• Share
  • Email
  • Embed
  • Like
  • Save
  • Private Content
2009 Hausmann Catalog Sec2 p54-80
 

2009 Hausmann Catalog Sec2 p54-80

on

  • 1,415 views

 

Statistics

Views

Total Views
1,415
Views on SlideShare
1,415
Embed Views
0

Actions

Likes
0
Downloads
1
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

    2009 Hausmann Catalog Sec2 p54-80 2009 Hausmann Catalog Sec2 p54-80 Document Transcript

    • EXERCISE EQUIPMENT A. Model B. Model 2626 C. Model 2631 2629 A. Model 2629 C. Model 2631 Common Features Duplex Pulley Weights Triplex Pulley Weights PULLEY WEIGHTS – MODELS 2626, 2629, 2631 SPECIAL FEATURES: SPECIAL FEATURES: • For shoulder, elbow and chest exercises. • For overhead, shoulder, elbow and chest • (2) Handles at chest level and (2) handles at exercise. • Superb rehabilitation and exercise device floor level. • (2) Handles overhead, (2) Handles at chest for both wheelchair and ambulatory level, (2) Handles at floor level. MODEL DEPTH WIDTH HEIGHT patients. • Adapts to ceiling heights of 9ft. to 12ft. • Each wall/ceiling and floor plate is 2629 8½” 30” 63” MODEL DEPTH WIDTH HEIGHT equipped with “smooth action” sets of nylon pulleys. B. Model 2626 2631 8½” 30” 96”-144” • “Ergonomic” foam covered handles for Chest Pulley Weights enhanced patient comfort. SPECIAL FEATURES: • Disc weights can be added in 2 1⁄2 lb. • For chest and upper extremity exercise. increments up to a maximum of (5) 2 1⁄2 • (2) Handles at chest level. lb. disc weights per each side. (Total of (10) 2 1⁄2 lb disc. weights). MODEL DEPTH WIDTH HEIGHT • Weight carriers elevate vertically on 2626 8½” 30” 63” smooth running vertical stainless steel rod guides. D. Model S-950 • Floor plates are equipped with rubber bumper stops for quiet operation. Economy Wall Mounted Overhead Pulley • Floor and wall plates are almond styrene SPECIAL FEATURES: covered wood construction and are pre-drilled to facilitate attachment. • For light duty upper extremity exercise. D. Model S-950 • Shipped ready-to-assemble. Wall • 10" x 8" gray laminate wall-mounting plate. fasteners not included. • Equipped with (2) swivel rollers, nylon rope and two handles. MODEL DEPTH WIDTH HEIGHT S-950 16” 10” 8” 54
    • THERAPY AND REHAB EQUIPMENT A. Model 5564 TheraStand™ Storage and Equipment Module • Oak laminate corner storage cabinet has bi- fold storage doors with lock and (3) shelves. • Almond pegboard on right side with 11 pegboard hooks for Hugger® Weights. • (20) dumbbell hooks on left side of cabinet. MODEL LENGTH DEPTH HEIGHT 5564 35” x 35” 24” 80” Model 5564-100 TheraStand™ Model 5564-300 with Accessories Reverse view MODEL CONSISTS OF 5564-100 (1) 5564 TheraStand™, (1) 5581 Set A. Model 5564 of (16) Hugger® Weights, (2) 5505 Front view Sets of (10) Dumbbells ea., (1) 5539 set of (3) Weight Bars Model 5564-300 TheraStand™ Model 5564-200 TheraStand™ with Equipment and Accessories with Equipment MODEL CONSISTS OF MODEL CONSISTS OF 5564-300 Same as 5564-200 plus: (1) 5581 set 5564-200 (1) 5564 TheraStand™, 1316 Folding of (16) Hugger® Weights, (2) 5505 Parallel Bars, 2629 Duplex Pulleys, sets of (10) Dumbbells each and (1) S-950 Overhead Pulley 5539 set of (3) Weight Bars B. Model 5561-100 C. Model 5594 Model 5594-100 Accessorized Rack Pulley/Mirror Rack Exercise/Rack Station MODEL CONSISTS OF • Built-in #2629 Duplex Pulleys (see page 54). • Built-in #2629 Duplex Pulleys. (See pg. 54) 5594-100 (1) 5594 Rack with accessories as follows: • Full view glass mirror with ANSI safety • Vertical Dispenser for (5) REP Bands.™ (1) 5581 Set of (16) Hugger® Weights, backing. • Storage Bin for (6) “Soft-Ball” Weights. (2) 5505 Sets of (10) Dumbbells ea., • (2) Dumbbell Racks including (20) Dumbbells. • Storage for Weight Bars & (3) Plastic Tubs. (1) 5531 Set of (5) REP Bands™, • Durable black laminate finish on all surfaces. • Pegboard for Hugger® Weights with (11) hooks. (1) 5541 Set of (5) Weight Bars, • Base plate has bumper T-molding and • (20) Dumbbell hooks. (1) 5545 Set of (6) “Soft-Ball” Weights (4) 4” dia. swiveling locking casters. • (4) 4” diameter swiveling locking casters. Weights, dumbbells and other accessories MODEL WIDTH DEPTH HEIGHT MODEL WIDTH DEPTH HEIGHT must be ordered separately 5561-100 24” 28” 73” 5594 32” 37” 74” Model 5594-100 Reverse view Model B. Model 5561-100 5561-100 C. Model 5594 Front view Reverse view Front view 55
    • T H E R A - WA L L ™ S Y S T E M A. Model 8250 B. Model 8251 C. Model 8252 D. Model 8253 A. Model 8250 Cabinet B. Model 8251 Cabinet C. Model 8252 Cabinet SPECIAL FEATURES: SPECIAL FEATURES: SPECIAL FEATURES: • Includes upper dispenser for optional REP • Includes (8) Plastic Storage Tubs (12” x 14” x • Includes Storage Bin for optional Weight Bars Bands™. 4” high) and adjustable laminate shelves. and space for Owner’s canes and crutches. • (2) 10-hook metal wire racks on both interior MODEL WIDTH DEPTH HEIGHT • Almond pegboard back is equipped with sides to hold (20) optional Dumbbells. (11) pegboard safety hooks for misc. items. • Almond-coated pegboard panel on inside 8251 32” 19½” 78” MODEL WIDTH DEPTH HEIGHT back to hold (16) optional Hugger® Weights. Includes (11) pegboard hooks. 8252 32” 19½” 78” MODEL WIDTH DEPTH HEIGHT Common Features Model 8252-100 8250 32” 19½” 78” THERA-WALL™ THERAPY STORAGE SYSTEM Accessorized Cabinet • MIX & MATCH Modular System. MODEL CONSISTS OF Model 8250-100 Order 1, 2, 3, 4 or more Accessorized Cabinet cabinets to fill any wall space. 8252-100 (1) 8252, (1) 5541 Set of (5) • Each oak laminate cabinet module is Weight Bars. MODEL CONSISTS OF 32” wide x 19 1⁄2 ” deep x 78” high 8250-100 (1) 8250, (2) 5505 Sets of (10) and is equipped with (2) Oak laminate D. Model 8253 Cabinet Dumbbells each (1 to 10 lbs), (1) hinged locking doors. SPECIAL FEATURES: 5581 Set of (16) Hugger® Weights, • Modular cabinets must be secured to • (3) Laminate Storage Drawers behind doors. (1) 5531 Set of (5) REP Bands™ the wall and can an be detached and • (3) Laminate adjustable shelves. moved if necessary. Wall fasteners not included. MODEL WIDTH DEPTH HEIGHT 8253 32” 19½” 78” 56
