removed installed or removed in seconds. in seconds. ~I~1INI~I #34.F-DCH-1 ~ Dust Collector Hood Hoods are made of heavy gauge sheet metal construction with non skid pads on the boftom. Has 21/21’ adapter that fits most collection system hoses. Sold individually. 61/2” high x 4~/8” wide x 8~/8” deep Ideal for use with the BL bench lathe3M - FX Polishing WheelsFX polishing wheels are made of premium grade silicon carbide mineral with brightness enhancersimbedded in a foam-like resin material. They are used for consistent, controllable finishes andpolishing of all metals. As the wheel is being used, new surface enhancers and mineral arecontinuously exposed, offering unvaried finishes.~ Dimensions 4” x 1” (100 x 25mm)~ Recommended speed range 500 to 2000 RPM~ Available in six different abrasive grades~ Works on platinum, gold, titanium, precious metal clay, silver, brass, chrome-cobalt & steel~ Runs wet or dry. Running wet can produce cooler work pieces and result in faster finishing~ Can be used on most polishers using the tapered spindle adapter #34.F-4568 Number Grit #34.F-FXO2 240 #34.F-FXO3 320 #34.F-FXO6 600 #34.F-FXO8 800 #34.F-FX15 1500 #34.F-FX3O 3000#34.F-4568 Ada pter...Fiis into center of wheel to allow use Mounting on standard tapered spindles.
FOREDOM® ~ #34.F-TX-TXR High Torque Flexible Shaft Machine Model TX motor supplied with flexible shaft and TXR foot rheostat Features: / High torque at all speeds / 1/3 hp ball bearing motor. / Operates at speeds up to 15,000 RPM. / TXR foot rheostat / Accepts all standard handpieces / Replaceable motor brushes / CSA certified The TX is Foredom’s most powerful flex shaft, has permanent magnet DC motors featuring the newest technology. These ball bearing motors have advanced rare earth magnets in place of wound fields. This system delivers more torque at low speed and throughout the entire speed range. It /‘ N #34.F-SR-FCT Flexible Shaft Machine ______________________________________________________ Model SR motor supplied with flexible shaft and FCT foot rheostat Features: / 1/8 hp ball bearing motor. / Operates at speeds up to 18,000 RPM. / Reversible _______________ / FCT foot rheostat Handpiece sold separately / 39” flexible shaft / Replaceable motor brushes / CSA certified Reversible SR model is especially suited for carving symmetrical and other IMaintenance Kits special designs and for keeping wood dust away from the workpiece.Contain a spare flexible shaft to replace worn or broken shafts. One pairof replacement motor brushes, a tube of flexible shaft grease & Instructions.#34.F-MK8 Maintenance KitFor ball bearing models 5, SB, SM, (SR old YeHP version), SRB, SRM#34.F-MK9 Maintenance KitFor ball bearing models CC, DD, MM 1 15V#34.F-MK1 0 New Maintenance Kit For all new 1/6 HP series SR, SRM, SRB motors#34.F-MKJ 6 New Maintenance Kit For the new 1/3 HP series TX, TXM, TXB motors#34.F-HP76 Inner Duplex Spring for HandpiecesInner drive spring for handpieces with a flexible center section.#34.F-HP73 Replacement outer duplex spring for handpieces 8D, 15D, 52D#34.F-HP74 Replacement outer duplex spring for handpieces 7D, 1OD
FORE DOM® Power TooI~~, #34.F-KIT1O #34.F-KIT2O 20 piece accessory kit includes 35 piece accessory kit includes Steel cufters & burs, mounted Steel cufters & burs, mounted points, wire & bristle brushes, points, wire & bristle brushes, rubber abrasives, sanding drums rubber abrasives, sanding & a felt bob. drums & felt bobs. ~ #34.F-WK5O #34.F-HPR15G ~ 12 piece woodcarvers assortment. Diamond tipped Pave point for special texturing . ~ Includes aluminum oxide points, For use in power graver or any collet type plated diamond point, vanadium hammer handpiece. , ~ steel cufter, carving drill, 2 ~ Typhoon® carbide burs, and 2 mandrels -, 3/32” Shaft notthreaded #34.F-CHA-4 #34.F-TM-4Collet holder with 1/4” collet. Mounts on 1/4” Tapered spindle (right hand)motor shafts. Holds accessories with 1/4” for motors with 1/4” shafts.shanks. Supplied withwrench. For use onright side. #34.F-WM-4 #34.F-M8Wheel mandrel for mounting stones, brushes Mandrel for use in handpiece.and other accessories with 1/4” mounting holes Shank size is 1/8”For motors with To hold wheels with 1/4” holes.1/4” shafts.#34.F-MP1 1 7P Motor brushes for models R,RB, EE, GG, MMG, & CC-230V sold in pairs#34.F-MP1 19P Motor brushes for models CC, DD, MM-i iSV#34.F-MP132P Motor brushes for new 1/6 HP models SR, SRB, SRM,#34.F-MP262P Motor brushes for models BL-1, BL, BL-iA, BL-2 1i~~MA.M~#34.F-MP3J9P Motor brushes for models L, PG, TX, TXB, TXM, TXH, TXBH, TXMH#34.F-MP2O1 9P Motor brushes for models 5, SB, SM, (SR old ~/a HP version), SRB, SRM, H, HB, HM, K#34. F- H P442 ColIet 3/32” for 44, 44T, 44TSJ, 44HT, CHA-4, CHA-5#34. F- H P443 Collet 3mm for 44, 44T, 44TSJ, 44HT, CHA-4, CHA-5#34. F- H P447 Collet 1/4” for 44, 44T, 44TSJ, 44HT, CHA-4, CHA-5#34. F-H P600 Collet set of 4 for 8, 8D, 8SJ, 28, 28SJ, CHA-1, CHA-2#34.F-HP6O1 CoIlet 1/32” for 8, 8D, 8SJ, 28, 28SJ, CHA-1, CHA-2#34.F-HP602 CoIlet 1/16” for 8, 8D, 8SJ, 28, 28SJ, CHA-i, CHA-2#34.F-HP603 Collet 3/32” for 8, 8D, 8SJ, 28, 28SJ, CHA-i, CHA-2#34.F-HP604 Collet 1/8” for 8, 8D, 8SJ, 28, 285J, CHA-1, CHA-2#34.F-HP1 03126 CoIlet 4mm for 25, 25H, 35, 35SJ