    • THERAPY AND REHAB EQUIPMENT A. Model 6642 B. Model 2515 C. Model 2518 A. Model 6642 B. Model 2515 C. Model 2518 Powder Board Table Shoulder Ladder Shoulder Wheel FEATURES: FEATURES: FEATURES: • White Leather high pressure 11⁄8 ” laminate • Natural lacquered wood product. • Chrome plated shoulder wheel is mounted on top provides low-friction, scratch-resistant • Facilitates increased range of shoulder motion upper and lower wood plates for easy wall surface. as fingers climb up and down (36) vertical attachment. Wall fasteners not included. • Patient cut out and oval shape offer sitting steps. • Handle location adjusts to increase range of patient full range of motion in a horizontal • Pre-drilled holes for wall mounting. motion from 10” to 39” diameter. plane. • Variable resistance control knob. MODEL DEPTH WIDTH HEIGHT • Hand control knob on each leg allows • (2) control knobs allow 25” vertical height adjustment from 26” to 34” in 1” increments. 2515 1½” 2½” 58” adjustment of wheel. MODEL LENGTH WIDTH HEIGHT MODEL DEPTH WIDTH HEIGHT 6642 63” 38” 26” - 34” 2518 8” 37½” 34” G. Model 5304 E. Model 5216 D. Model 6611 F. Model 5217 D. Model 6611 E. Model 5216 G. Model 5304 Powder Board Table Exercise Hand Skate Quadriceps Board FEATURES: FEATURES: FEATURES: • Ideal for range of motion exercises. • Padded brown vinyl surface with (1) VELCRO® • Strengthens quadriceps on bed, mat or table. • Smooth, scratch resistant, oak laminate. brand fasteners to secure hand in position. • (10) positions to suit patient’s needs. • Folding legs for easy storage. • Exercise skate is mounted on nylon ball rollers • Tan vinyl padded surface. for quiet, easy use. • Natural Finish hardwood construction. MODEL LENGTH WIDTH HEIGHT MODEL LENGTH WIDTH HEIGHT • Folds flat when not in use. 6611 40” 29” 7”(open) 5216 5½” 5½” 1½” MODEL LENGTH WIDTH HEIGHT 5304 (open) 28” 5” 7”-13” F. Model 5217 Large Exercise Skate • Similar to #5216 but with (2) VELCRO® brand fasteners to secure hand/arm. MODEL LENGTH WIDTH HEIGHT 5217 12” 6” 1½” 57
    • REHAB AIDS AND STRENGTH TESTING A. Transfer Boards B. Model 5085 C. Model 2623 5087 5086-30 5087-30 A. Models 5086, B. Model 5085 5086-30, 5087, 5087-30 Bariatric Wood Transfer Board Hardwood Transfer Boards FEATURES: FEATURES: • 500 lb. Patient weight capacity. • Made of solid, smooth-finish 5⁄8 ” maple • 5⁄8 ” thick Birch Plywood with tapered ends. hardwood. Tapered ends for easy use. • Two perpendicular Hand Slots. • Facilitates patient transfer from wheelchair to bed, chair, toilet, etc. MODEL LENGTH STYLE MODEL LENGTH STYLE 5086 (not shown) 8” x 24” Two Cutouts 5085 35” x 8” Two Cutouts 5086-30 8” x 30” Two Cutouts 5087 8” x 24” No Cutouts C. Model 2623 5087-30 8” x 30” No Cutouts Door Mounted Pulley FEATURES: • Overhead pulley mounts on top of any D. Model 8998 F. Model 8996 standard hinged door. • Operates with a 2” nylon bearing swivel and includes rope and (2) handles. • For light duty upper extremity exercise. MODEL DEPTH WIDTH HEIGHT 2623 16” 2½” 6” H. Model 5542 F. Model 8996 360° 12” Plastic Goniometer FEATURES: D. Model 8998 • Scale reads in 1° increments. Bubble Inclinometer • 12” ISOM HiRes™. • Economical method of measuring joint range • Sold in units of (1) each. of motion. E. Model 8999 G. Model 8997 H. Model 5542 Twist-n-Bend™ Bars FEATURES: • Flexible rubber hand bar exerciser is designed to strengthen arms and hands. • Bars have progressive degree of resistance. • Color-coded for ease of use. • All bars are same length (12” x 1 3⁄4 ” dia.) E. Model 8999 G. Model 8997 MODEL DESCRIPTION Digital Inclinometer Attachment 5542 Set of (6) Twist-n-Bend Bars • Digital device facilitates measurement of FEATURES: ROM. Comes with case. • Snaps on #8996. Enables measurements from absolute vertical and horizontal. 58
    • THERAPY AND REHAB EQUIPMENT A. Model 8988 Shown with B. Model 8992 option 8989 Option: 8993 – Dual Grip Handle A. Model 8988 B. Model 8992 Common Features 500 lb. Wrist/Forearm 250 lb. Push-Pull BASELINE ® DYNAMOMETERS & GAUGES – Dynamometer Dynamometer MODELS 8981, 8983, 8988, 8992: SPECIAL FEATURES: SPECIAL FEATURES: • Time proven, hydraulic system • Includes door knob grip to measure • Measures push, pull, and lift forces. with analog (dial) readout. supination/pronation. • Can be used with 8986 Lift Platform on pg 61. • Maximum reading remains until unit MODEL DESCRIPTION MODEL DESCRIPTION is reset. 8988 Waist/Forearm Dynamometer 8992 Push-Pull Dynamometer with 3 different • Strength measurement reads in lbs. w/door knob grip push pads, 1 pull hook, 1 snap-lock hook and kg. • Comes with portable carrying case (not shown) OPTIONS FOR MODEL 8988 OPTION FOR MODEL 8992 • Made in the USA. CE certified. 8989 – Shovel handle accessory 8993 – Dual grip handle 8990 – Table mount bracket (not shown) C. Model 8981 D. Model 8983 E. Model 5096 E. Model 5096 Economy Push Up Blocks, Set of 2 • Ideal for upper extremity exercise and strength conditioning. C. Model 8981 D. Model 8983 • Black metal tubular construction. 50 lb. Pinch Gauge 200 lb. Hand Dynamometer • 6” Fixed handle height x 10” L x 7” W. FEATURES: SPECIAL FEATURES: • Comfortable foam handle grips. • Equipped with (4) non-skid rubber feet. • 50 lb. standard head hydraulic pinch gauge • Popular therapy device accurately measures has 2 1⁄2 ” dia. head and accurately measures hand strength. • 300 lbs. Per pair patient weight capacity. pinch strength. Includes carrying case. MODEL WIDTH LENGTH HEIGHT MODEL DESCRIPTION MODEL DESCRIPTION 5096 10” 7” 6” 8981 50 lb. Pinch Gauge 8983 Hand Dynamometer 59
    • WORK-WELL™ SYSTEM A. SYSTEM III 8901 8920 2216 8930 8940 8950 8952 Work-Well System II: A. Work-Well System III: Common Features Intermediate Package Extended-Capacity Package WORK-WELL™ WORK SPECIAL FEATURES: SPECIAL FEATURES: CONDITIONING SYSTEMS I, II, III: Same as System I, with the addition of: Same as System II, with the addition of: • Work conditioning apparatus designed • 8930 – Sled Station • 8920 – Shovel Station, Shovel, Sand for assessment, functional capacity evaluation and work simulation. MODEL CONSISTS OF • 8940 – Work Table (see page 66) • 8950 – Ergo Chair • Natural Oak high pressure laminate System II (8) components as listed protective finish. MODEL CONSISTS OF • You may purchase the systems listed System III (11) components as listed here or purchase individual components. Work-Well System I: Start-Up Package B. Model 8925 SPECIAL FEATURES: Multi Purpose Bolt Module • 8901 – Lift & Place Rack Station FEATURES: • 8911 – Carry-All Weight Box • Bolt board can be used either • 8912 – Tool Kit Weight Box horizontally, vertically, at a 45° angle, • 8913 – Stockroom Crate Weight Box or in #8901 rack. • 8914 – Packing Carton Weight Box • Includes (30) various bolts and nuts in (5) • 8952 – Set of 16 Disc Weights different types and sizes. Includes • 2216 – Foot Stool (2) screwdrivers, (2) wrenches, (1) Allen wrench. • Protocol manual included MODEL WIDTH DEPTH HEIGHT MODEL CONSISTS OF 8925 28” 17” 18” System I (7) components as listed B. Model 8925 60
    • THERAPY AND REHAB EQUIPMENT E. Model 8930 D. Model 8920 C. Model 8901 C. Model 8901 D. Model 8920 E. Model 8930 Lift & Place Rack Station Shovel/Levering Station Push-Pull Sled Station FEATURES: FEATURES: FEATURES: • Simulates lifting and loading tasks. • Simulates tasks that involve shoveling, • Simulates push-pull work tasks. • (2) adjustable Oak high pressure laminate levering and lifting objects or materials. • Ergonomic grip handles at each end of sled shelves “lock” into side mounted rails. • (3) Fixed “gravity flow” angled shelves. at (3) different height levels. • Upper shelf adjusts from 53” to 59” high. • Slip-resistant treads. • (4) removable weight pins with locking collars • Lower shelf adjusts from 28” to 34” high. • Plastic scoop shovel and shovel hook. for optional Disc Weights. • Each adj. shelf has 100 lb. weight capacity. • Includes 100 lbs. of pre-washed, hygienic, • Self-lubricating polyethylene sled runners. • Rack station must be secured to wall. dust-free sand. • Not designed for use on carpet. MODEL WIDTH DEPTH HEIGHT MODEL WIDTH DEPTH HEIGHT MODEL WIDTH LENGTH HEIGHT 8901 30” 18” 78” 8920 36” 72” 61” 8930 24” 40” 46” H. F. Model 8913 J. Model 8986 Model 8911 G. Model 8912 I. Model 8914 G. Model 8912 J. Model 8986 Common Features “Tool Kit” Weight Box Lift Platform WEIGHT BOXES — MODELS • Fixed wooden tote handle. 16 lb. empty. • Made of durable cast polyurethane. 8911, 8912, 8913, 8914: MODEL WIDTH DEPTH HEIGHT • Large 24” x 24” non-skid platform with 5 ft. • (2) hand grip slots each side. adjustable length chain and (1) threaded oval. • 3⁄4” Plywood core covered with high 8912 19” 14” 14” • Model 8992 Push-Pull Dynamometer and pressure Oak laminate protective finish. #8993 Dual Grip Handle are sold separately • Durable dowel construction. H. Model 8913 (see page 59). • Includes one removable metal 1” dia. “Stockroom Crate” Weight Box MODEL LENGTH WIDTH HEIGHT weight pin with locking collar to accom- • Box is 17 1⁄2 lb. empty. 8986 24” 24” 1” modate optional #8952 disc weights. MODEL WIDTH DEPTH HEIGHT 8913 17” 17” 14” Model 8952 (see p. 60) Disc Weight Set of (16) F. Model 8911 I. Model 8914 • (4) 2 1⁄2 lb., (8) 5 lb., (4) 10 lb. discs. “Carry-All” Weight Box “Packing Carton” Weight Box • Fixed wooden tote handle. 12 1 ⁄ 2 lb. empty. MODEL CONSISTS OF • Hinged lid to conceal contents. 17 lb. empty. MODEL WIDTH DEPTH HEIGHT 8952 (16) disc weights as listed MODEL WIDTH DEPTH HEIGHT 8911 14” 14” 14” 8914 14” 14” 14” 61