FOREDOM® Power~T9o1s~~Handpieces _________________________#34.F-8 Collet type chuck with slim design and chuckguard sleeve that protects fingers when working closeand slides back when changing collets & accessories.Comes with 3/32’ & 1/8” collets plus wrenches.#34.F-8D Same as #8 but with a flexible duplex spring.#34.F-1O This handpiece has a rotating lever thatreleases and closes the collet for quick changes. It haspre-lubricated ball bearings that do not requirelubrication. Holds standard 3/32” burs.#34.F-1 OD Same as #10 but with a flexible duplex spring.#34.F-1 5 Hammer handpiece has a reciprocatingrather than a rotary action and is used at low speed byjewellers for sefting and decorative work. It requiresperiodic lubrication. Supplied with 1 anvil point.#34.F-15D Same as #15 but with a flexible duplex spring. ~ Axwt Point Optional Pave Point Optiona’ Carbicio Stylus#34.F-HP1 01 77 Anvil point for hammer handpiece#34.HPR15PT Diamond tipped pave point forspecial texturing. For use on hammer handpiece.#34.F-10212 Carbide stylus for hammer handpiece.#34.F-18 Quick change handpiece with a slim gripand a lever action release. Features pre-Iubricatedbearings and holds standard 3/32” burs.#34.F-1 8D Same as #18 but with a flexible duplex spring.#34.F-30 Most popular hand piece with pre-lubricated0 to 4mm. Comes with key in plastic handle.#34.F-35 Unique handpiece with a ball bearing speedincreaser that produces 2.5 times the speed of the motor.Comes with 1/8” collet.#34.F-44T Collet type handpiece handles accessoriesup to 6.4mm. Comes with 3 collets. (3/32”, 1/8”, 1/4”)Supplied with pin & wrench.#34.F-52 Smooth running ball bearing handpiece withplastic barrel & grip. Features a push/pull quick release.#34.F-52D Same as #52 but with a flexible duplex spring.
FOREDOM® Power~TpoI~~Handpieces continued#34.F-20 Quick release handpieceThis handpiece has a rotating lever that releases andcloses the collet for quick changes. It has pre-lubricatedball bearings that do not require lubrication. Shaped bodyprovide comfortable grip. Holds standard 3/32” burs. Electric Wax Carvers The compact control box has a precision control dial for setting and maintaining temperatures from 95°F (35°C) up to 560°F (294°C). Control box is only 2½” x 2” and all cords are removable for easy storage. The handpiece is lightweight and comfortable with cork insulation to keep fingers cool while working. The detachable handpiece cord is also lightweight and extremely flexible, perfect for the controlled movements needed for fine detailing work.* * * #21 .F-WC-1 Wax carver supplied with 3 tips. h ~ !w (marked with asterisk *) ~ jj 11 #21 .F-WC-3 Wax carver supplied with all 7 tips.~ 90 Thorncliffe Park Drive Phone Fax PERRIN Toronto ON M4H 1N5 (416) 422-4600 (416) 422-0290 H & W PERRIN E-MAIL Address: Toll Free: 1-800-387-5117 Toll Free: 1-800-741-6139 sales(~perrin. oii. ca
FOREDOM® Po~er Tools I F#34.F-AK79721 0 V ~VForedom® Belt Sander AttachmentAll metal quality-machined device aftaches with ease over the top of a Foredom #30 hand piecewith supplied hex key. Sander has 3 permanently lubricated ball bearings. Use to power sand andsmooth metal, wood, acrylic and composite materials. Unit comes with a 180 grit belt installed andis supplied with 3 additional belts each in grits 100 —180 240. Can be used freehand or —mounted into a hand piece holder for more control of the work piece.Measures 4 7/8” long x 1 ¾” wide x 2” high.Uses sanding belts measuring 7 x 257mmReplacement Belts For Foredom® Belt SanderSupplied in packages of 5 belts. Available in 3 grits (100 — 180 — 240)#34.F-A797415 Grit 100#34.F-A797425 Grit 180#34.F-A797435 Grit 240#34.F-MAHH-30Foredom® Hand Piece HolderThis accessory allows you to bring the work piece to the toolinstead of the other way around. Some times being ableto hold the work in both hands gives an extra level of control.Device clamps to any bench or able top up to 21/2” thickand can be telescoped to just the right height. Hand piececan be quickly inserted or removed. Comes with bench clamp, rod and hand piece clamp. For use with all #30 & #44 serieshand pieces.