    • S TA N D - I N TA B L E S A. Model 6100 A. Model 6100 Front view Hydraulic Adjustable Stand-in Table FEATURES: • Front-mounted hand activated hydraulic lift adjusts height from 41” to 58”. Model 6100 Reverse view • 41” x 31” White Leather high pressure laminate top with 19 1⁄2 ”x 17” patient cut out. • Non-slip ramp with parallel bars for lift assist. • Padded back and knee support holds patient in standing position. • Sliding pocket door closes to secure patient. • Natural Oak laminate enclosure and base. MODEL LENGTH DEPTH HEIGHT 6100 41” 31” 41”- 58” B. Model 6125 Economy Stand-In Table FEATURES: • Basic adult model is designed B. Model 6125 Reverse view to promote vertical weight bearing activities. • Height of standing platform can be adjusted Model 6125 in 10” vertical range. Front view • Standing platform has anti-slip treads. • Laminate top is 30” x 30” with 15” wide x 12” deep cutout. • Adjustable height padded knee rest. • Inside space in table is 16”W x 14”D. • Door has heavy duty hinges and positive latch to secure patient safety in table. • Folkstone Gray laminate. MODEL LENGTH DEPTH HEIGHT 6125 30” 30” 45” C. Model 6185 Bariatric 500 lb. Electric C. Model 6185 Stand-In Table FEATURES: • Motorized height adjustment of top from 42½” to 52½”. • Unit can Power Lift 500 Lb. patient from sitting to standing position. • Hand Control adjusts height and lift. • Extra-wide Raised Rim Laminate Top is 40½” wide x 25½” deep with 26”W cutout. • Padded knee, chest and back supports. • Includes patient lift harness. • Retractable, swiveling casters with brake handle. • 115V, 60 Hz, 3.5 amps. U.L. Listed MODEL WIDTH DEPTH HEIGHT 6185 43” 42” 42 ½” - 52 ½” 62
    • THERAPY AND REHAB EQUIPMENT A. Model 6175 A. Model 6175 Front view Hi-Lo Econo-Line Stand-In Table with Electric Patient Lift FEATURES: Model 6175 • Motorized height Reverse view adjustment of top. • Motorized patient lift can elevate a 300 lb. patient from sitting to standing position. • Durable White Leather high pressure laminate top 33” wide x 24” deep. Cutout size is 19” wide x 10” deep. • Hand control operates electric table-top height and motorized patient lift. • Includes lift support harness. • Padded knee, chest and back supports. • Heavy gauge steel frame in cream powder coated finish. • Frame base is 36 1⁄2 ” wide x 42” deep. • (4) locking 3” diameter heavy-duty casters. • 110V, 60 Hz, 3.5 amps. MODEL WIDTH DEPTH HEIGHT 6175 36½” 42” 42½”- 52½” B. Model 6180 B. Model 6180 Hi-Lo Stand-in Table with Electric Patient Lift FEATURES: • Motorized height adjustment of top. • Unit can power lift a 350 lb. patient from sitting to standing position. • Hand control operation. • 33 1⁄2 ” x 25” laminate top with raised rim. Cutout size is 19”W x 10”D. • Padded knee, chest and back supports holds patient in standing position. • Heavy gauge steel powder coated frame. • Retractable locking swivel casters. • 110V, 60 Hz, 3.5 Amps. U.L. Listed. • Frame base is 37” wide x 42” deep. MODEL WIDTH DEPTH HEIGHT 6180 37” 42” 42½”- 52 ½” 63
    • H I - L O W O R K TA B L E S Common Features CLINICAL HYDRAULIC WORK TABLES — MODELS 4300, 4320: • Hand crank operated hydraulic system provides 14” height range. • Oak laminate chassis and base plate. • For sitting, standing or wheelchair use. A. Model 4320 A. Model 4320 Crank Hydraulic Work Table SPECIAL FEATURES: • Natural Oak 1 1⁄8 ” high pressure laminate top 66”x 48”. • Accommodates up to (4) patients. MODEL LENGTH WIDTH HEIGHT 4320 66” 48” 29”- 43” B. Model 4300 Crank Hydraulic Work Table B. Model 4300 SPECIAL FEATURES: • Natural Oak 1 ⁄8 ” high pressure laminate top 1 60” x 36”. • Space for (2) wheelchairs and therapist. MODEL LENGTH WIDTH HEIGHT 4300 60” 36” 29”- 43” C. Model 4335 Round Hydraulic Work Table FEATURES: • Hydraulic foot activated mechanism raises height from 28 1⁄2 ” to 34” high. • 48” diameter 11⁄8 ” Oak high pressure laminate C. Model 4335 top swivels 360° and locks in place. • Table accommodates up to (4) patients. MODEL DIAMETER HEIGHT 4335 48” 28½”- 34” 64
    • THERAPY AND REHAB EQUIPMENT A. Model 4380 Powermatic® Work Table FEATURES: • Electrical power height adjustment from 27” to 39” with hand control. • Heavy duty Natural Oak high pressure laminate 11⁄8 ” top 66” x 48” for up to (4) patients. • Black laminate lift enclosure and base plate with levelers. • Thermal overload protection. • Hospital grade plug. • 110V, 60 Hz, 3.5 Amps. U.L. Listed. A. Model 4380 MODEL LENGTH WIDTH HEIGHT 4380 66” 48” 27”- 39” Table elevates B. Model 4375 up to 43” high Electric Work Table FEATURES: • Superior performance at economy cost. • Direct-drive electric lift mechanism elevates top from 27” to 43” high. • Ideal height range for sitting, standing or wheelchair use. • Sleek, compact pedestal design offers more leg room for patients. • 36” x 60” Natural Oak high pressure laminate top with black protective bullnose molding on perimeter edge. • Black laminate base plate with leveling legs. • Easily accommodates (4) ambulatory patients or (2) wheelchairs and therapist(s). • Hand Control Panel is conveniently mounted under work surface. • 110V, 60Hz, 1.8 Amps. B. Model 4375 • Hospital grade plug. with Table at • U.L. recognized electrical components. wheelchair height MODEL LENGTH WIDTH HEIGHT 4375 60” 36” 27” - 43” 65
    • W O R K A N D H A N D T H E R A P Y TA B L E S A. Model 4324 B. Model 4325 A. Models 4324, 4327 B. Model 4325 Common Features Crank Hi-Lo Table Deluxe Crank Butcher Block CRANK GEAR HEIGHT, HI-LO WORK TABLES— SPECIAL FEATURES: Work Tables MODELS 4324, 4325, 4326, 4327: • Natural Oak high pressure laminate top SPECIAL FEATURES: 11 ⁄ 8 ” thick. • Premium 13 ⁄ 4 ” thick Butcher Block top. MODEL LENGTH WIDTH HEIGHT MODEL LENGTH WIDTH HEIGHT • Convenient crank gear height adjustment 4324 60” 28” 26”- 38” 4325 60” 28” 26”- 38” from 26” to 38”. • Crank handle is retractable. 4327(not shown) 66” 48” 26”- 38” • Accommodates wheelchair or ambulatory patients. C. Models 4326 • Heavy gauge steel frame, powder coated Deluxe Crank Hi-Lo in neutral cream finish. Butcher Block Work Table SPECIAL FEATURES: • Premium 13 ⁄ 4 ” thick Butcher Block top. D. Model 8940 MODEL LENGTH WIDTH HEIGHT Laminate Work Table 4326 66” 48” 26”- 38” FEATURES: • Natural Oak high pressure laminate legs with H-brace and apron. MODEL LENGTH WIDTH HEIGHT 8940 48” 30” 32” C. Model 4326 D. Model 8940 66
    • THERAPY AND REHAB EQUIPMENT A. Model 4343 B. Model 4346 Leaf detail A. Model 4343 B. Model 4345, 4346, 4347 Common Features Hand Therapy Table Hi-Lo ADA Expandable Table THERAPY TABLES – MODELS 4343, 4345, 4346, 4347 • White Leather 11⁄8 ” high-pressure laminate • White Leather 11⁄8 ” thick high pressure • Easy-to-operate Crank top with T-molding edges has 4” x 24“ laminate tops with T-molding edges. Hydraulic Lift system adjusts table from cutouts in front and back for easy therapist- • Includes (2) 12” Folding Leaves on each end 27” to 39” high for sit-down, stand-up or patient use. to accommodate (2) additional patients. wheelchair use. MODEL LENGTH WIDTH HEIGHT MODEL LENGTH WIDTH HEIGHT • Crank handle folds out of the way when not in use. 4343 48” 32” 27” - 39” 4345 (not shown) 48” - 72” 32” 27” - 39” • Extruded aluminum telescoping legs with 4346 60” - 84” 32” 27” - 39” tubular metal base with levelers. 4347 (not shown) 72” - 96” 32” 27” - 39” C. Model 6282 E. Model 6284 D. Model 6283 Common Features C. Model 6282 Hand Therapy Table E. Model 6284 Mobile Therapy Table “SPRING POWER” THERAPY TABLES — MODELS 6282, 6283, 6284: • Compact top facilitates use. • 32” x 24” top has 19”W x 6”D cutout. • Equipped with (4) leveling legs. • (4) 2” twin-wheel nylon casters. MODEL LENGTH DEPTH HEIGHT MODEL LENGTH DEPTH HEIGHT • Height of “spring-powered” table can be 6282 32” 18” 26½”- 40½” 6284 32” 24” 28 ½”- 42 ½” easily adjusted with dual hand control levers. • 14” height range allows easy use sitting, standing or in wheelchair. D. Model 6283 OPTION FOR MODELS 6282, 6283 Hand Therapy Table with Drawer • Folkstone Gray high pressure laminate 075 – Set of (4) 2” nylon locking casters • Same as 6282 but with Drawer. 3 ⁄4 ” tops. (increases height by 2”) • Black epoxy heavy-duty dual steel uprights MODEL LENGTH DEPTH HEIGHT and “U” base provide excellent stability. 6283 32” 18” 26 ½”- 40 ½” 67
    • W O R K A N D A C T I V I T Y TA B L E S A. Model S-740 B. Model 6272 Model 6272 shown with smooth side up A. Models S-740, S-745 B. Model 6272 Econo Work Table ReversABLE™ Activity/Hand Therapy Table FEATURES: • Sturdy rectangular work table has no apron FEATURES: to accommodate wheelchair patient. • Quarter-round design accommodates two • Easy-grip plastic pegs are stackable and ideal seated or wheelchair patients. for hand therapy and cognitive activities. • Durable Gray high pressure laminate 11⁄8 ” laminate top with T-molding edge. • (2) 16” x 16”– 360° rotating inserts. Pegboard • White Leather high pressure laminate 11⁄2 ” top. • (4) adjustable height metal legs. on one side and a smooth laminate on reverse. • (5) adjustable height metal legs. • Hand control knob on each leg allows • 360° rotating insert can be locked in • Hand control knob on each leg allows 1” adjustments from 26” to 34”. horizontal position or at 60° angle. 1” adjustments from 26” to 34”. MODEL LENGTH WIDTH HEIGHT • Includes (2) latex-free Blue Crepe Rubber 100 MODEL FRONT RADIUS DEPTH HEIGHT S-740 48” 32” 26”- 34” hole Pegboard Pads and (100) plastic pegs. 6272 94” 28” 26”- 34” S-745 (not shown) 60” 36” 26”- 34” C. Model 6674 Horseshoe Therapy Table FEATURES: C. Model 6674 • U-shape top accommodates up to (4) wheelchair patients. • Durable, White Leather high pressure laminate 11⁄8 ” top is 72” x 48” O.D. Inside space for therapist is 36”W x 30”D. • Top is only 18” deep for easy access. • (5) adjustable height metal legs. • Hand control knob on each leg allows 1” adjustments from 26” to 34”. MODEL LENGTH WIDTH HEIGHT 6674 72” 48” 26”- 34” 68
    • THERAPY AND REHAB EQUIPMENT Common Features HEIGHT ADJUSTABLE ACTIVITY TABLES — A. Model 4333 MODELS 4333, 4334, 6650, 6654: • Multi-purpose wheelchair accessible tables ideal for work, play or any activity. • (4) Manually adjustable height metal legs. • Hand control knob on each leg allows 1” adjustments from 26” to 34” high. A. Model 4333 48” Round Table • 1 1⁄8 ” thick Natural Oak high pressure laminate top with T-molding. • Accommodates (4) wheelchair patients. MODEL DIAMETER HEIGHT 4333 48” 26” - 34” B. Model 4334 B. Model 4334 4-Cutout Table • 48” clover-shaped Table will accommodate up to (2) wheelchairs or (4) regular Side Chairs. • Durable Natural Oak high pressure laminate 1 1⁄8 ” top with T-molding. • Each cutout is 22“ wide x 2” deep to facilitate patient use. MODEL LENGTH WIDTH HEIGHT C. Model 6650 4334 48” 48” 26” - 34” C. Model 6650 Oval Extension Table • Durable White Leather high pressure laminate 1 1⁄8 ” top with T-molding edging. • Table is equipped with (2) 12” extension leafs which allow you to expand length from 60” to maximum of 84” long. • Accommodates up to (6) wheelchair patients. MODEL LENGTH WIDTH HEIGHT 6650 60” - 84” 36” 26”-34” D. Model 6654 A.D.A. Game Table • Colorful game table graphics, including checkers, chessboard and backgammon, are permanently embedded into laminate 1 1⁄8 ” top with Black 3mm edges. • Game table can accommodate (4) side chairs for cards or board games or (2) wheelchairs for checkers or chess. MODEL LENGTH WIDTH HEIGHT D. Model 6654 6654 36” 36” 26”-34” 69
    • M O B I L E T H E R A P Y C A B I N E T S / PA R A L L E L B A R S A. Model 6690 B. Optional Model 2525 Cubex™ Therapy System Finger Ladder on Wheels FEATURES: • Adjustable height 27” to 37” foldaway 90° bolt-board work surface on right side. Includes 24 assorted bolts and (2) screwdrivers, (2) wrenches, (1) Allen wrench. • Adjustable height 27” to 37” foldaway work surface with pegboard pad on left side. Elevates to 60° or 90°. • Folkstone Gray laminate. • Durable dowel and glue construction. • 4” twin-wheel locking casters. • Includes (100) plastic stackable pegs. • Slide-out laminate work surface in rear. • Reversible Activity Board in top has pegboard pad on one side and smooth easel on the other side. Board rotates 360° and locks in flat or at 60° angle. • Two door cabinet with lock and (4) tubs. MODEL LENGTH DEPTH HEIGHT 6690 38” 24” 38” B. Model 2525 Table Mounted Finger Ladder FEATURES: A. Model 6690 • (15) peg holes in each of (3) sides. • (50) plastic stackable pegs and C-Clamp. MODEL LENGTH DEPTH HEIGHT 2525 2½” 2½” 34” View with easel side up C. Model 6695 C. Model 6695 Mobile Cabinet for Splinting (splinting pan and Supplies not included) FEATURES: • Grab-bar handle for mobility on left side. • Door cabinet on right with lock. • High impact polystyrene drawer. • (3) vertical cubby sections for splinting material behind hinged door. • Folkstone Gray laminate. • Durable dowel and glue construction. • 4” twin-wheel locking casters. • Splinting pan is not included. MODEL LENGTH DEPTH HEIGHT 6695 42” 24” 31” 70
    • THERAPY AND REHAB EQUIPMENT Common Features PARALLEL BARS – MODELS 1340, 1342, 1386, 1388: • 11⁄2 ” diameter one-piece stainless steel A. Model 1386 handrails. • Heavy gauge steel base plates, uprights and fittings. Black powder coated protective finish. • Each upright telescopes in 1 1⁄2 ” increments and locks into (10) height positions with fail-safe locking pin. • Width adjusts with ergonomic control knobs on each upright. A. Model 1386 Bariatric Parallel Bars, Height & Width Adjustable SPECIAL FEATURES: • Designed to accommodate Bariatric patients. 600 lb. weight capacity. • 10 ft. long gray laminate platform with anti-slip surface treads and tapered ends B. Model 1388 for wheelchair use. • (6) steel uprights. • Width adjusts from 22” to 35”. • 38” standard clearance between uprights. MODEL LENGTH WIDTH * HEIGHT 1386 10’ 22” - 35” 29” - 42” *Platform is 45” wide. B. Model 1388 Floor Mounted Bariatric Parallel Bars SPECIAL FEATURES: • (6) floor-mounted uprights with mounting plates. Floor fasteners not included. • Width adjusts from 22” to 35”. MODEL LENGTH WIDTH HEIGHT 1388 10’ 22” - 35” 29” - 42” C. Model 1340 C. Models 1340,1342 Floor Mounted Parallel Bars SPECIAL FEATURES: • (4) Floor-mounted uprights with mounting plates. Floor fasteners not included. • Width adjusts from 15” to 28” wide. MODEL LENGTH WIDTH HEIGHT 1340 10’ 15”- 28” 29”- 42” 1342 (not shown) 12’ 15”- 28” 29”- 42” 71
    • PA R A L L E L B A R S A. Model 1319 A. Models 1318, 1319 Folding Parallel Bars SPECIAL FEATURES: • Designed to easily fold to save space. • Unit is only 10” wide when folded. • Height adjustable from 28” to 41”. • Fixed width dimension of 25”. MODEL LENGTH WIDTH HEIGHT 1319 7’ 25” 28”- 41” 1318 (not shown) 9’ 25” 28”- 41” Common Features Model 1319 (folded) PARALLEL BARS — MODELS 1318, 1319, S-320: • 1 1⁄2” diameter stainless steel handrails B. Model S-320 for easy use and durability. Econo Platform Mounted • Heavy gauge steel base plates, Parallel Bars uprights and fittings. Black powder SPECIAL FEATURES: coated chip and wear resistant finish. • Folkstone Gray laminate platform with tapered • Each upright telescopes up in 1 1⁄2” ends and anti-slip rubber treads. increments and locks into (10) height • Height and width adjustable bars. positions with fail-safe ball-tip MODEL LENGTH WIDTH * HEIGHT locking pin. S-320 10’ 15”- 28” 28”- 41” *platform is 36”wide B. Model S-320 C. Model 1316 C. Model 1316 Wall Folding Parallel Bars FEATURES: • Mounts against wall and folds with VELCRO® brand fastening straps. • Folded bars are only 14” deep. • 7’ long stainless steel handrails. • Fixed width of handrails is 25”. • Height is adjustable from 26” to 39”. • (2) uprights extend into room and quick-mount to fixed floor plates. • Neutral cream powder coated finish. MODEL LENGTH WIDTH HEIGHT 1316 7’ 25” 26”- 39” 72
    • THERAPY AND REHAB EQUIPMENT A. Model 1390 Common Features PLATFORM MOUNTED PARALLEL BARS– MODELS 1300, 1390, 1391, 1392: A. Models 1390, 1391, 1392 B. Model 1300 • Satin-finish hardwood platform with Height & Width Adjustable Height Adjustable Parallel Bars tapered hardwood ends for easy Parallel Bars MODEL LENGTH WIDTH * HEIGHT wheelchair access. SPECIAL FEATURES: 1300 10’ 26” 28”- 41” • (2) “anti-slip” treads on each end. • Width adjusts from 15” to 28” with • 1 1⁄2” diameter one-piece stainless steel ergonomic control knobs on each upright. *platform is 38”wide handrails. • 30” clearance between uprights. • Heavy gauge black powder coated steel OPTION MODEL LENGTH WIDTH * HEIGHT FOR PLATFORM PARALLEL BARS uprights and fittings. • Each upright telescopes up in 1 1⁄2” 1390 10’ 15”- 28” 29”- 42” *62 – Abduction Board increments and locks into (10) height 1391 7’ 15”- 28” 29”- 42” *63 – Non-slip Matting positions with fail-safe ball-tip 1392 12’ 15”- 28” 29”- 42” *FACTORY INSTALLED locking pin. *platform is 38”wide B. Model 1300 73
    • P O W E R PA R A L L E L B A R S Digital Height Readout A. Model 1398 Model 1398 Balance Beam A. Model 1398 • Placement Ladder consists of (11) variably Model 1396 (not shown) Patented Mobility Platform placed Ladder Steps. Power Height Parallel Bars with Electric Height Bars • Each Ladder Step has dowel pins, which fit into grommeted holes of platform. The FEATURES: spacing and location of Ladder Steps can be • Motorized height adjustment easily adjusted for patient’s gait training. FEATURES: from 29” to 44” high. • Balance Beam is 6’5” long x 6” wide x • Same features as Model 1398 except • (4) Direct-drive synchronized lifting columns. 3” high. Balance Beam is equipped with platform has no dowel holes and does not • Control panel located near entry end of bars. anti-slip surface and dowel pins. include Ladder Steps or Balance Beam • Push button controls and digital bar height • Tapered ends with anti-slip tread for easy apparatus. readout. wheelchair access. • 1 1⁄2 ” dia. Stainless Steel handrails. • Control box is double insulated for safety and • Width adjusts manually from 15” to 28” wide equipped with 2-prong plug and cord. with easy-to-use control knobs. • 110V, 60Hz, 2.5 Amps. • Width between uprights is 26 1⁄2 ”. MODEL LENGTH WIDTH * HEIGHT MODEL LENGTH WIDTH * HEIGHT • 10’ Satin-finish hardwood platform with 1398 10’ 15”- 28” 29”- 44” 1396 10’ 15”- 28" 29”- 44" recessed grommeted holes on surface. *platform is 38”wide *platform is 38”wide B. Model 1393 B. Model 1393 Patented Ambulation and Mobility Platform FEATURES: • U.S. Patent No. 5,924,960. • Same manual height and width adjustable platform as Model 1390 (see pg. 73) with the following added features: • Placement Ladder consists of (11) variably placed ladder steps. • Balance Beam 6’5”L x 6”W x 3”H with non-slip treads. • Apparatus has dowel pins that fit into pre-drilled holes on platform surface. MODEL LENGTH WIDTH HEIGHT 1393 10’ 15”- 28” 29”- 42” *platform is 38”wide 74
    • THERAPY AND REHAB EQUIPMENT A. Model 1362 Common Features POWER PARALLEL BARS — A. Models 1362, 1363 Models 1361, 1364 MODELS 1361, 1362, 1363, 1364: Power Height and Width Power Height Parallel Bars Parallel Bars SPECIAL FEATURES: SPECIAL FEATURES: • Can be used by adults and children. • Motorized height adjustment from 27” to 37” . • Motorized width adjustment of handrails from • Width adjusts manually from 15” to 27”. 13” to 25”. • Includes brackets to lower handrails to child • Convenient hand control adjusts bars. • 1 5 ⁄8 ” diameter stainless steel handrails. • Model 1363 15’ long has (6) uprights. height.* • 34” wide wood platform is covered in • Model 1364 15’ long has (6) uprights. textured gray styrene. MODEL LENGTH WIDTH HEIGHT MODEL LENGTH WIDTH HEIGHT • Tapered ends for wheelchair access. 1362 10’ 13”- 25” 27”- 37” 1361 (not shown) 10’ 15”- 27” 27”- 37”* • Removable Abduction Board. 1363 (not shown) 15’ 13”- 25” 27”- 37” 1364 (not shown) 15’ 15”- 27” 27”- 37”* • Manual crank override. • Steel uprights are powder coated in neutral *child height is 17” - 27” cream finish. • 30 1⁄2” clearance between uprights. • Hospital grade plug. • 110 V, 60Hz, 3 Amps, UL Listed. B. Models 1365,1366 Crank Height Platform Bars B. Model 1365 FEATURES: • Hand crank height adjustment of each stainless steel handrail 26” to 39”. • 34” wide wood platform covered with non- slip textured styrene in cream finish. • Tapered ends for wheelchair access. • Hand controls allow easy adjustment of width from 16 1⁄2 ” to 24 1⁄2 ”. • Ruled height and width adjustments. • Model 1366 15’ long has (6) uprights. • Includes removable Abduction Board. MODEL LENGTH WIDTH HEIGHT 1365 10’ 16½”- 24½” 26”- 39” 1366*(not shown) 15’ 16½”- 24½” 26”- 39” *1366 not Quick Ship 75
    • S TA I R C A S E S B. Model 1567 A. Model 1566 A. Model 1566 B. Model 1567 Common Features “Mini” Staircase Straight Staircase EXERCISE STAIRCASES — • Space Saver can fit in 8 ft. high ceiling. • Handrails enclose platform. MODELS 1560-65-036, 1566, 1567: • (2) 6” high steps and (3) 4” high steps. Steps • (4) 6” high x 30” wide steps. • Handrails and uprights are are 30” wide. • Platform is 30” wide x 24” deep x 24” high. satin-finished premium hardwood. • Platform is 30”W x 24”D x 12”H. • Handrails are ergonomically designed MODEL LENGTH WIDTH HEIGHT MODEL LENGTH WIDTH HEIGHT for comfortable grip and ease of use. • Stairs are finished in Natural Oak 1566 52” 30” 12” 1567 52” 30” 24” laminate with “anti-slip” safety treads on all steps and platform. C. Model 1560-65-036 • Requires 9 ft. minimum ceiling Convertible Staircase (1567 and 1560 - 65- 036 only) • Sets up and converts to straight or corner. • (4) 6” H x 36” W steps on one end. (6) 4” H x 36” W steps on the other end. • 36” x 36” x 24” high platform. MODEL LENGTH WIDTH HEIGHT 1560-65-036 109” 36” 24” Corner 64” x 82” 36” 24” C. Model 1560-65-036 Corner setup Straight setup 76
    • THERAPY AND REHAB EQUIPMENT A. Model 1564 A. Model 1564 Bariatric ADA Two-Sided Staircase • Natural Oak high pressure laminated reinforced plywood construction for 750 lb. patient weight capacity. • (2) 6” high steps on one side and (3) 4” high steps on the other side. • Steps are 38” wide x 11” A.D.A. Depth • Platform is 38” wide x 27” deep x 12” high. • Solid laminated plywood side panels with ergonomic easy-to-grip hardwood handrails. • Handrails have 12” ADA extension beyond bottom steps. • Shipped ready-to-assemble. MODEL LENGTH WIDTH HEIGHT 1564 84”* 40” 46” *Including 12” handrail extensions View of 6” steps B. Model 1570 Patented 3-in-1 Training Staircase FEATURES: B. Model 1570 • U.S. Patent No. D.428,629. • Unique training staircase device allows the therapist to train patients on (3) progressive step levels (4”– 6”– 8”). • (6) 4” high steps on one end. • (4) 6” high steps on other end. • (3) 8” high steps at front side. • Steps are 36” wide platform is 36”x 36”. • Handrail for 8” stair section is easily removable and locks into place. • Requires minimum of 9 ft. high ceiling. MODEL LENGTH WIDTH HEIGHT 1570 109” 56”* 24” *includes 8” high steps Model 1570 shown with removable hand rail for 8” high stairs 77
    • S TA I R C A S E S A N D A M B U L AT I O N A. Model 1580 A. Model 1580 ADA Convertible “Space-Saver” Staircase FEATURES: • More compact footprint takes up less space and fits in conventional 8’ high ceiling. • Staircase can be installed in straight line or 90° corner arrangement. • A.D.A. 11” deep Steps x 36” wide have “anti-slip” Safety Treads. • (3) 6” high steps on one end, and (4) 4 1⁄2 ” high steps on other end. • Platform is 36” x 36” x 18” high. • Handrails and uprights are satin-finish premium hardwood and shipped R.T.A. • Handrails are designed for ergonomic comfort and have 12” A.D.A. overhang. MODEL LENGTH WIDTH HEIGHT 1580 91” 36” 18” Model 1580 straight setup Corner 58” x 69” 36” 18” B. Model S-601 Econo Two-Sided Staircase FEATURES: • Two 6” steps and three 4” steps. • Steps and platform have “anti-slip” safety treads. • Platform is 30” W x 24” D x 12” H • Compact size can fit in 8’ ceilings. • Folkstone Gray laminate finish. • Ergonomic hardwood handrails. MODEL LENGTH WIDTH HEIGHT S-601 52” 30” 12” B. Model S-601 78
    • THERAPY AND REHAB EQUIPMENT A. Model 2410 B. Model 1200 A. Model 2410 B. Model 1200 MODEL LENGTH WIDTH HEIGHT Nested Footstools Ramp & Curb Set 1200 (closed) 88” 44” 8” FEATURES: FEATURES: Curb sizes 40” 40” 6” • Consists of (4) steps which “nest” together • Facilitates ambulation and patient mobility 36” 36” 4” for easy space-saving storage. training on ramp and curbs. • Nested footstools are useful for stepping, • Durable Oak laminate wood construction. 32” 32” 2” crawling or climbing activities. • Anti-slip safety matting on top surface of ramp Curbs can be set up to extend to right as • Durable oak laminate wood construction with and curb set. shown above or to the left (below) or straight. non-slip matting. • Ramp elevates from 1⁄4 ” to 8” high over its MODEL LENGTH WIDTH HEIGHT 44” incline. • Flat platform is 44” x 44”. 2410 (closed) 20” 16” 8” • Unit includes (3) curbs of 2”, 4” and 6” Stool Sizes: 20” 16” 8” height, which nest under ramp. 18” 14” 6” • Curbs can be set up to extend in any of 14” 12” 4” 3 directions or curbs can be removed from unit and used separately. 12” 9” 2” C. Model 1310 Balance Activity Platform FEATURES: • Adjustable height stainless steel support C. Model 1310 handrails. • Wood platform with safety treads. • For use with #2551 rocker board. MODEL WIDTH DEPTH HEIGHT 1310 36” 36” 28”- 41” D. Model 2551 Balance Board FEATURES: • Rectangular Board is made of durable cast polyurethane for easy portability. • 2” high Rocker for “basic” general use. • See page 80 for other balance boards for intermediate and advanced use. MODEL LENGTH WIDTH HEIGHT D. Model 2551 2551 18” 15” 3” 79
    • EXERCISE AND BALANCE TRAINING A. Series 255X a. b. c. B. Model 2570 d. e. A. Series 255X 5” 5” 7” 7” 9” Heavy-Duty Balance Boards FEATURES: • (3) rectangular Rockers and (2) round Wobble Boards in ascending heights for basic, intermediate and advance 2 lb. 4 lb. 7 lb. 11 lb. 15 lb. balance training. • Made of durable cast polyurethane for easy portability. B. Model 2570, 2570-100 MODEL LENGTH WIDTH HEIGHT Rebounder 2570 38½” 39” 7”- 42” CODE MODEL SIZE HEIGHT FEATURES: 2570-100 same but includes (5) balls a 2551 15” x 18” 2” Rocker • Adjustable angle rebounder can be used as b 2553 15” x 18” 2½” Rocker a plyometric ball return. Returns ball with c 2555 15” x 18” 3½” Rocker speed, force and angle consistent with throw. d 2557 15” dia. 2” Ball • Angle adjusts: 0, 28, 33, 39, and 42°. OPTION FOR MODEL 2570 • 27” diameter rebounding surface. 2571 – (1) set of 5 Rebounder Balls (see above) e 2559 15” dia. 3” Ball • Rebounder includes rack for balls. D. Model 2577 C. Model 2575 C. Model 2575 D. Model 2577 MVP™ System Multi-Axial Platform System (Multi-Axial Vestibular Platform) FEATURES: FEATURES: • Boards are made of durable cast • Boards are made of durable cast polyurethane. polyurethane. • Balls screw into board to provide variable • Insert 1 or 2 interchangeable instability balls vestibular challenge. for center wobble, off-center wobble or rocker action to vary activity. MODEL CONSISTS OF MODEL CONSISTS OF Instability Balls for both 2575 and 2577 are interchangeable. 2575 (10) color coded instability balls, (3) 2577 Reversible board, (5) progressive boards (16, 20 and 30” dia.) and 10 color coded ball set, (2) weight rods, ball holder 10 lbs. of disk weights and wall rack 80